Professional Documents
Culture Documents
VM FRL Flyer
VM FRL Flyer
VM FRL Flyer
SOLUTIONS
Versa-Matic 2” Metallic Flap Valve
E2-F
Superior Solids Handling
Solids
Passage:
Flap valve design delivers
1.125” (28.6mm)
Flow Rate
Flexibility:
Adjustable up to
219 gpm (829 lpm)
Low Cost
of Ownership:
Gravity assistance from top
suction and bottom discharge
reduces clogs and pump damage
when pumping settling solids
Ease of
Maintenance:
Clamped construction
allows for quick
disassembly and
reassembly
VERSAMATIC.COM/E2-F
Versa-Matic Advantages
E2 - 2” Metallic Flap Valve
Clamped Construction
Ease of assembly and disassembly Extended MTBF
with proven reliability. Gravity assistance from the top
suction and bottom discharge
design reduce clogs and damage
Flap Flap Valve Technology from setting solids.
Check Valve Robust stainless steel and elastomer abrasion
* Wilden® is a registered trade name of the Technology
Wilden® Pump and Engineering Company,
resistant flap valve modules for superior
a Dover Resources Company. solids handling up to 1.125 (28.6mm).
D E L I V E R I N G Q U A L I T Y, I N T E R C H A
2 VERSAMATIC.COM
Accessories & Specifications
E2 - 2” Metallic Flap Valve E2-F
Accessories / Kits:
Protect Your Investment and Increase Uptime
Performance: Curves:
E2 - 2” Flap Valve Clamped Pump – Metallic Center Displacement Per Stroke, 0.63 Gal. (2.4 L)
320 10 140
ELASTOMERIC AND TPE FITTED - RUGGED 10 20
40 60 AIR CONSUMPTION IN SCFM
90 9 80
280 AIR PRESSURE IN PSI
120 100
Flow Rate 80 8
SCFM M3/HR
Adjustable to . . . . . . . . 0-219 gpm (829 lpm) 240 120
Discharge Head in PSI
70 10 17
7 100 20 34
Port Size 200 140 40 51
60 6 60 102
Suction . . . . . . . . . . . . . . . . . . . . . . . 2" NPT 80 80 136
Discharge . . . . . . . . . . . . . . . . . . . . . 2" NPT 50 160 5 100 170
120 204
Air Inlet . . . . . . . . . . . . . . . . . . . . . 1/2" NPT 40 4 60 140 240
120
Air Exhaust . . . . . . . . . . . . . . . . . . . 1" NPT
30 3 40
Suction Lift 80
Dry . . . . . . . . . . . . . . . . . . . . . . . 15' (4.47 m) 20 2
40 20
Wet . . . . . . . . . . . . . . . . . . . . . . 28' (8.53 m) 10 1
Max Solid Size (Diameter) 0 0 0 0
. . . . . . . . . . . . . . . . . . . . . 1 1/8" (28.6 mm) Meters Feet BAR 0 20 40 60 80 100 120 140 160 180 200 220 240
Max Noise Level . . . . . . . . . . . . 95 dB(A) Capacity in U.S. Gallons Per Minute
Shipping Weights
0 80 160 240 320 400 480 560 640 720 800 880
Aluminum . . . . . . . . . . . . . . 84 lbs (29.5 kg) Capacity in Liters Per Minute
NOTE: Performance based on the following: elastomeric fitted pump, flooded suction, water at
ambient conditions. The use of other materials and varying hydraulic conditions may result
in deviations in excess of 5%.
10.38
[263.53]
.44 3.25
[11.11] [82.55]
21.80
[553.63] 25.50 10.00 9.00
[647.64] [254.00] [228.60]
3.25
21.80 28.50 [82.55]
[553.63] [723.84]
25.50 10.00 9.00
[647.64] [254.00] [228.60]
1" NPT
11.76 AIR EXHAUST 2.00
[298.77] [50.80]
28.50
[723.84] 11.88
[301.63]
1" NPT
11.76 AIR EXHAUST 2.00
[298.77] .19 17.37
[4.78] [441.32] [50.80]
11.88
[301.63]
1.81 2" NPT / BSP TAPERED
[46.04] DISCHARGE PORT .19 17.37
[4.78] [441.32]
1.81
Dimensions in Inches [mm]
2" NPT / BSP TAPERED
[46.04] DISCHARGE PORT Tolerance:±1/8" [± 3mm]
A N G E A B L E P U M P I N G S O LU T I O N S
VERSAMATIC.COM 3
How it Works
AODD Pump Operation Basic Principle
Compressed air fills left inner Compressed air fills right inner
chamber, causing the opposing chamber, causing lower flap
diaphragm to create suction, valve to open and discharge
opening the upper flap valve, fluid. Simultaneously, the left
pulling in fluid at inlet. chamber is in “Suction” cycle.
Simultaneously, the left
1 2
chamber is in “Discharge” cycle.
Distributed By:
VERSA-MATIC®
Warren Rupp, Inc.
A Unit of IDEX Corporation
800 North Main Street
Mansfield, OH 44902 USA
Phone: 419.526.7296
Fax: 419.526.7289
versamatic.com
VME2Fbro-rev0914 ©Copyright 2014 Warren Rupp, Inc. All Rights Reserved.