Professional Documents
Culture Documents
PLR 150 CSR 0002 CN Pi Steelsupport
PLR 150 CSR 0002 CN Pi Steelsupport
0 14-03-2023
ORIGINAL ISSUE FA
14-03-2023 14-03-2023
ESTABLISHED CHECKED APPROVED
REV. MODIFICATION STATUS
DATE DATE DATE
OWNER
PROJECT :
UPRATING PENGHANTAR
GI 150KV BRINGIN BAY MOJOSONGO 1&2, GI 150KV MOJOSONGO BAY BRINGIN 1&2,
GI 150KV MASARAN BAY PALUR 1&2, GI 150KV PALUR BAY MASARAN 1&2
CONTRACTOR :
1 ) Simplified drawing
2 ) Characteristics of apparatus support
3 ) Characteristics of the apparatus
4 ) Characteristics of the connections
5 ) Loads applied on the top of the support:
2
1.) TECHNICAL DATA APPLICABLE FOR ALL STRUCTURES
1.1) INTRODUCTION
1 Dead Weight
2 Additional vertical load of 1kN (weight of man with tools)
3 Normal wind load along x direction ( 90°to connections)
4 Normal wind load along y direction (// to connections)
5 high wind load along x direction (90°to connections)
6 High wind load along y direction (// to connections)
7 Earthquake along X+ and Z- direction
8 Earthquake along Y+ and Z- direction
9 Earthquake along X+ and Z+ direction
10 Earthquake along Y+ and Z+ direction
11 Connection forces due to self weight and minimum Temperature
(Basic state)
12 Connection forces due to self weight + normal wind // x and short-circuit effect
(State 1)
13 Connection forces due to self weight + extreme wind // x and short-circuit effect
(State 2)
14 Connection forces due to self weight + short-circuit effect
(State 3)
15 Connection forces due to self weight + normal wind // y and short-circuit effect
(State 4 - When the connections are //x or vertical concerning H.V. apparatus)
16 Connection forces due to self weight + extreme wind // y and short-circuit effect
(State 5 - When the connections are //x or vertical concerning H.V. apparatus)
3
1.3) LOAD COMBINAISONS
Load
Comb. Elementary load cases - For Steel structure
Code
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
DW DW DW DW DW DW
SC SC SC SC SC
NWx HWx NWy HWy
DW Avl HWx HWy NWx NWy EyEz- ExEz- EyEz+ ExEz+ BS S1 S2 S3 S4 S5
101 1.5 1.5 1.5
102 1.5 1.5 1.5
103 1.5 1.5 1.5
104 1.5 1.5 1.5
105 1.5 1.5 1.5
106 1.5 1.5 1.5
107 1.5 1.5 1.5
108 1.5 1.5 1.5
109 1.5 1.5 1.5
DW = Dead weight EyEz- = Earthquake along Y+ and Z- direction
Avl = Additional vertical load of 1KN ExEz- = Earthquake along X+ and Z- direction
NWx = Normal Wind along x direction EyEz+ = Earthquake along Y+ and Z+ direction
NWy = Normal Wind along y direction ExEz+ = Earthquake along X+ and Z+ direction
HWx = High Wind along x direction SC = Short circuit effect
HWy = High Wind along y direction
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
DW Avl HWx HWy NWx NWy EyEz- ExEz- EyEz+ ExEz+ BS S1 S2 S3 S4 S5
110 1.5 1.5 1.5
111 1.5 1.5 1.5
112 1.5 1.5 1.5
113 1.5 1.5 1.5
4
I.4) CLIMATIC HYPOTHESES
- Basic pressure of normal wind: 38.30 daN/m²
- Basic pressure of extreme wind: 68.00 daN/m²
5
150KV POST INSULATOR
3.1) Simplified drawing
Side B
Side A Side C
Element 2
H1 Ht H
+G
Element 1
Hg
Hs
z
My
Mx
x y (Conductor axis)
O
O
3.2) Characteristics of apparatus support
If lattice type :
j1 j2
//y (Wind x) //x (Wind y)
Z Z
Y X
3.3) Characteristics of the apparatus (one phase)
Element 1 => Cylindrical area Total weight of the apparatus : 105,0 daN
Element 2 => Cylindrical area Total weight of the frost on the apparatus: 0,0 daN
Additionnal element:
Control box Weight
Wind X 0,00 m² -Fz 0,0 daN
Wind Y 0,00 m²
Frost weight
Area center (for wind) : Control box -Fz 0,0 daN
Position along x / O 0,000 m
Position along y / O 0,000 m
Position along z / O 0,000 m
3.4) Climatic hypotheses
- Drag coefficient of the exposed area of the support: 1,600 88,34 61,34
- Drag coefficient of the protected area of the support: 0,598 33,01 22,92
y
(Direction of conductors)
2 3
x