Professional Documents
Culture Documents
5 - Fatigue Analysis
5 - Fatigue Analysis
The maximum deformation is 0.12mm after the 1000N load applied to the top surface
Analysis type strain Life:
Life :
Fatigue sensitivity
Mean stress theory SWT
Damage :
Values of “0” correspond to uniaxial stress, “1” indicates biaxial state of stress, and “-1”
relates to pure shear state. This helps users to determine what the stress state is in different
regions since the fatigue tests are done assuming a particular state of stress. For this example,
the critical fillet regions report values near zero (green), so the fatigue assumptions may be