Professional Documents
Culture Documents
Nse4 Exam p1
Nse4 Exam p1
What is the limitation of using a URL list and application control on the same firewall
policy, in NGFW policy-based mode?
A. It limits the scanning of application traffic to the browser-based technology category only.
B. It limits the scanning of application traffic to the DNS protocol only.
C. It limits the scanning of application traffic to use parent signatures only.
D. It limits the scanning of application traffic to the application category only.
Answer: A
Q2
Refer to the exhibits.
The exhibits show the firewall policies and the objects used in the firewall policies.
The administrator is using the Policy Lookup feature and has entered the search criteria shown
Which policy will be highlighted, based on the input criteria?
A. Policy with ID 4.
B. Policy with ID 5.
C. Policies with ID 2 and 3.
D. Policy with ID 4.
Answer: A
Q3
FortiGate is operating in NAT mode and is configured with two virtual LAN (VLAN)
subinterfaces added to the same physical interface.
In this scenario, what are two requirements for the VLAN ID? (Choose two.)
A. The two VLAN subinterfaces can have the same VLAN ID, only if they have IP addresses in the same
subnet.
B. The two VLAN subinterfaces can have the same VLAN ID, only if they belong to different VDOMs.
C. The two VLAN subinterfaces must have different VLAN IDs.
D. The two VLAN subinterfaces can have the same VLAN ID, only if they have IP addresses in different
subnets.
Answer: CD
Q4
Q5
A. Strict RPF allows packets back to sources with all active routes.
B. Strict RPF checks the best route back to the source using the incoming interface.
C. Strict RPF checks only for the existence of at least one active route back to the source using the
incoming interface.
D. Strict RPF check is run on the first sent and reply packet of any new session.
Answer: C
Q6
Refer to the exhibits.
The exhibits show the SSL and authentication policy (Exhibit A) and the security policy (Exhibit
B) for Facebook.
Users are given access to the Facebook web application. They can play video content hosted
on Facebook, but they are unable to leave reactions on videos or other types of posts.
Which part of the policy configuration must you change to resolve the issue?
Q7
Refer to the exhibits.
An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the
security fabric. After synchronization, this object is not available on the downstream FortiGate
(ISFW).
What must the administrator do to synchronize the address object?
Answer: D
Q8
Refer to the exhibits.
Exhibit A shows system performance output. Exhibit B shows a FortiGate configured with the
default configuration of high memory usage thresholds.
Based on the system performance output, which two results are correct? (Choose two.)
Q9
Refer to the exhibit showing a debug flow output.
What two conclusions can you make from the debug flow output? (Choose two.)
Q10
An administrator is configuring an IPsec VPN between site A and site B. The Remote
Gateway setting in both sites has been configured as Static IP Address. For site A, the
local quick mode selector is 192.168.1.0/24 and the remote quick mode selector is
192.168.2.0/24.
Which subnet must the administrator configure for the local quick mode selector for site
B?
A. 192.168.2.0/24
B. 192.168.0.0/8
C. 192.168.1.0/24
D. 192.168.3.0/24
Answer: A
Q11
Which two settings are required for SSL VPN to function between two FortiGate
devices? (Choose two.)
Q12
Q13
Refer to the exhibits.
The exhibits contain a network diagram, and virtual IP, IP pool, and firewall policies configuration
information.
The WAN (port1) interface has the IP address 10.200.1.1/24.
The LAN (port3) interface has the IP address 10.0.1.254/24.
The first firewall policy has NAT enabled using IP pool.
The second firewall policy is configured with a VIP as the destination address.
Which IP address will be used to source NAT (SNAT) the internet traffic coming from a
workstation with the IP address 10.0.1.10?
A. 10.200.1.1
B. 10.0.1.254
C. 10.200.1.10
D. 10.200.1.100
Answer: D
Q14
Refer to the exhibit.
The exhibit shows a diagram of a FortiGate device connected to the network, the firewall policy
and VIP configuration on the FortiGate device, and the routing table on the ISP router.
When the administrator tries to access the web server public address (203.0.113.2) from the
internet, the connection times out. At the same time, the administrator runs a sniffer on
FortiGate to capture incoming web traffic to the server and does not see any output.
Based on the information shown in the exhibit, what configuration change must the
administrator make to fix the connectivity issue?
Q15
Which two statements are true about the FGCP protocol? (Choose two.)
Q16
A. Configure a higher distance on the static route for the primary tunnel, and a lower distance on the
static route for the secondary tunnel.
B. Configure a lower distance on the static route for the primary tunnel, and a higher distance on the
static route for the secondary tunnel.
C. Enable Auto-negotiate and Autokey Keep Alive on the phase 2 configuration of both tunnels.
D. Enable Dead Peer Detection.
Answer: BD
Q17
Q18
A. www.example.com
B. www.example.com/index.html
C. www.example.com:443
D. example.com
Answer: AD
Q19
Refer to exhibit.
An administrator configured the web filtering profile shown in the exhibit to block access to all
social networking sites except Twitter. However, when users try to access twitter.com, they are
redirected to a FortiGuard web filtering block page.
Based on the exhibit, which configuration change can the administrator make to allow
Twitter while blocking all other social networking sites?
A. On the FortiGuard Category Based Filter configuration, set Action to Warning for Social Networking.
B. On the Static URL Filter configuration, set Type to Simple.
C. On the Static URL Filter configuration, set Action to Exempt.
D. On the Static URL Filter configuration, set Action to Monitor.
Answer: C
Q20
A. Flow-based inspection uses a hybrid of the scanning modes available in proxy-based inspection.
B. If a virus is detected, the last packet is delivered to the client.
C. The IPS engine handles the process as a standalone.
D. FortiGate buffers the whole file but transmits to the client at the same time.
E. Flow-based inspection optimizes performance compared to proxy-based inspection.
Answer: ADE
Q21
Which three criteria can FortiGate use to look for a matching firewall policy to process
traffic? (Choose three.)
Q22
Q23
A. Pre-shared key
B. Dialup user
C. Dynamic DNS
D. Static IP address
Answer: B
Q24
Which timeout setting can be responsible for deleting SSL VPN associated sessions?
Q25
Which statement is correct regarding the use of application control for inspecting web
applications?
A. Application control can identify child and parent applications, and perform different actions on them.
B. Application control signatures are organized in a nonhierarchical structure.
C. Application control does not require SSL inspection to identify web applications.
D. Application control does not display a replacement message for a blocked web application.
Answer: A
Q26
A network administrator enabled antivirus and selected an SSL inspection profile on a firewall
policy. When downloading an EICAR test file through HTTP, FortiGate detects the virus and
blocks the file. When downloading the same file through HTTPS, FortiGate does not detect the
virus and does not block the file, allowing it to be downloaded.
The administrator confirms that the traffic matches the configured firewall policy.
What are two reasons for the failed virus detection by FortiGate? (Choose two.)
Q27
Refer to the exhibits.
Exhibit A shows a topology for a FortiGate HA cluster that performs proxy-based inspection on traffic.
Exhibit B shows the HA configuration and the partial output of the get system ha status command.
Based on the exhibits, which two statements about the traffic passing through the cluster are
true? (Choose two.)
A. For non-load balanced connections, packets forwarded by the cluster to the server contain the virtual
MAC address of port2 as source.
B. The traffic sourced from the client and destined to the server is sent to FGT-1.
C. The cluster can load balance ICMP connections to the secondary.
D. For load balanced connections, the primary encapsulates TCP SYN packets before forwarding them to
the secondary.
Answer: AD
Q28
Which two attributes are required on a certificate so it can be used as a CA certificate on SSL
inspection? (Choose two.)
Answer: AB
Q29
Refer to the exhibit.
An administrator is running a sniffer command as shown in the exhibit.
Which three pieces of information are included in the sniffer output? (Choose three.)
A. Packet payload
B. Application header
C. IP header
D. Ethernet header
E. Interface name
Answer: ACE
Q30
By default, FortiGate is configured to use HTTPS when performing live web filtering with
FortiGuard servers.
Which CLI command causes FortiGate to use an unreliable protocol to communicate with
FortiGuard servers for live web filtering?
Answer: D
Q31
An administrator wants to configure dead peer detection (DPD) on IPsec VPN for detecting dead
tunnels. The requirement is that FortiGate sends DPD probes only when no traffic is observed in
the tunnel.
Which DPD mode on FortiGate will meet this requirement?
A. On Demand
B. On Idle
C. Disabled
D. Enabled
Answer: B
Q32
An administrator does not want to report the login events of service accounts to FortiGate.
Which setting on the collector agent is required to achieve this?
Answer: A
Q33
Refer to the exhibit.
Based on the ZTNA tag, the security posture of the remote endpoint has changed.
What will happen to endpoint active ZTNA sessions?
Answer: C
A. FortiGate allocates port blocks per user, based on the configured range of internal IP addresses.
B. FortiGate allocates port blocks on a first-come, first-served basis.
C. FortiGate generates a system event log for every port block allocation made per user.
D. FortiGate allocates 128 port blocks per user.
Answer: BC
Q35
Which two statements about the Security Fabric rating are true? (Choose two.)
Answer: CD
Q36
An administrator wants to configure timeouts for users. Regardless of the user's behavior, the
timer should start as soon as the user authenticates and expire after the configured value.
Which timeout option should the administrator configure on FortiGate?
A. new-session
B. idle-timeout
C. hard-timeout
D. soft-timeout
E. auth-on-demand
Answer: C
Q37
Which two statements explain antivirus scanning modes? (Choose two.)
A. In flow-based inspection mode, files bigger than the buffer size are scanned.
B. In proxy-based inspection mode, files bigger than the buffer size are scanned.
C. In flow-based inspection mode, FortiGate buffers the file, but also simultaneously transmits it to the
client.
D. In proxy-based inspection mode, antivirus scanning buffers the whole file for scanning, before
sending it to the client.
Answer: CD
Q38
Refer to the exhibits.
The exhibits show a network diagram and firewall configurations.
An administrator created a Deny policy with default settings to deny Webserver access for Remote-User2.
Remote-User1 must be able to access the Webserver. Remote-User2 must not be able to access the
Webserver.
In this scenario, which two changes can the administrator make to deny Webserver access for
Remote-User2? (Choose two.)
Answer: BC
Q39
Refer to the exhibit.
Examine the intrusion prevention system (IPS) diagnostic command shown in the exhibit.
If option 5 is used with the IPS diagnostic command and the outcome is a decrease in the CPU
usage, what is the correct conclusion?
Answer: B
Q40
Which two protocols are used to enable administrator access of a FortiGate device? (Choose
two.)
A. FTM
B. SSH
C. HTTPS
D. FortiTelemetry
Answer: BC
Q41
Which statement about video filtering on FortiGate is true?
A. Video filtering FortiGuard categories are based on web filter FortiGuard categories.
B. It does not require a separate FortiGuard license.
C. Full SSL inspection is not required.
D. It is available only on a proxy-based firewall policy.
Answer: D
Q42
Which statement correctly describes NetAPI polling mode for the FSSO collector agent?
Answer: B
Q43
What are two features of FortiGate FSSO agentless polling mode? (Choose two.)
A. FortiGate uses the SMB protocol to read the event viewer logs from the DCs.
B. FortiGate uses the AD server as the collector agent.
C. FortiGate directs the collector agent to use a remote LDAP server.
D. FortiGate does not support workstation check.
Answer: AD
Q44
Which engine handles application control traffic on the next-generation firewall (NGFW)
FortiGate?
Answer: A
Q45
Refer to the exhibit.
Based on the routing database shown in the exhibit, which two conclusions can you make about
the routes? (Choose two.)
Answer: BC
Q46
Refer to the exhibits.
The exhibits show a firewall policy (Exhibit A) and an antivirus profile (Exhibit B).
Why is the user unable to receive a block replacement message when downloading an infected
file for the first time?
Answer: C
Q47
Which two configuration settings are synchronized when FortiGate devices are in an active-
active HA cluster? (Choose two.)
Q48
On FortiGate, which type of logs record information about traffic directly to and from the
FortiGate management IP addresses?
Answer: B
Q49
Refer to the exhibit.
Review the intrusion prevention system (IPS) profile signature settings shown in the exhibit.
What do you conclude when adding the FTP.Login.Failed signature to the IPS sensor profile?
Answer: C
Q50
An administrator configures outgoing interface any in a firewall policy.
What is the result of the policy list view?
A. Search option is disabled.
B. Policy lookup is disabled.
C. By Sequence view is disabled.
D. Interface Pair view is disabled.
Answer: D
Q51
Which statement describes a characteristic of automation stitches?
Answer: C
Q52
Answer: C
Q53
Refer to the exhibit.
The Root and To_Internet VDOMs are configured in NAT mode. The DMZ and Local VDOMs are
configured in transparent mode.
The Root VDOM is the management VDOM. The To_Internet VDOM allows LAN users to access the
internet. The To_Internet VDOM is the only VDOM with internet access and is directly connected to the
ISP modem.
What can you conclude about this configuration?
A. Inter-VDOM links are not required between the Root and To_Internet VDOMs because the Root
VDOM is used only as a management VDOM.
B. A default static route is not required on the To_Internet VDOM to allow LAN users to access the
internet.
C. Inter-VDOM links are required to allow traffic between the Local and DMZ VDOMs.
D. Inter-VDOM links are required to allow traffic between the Local and Root VDOMs.
Answer: D
Q54
Refer to the exhibit.
The exhibit shows the output of a diagnose command.
Answer: D
Q55
Refer to the exhibit.
An administrator added a configuration for a new RADIUS server. While configuring, the administrator
selected the Include in every user group option.
What is the impact of using the Include in every user group option in a RADIUS configuration?
A. This option places all users into every RADIUS user group, including groups that are used for the LDAP
server on FortiGate.
B. This option places the RADIUS server, and all users who can authenticate against that server, into
every FortiGate user group.
C. This option places all FortiGate users and groups required to authenticate into the RADIUS server,
which, in this case, is FortiAuthenticator.
D. This option places the RADIUS server, and all users who can authenticate against that server, into
every RADIUS group.
Answer: B
Q56
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The
administrator has determined that phase 1 status is up, but phase 2 fails to come up.
Based on the phase 2 configuration shown in the exhibit, which configuration change will bring
phase 2 up?
Answer: B
Q57
An administrator configures FortiGuard servers as DNS servers on FortiGate using default
settings.
What is true about the DNS connection to a FortiGuard server?
Answer: D
Q58
Refer to the exhibit.
The exhibit shows the IPS sensor configuration.
If traffic matches this IPS sensor, which two actions is the sensor expected to take? (Choose
two.)
A. The sensor will gather a packet log for all matched traffic.
B. The sensor will reset all connections that match these signatures.
C. The sensor will block all attacks aimed at Windows servers.
D. The sensor will allow attackers matching the Microsoft Windows.iSCSI.Target.DoS signature.
Answer: CD
Q59
Which two types of traffic are managed only by the management VDOM? (Choose two.)
A. DNS
B. FortiGuard web filter queries
C. PKi
D. Traffic shaping
Answer: AB
Q60
Refer to the exhibits.
The SSL VPN connection fails when a user attempts to connect to it.
What should the user do to successfully connect to the SSL VPN?
Answer: A
Q61
Refer to the exhibits.
Exhibit A shows a network diagram. Exhibit B shows the firewall policy configuration and a VIP object
configuration.
Answer: C
Q62
Which three methods are used by the collector agent for AD polling? (Choose three.)
A. FortiGate polling
B. FSSO REST API
C. WMI
D. NetAPI
E. WinSecLog
Answer: CDE
Q63
Answer: BD
Q64
Which two statements describe how the RPF check is used? (Choose two.)
A. The RPF check is a mechanism that protects FortiGate and the network from IP spoofing attacks.
B. The RPF check is run on the first sent and reply packet of any new session.
C. The RPF check is run on the first sent packet of any new session.
D. The RPF check is run on the first reply packet of any new session.
Answer: AC
Q65
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The
administrator has determined that phase 1 failed to come up. The administrator has also re-entered the
pre-shared key on both FortiGate devices to make sure they match.
Based on the phase 1 configuration and the diagram shown in the exhibit, which two
configuration changes can the administrator make to bring phase 1 up? (Choose two.)
Answer: BD
Q66
An administrator needs to increase network bandwidth and provide redundancy.
Which interface type must the administrator select to bind multiple FortiGate interfaces?
A. Redundant interface
B. Software switch interface
C. VLAN interface
D. Aggregate interface
Answer: D
Q67
FortiGate is integrated with FortiAnalyzer and FortiManager.
When a firewall policy is created, which attribute is added to the policy to improve functionality
and to support recording logs to FortiAnalyzer or FortiManager?
A. Policy ID
B. Log ID
C. Sequence ID
D. Universally Unique Identifier
Answer: D
Q68
Refer to the exhibit, which contains a static route configuration.
Which CLI command must the administrator use to view the route?
Answer: B
Q69
An organization requires remote users to send external application data running on their PCs and
access FTP resources through an SSL/TLS connection.
Which FortiGate configuration can achieve this goal?
Answer: B
Q70
The IPS engine is used by which three security features? (Choose three.)
Answer: ABC
Q71
You have enabled logging on a FortiGate device for event logs and all security logs, and you
have set up logging to use the FortiGate local disk.
A. No new log is recorded after the warning is issued when log disk use reaches the threshold of 95%.
B. No new log is recorded until you manually clear logs from the local disk.
C. Logs are overwritten and the first warning is issued when log disk use reaches the threshold of 75%.
D. Logs are overwritten and the only warning is issued when log disk use reaches the threshold of 95%.
Answer: C
Q72
Which two features of IPsec IKEv1 authentication are supported by FortiGate? (Choose two.)
A. Extended authentication (XAuth) for faster authentication because fewer packets are exchanged
B. Extended authentication (XAuth) to request the remote peer to provide a username and password
C. No certificate is required on the remote peer when you set the certificate signature as the
authentication method
D. Pre-shared key and certificate signature as authentication methods
Answer: BD
Q73
If Internet Service is already selected as Destination in a firewall policy, which other
configuration object can be selected for the Destination field of a firewall policy?
A. IP address
B. No other object can be added
C. FQDN address
D. User or User Group
Answer: B
Q74
Which statement is correct regarding the security fabric?
Answer: B
Q74
Based on the output, which two facts does the administrator know about the FortiGuard
connection? (Choose two.)
Q76
Refer to the exhibit.
Based on the administrator profile settings, what permissions must the administrator set to run
the diagnose firewall auth list CLI command on FortiGate?
Answer: A
Q77
Refer to the exhibits.
Exhibit A shows the application sensor configuration. Exhibit B shows the Excessive-Bandwidth and
Apple filter details.
Based on the configuration, what will happen to Apple FaceTime if there are only a few calls
originating or incoming?
Answer: B
Q78
Refer to the exhibit.
Q79
What is a reason for triggering IPS fail open?
A. The IPS socket buffer is full and the IPS engine cannot process additional packets.
B. The IPS engine cannot decode a packet.
C. The IPS engine is upgraded.
D. The administrator enabled NTurbo acceleration.
Answer: A
Q80
Which statement about the deployment of the Security Fabric in a multi-VDOM environment is
true?
A. VDOMs without ports with connected devices are not displayed in the topology.
B. Downstream devices can connect to the upstream device from any of their VDOMs.
C. Security rating reports can be run individually for each configured VDOM.
D. Each VDOM in the environment can be part of a different Security Fabric.
Answer: A
Q81
What is the effect of enabling auto-negotiate on the phase 2 configuration of an IPsec tunnel?
A. FortiGate automatically negotiates different encryption and authentication algorithms with the
remote peer.
B. FortiGate automatically brings up the IPsec tunnel and keeps it up, regardless of activity on the IPsec
tunnel.
C. FortiGate automatically negotiates different local and remote addresses with the remote peer.
D. FortiGate automatically negotiates a new security association after the existing security association
expires.
Answer: B
Q82
A network administrator has enabled full SSL inspection and web filtering on FortiGate. When
visiting any HTTPS websites, the browser reports certificate warning errors. When visiting
HTTP websites, the browser does not report errors.
Answer: D
Q83
An employee needs to connect to the office through a high-latency internet connection.
Which SSL VPN setting should the administrator adjust to prevent SSL VPN negotiation failure?
A. idle-timeout
B. login-timeout
C. udp-idle-timer
D. session-ttl
Answer: B
Q84
The HTTP inspection process in web filtering follows a specific order when multiple features are
enabled in the web filter profile.
Which order must FortiGate use when the web filter profile has features such as safe search
enabled?
Answer: B
Q85
Refer to the exhibit.
The exhibit shows the FortiGuard Category Based Filter section of a corporate web filter profile.
An administrator must block access to download.com, which belongs to the Freeware and Software
Downloads category. The administrator must also allow other websites in the same category.
What are two solutions for satisfying the requirement? (Choose two.)
A. Configure a separate firewall policy with action Deny and an FQDN address object for
*.download.com as destination address.
B. Configure a web override rating for download.com and select Malicious Websites as the subcategory.
C. Set the Freeware and Software Downloads category Action to Warning.
D. Configure a static URL filter entry for download.com with Type and Action set to Wildcard and Block,
respectively.
Answer: AD
Q86
Refer to the exhibits.
Exhibit A shows a network diagram. Exhibit B shows the firewall policy configuration and a VIP object
configuration.
A. 10.200.1.10
B. 10.0.1.254
C. 10.200.1.1
D. 10.200.3.1
Answer: C
Q87
Refer to the exhibit to view the firewall policy.
Why would the firewall policy not block a well-known virus, for example eicar?
A. Web filter is not enabled on the firewall policy to complement the antivirus profile.
B. The firewall policy is not configured in proxy-based inspection mode.
C. The firewall policy does not apply deep content inspection.
D. The action on the firewall policy is not set to deny.
Answer: C
Q88
What are two characteristics of FortiGate HA cluster virtual IP addresses? (Choose two.)
Answer: A
*** a change in heartbeat IP address may happen when device joins or leave the cluster.
*** 169.254.0.1 highest S/N
**heartbeat ip address distinguish the cluster members
Q89
An administrator wants to simplify remote access without asking users to provide user
credentials.
Answer: B
Q90
What are two features of collector agent advanced mode? (Choose two.)
A. In advanced mode, FortiGate can be configured as an LDAP client and group filters can be configured
on FortiGate.
B. In advanced mode, security profiles can be applied only to user groups, not individual users.
C. Advanced mode uses the Windows convention—NetBios: Domain\Username.
D. Advanced mode supports nested or inherited groups.
Answer: AD
Q91
Which three CLI commands can you use to troubleshoot Layer 3 issues, if the issue is in neither
the physical layer nor the link layer? (Choose three.)
Answer: ABD
Q92
What are two scanning techniques supported by FortiGate? (Choose two.)
Answer: AB
Q93
Refer to the exhibit.
The exhibit shows a diagram of a FortiGate device connected to the network and the firewall policy and
IP pool configuration on the FortiGate device.
Two PCs, PC1 and PC2, are connected behind FortiGate and can access the internet successfully.
However, when the administrator adds a third PC to the network (PC3), the PC cannot connect to the
internet.
Based on the information shown in the exhibit, which three configuration changes should the
administrator make to fix the connectivity issue for PC3? (Choose three.)
Answer: ADE
Q94
Refer to the exhibit.
Based on the raw log, what can you conclude from the output? (Choose two.)
Answer: BC
Q95
Which two settings can be separately configured per VDOM on a FortiGate device? (Choose
two.)
A. System time
B. FortiGuard update servers
C. Operating mode
D. NGFW mode
Answer: CD
Q96
Which inspection mode does FortiGate use if it is configured as a policy-based next-generation
firewall (NGFW)?
A. Flow-based inspection
B. Full content inspection
C. Certificate inspection
D. Proxy-based inspection
Answer: A
Q97
What are two features of the NGFW policy-based mode? (Choose two.)
A. NGFW policy-based mode supports creating applications and web filtering categories directly in a
firewall policy.
B. NGFW policy-based mode does not require the use of central source NAT policy.
C. NGFW policy-based mode policies support only flow inspection.
D. NGFW policy-based mode can only be applied globally and not on individual VDOMs.
Answer: AC
Q98
What is the primary FortiGate election process when the HA override setting is disabled?
A. Connected monitored ports > Priority > HA uptime > FortiGate serial number
B. Connected monitored ports > System uptime > Priority > FortiGate serial number
C. Connected monitored ports > Priority > System uptime > FortiGate serial number
D. Connected monitored ports > HA uptime > Priority > FortiGate serial number
Answer: D
Q99
Which three pieces of information does FortiGate use to identify the hostname of the SSL server
when SSL certificate inspection is enabled? (Choose three.)
Answer: BCD
Q100
How can you disable RPF checking?
Answer: D
Q101
An administrator needs to configure VPN user access for multiple sites using the same soft
FortiToken. Each site has a FortiGate VPN gateway.
A. The administrator must register the same FortiToken on more than one FortiGate device.
B. The administrator must use the user self-registration server.
C. The administrator must use a FortiAuthenticator device.
D. The administrator must use a third-party RADIUS OTP server.
Answer: C
Q102
Refer to the exhibits.
Exhibit A shows a network diagram. Exhibit B shows the central SNAT policy and IP pool configuration.
A firewall policy is configured to allow all destinations from LAN (port3) to WAN (port1).
Central NAT is enabled, so NAT settings from matching central SNAT policies will be applied.
Which IP address will be used to source NAT (SNAT) the traffic, if the user on Local-Client
(10.0.1.10) pings the IP address of Remote-FortiGate (10.200.3.1)?
A. 10.200.1.99
B. 10.200.1.1
C. 10.200.1.49
D. 10.200.1.149
Answer: A
Q103
Refer to the exhibits.
The exhibits contain a network interface configuration, firewall policies, and a CLI console configuration.
How will the FortiGate device handle user authentication for traffic that arrives on the LAN
interface?
A. All users will be prompted for authentication; users from the HR group can authenticate successfully
with the correct credentials.
B. If there is a fall-through policy in place, users will not be prompted for authentication.
C. All users will be prompted for authentication; users from the sales group can authenticate
successfully with the correct credentials.
D. Authentication is enforced only at a policy level; all users will be prompted for authentication.
Answer: A
Q104
Refer to the exhibit.
In the network shown in the exhibit, the web client cannot connect to the HTTP web server. The
administrator runs the FortiGate built-in sniffer and gets the output shown in the exhibit.
Answer: A