Gate Valve
SPAN
‘SPANIKP/A00292-2008
‘SPAN/KPP/0000431-2010
Resilient Wedge:
FullFlow Clear bore in opening position ensure optimum flow through
the valve thus reducing the head loss.
No accumulation of debris under the wedge enabling the
valve to be fully closed.
Full Close
Design:
> The design allows replacement of the sealing system when the valve
under pressure and in fully open position
> Dust seal prevent ingress of foreign matter.
> Gunmetal Thrust Collar provides stem guidance and low friction bearing
on opening and closing torque.
> Superior Stem made from Stainless Steel 431829 promises more
operation cycle.
Standard
Nominal Size
Nominal Pressure
Drilling Flange
Protection
Working Temperature
BS 5163-1: 2004 / BS 5163: 1986
DN 50 - DN 400
PN 16
BS EN 1092-2, PN16 uATAN MALAYSIA
Fusion Bonded Epoxy (min 250um)
Maximum 70°C
Material Specification:
Soft Seal
Thrust Collar
(oc Reference Standard
1. | Cap Screw | High Tensile Steel, BS 10083-1, Gr 12.9
2 [Siem Gap Ductile ten BS EN 156, EN-GIS-S007 |
3._| Stem Stainless Steel, BS 970-1, 431829 |
4, | Dust Seal EPDM, BS EN 681-1, Type WA |
"5. | Cover Ductile ron, BS EN 1563, EN-GJS-50
Ductile Iron, BS EN 1563, EN-GJS-500-7
6. |
7.
8. | Bonnet
| 9. [Gasket
EPDM, BS EN 681-1, Type WA
10. | Wedge Nut Gunmetal, 8S 1400, L62
11, | Wedge Ductile Iron vulcanized with EPDM rubber
12. | Body Ductile Iron, BS EN 1563, EN-GJS-500-7
Dimension Spec
Ca
203 | 229 | 267
ication:
100 150 200 | 250 300 | 350 400
292 | 330 | 356 | 381 | 406
[300 | 360°| 385 | 510
615 | 690 | 790 | 690 | 1280