Professional Documents
Culture Documents
Laio
Laio
Bracket
Anchor fastner
Nut bolt
Horizontal runner
Stone
Laio is a aluminium sub-frame system for stone dry fixing in rain-screen / ventilated
cladding. The stones are installed with continous kerfs on the top and bottom edges of the slab.
Laio cladding system is a mechanical system, and no adhesive is necessary for its installation.
The system works by securing and supporting stone slabs by means of horizontal runners to
vertical aluminium sub-frame that is bracketed to the supporting wall. The system is articulated
by means of relevant fastenings. The natural stone slabs are separated using vertical and
horizontal joints. The joints between the natural stone slabs must always be open allowing
expansion and contraction of stone slabs. This system can be fixed on brickwork, concrete or
metal structures, both in new and in renovation work.
Plan & Section
30 mm stone
EPDM Gasket
5mm Groove
Vertical Mullion
Bracket
Components
VERTICAL MULLION
BRACKET
HORIZONTAL RUNNER
-Anchor fasteners of specified make are drilled mechanically in the vertical walls.
Depending upon the type of back support, RCC / Brick fasteners can be used. For unusual
loading conditions chemical fasteners can be used.
-Brackets are used to hold the subsystem in line, level and plumb. These brackets are bolted
to the anchorage system and further hold the vertical supports.
-Vertical mullions support and hold cantilever transmission of loads from the substructure to
the supporting wall through brackets and anchors.
-Horizontal runners bolted to the vertical mullions and secure the natural stone slabs.
-EPDM gasket- To eliminate vibrations and act as a separator between aluminium and
stone.
Key features of this system
- 3-way anchorage system caters for building tolerance and movements.
- Faster more flexible and economical installation to meet modern fast track programs.
- Can incorporate vision areas and openings with a full range of ancillaries.
- Cavity between the stone and the wall can be adjusted by modifying the brackets keeping
the system intact.
- The system can be modified using ancillary profiles to suit varied project requirements.
OFFICE:
MARMO SOLUTIONS PVT. LTD.
SHOP NO. 47A, GROUND AND FIRST FLOOR, PARMAR COMPOUND NEAR LAXMI
NARAYAN TEMPLE, HIGHWAY ROAD, VILE PARLE, EAST MUMBAI -400099
ashish@marmosolutions.com
www.marmosolutions.com
+91 114058 6081 / +91 9555155080
Laio system is an intellectual property of Aum Artemec LLP protected under Indian
Patent Act 1970. Via patent no. 394863.
OFFICE:
1205, THE CHAMBERS, ADJOINING W.E.H. METRO STATION, ANDHERI
EAST, MUMBAI- 400069.
FACTORY:
T4/T5, QURESHI COMPOUND, CHINCHOTI NAKA, MUMBAI-AHMEDABAD
HIGHWAY, NAIGOAN EAST, VASAI 401208.
www.aumartemec.com/systems
info@aumartemec.com
+91 9833533000