Professional Documents
Culture Documents
Baby
Baby
In this digital dice circuit, we have used 6 LEDs, each LED represent a number (1-6) of
Dice. LEDs start flashing as we press the Push button and stops when we release it. After
release, illuminated LED tells the numbers, you got on Dice. Like if fifth no. LED remains
ON after releasing the button, means you got 5 on Dice. We have connected 6 LEDs to the
output Q0 to Q5, and the seventh output Q6 is connected back to the RESET PIN 15. So that
after LED 6 it starts from the First LED at Q0.
EXPLANATION:
Used the schematic diagram to learn the connection to guide you from actual
connection of the electronic dice. Be sure that the connection is correct especially
from diode connection arrangement sequence. if you get first the connection from
diode the rest will be easy to connect. The important of this electronic dice connection
is the way you know the pattern of the connection. Be careful with the connection
from positive and negative if one got connection wrong the led diodes will not work.
Always double checked with your connection, because the connection is important
with the right path connection follow the path it always sure the connection will
successfully work.
First attempt was we say that hard to connect the component to other component at actual,
the reason is for a lot of component need to connect. So we analysis it to make lighted the
LED’s. Until we made it and work correctly.
VIII: APPLICATIONS:
BOX
ART WORK
PENCIL COLOR
BOND PAPER
SAN FRANCISCO INSTITUTE OF SCIENCE AND TECHNOLOGY
MARRYLYN ARCIGA
ECT 1A TRAINER: