Professional Documents
Culture Documents
Aquastop MS 2
Aquastop MS 2
مواد البناء
Construction Material Chemical Industries
C.R. No: 2050028294 www.cmci-sa.com
E-mail: info@cmci-sa.com
F. Application
1. Apply a thin layer (approximately 1.5mm) of AQUASTOP mixture slightly wider than
the width of the fabric. Spread the paste using trowel, squeegee or brush.
2. Immediately unroll and embed the fabric into the wet mortar.
3. Spread another thin layer of AQUASTOP mixture on top of the fabric until it
completely and uniformly covers the fabric.
4. Lap the fabric at 2” at seams.
5. Inspect the applied membrane for pinholes and holes.
G. Curing
AQUASTOP is a self-curing system. However when the area is exposed to sunlight or
very warm temperature, use wet curing. Allow to cure for at least 7 days.
H. Clean Up
Equipment and tools should be cleaned immediately after use with water.