Professional Documents
Culture Documents
SBVL Assignment1
SBVL Assignment1
HỌC VIỆN HÀNG KHÔNG VIỆT NAM Học phần: Sức bền vật liệu
KHOA KỸ THUẬT HÀNG KHÔNG Mã học phần: 0108000619
Problem 1.
Compute the stress in a round bar subjected to a direct tensile force of 3200 N if the diameter of
the bar is 10 mm.
Problem 2.
Problem 3.
A link in a mechanism for an automated packaging machine is subjected to a tensile force of 860
lb. If the link is square, 0.40 in. on a side, compute the stress in the link.
Problem 4.
An air-filled rubber ball has a diameter of 6 in. If the air pressure within the ball is increased until
the diameter becomes 7 in., determine the average normal strain in the rubber.
Problem 5.
The rectangular plate is subjected to the deformation shown by the dashed line in Figure 1.
Determine the average shear strain γxy in the plate.
Figure 1
Problem 6.
The structure in Figure 2 subjected to tensile loads. Determine the maximum average shear stress
developed in each 3/4-in.-diameter bolt.
Figure 2
Problem 7.
In a pair of pliers, the hinge pin is subjected to direct shear, as indicated in Figure 3. If the pin has a
diameter of 3.0 mm and the force exerted at the handle, Fh is 55 N, compute the stress in the pin.
Figure 3
Problem 8.
Figure 4
A centrifuge is used to separate liquids according to their densities using centrifugal force. Figure 4
illustrates one arm of a centrifuge having a bucket at its end to hold the liquid. In operation, the
bucket and the liquid have a mass of 0.40 kg. The centrifugal force has the magnitude in newtons
of F = 0.01097 ⋅ m ⋅ R ⋅ n 2