Professional Documents
Culture Documents
Actuator 1158010 Technical Data
Actuator 1158010 Technical Data
Technical information
Tender specification:
Oventrop electromotive actuator for steady control. The actuator
can be used for two-point, three-point or proportional control
(0-10 V), with squeeze connection. Type of characteristic line is
adjustable.
Adapter for Oventrop valves is enclosed.
Performance data:
Operating current: 24 V ~/=
Power consumption: 2.5 - 5 W
Drive: 0 - 10 V Dimensions with mounted adapter:
Max. piston stroke: 10 mm
Operating power: 500 N
Floating time: 7.5 / 15 s / mm
63
43,5
Protection: IP 54 according to EN 60529
Max. fluid temperature: 120 °C
Ambient temperature: -10 °C - 55 °C
157
Installation:
The connecting cable must not come into contact with the hot
pipe as excessive heat will accelerate the ageing of the cable in-
sulation. 35
122
Electrical connection must be carried out in accordance with the 126.5
requirements of the local Electricity Board.
The Oventrop electromotive actuators can be installed in any posi- Connection diagrams:
tion, except for vertical downward position. Variant
Variante1 1(3pt)
(3pt)
Depending on the wiring (see connection diagram), the actuator 24 V~/=
open/stop/close
can be used as 3-point, 2-point or 0-10 V actuator.
BU BN BK RD GY
Application: MM 01 02 03 05
The actuators can be combined with the “Cocon QTR” valves
DN 40 and DN 50.
Variant
Variante2 2(2pt)
(2pt)
24 V~/=
Function: open / close
key
Paul-Oventrop-Straße 1 MM 01 02 03 05
D-59939 Olsberg
A/D P
Phone +49 (0)29 62 82-0
Fax +49 (0)29 62 82-450
E-Mail mail@oventrop.de
Internet www.oventrop.com
M
Subject to technical modification without notice.
Product range 3
ti 242-1/10/MW Gedruckt auf chlorfrei
Edition 2011 gebleichtem Papier.
2011 Oventrop 1