Professional Documents
Culture Documents
Bang Olufsen Beolab 1 SSRG
Bang Olufsen Beolab 1 SSRG
Bang Olufsen Beolab 1 SSRG
User’s guide
Legal notice:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Daily use
10 Switching on and off – indicator
10 Loudspeaker protection
10 Cleaning the BeoLab 1
4 How to set up the BeoLab 1 loudspeaker
Due to the weight of the base Assembly: While the BeoLab is still lying on
plate, it is packed in a separate box. the packaging, lift it up at the base-end and
BeoLab 1 front
Open the box with the base plate, place an extra piece of packaging material
underneath.
find the bag with the screws and
Fix the base plate into place. The groove for the
the Allen key, then assemble the cables must point downwards (A), and the base
column and base plate as plate guiding pin will engage the corresponding
illustrated. hole in bottom part of the column. Fasten the
base with the six screws provided.
You gain access to the BeoLab 1 …to a Bang & Olufsen product
socket panel through the base
Connect the BeoLab 1 to your audio (or
plate. video) system using the enclosed 8-pin
Power Link cable:
So, connect the cables (and set the • Plug one end of the cable into one of the
two switches) while the BeoLab 1 sockets marked POWER LINK on the BeoLab 1,
is still lying on the packaging. and the other end into any one of the two
sockets marked POWER LINK on the audio L R
The setting of the L • R • LINE or video system (please refer to the Guide
switch is explained on this page, for the system in question).
• The switch marked L • R • LINE must be set
and the setting of the Speaker to either L or R:
Position switch is explained on L for the left-hand speaker/sound channel;
pages 8–9. set the switch to its utmost left position.
R for the right-hand speaker/sound channel;
Use the overview on the next page set the switch to its middle position.
and the graphics imprinted on the
Looping the signals through from speaker
socket panel for reference, when to speaker…
locating the sockets and switches. To avoid cables running from both loud-
speakers to your system, you can loop the
Note: To make a neat installation, signal through from speaker to speaker:
we suggest that you run the cables • Connect one BeoLab 1 loudspeaker to your
through the cable cover as system as previously described, e.g. the left-
hand speaker.
explained on the next page. • Make a connection from the first BeoLab 1 to
L R
Speaker Position:
~3m
IN CORNER 10'
AGAINST WALL
FREESTANDING L R
~3m
10'
L R
10 Daily use