Professional Documents
Culture Documents
Ray Fine 3D Fiber Laser User Manual
Ray Fine 3D Fiber Laser User Manual
,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
User manual
1
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
2
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
2. How to add authorization file
The first time you open the desktop and install the software, there will be such a
prompt as shown below; the first use of lenmark3D and lenmark3DS software needs
to import this authorization file.After the authorization file is imported, it can be
used.
3
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
4
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
5
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
After finding the focal length of the corresponding format with a ruler, find the
strongest light by adjusting the knob under the galvanometer. It Can work,As shown
below.
6
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
7
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
Note: Click the correction option, select the desired format, click apply,
and then in the z correct option, import the correction file of the
corresponding format, and click apply.After correct and z correct are
selected in the corresponding format, it can work normally.
8
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
After inputting the graphic size and position, first remove the check from the default
parameters, and set the filling and marking parameters as needed, such as filling
spacing, filling angle, filling method, marking speed, frequency, pulse width and
power parameters. You can mark .
9
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
10
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
11
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
12
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
Note: In the 3D working space, you can import a graphic in STL format,
or draw a plane graphic for marking, but it should be noted that the
highest point of the object to be processed must be the most surface of
the three-dimensional working space, that is, the Z axis Highest
13
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
position. If you want to engrave 3D graphics, you must use measures
such as blowing during the marking process, otherwise the deep
markings will accumulate debris in it.
14
LIAOCHENG RAY FINE TECHNOLOGY CO.,LTD
whatsapp/wechat:+8618263554087 www.rayfinetech.com
You can draw graphics in the software, add text, or import vector graphics according
to your needs. You can set the object size, fill, and set marking parameters. In order
to achievethe best marking effect.
This manual is a brief introduction about the machine. For specific
software instructions, please refer to the Lenmark Software Manual.
15