Professional Documents
Culture Documents
Implant Libraries Instructions
Implant Libraries Instructions
creation.
Contents
What’s this? ........................................................................................................................................ 2
2 How we validate implant libraries ................................................................................................. 3
3 Mandatory components ............................................................................................................... 4
3.1 Scanbody .............................................................................................................................. 4
3.2 Implant Interface.................................................................................................................... 4
3.3 Screw radius ......................................................................................................................... 6
4. Optional components ................................................................................................................... 7
4.1 Analog holder ........................................................................................................................ 7
4.2 Minimum body ....................................................................................................................... 7
4.3 Maximum body ...................................................................................................................... 9
4.4 Multi-unit implant kit ............................................................................................................ 10
5. Pricing ........................................................................................................................................ 12
What’s this?
It delineates:
Page 2 of 12
2 How we validate implant libraries
Upon integrating the components of the implant kits, it is requisite to submit the
corresponding library to Dental Wings for validation, a process that does not
incur any fees. Subsequently, Dental Wings will conduct a thorough analysis of
the files and propose modifications if deemed necessary.
After completion of the implant library, additional testing can be conducted on the
implants using a variety of demonstration cases.
Subsequently, the validated implant library can be made available for download on
your website or through alternative channels deemed appropriate.
Important Notice:
Please be advised that our validation process is exclusively focused on ensuring the compatibility
of implant libraries with Dental Wings software solutions. We do not undertake the validation of
the accuracy of digital files in comparison to their physical counterparts provided by the implant
manufacturer. It is imperative to acknowledge that the responsibility for the physical testing of
implant kits lies solely with the implant manufacturer, as they are the authorized entity for such
assessments.
Page 3 of 12
3 Mandatory components
• scanbody file
• implant interface file
• screw radius
In accordance with Dental Wings guidelines, STL files are required to be aligned with the Y-axis
and saved in binary format. No specific minimum count of triangles per file is stipulated. The size
of an STL file can range from 100 KB to 500 KB.
3.1 Scanbody
• The triangles of the top face of the interface should all share a
common central point as shown below.
Page 4 of 12
TiBase interface – Example 1
Page 5 of 12
TiBase interface – Example 2
Page 6 of 12
4. Optional components
The minimum body STL file is discretionary, serving as a safeguard for the
interface and enhancing the structural integrity of a prosthesis with a designated
minimum size. This STL file possesses a sole boundary at the base, precisely
aligning with the interface. The interface is denoted by the yellow and purple
components in the illustration, while the transparent segment on top corresponds
to the minimum body.
Page 7 of 12
The border lines of both the interface and the body must align precisely at the same position.
Page 8 of 12
4.3 Maximum body
The designated STL file functions to constrain the dimensions of the prosthesis.
The maximum body encapsulates the configuration of the interface, necessitating
a closed surface without boundaries. Additionally, it is essential to ensure that the
interior of the STL file constitutes a vacuum.
The maximum body encompasses both the interface and the minimum body
Page 9 of 12
4.4 Multi-unit implant kit
In the context of multi-unit implant kits, the angled part is regarded as the implant
connection. Specifically, the interface must be aligned and centered along the vertical
axis. This orientation is crucial, given that the scanbody is affixed to the angled part
and not directly to the implant.
Page 10 of 12
Prior to the development of the implant kit, it is imperative to ensure that the STL files
are situated within the same referential coordinate system, aligned along the vertical
(Y) axis, with the center of the implant head positioned at 0x0x0.
Upon completion of the verification process for all necessary components, we will furnish you with
the implementation plan and proceed with the creation of the implant kits.
Page 11 of 12
5. Pricing
According to the library we received from your end, we have identified a total of 400 components
spanning across all systems.
The testing and implementation process is estimated to demand approximately 45 to 60 hours,
contingent upon the quality of the STL components.
Our minimum hourly fee for these services is $60 per hour, and we propose to bill you accordingly
for the mentioned duration.
Page 12 of 12