Professional Documents
Culture Documents
ECNF19008 TS-CSA-Detector Sensing Function, - Auto Tracking Function, LCD Rotation Speed (3 Bug Issues)
ECNF19008 TS-CSA-Detector Sensing Function, - Auto Tracking Function, LCD Rotation Speed (3 Bug Issues)
ECNF19008 TS-CSA-Detector Sensing Function, - Auto Tracking Function, LCD Rotation Speed (3 Bug Issues)
ECNF19008
1. Information
TS-CSA : Detector sensing function, Auto Tracking function, LCD Rotation
Subject
Speed (3 Bug Issues)
Registration Number ECNF19008
Revision Number 0
Department R&D
In TS-CSA System of EMC 3rd case, if the firmware version of Ceiling Main
Control Board is V1.00.14 or V1.00.15, it must be changed to V1.00.16
firmware.
Change Information
F/W Ceiling Main Control Board Ver 1.00.15 Ver 1.00.16 Function Change
Ceiling Switch Control
F/W Ver 1.00.04 Ver 1.00.05 Function Change
Board
F/W Communication Board Ver 1.00.08 Ver 1.00.09 Function Change
DRGEM Corporation
ECNF19008
2. Description of change
1. Detector sensing issue (PBT)
TS-CSA has function for sensing direction of 17x14, 17x14 detector in PBT
(EMC 3rd)
We prepared firmware for EMC 4TH. This firmware can be installed for EMC
3rd and EMC 4TH both System.
But when we installed this firmware on EMC 3rd System, TS-CSA cannot
detect whether detector is mounted in the Bucky tray of PBT or not and
Reason for change detector direction.
Software N/A
Ceiling_Main_Control_Board_V1.00.16
Firmware Communication_Board_V1.00.09
Ceiling Switch Control Board_V1.00.05
Hardware N/A
Document N/A
DRGEM Corporation
ECNF19008
Modified contents
- TS-CSA checks direction of 14x17, 17x14, 17x17 Detector via limit switch.
- In EMC 3rd case, TS-CSA cannot detect whether detector is mounted in the Bucky tray of PBT
or not and detector direction.
- Application method of EMC 3rd and EMC 4th equipment is different. The Application method is
as follows.
In case of EMC 3rd equipment, Turn ‘off’ Table Communication button of ETC tab in
System Setting as shown below.
In case of EMC 4th equipment, Turn ‘on’ Table Communication button of ETC tab in
System Setting as shown below.
DRGEM Corporation
ECNF19008
- In right direction of WBS case, the Bucky tray in PBT move opposite direction of Tube angle.
3. Contact Point
Customer Support Team
E-mail: cs@drgem.co.kr
Tel: +82-70-8230-8541
DRGEM Corporation