Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Signals – IDENTIFICATION AND TURE/FALSE – PRELIMS AND MIDTERMS COMPILED

QUESTION ANSWER
The DC amount in periodic signals is the False
same with its rms value
Periodic signals should have a period in False
multiple of pi
The electromagnetic waves transmitted False
by radio broadcasting network are
always random signals.
Time Scaling is not possible for impulse False
function.
All periodic signals are impulse True
function.
Time shift could make an even True
symmetric signal to odd symmetric
signal.
Some signals cannot be classified either True
power or energy signal.
Signal conveys information. True
An impulse function is an energy signal. True
All signals are time-varying ( time False
varying )
In sampling a periodic signal, which of 5000 samples in one cycle
the following would be best to avoid
signal loss
Which of the following is not a random Unmodulated carrier wave
signal
Examples of Random Signal Video, speech, modulating signal,
noise and Audio
Which of the following could not be Daily temperature
considered as the continuous time
signal?
Which of the following does not belong Step function
to the group?
Choices:
Trapezoidal pulse
3 cycle square wave
Step function
Sinc function
Half-wave sinusoidal pulse
Which signal operation result to Signal expansion
reduction of signal frequency
Which of the following would result if a The signal would be gone
signal is multiplied to an impulse
function?
Population growth can be classified as? Neither power, nor energy
Which of the following operation does Reflection and time shift
not change the energy of a signal?
At what time does the magnitude of 0.1, 0.001, 0.1, 0.5, infinite, 1 sec
step function is equal to 1
Which of the following is a result of Data transmission goes slow
increasing resolution in quantization of
signals?
Discrete time signals have negative True
indices
Logarithmic function in a system is non True
linear
Time Scaling makes the system time- True
invariant
Derivative is a linear operation. True
Signal loss occur in discrete time signal False
expansion
Convolution of any signal with an False
impulse function result to a Dirac
function
Systems that requires a memory are False
static systems
Non-causal system have outputs that True
depend on future inputs
Discrete time signals could be True
expressed as sum of shifted impulses.
A System is stable when a finite False
sequence input produces an infinite
sequence output
Classify the system y(n+3) + Time variant , causal and dynamic
ny(n+2_=x(n+1)
Which of the following systems can A series diode and resistor
classified as static system.
Which of the following does not “The system does not change with
describe linear systems time”
Which of the following is not true for “Differential equations are only
linear times invariant system. applicable without initial conditions”

PADAYON!

You might also like