Professional Documents
Culture Documents
P1TF85 - S5
SPECIFICATION
1. SCOPE
DISTRIBUTION APPROVED
EVENDALE
10A LYNN
P1TF85–S5
Model Value - The numerical value derived by interrogating the model that
quantifies the form and spatial relationships of the geometry composing a
design model or assembly of models to the precision (number of decimal
places) of the computer system.
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
3.1.1 Master Model. Unless otherwise specified on the master model data
sheet, the master model provides a complete definition of the part geometry.
2
GE PROPRIETARY INFORMATION:
Use or disclosure of data contained on this sheet is subject to restrictions on the cover or first page.
P1TF85–S5
*3.1.5 Conflict and Discrepancy Reporting. The master model and the
corresponding drawing are equal, i.e., there is no order-of-precedence rule
that can resolve a conflict or discrepancy. Any conflict or discrepancy
identified between product definition data defined by both the master model
and the corresponding drawing shall be reported to the Purchaser. All
products shipped to Purchaser shall meet the Product Definition Data
characteristic requirements..
4. NOTES
4.4 External to GE Aviation Data Users. All requests for master model
data shall be directed to the Purchaser’s appropriate Sourcing organization.
3
GE PROPRIETARY INFORMATION:
Use or disclosure of data contained on this sheet is subject to restrictions on the cover or first page.
P1TF85–S5
Equal Bilateral
5.25
Tolerancing
Threads Represented as
Cylinders:
4
GE PROPRIETARY INFORMATION:
Use or disclosure of data contained on this sheet is subject to restrictions on the cover or first page.
P1TF85–S5
Single Limit in
Conjunction with a Limit .505 MIN
Dimensions (1)
20.04 20.03
19.04 20.02 19.03
19.02
Single Limits (2) .65 MAX or .65 MIN .65
Casting Edge Radii as X UNLESS OTHERWISE
Specified in General SPECIFIED ALL EDGE RADII Feature omitted
Notes TO BE .06 ±.02
Shot Peening
-------- Feature omitted
Edge Breaks
Per spec on drawing or
Breaking Sharp Edges as delineated on the Feature omitted
part drawing
Delineated Weld Classes Include with parent
(See Applicable Weld -------- material modeling
Specifications).
(2) Exceptions may apply as specified in the Model Data Sheet notes.
5
GE PROPRIETARY INFORMATION:
Use or disclosure of data contained on this sheet is subject to restrictions on the cover or first page.
P1TF85–S5
6
GE PROPRIETARY INFORMATION:
Use or disclosure of data contained on this sheet is subject to restrictions on the cover or first page.
P1TF85–S5
7
GE PROPRIETARY INFORMATION:
Use or disclosure of data contained on this sheet is subject to restrictions on the cover or first page.
P1TF85–S5
REVISION HISTORY
8
GE PROPRIETARY INFORMATION:
Use or disclosure of data contained on this sheet is subject to restrictions on the cover or first page.