Professional Documents
Culture Documents
Dec30023 - Computer Networking Fundamentals Lab 4: Configure Wireless Access Point and Client
Dec30023 - Computer Networking Fundamentals Lab 4: Configure Wireless Access Point and Client
THEORY
The Linksys Wireless Router create a home Wi Fi network to which can connect to
computers, printers, game consoles and other Wi Fi devices. With transfer rates of
up to 300 + 300Mbps, this router can download files and access websites at rapid
speeds. Using four antennas, the Linksys E2500 router sends out a widespread
signal that establishes communication with the devices throughout your home. WEP,
WPA, WPA2 and a wireless MAC filter help this router keep your home network
secure. Five ports give you the space needed to connect wired devices to the home
router.
EQUIPMENT / TOOLS
PROCEDURE
Removing Modules: Drag the module from the device to the module list.
c. Click and drag Linksys-WPC300N to the empty slot behind router as shown
below.
d. Do the same step for Laptop ALI, Laptop HASSAN, PC AISYAH and PC
ASMAH.
e. Configure IP address for all Laptop and desktop according to below table.
Device
IP Address Subnet Mask
Designation
Wireless Router0 192.168.0.1 255.255.255.0
TASK 2: Configure security for Linksys router - Change default name for SSID.
Step 4: Configure security for LINKSYS router – Change default name for SSID.
a. Click the Wireless tab. The Basic Wireless Settings tab is selected by default.
b. Network Mode is selected to Mixed by default.
c. Click on the Radio Band drop-down menu and there are four options which is
Mixed, Wireless-A only, Wireless-N only and disable.
** For a wireless network that can use 802.11b, g, or n client devices, the default
is Mixed. Mixed allows the Wide Channel option to be chosen and gives the
best performance. Leave the default of Mixed selected.
d. The Network Name (SSID) is the name of your wireless network shared among
all devices on your network. It must be identical for all devices in the wireless
network. It is case-sensitive and must not be more than 32 characters.
Change the SSID from the Default to a unique name (suggestion: Your
name). Record the name you have chosen:
_____________________________________________
e. The AP is now configured for a wireless network with the name (SSID) that you
gave it. It is important to write down this information before starting attaching
any PCs to the wireless network.
f. Save your settings before going to the next screen.
b. Change your setting to the same as below picture. Add some protocol that can
be blocked by router.
c. Click on the Save Settings button.
TASK 6: Verify connectivity to Linksys router after setting have been changed
f. Do the same for Laptop ALI, Laptop HASSAN, PC AISYAH and PC ASMAH
Step 9: Verify connectivity to LINKSYS router after setting have been changed.
a. From Laptop KUMAR send packet to Linksys WRT300N.
b. Click Envelope on the right side.
c. Click Laptop KUMAR and Wireless Router.
d. Do the same for Laptop ALI, Laptop HASSAN, PC AISYAH and PC ASMAH.
e. Print screen the result.
**REPORT
Provide a report that include all the task given including all screenshot output. From
the OBSERVATION describe the output that got from the task. The report also must
include DISCUSSION and CONCLUSION.