Professional Documents
Culture Documents
Circuito Integrado LTV3223
Circuito Integrado LTV3223
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
1. DESCRIPTION
Solid State Relays (SSR) are integration of an AlGaAs Light Emitting Diode, a Phototriac Detector and a main
power Triac. These devices are ideally suited for controlling high voltage AC loads with solid state reliability
while providing 5 KV isolation (Viso(rms)) between input to output.
1.1 Features
8 pin DIP package
High repetitive peak off-state voltage VDRM : Min. 600 V
Isolation voltage between input and output Viso : 5,000 Vrms
Safety approval
VDE DIN EN 60747-5-5 / IEC 60747-5-5
UL 1577 (E113898)
UL 508 (E490256)
CUL CA5A (E113898)
CQC GB4943.1-2011/GB8898-2011 (meet Altitude up to 5000m)
DEMKO IEC/EN62368-1; IEC/EN 60950-1; IEC/EN 60065
RoHS Compliance
All materials be used in device are followed EU RoHS directive (No.2002/95/EC)
Output Rating
Part Number Peak Off-state On-state RMS
Type Functional Diagram
Voltage Current
LTV-2213 0.9 A
Zero-Crossing
LTV-3213 1.2 A
600 V
LTV-2223 0.9 A
Random Phase
LTV-3223 1.2 A
1.2 Applications
Home appliances
Industrial equipment
1/10 BNC-OD-FC002/A4
Rev.: 25-Jun’18
Photocoupler
LTV-22X3 series
LTV-32X3 series
2. PACKAGE DIMENSIONS
2.1 Through Hole 2.2 Wide Lead
LTV-X2X3 LTV-X2X3M
2.3 SMT
Notes:
LTV-X2X3S 1. 2-digit year code
2. 2-digit work week code
3. Factory identification mark shall be marked
(W: China-CZ, Y: Thailand)
4. VDE option
5. Part number
(LTV2213, LTV2223, LTV3213, LTV3223)
2/10 BNC-OD-FC002/A4
Rev.: 25-Jun’18
Photocoupler
LTV-22X3 series
LTV-32X3 series
3. TAPING DIMENSIONS
3.1 LTV-22X3S-TA
LTV-32X3S-TA
3.2 LTV-22X3S-TA1
LTV-32X3S-TA1
LTV-22X3 series
Package Type
LTV-32X3 series
Part No.: LTV-22X3, LTV-32X3
Quantities (pcs) 1000
3/10 BNC-OD-FC002/A4
Rev.: 25-Jun’18
Photocoupler
LTV-22X3 series
LTV-32X3 series
Reverse Voltage VR 6 V
4/10 BNC-OD-FC002/A4
Rev.: 25-Jun’18
Photocoupler
LTV-22X3 series
LTV-32X3 series
Symbo
Min. Typ. Max. Unit Test Condition
l
Forward Voltage VF — 1.2 1.3 V IF=20mA
Input
Reverse Current IR — — 10 A VR=6V
IF = 20mA
RL = 100Ω
5/10 BNC-OD-FC002/A4
Rev.: 25-Jun’18
Photocoupler
LTV-22X3 series
LTV-32X3 series
Fig 1. ON-state RMS current vs. Fig 2. Peak ON-state voltage vs.
Ambient Temperature Ambient Temperature
1.5 1.5
1.45
LTV-3213, LTV-3223
1.2 1.4
LTV-2213, LTV-2223
1.35
LTV-2213, LTV-2223
0.9 1.3
1.25
0.6 1.2
1.15
0.3 1.1 LTV-3213, LTV-3223
1.05
0 1
-30 -10 10 30 50 70 90 110 -40 -20 0 20 40 60 80 100
Ta - Ambient Temperature - ° C Ta-Ambient Temperature -°C
Fig 3. Trigger LED current vs. Fig 4. LED dropout voltage vs.
Ambient Temperature Ambient Temperature
10 1.5
L E D d r o p o u t v o l t- aVg e
8 1.4
Trigger LED current - mA
IF = 5 0 m A
6 1.3
30mA
4 1.2
20mA
2 1.1 10mA
0 1
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
Ta - Ambient Temperature - oC oC
Ta - A m b i e n t Te m p e r a -t u re
6/10 BNC-OD-FC002/A4
Rev.: 25-Jun’18
Photocoupler
LTV-22X3 series
LTV-32X3 series
Fig 5. Turn on time vs. LED current Fig 6. Repetitive peak OFF-state current vs.
Load voltage
100 1.0E-03
60
1.0E-06
1.0E-07
40
1.0E-08
20
1.0E-09
0 1.0E-10
0 10 20 30 40 50 0 20 40 60 80 100
Trigger LED current - mA Load Voltage - V
Fig 7. Hold current vs. Ambient Temperature Fig.8 Testing diagram of Turn on time
12
LTV-2213, LTV-2223
10
Input
Hold current - mA
8
LTV-3213, LTV-3223
6 90%
4 Output
0
-40 -20 0 20 40 60 80 100
Ta-Ambient Temperature -°C
1 8
Load
R 2
RC V L (AC)
E1
IF 3 6
4 5
7/10 BNC-OD-FC002/A4
Rev.: 25-Jun’18
Photocoupler
LTV-22X3 series
LTV-32X3 series
Preheat
Soldering zone
20 sec
Ramp-up TP 260 C
TL 217 C
Temperature ( C)
Tsmin 60 sec
150 C tL (Soldering)
25 C
60 ~ 120 sec Time (sec)
35~70 sec
ts (Preheat)
8/10 BNC-OD-FC002/A4
Rev.: 25-Jun’18
Photocoupler
LTV-22X3 series
LTV-32X3 series
Temperature: 260+0/-5˚C
Time: 10 sec.
Temperature: 380+0/-5˚C
9/10 BNC-OD-FC002/A4
Rev.: 25-Jun’18
Photocoupler
LTV-22X3 series
LTV-32X3 series
7. NAMING RULE
LTV-X2X3(X)-(1)
DEVICE PART NUMBER
(1) ON-STATE CURRENT
Please refer to Page 1
(2) FUNCTIONAL TYPE
Please refer to Page 1
(3) FORM TYPE (S, M or none)
No suffix = Dual-Line package
M = Wide lead spacing package
S = Surface mounting package
Please refer to Page 2
(4) TAPING TYPE (TA, TA1)
Please refer to orientation of taping on Page 3
Example: LTV-2213S-TA, LTV-3223S-TA1
LTVX2X3(X)(1)-V
DEVICE PART NUMBER
(1) ON-STATE CURRENT
Please refer to Page 1
(2) FUNCTIONAL TYPE
Please refer to Page 1
(3) FORM TYPE (S, M or none)
No suffix = Dual-Line package
M = Wide lead spacing package
S = Surface mounting package
Please refer to Page 2
(4) TAPING TYPE (TA, TA1)
Please refer to orientation of taping on Page 3
(5) VDE option
Example: LTV2223STA-V, LTV3213STA1-V
8. NOTES
1. LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes
without further notices.
2. The products shown in this publication are designed for the general use in electronic applications such as office automation
equipment, communications devices, audio/visual equipment, electrical application and instrumentation.
3. For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control
equipment, medical equipment, etc, please contact our sales representatives.
4. When requiring a device for any ”specific” application, please contact our sales in advice.
5. If there are any questions about the contents of this publication, please contact us at your convenience.
6. The contents described herein are subject to change without prior notice.
7. Immerge unit’s body in solder paste is not recommended.
10/10 BNC-OD-FC002/A4
Rev.: 25-Jun’18