Professional Documents
Culture Documents
End Sem ED
End Sem ED
Hi RONAK MARU, when you submit this form, the owner will be able to see your name and email address.
* Required
Admission No. *
Example: U19CH005; I19PH099
U19CH073
Roll No. *
Example: J06, K27
J97
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZM… 1/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
Name of Student *
Ronak Maru
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZM… 2/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
The hypocycloid having a diameter of the rolling circle one-half that of the
generating circles resembles ________. *
(1 Point)
Straight line
circle
none of these
ellipse
The nature of the lateral surface of a cylinder with a 20mm diameter and 30 mm
height is… *
(1 Point)
If a polyhedron is cut by any section plane, the true shape of the section is a
closed figure made up of *
(1 Point)
Straight lines
Any of these
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZM… 3/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
Curves
The solid will have two dotted lines in the top view when it is resting on its face
in the H.P. The solid will be *
(1 Point)
Square pyramid
Hexagonal pyramid
All of these
Pentagonal pyramid
10
Octagon
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZM… 4/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
Parallelogram
Square
Any of these
11
0.5
12
If both the principal views of a plane object are ellipse of the same size, the side
view is *
(1 Point)
Horizontal line
Inclined line
Ellipse
Vertical line
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZM… 5/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
13
In the first angle projection method, the left-hand side view of an object is
drawn exactly… *
(1 Point)
14
If a line is inclined at 45 degrees to the H.P. and 30 degrees to the V.P., its front
view is inclined at *
(1 Point)
30 degrees to xy
45 degrees to xy
15
6
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZM… 6/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
16
Horizontal plane
Profile plane
Vertical plane
17
None of these
Reduction scale
Enlargement scale
18
A cone resting on its base on the H.P. is cut by a section plane parallel to V.P.
has its sectional front view as *
(1 Point)
Semi-circle
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZM… 7/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
Hyperbola
Parabola
Ellipse
19
A cube is resting on H.P., with a solid diagonal perpendicular to it. The top view
will appear as *
(1 Point)
Irregular hexagon
Regular hexagon
Square
Rectangle
20
90 π
60 π
120 π
30 π
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZM… 8/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
21
All of above
22
Auxiliary plane
Profile plane
Vertical plane
Horizontal plane
23
120 mm
130 mm
140 mm
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZM… 9/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
110 mm
24
A 90 mm long line PQ, inclined at 30 degrees to the H.P. and 45 degrees to the
V.P. has end P 15 mm above H.P. and 25 mm in front of V.P. The other end Q
will lie in *
(1 Point)
Any of these
third angle
first angle
25
20 mm
40 mm
60 mm
80 mm
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZ… 10/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
26
If a line is inclined at 30 degrees to the H.P. and 60 degrees to the V.P., it's front
and top views are inclined at an angle of *
(1 Point)
Both at 90 degree to xy
27
A cutting plane is inclined to the H.P. and perpendicular to the V.P., Which
shape of view will appear in three principle planes? *
(1 Point)
28
Dimension line
Leader
Projection line
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZ… 11/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
Arrow heads
29
HB
30
If a semicircular thin sheet is folded to form a cone, then the front view of the
cone appears as *
(1 Point)
Semicircle
Rectangle
Equilateral triangle
Isosceles triangle
31
The curves generated by the rolling contact of one curve or line on another
curve or line are called ________. *
(1 Point)
Spiral
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZ… 12/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
roulettes
Conic sections
Involute
32
The front view of a point is 50 mm above the reference line and the top view is
20 mm below the front view. The point lies in *
(1 Point)
Third angle
First angle
Fourth angle
Second angle
33
A cube is resting on a face in the H.P. with vertical faces equally inclined to the
V.P. It is cut by an A.I.P. passing through the solid diagonal. The true shape of
the section view is *
(1 Point)
Square
Rhombus
Rectangle
Hexagon
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZ… 13/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
34
All of these
Mini drafter
T-square
Pair of Set-squares
35
D/2
d/2
36
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZ… 14/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
To draw a circle
37
None of these
Square millimetre
Millimetre
Cubic millimetre
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZ… 15/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
38
a rhombus
an ellipse
a circle
a spiral
39
20 mm below xy
30 mm above xy
20 mm above xy
30 mm below xy
40
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZ… 16/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
41
In the third angle projection method, the relative positions of the object, plane,
and observer are, *
(1 Point)
42
80 mm
100 mm
60 mm
None of these
43
44
45
State the position of a point, the front view of which lies on the reference line
and the top view is 40 mm above it. *
(1 Point)
46
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZ… 18/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
Line of symmetry
All of these
Centre lines
47
There is a need to extend the line to the boundary of another object, suggest a
suitable command. *
(1 Point)
Fillet
Line
Spline
Extend
48
There are two fixed points A and B. Another point P moves in such a way that
PA and PB are always at right angles. The locus of P is _______ . *
(1 Point)
Hyperbola
Parabola
Ellipse
Circle
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZ… 19/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
49
A right circular cone resting on a generator in the H.P. and axis inclined at 45
degrees to the V.P. The angle between the reference line and the top view of
the axis is *
(1 Point)
45 degree
Any of these
50
Set-squares can draw lines (with precision) inclined with the horizontal line at an
angle in multiples of ________ degrees. *
(1 Point)
20
10
15
51
A curve traced out by a point moving uniformly along a straight line towards
the pole, while the line revolves about its one of the ends with uniform angular
velocity is ________. *
(1 Point)
Cycloid
Involute
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZ… 20/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
Logarithmic spiral
Archimedean spiral
52
108
100
75
120
53
Scale
Submit
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZ… 21/22
7/24/2020 End Semester Examination (Engineering Drawing) J and K Divisions
This content is created by the owner of the form. The data you submit will be sent to the form owner. Never give out
your password.
https://forms.office.com/Pages/ResponsePage.aspx?id=Z80yWOHOckGZaLy_Z0Ym7OsKdVocWkRCsjvYH1DGRJ5UNjNXSEMwRU0yQTRSUzJZ… 22/22