Professional Documents
Culture Documents
Service Guide: Push-Type Grease Gun
Service Guide: Push-Type Grease Gun
Each model gun can be filled from a loader Models 7584, 7584-F, and 7584-Z
pump through the Loader Fitting or directly by
The coupler and push-type nozzle on models 7584 and 7584-Z are
hand. See Page 4 for details.
used on standard hydraulic fittings. Model 7584-F contains a flush-
type nozzle for use with standard flush-type fittings. See Figure 1.
Coupler
Stem Assembly
Cylinder
Loader Fitting
Gun Operation
CAUTION
These guns can develop up to
4200 psi (290 Bars) pressure.
Handle
Maximum Operating
Nozzle Cylinder Capacity Delivery/Stroke Pressure
Gun Model Coupler
Flush-Type Push-Type Ounces Grams Ounce Grams psi Bars
7584
7584-Z
Figure 1 Push-Type Grease Gun Model 7584 Series - Model 7584 Shown
Alemite Corporation
PO Box 473515, Charlotte, North Carolina 28247-3515
Detail A
Illustrates Items 6, 7, and 8 Assembled
Stake Point
3
4
A Packing Ring 5
6 Retaining 1
Washer
7
8
Point Groove
Toward
Coupler (Nozzle) 9
11
10
12
14
15 13
16 17
18
19
20
21
Repair Kit
CAUTION
The Loader Fitting on the gun must mate with the
loader coupler. The pump may not operate if the
Loader Coupler
components are not compatible.
Seal
CAUTION
Loading the gun by hand may create air pockets in
the grease. Should this occur, the air/grease mix
will dispense into the lubrication fitting.
Operate the Gun 2. Lightly tap the gun’s Loader Fitting several times on a
flat surface.
In most cases the gun will prime simply by operating
the gun several times with the Coupler (Nozzle) 3. Operate the gun several times once again unattached to
unattached to a lubrication fitting. a lubrication fitting.
CAUTION
Do not tap the gun on the Coupler or Nozzle. Dam-
age to internal components can occur.
Troubleshooting Chart
Gun Indications Possible Problems Solution
Gun does not pump Air pockets in the grease Prime the gun
Gun lacks pressure 1. Worn or damaged Ball (5) 1. Use Repair Kit 393668
(Models 7584-F and 7584-Z) 2. Worn or damaged seat on Stem and 2. Replace Stem and Washer
Washer Assembly (10) Assembly (10)
Gun lacks pressure Worn or damaged valve within Replace Coupler (1)
(Model 7584) Coupler (1)
External Leakage
Grease leakage visible at Handle and 1. Worn or damaged Leather Cup (18) 1. Use Repair Kit 393668
Cup Assembly (21) and/or Plunger (19)
2. Damaged Cylinder (13) 2. Replace Cylinder (13)
Grease leakage visible between Initial tightening of Piston Slide Cup (6) Tighten Piston Slide Cup (6) into
Cylinder (13) and Piston Slide Cup (6) into Cylinder (13) not sufficient Cylinder (13)
Grease leakage visible at Stem and 1. Worn or damaged Packing Ring in 1. Use Repair Kit 393668
Washer Assembly (10) Piston Slide Cup (6)
2. Initial tightening of Coupler (1) 2. Tighten Coupler (1) [Nozzle
[Nozzle (2 or 3)] not sufficient (2 or 3)] onto Stem and Washer
Assembly (10)