Professional Documents
Culture Documents
Polim-H02sd
Polim-H02sd
Datasheet
Surge arrester
POLIM-H..SD
Application
• DC
• Outdoor and Indoor
Item2 - Surge Arrester
Technical Data
Metal oxide surge arrester without spark gaps. Direct moulded silicone housing, grey color.
Designed and tested according to IEC 61992-5
The thermal stability of the MO-surge arrester is proved in the operating duty test according to LD4 which gives an
energy input 10.5 kJ/kV (Uc DC).
Ambient air temperature -60 to +40 °C (for higher values contact manufacturer)
Altitude up to 1800 m (for higher values contact manufacturer)
Frequency DC
Weather ageing tested according to series A (1000 h salt fog)
Continuous
Rated
operating wave 1/ ... µs wave 8/20 µs wave 30/60 µs
voltage
voltage
kV (DC) kV (DC) 10 kA (pk) 20 kA (pk) 2 kA (pk) 5 kA (pk) 10 kA (pk) 20 kA (pk) 40 kA (pk) 500 A (pk) 1 kA (pk) 2 kA (pk)
1.0 1.25 2.62 2.81 2.20 2.30 2.40 2.62 2.93 2.03 2.09 2.15
1.5 1.88 3.93 4.22 3.29 3.45 3.60 3.93 4.40 3.04 3.13 3.23
2.0 2.50 5.24 5.62 4.39 4.60 4.80 5.24 5.86 4.06 4.17 4.30
2.5 3.13 6.65 7.14 5.57 5.85 6.10 6.65 7.45 5.15 5.30 5.46
3.0 3.75 7.85 8.43 6.58 6.90 7.20 7.85 8.79 6.08 6.25 6.45
4.2 5.25 10.90 11.70 9.13 9.58 10.00 10.90 12.20 8.44 8.68 8.95
4.7 5.88 12.21 13.11 10.23 10.73 11.20 12.21 13.67 9.46 9.73 10.03
ABB 2
Item2 - Surge Arrester
Mechanical loads:
Torque moment 50 Nm
Tensile strength 1000 N
Maximal bending moment 250 Nm
MPSL 2500 N
3 ABB
Item2 - Surge Arrester