Professional Documents
Culture Documents
Kubota 2016 KV RM Plough IEN
Kubota 2016 KV RM Plough IEN
K U B O TA P L O U G H S
RM2000/RM3000 SERIES
Mounted Reversible Ploughs
FOR ALL REQUIREMENT
HEADSTOCKS
3
VARIATION ON THE MOV
VARIOMAT ®
Kubota Variomat ® system allows
the optimal match between the
soil conditions, the plough and the
tractor for the maximum output.
Kubota‘s patented Variomat ®
is the most reliable system on
the market. It also ensures the
correct parallel linkage along
the whole plough. The pulling
line adjustments are hence
automatic. The benefits are easy
handling, low draft requirements,
low wear and tear.
4 50 cm/20" 30 cm/12"
VE
Auto-Line:
Kubota Auto-line system is a
standard device which guarantees
the correct pulling line at any time.
When changing the working width,
both front furrow width and pulling
line adjust accordingly. Kubota
Auto-line system makes these
adjustments automatically. The
position of the headstock remains
in the center of the tractor, all the
time, ensuring a favorable and an
even geometry of the three point
linkage. Side pull and unnecessary
high landside pressure are
therefore avoided. Consequently,
the Kubota Auto-line system
ensures an efficient ploughing with
less fuel consumption.
Minimum wear:
The heat-treated mainframe
together with the bolt, distance
tube, two cones and bushes
ensure a unique non-wearing pivot
joint between the beams and the
mainframe.
5
EFFICIENT IN STONY CO
NON-STOP
6
ONDITIONS
Release characteristics
Benefits
The Kubota leaf spring Non-stop 0
system is highly recommended. 1 5 10 15 20 25 30 35
When hitting an obstacle, the
Release height (cm)
pressure on the point, frame, plough
parts, decreases.
Hydraulic system Coil spring system Non-stop
HD package with 9 leaves (900 kp) Double spring package: with 14 leaves (1400 kp)
7
DESIGNED FOR HIGH PE
PLOUGH BODIES
Designed for high performance Low pull requirement Wide choice of bodies
Kubota bodies benefit from an outstanding Recent university studies, FH Cologne Kubota has designed bodies which are
design: for high agronomic performance and Wilsmann 2012, have revealed that adapted to any soils conditions.
and for low wearing. the design of Kubota bodies offer some
of the lowest pulling forces on the market:
from -20% to -42% when ploughing
at 20 cm working depth and -11% to
-24% at 30 cm. It is therefore possible to
plough with 1 extra Kubota body and gain
in output compared to competition. As
regard to fuel consumption, it is reduced
by 19% to 28% when using a Kubota
plough.
8
ERFORMANCE
Body No. 28: The answer for Low pulling forces Benefits:
ploughing with wide tyres Body No.28 is suitable for depths from 15 • very wide empty furrow – ground
to 30 cm (6 to 12 inches) and widths from preserving tyres
Wide empty furrow 35 to 50 cm (14 to 20 inches). Longer than • easy pulling and therefore low fuel
Body No.28 shape and action moves body No.8, it creates a flatter profile for consumption
the soil further away from the landside, improved tilth. The furrow is well turned • good turning and well packed
increases the furrow bottom width by as and packed. Body No.28 clever design will • good trash burial
much as 25% compared to Body No.9. require as little pulling force as Body No. • perfect universal body for all soils
This allows wide tractor tyres lile a 710 8 or 9.
serie type, to work in the furrow without
rolling down the previous furrow.
9
PERFECT FOR LIGHT TO
RM2000/RM2005
Kubota RM2005
designed for stony conditions.
Step-wise working width adjustments.
Light and robust hollow beam with shear bolt Robust headstock 150
protection
It is very robust but also flexible. Invisible Robust frame section Headstock 150
vibrations of the plough beam result in an The main frame is an induction heat Headstock 150 designed for tractors
improvement of crumbling. treated one box section 150 x 150 mm. up to 150 hp ”One piece concept” with a
Hence, the necessary strength and specially heat treated 110 Ø main shaft for
support is achieved for the toughest maximum strength. Choice of cross shaft,
conditions. No welding in order to avoid category II and III or optional quick
weaknesses. coupling.
11
ADAPTABLE
RM2000V/RM2005V
12
Easy to use
Easy to operate For the Variomat® models RM2000V- The Kubota auto-line system
The furrow width adjustment not only RM2005V, easy adjustments on the move always provides the correct pull line.
increases the ploughing output but from 30 to 50cm (12-20“)
reduces the fuel consumption in relation to All models are available with an interbody
output. Easy adjustment clearance of 85 cm or 100 cm. The
The front furrow can easily be adapted to RM2000 serie offers 3-5 furrow ploughs
For RM2000-RM2005 : simple step-wise different tractor brands and wheel width with the exception of RM2005-RM2005V,
ploughing width adjustments. Only 1 bolt settings. This is done via a parallelogram, 100cm interbody clearance, which are
to reposition. manually adjusted by a turnbuckle or available as 3-4 furrow ploughs. Most
• 30,35,40,45 cm (12,14,16,18“) for 85cm optional with a hydraulic cylinder. A models are extendable by 1 body to the
interbody clearance. memory or a hydraulic alignment of the limits above mentioned.
• 35,40,45,50 cm (14,16,18,20“) for frame is available.
100cm interboby clearance
13
FOR TOUGHER CONDITI
RM3000V/RM3005V
Variomat® Ploughs
Kubota RM3000 serie can then be achieved with even lesser Model differences
These are compact ploughs, easy to lift, fuel consumption per Ha. An interbody The RM3005V model is fitted with a well
equipped with the Variomat® system to clearance of 100 cm is also available. proven Kubota Non-stop system for stony
work in any soil conditions. conditions, whilst the RM3000V has
Variations “on the move“ shearbolt protections (4.200 kg release
Variomat® ploughs The Variomat® is simply operated via a pressure).
The RM3000V-RM3005V are fitted with the turnbuckle or a hydraulic cylinder. The front
Variomat® for easy furrow width adjustments. furrow is adjusted separately in the same
This system helps you save time, optimise manner. With the hydraulic version, the
the output to the field conditions and save working width can be adjusted on the move.
fuel consumption per Ha.
For extra comfort while reversing the
For instance, you can vary the working RM3000V–RM 3005V can be fitted with a
width from 30 to 50 cm (12-20“) on sequence hydraulic automatically bringing
the RM3005V with 85 cm interbody the plough to the narrowest working width
clearance. 20-40% extra performance before turning
14
IONS
Low lift requirements & more section 150 x 150 mm (no welding that Add-on system
stability would weaken the frame robustness). Any 3, 4 and 5 furrow models can be
The first assembly mounted to the main extended by one body, max. 6 furrow
support allows the plough to be as close The reliability and service life of a reversible plough.
as possible to the tractor. Therefore the plough largely depends on the
lift requirements are significantly reduced headstock. During both work and The RM3000 serie features a rear or a
compared to other brands. This smart transport, this critical part of the plough frame mounted wheel.
design also contributes to a greater is exposed to enormous stresses. The
tractor and plough stability, particularly RM3000V-RM3005V are therefore fitted
appreciated on hilly grounds. with the robust Kubota headstock 200.
Constructed for year in, year out Suits all tractor models
performance The smart design of the headstock 200
For maximum strength and durability, the allows easy adaptations to suit any tractors
mainframe of the plough is constructed irrespectively of wheel widths or linkage
from only one induction heat-treated box geometry constraints.
15
QUICK & EASY
16
ACCESSORIES: KUBOTA KNOCK-ON ®
17
ACCESSORIES
Leg protection Maize skimmer
RM2000-RM2000V RM3000V
Manure skimmer
Shear bolt leg
Release pressure of:
• 3400 kp for models RM2000-RM2000V
• 4200 kp for model RM3000V
18
Shares with Reversible Points Trashboards Sword Share Knives
The most cost effective ‘share’ system Particularly useful for large quantities of These are an alternative to disc coulters, either
for ploughing hard and abrasive soils and surface trash: manure, straw, etc. are present. to reduce weight or to avoid blockage from
generally, difficult conditions. trash or stones. Can only be used on ploughs
fitted with reversible points.
19
WHEELS
20
Rear mounted depth wheel telescopic arm Rear mounted depth wheel Frame mounted depth and transport wheel
• also available as frame mounted depth • rubber wheel 200 x 14,5 or 320/60 x 12 • rubber wheel 200 x 14,5 or 320/60 x 12
wheel • hydraulic shock absorber included • option: scrapers
• 6.00 x 9, 200 x 14,5 or 320/60 x 12 • option: scrapers
• option: scrapers
Rear mounted depth wheel Rear mounted depth and transport wheel Rear mounted depth and transport wheel
• rubber wheel 6.00 x 9 • rubber wheel dimensions: 200 x 14,5 or with hydraulic depth adjustment
• designed for small plough models 320/60 x 12 • rubber wheel 200 x 14,5 or 320/60 x 12
• option: scrapers • ideal for a shallow finish on headlands
• option: scrapers
21
PERFECTION
22
SPECIFICATIONS
Kubota Model RM2000 RM2005 RM2000V RM2005V RM3000V RM3005V
Weight (kg)
Most models can be extended by one body. Weights and lifting requirements are given Most ploughs with stepless ploughing width
All weights are given without optional for ploughs with 85 cm ‘interbody clearance’. and interbody clearance of 85 cm have a
equipment (net weights). working width between 30-45 cm, while
For ploughs with 100 cm clearance, please ploughs with 100 cm have a working width
The lift-requirements are given with the adjust according to the following: Weight + between 35-50 cm.
following equipment: depth wheel, one 15 kg/body, lifting requirement + 50 kg/ * for 100 cm interbody clearance only
coulter and skimmers for all furrows. body. ** only 85 cm Interbody clearance
23
The company reserves the right to change the above specifications without notice. This brochure is for descriptive purpose only. Some of the items pictured in this brochure are optional and not
standard equipment. Please consult your local Kubota dealer for warranty, safety or product information. For your safety, Kubota strongly recommend the use of a seat belt in all applications.
©2015 Kverneland Group Operations Norway AS