Professional Documents
Culture Documents
Chapter 4
Chapter 4
4.1 INTRODUCTION
regarding the function and data about this drift cart for operation in the project area. In
addition, it should describe the results or results obtained after implementing a project that is
This analysis is very useful for user. Then, this type of theoretical analysis is an
analysis using calculations using conditional formulas for each part that used in drift cart.
mechanical methods. Theoretical analysis can be used for projects that use calculations such
From the observation done by all in the group, the project has already
indicated some problems and weaknesses due to there were several components that were not
suitable and not capable to do the job properly. The problem is the design itself does not have
proper design to drifting. To solve this problem that was found, a comparison between drift
kart and go kart must be done before building a new design to make sure it can drift. Below
in the table 4.1 is the comparison of design between drift kart and go kart
Table 4.1: Comparison between drift kart and go kart
cornering
Have a better seat position to SEAT POSITION Don’t have better seat
Got gearing for the change of TRANSMISSION Don’t have gearing because
From the result, drift kart design has a better performance in drifting than go kart
design. The reason of re-designed is to make sure the chassis and the handling can handle for
drifting.
4.2 ANALYSIS
Here is the analysis of the engine that been used in this project. Starting
ENGINE SPECIFICATION:
ELECTRICAL SYSTEM:
TRANSMISSION SPECIFICATION: