OK 74.78
OK 74,78 is an LMA elect
cannot be applied.
ode sullable for we fa
toughness down to 40°C. Very suitable for both the enclosed welding and cladding of rails, when a hardiness of at
250 HV is required. The moisture content of the coating is very low, which makes OK 74.78 suitable when prehe
jh tens
Classifications:
SFAVAWS AS.5:E9018-D1, EN ISO 18275-AcE 55 4 MnMo B 3 2 HS
‘Approvals:
(CE EN 13479, DNV 3Y H5, DB 81.39.02, DB 82,089.02, vaTUV 01027,
ABS 8YQ460M HB
‘Approvals are based on factory location Please contact ESAB for more information
Welding Current: AC, BC+
Diffusible Hydrogen: <5.0 mV/1009)
Alloy Type: 0.4% Mo
Coating Type: Lime Basic
Condition Yield Strength Tensile Strength Elongation
Iso
As welded 600 MPa (650 MPa 24%
Condition Testing Temperature Impact Value
Iso
‘As welded -40°C wd
‘As welded 50°C 70u
(0.05 1.60
0.35
(0.08 (0.03
0.35
Diameter Current. Voltage kg weld metal/ [Number of [Fusion time | Deposition
kgelectrodes |electrodes/kg [per electrode | rate 90% | max
weld metal [at 90% I max
2.5x360mm [75-100 22 0.62 73.0 55s (0.90 kath
32x450mm |105-140A — |23V (0.65 320 es 1.80 kg/h
40x450mm |140-190A — |2aVv (0.65 205 o7s 1.80 kg/h
5.0x450mm |190-260A —|2av 0.68 140 1008 2.60 kg/h
6.0x450mm |240-040A [24 (0.69 10 103.5 3.6 kgh
124 esab.com