Professional Documents
Culture Documents
PQube Classic Configurator App Note
PQube Classic Configurator App Note
PQube Classic Configurator App Note
At PSL, we make it easy to configure your PQube using our Configurator Program. This easy-to-use graphical
interface runs on Windows. Simply click on each tab to configure your power parameters, CT ratios, event trigger
thresholds, email addresses and more! When using the Configurator to edit your Setup.ini, it automatically adds
the new tags with each new firmware release.
1|P a g e
Application Note: How to edit your Setup.ini with the PQube Classic Configurator program
Match your Setup.ini with the PQube firmware version. For example, if you are upgrading from firmware 2.1.7 to
2.1.8, select ‘Firmware version 2.1.8’ from the drop down box.
Click on each tab to configure your PQube settings. For example, if you are measuring current using
200A:0.333V CTs, click on the ‘AC Current’ and enter the Current Transformer ratio of 200:0.333. A CT
ratio is required in order for your PQube to correctly calculate your current readings.
Move your mouse over the comment section to get detailed information on the settings.
2|P a g e
Application Note: How to edit your Setup.ini with the PQube Classic Configurator program
When you are done editing your Setup.ini, click on 'File', 'Save’. Do not rename the file. The PQube only
recognizes ‘Setup.ini’. Don’t forget to copy over your new Setup.ini file to your PQube! You can copy it
directly onto to the SD card, transfer it via FTP, or upload it via the PQube’s web page. Your PQube
requires a reboot to load your new settings.
3|P a g e