Professional Documents
Culture Documents
LT Q39G - en
LT Q39G - en
com
LT Q39G
DATASHEET
LT Q39G
Datasheet
Published by ams-OSRAM AG
Tobelbader Strasse 30, 8141 Premstaetten, Austria
LT Q39G
Applications
- Electronic Equipment - White Goods
- Gaming, Amusement, Gambling
Features
- Package: SMT package 0603, colorless diffused resin
- Chip technology: InGaN on Sapphire
- Typ. Radiation: 170° (horizontal), 130° (vertical)
- Color: λdom = 530 nm (● true green)
- Corrosion Robustness Class: 3B
- ESD: 1 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM)
Ordering Information
Type Luminous Intensity 1) Ordering Code
IF = 5 mA
Iv
Maximum Ratings
Parameter Symbol Values
Characteristics
IF = 5 mA; TA = 25 °C
Parameter Symbol Values
Brightness Groups
Group Luminous Intensity 1) Luminous Intensity. 1) Luminous Flux 7)
IF = 5 mA IF = 5 mA IF = 5 mA
min. max. typ.
Iv Iv ΦV
3X 2.60 V 2.70 V
3Y 2.70 V 2.80 V
3Z 2.80 V 2.90 V
4X 2.90 V 3.00 V
4Y 3.00 V 3.10 V
Wavelength Groups
Group Dominant Wavelength 3) Dominant Wavelength 3)
min. max.
λdom λdom
2 520 nm 525 nm
3 525 nm 530 nm
4 530 nm 535 nm
5 535 nm 540 nm
Q1 2 3X
0,8
0,6
0,4
0,2
0,0
350 400 450 500 550 600 650 700 750 800
λ [nm]
Radiation Characteristics 7)
Irel = f (ϕ); TA = 25 °C
LT Q39G
ϕ [°]
-10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90°
-20° 1,0
Irel
-30° : 0°
: 90°
-40° 0,8
-50°
0,6
-60°
0,4
-70°
-80° 0,2
-90° 0,0
-100°
10
1
5 0,9
0,8
4
0,7
3 0,6
0,5
2
0,4
0,3
1
2,4 2,6 2,8 3,0
91
4
5
6
7
8
9
10
VF [V] 0,
IF [mA]
Dominant Wavelength 7)
Δλdom = f(IF); TA = 25 °C
LT Q39G
550
λ dom [nm]
545
540
535
530
525
520
2
10
12
14
IF [mA]
-0,02
1,0
-0,04
0,8
-0,06
-0,08
0,6
-0,10
-0,12 0,4
-0,14
0,2
-0,16
-0,18 0,0
30 40 50 60 70 80 30 40 50 60 70 80
Tj [°C] Tj [°C]
Dominant Wavelength 7)
5
0
-5
-10
30 40 50 60 70 80
Tj [°C]
16
14
TA TS
12
10
4
TA temp. ambient
2
TS temp. solder point
0
0 20 40 60 80 ˚C 100
T
T T
0.08 0.08
D=
0.07 0.005 0.07
0.01 D=
0.06 0.02 0.06 0.005
0.05 0.01
0.05 0.1 0.05 0.02
0.2 0.05
0.04 0.3 0.04 0.1
0.5 0.2
0.03 0.03 0.3
0.5
0.02 0.02
0.01 0.01
0 -5 0 -5
10 10-4 10-3 10-2 10-1 100 101 s 102 10 10-4 10-3 10-2 10-1 100 101 s 102
tp tp
Dimensional Drawing 9)
Further Information:
Approximate Weight: 1.0 mg
0.7 (0.028)
0.8 (0.031)
0.8 (0.031) 0.8 (0.031)
OHAPY606
For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not
suitable for ultra sonic cleaning.
150
tS
100
50
25 ˚C
0
0 50 100 150 200 250 s 300
t
TSmax to TP
Liquidus temperature TL 217 °C
Time above liquidus temperature tL 80 100 s
Peak temperature TP 245 260 °C
Time within 5 °C of the specified peak tP 10 20 30 s
temperature TP - 5 K
Ramp-down rate* 3 6 K/s
TP to 100 °C
Time 480 s
25 °C to TP
All temperatures refer to the center of the package, measured on the top of the component
* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range
Taping 9)
Reel Dimensions
A W Nmin W1 W2 max Pieces per PU
Barcode-Product-Label (BPL)
N s E RS
L
E
re
V
E
tiv
If
e
la ared ag
fr
in pa
L
hu
ck
an
m
id
k,
bl r co
ba
e
de
e be
sela
ity
30
l
˚C
).
(R
/6
R
H
0%
.
Barcode label
TIO
<
_
in IV O % k
IT T of
nta
90 to rs
S C < d ea s ). rs
N U ou
U coSEND d te (p on ,
or de H rs
iti ou
an bjec ng
ou rs
Ais bUagRMEICO ˚C co 72 H
si nd 5 H ou
˚C su es te 48
CThIS co ± e H
y da e 24 6
T E 40 be oc
or ˚C tim e
S < ill pr). ith or tim
O w nt ct 23 w tim e
M TO
at fa lo or
s at le ˚C at at e. al F lo or tim
P th th va l tic F lo or
O on s ui be if: read
ur F lo
m ce eq la lo
w ed
id
en l 4 5 F
vi g, n oc ve l
24 or de be in pr is 5a
de , e nt whe Le ve l 6
te
g: , w
r
co
se ou ke e Le ve l
da Le ve
ba ed flo
ba e m % ba al st
ur e
en re r ur e Le
ed e e tim re> 10 fo se oi st ur e
al op se fo M oi st ur
se is as or . is 33 k, M oi st
k, lo H bed
in g ph , -0 an M oi
e r- an in F R ng ar D bl M
ba
lif is po If bl ith % ki r C. S
T (if r
lf th va p. w 10 ba to et J- ea r ks
he r w, m <
_ m Y ea rs
S te ed iredicat d, EC 1 Y ee
1.
fte
A flody
nt
d
at
qu In no ire D > 1 W Hou
ou e 4 8
2. re
bo M re reity is qu/JE e
to es id 2b re C : tim e 16
a) S tim
ic is IP ed loor tim e
b) ev Humor e or
en F
D 2a king nc te F
lo or tim
a) op lo or
3. b) ba re da e F lo
If fe
al l 1 2 F
re tim ve l
4. se d l 2a
Le ve 3
ag an e Le ve l
B e ur e Le ve
at st ur e
D Le
oi st ur e
M oi st ur
M oi st
M oi
M
M
RA
OS
Humidity indicator
Barcode label
Do not eat.
Avoid metal contact.
Discard if circles overrun.
bag opening.
Please check the HIC immidiately after
bake units
examine units, if necessary 15%
If wet,
bake units
examine units, if necessary 10%
If wet,
change desiccant
parts still adequately dry. 5%
If wet,
MIL-I-8835
Humidity Indicator
Desiccant
AM
OSR
OHA00539
Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card according JEDEC-STD-033.
260 ± 5 mm 230 ± 5 mm 85 ± 5 mm
L B Q H 9 G
7:
Encapsulant Type / Lens Properties
1: focusing lens (=20°)
clear resin or white volume conversion
8: white volume conversion
9: clear resin
L: No lens (Lambertian)
Chip Technology:
1: TSN
3: standard InGaN
4: AlGaAs
6: standard InGalP
E: ThinGaN & package with 8 kV
ESD stability
G: NOTA, Powerflip, ThinGaN
Notes
The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of
lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this
data sheet fall into the class exempt group (exposure time 10000 s). Under real circumstances (for expo-
sure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the
eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light
sources have a high secondary exposure potential due to their blinding effect. When looking at bright light
sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irrita-
tion, annoyance, visual impairment, and even accidents, depending on the situation.
Subcomponents of this device contain, in addition to other substances, metal filled materials including silver.
Metal filled materials can be affected by environments that contain traces of aggressive substances. There-
fore, we recommend that customers minimize device exposure to aggressive substances during storage,
production, and use. Devices that showed visible discoloration when tested using the described tests above
did show no performance deviations within failure limits during the stated test duration. Respective failure
limits are described in the IEC60810.
Based on very short life cycle times in chip technology this component is subject to frequent adaption to the
latest chip technology.
For further application related information please visit www.osram-os.com/appnotes
Disclaimer
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may
contain dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version on our website.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest
sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of
transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we
shall have to invoice you for any costs incurred.
In case buyer – or customer supplied by buyer – considers using our components in product safety devices/
applications or medical devices/applications, buyer and/or customer has to inform our local sales partner
immediately and we and buyer and /or customer will analyze and coordinate the customer-specific request
between us and buyer and/or customer.
Glossary
1)
Brightness: Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of
±11 %.
2)
Reverse Operation: This product is intended to be operated applying a forward current within the
specified range. Applying any continuous reverse bias or forward bias below the voltage range of light
emission shall be avoided because it may cause migration which can change the electro-optical char-
acteristics or damage the LED.
3)
Wavelength: Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm.
4)
Forward Voltage: Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of
±0.1 V.
5)
Thermal Resistance: Rth max is based on statistic values (6σ).
6)
Thermal Resistance: RthJA results from mounting on PC board FR 4 (pad size ≥ 5 mm² per pad)
7)
Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic-
es, the typical data or calculated correlations of technical parameters can only reflect statistical figures.
These do not necessarily correspond to the actual parameters of each single product, which could dif-
fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.
because of technical improvements, these typ. data will be changed without any further notice.
8)
Characteristic curve: In the range where the line of the graph is broken, you must expect higher differ-
ences between single devices within one packing unit.
9)
Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and
dimensions are specified in mm.
10)
Tape and Reel: All dimensions and tolerances are specified acc. IEC 60286-3 and specified in mm.
Revision History
Version Date Change
Published by ams-OSRAM AG
Tobelbader Strasse 30, 8141 Premstaetten, Austria
Phone +43 3136 500-0
ams-osram.com
© All rights reserved
24 | Version 1.9 | 2022-06-02