Professional Documents
Culture Documents
IGUS - Rod End Bearings
IGUS - Rod End Bearings
Special properties of
igus® GmbH
igus® UK Ltd
linear movements
Light weight
www.igus.co.uk
Loads
51.2 Lifetime calculation, CAD files and much more support www.igus.de/en/igubal
www.igus.co.uk/en/igubal
igubal® | Technical data
Coefficients of Friction and
Speed
igubal®
ring. In metallic rod ends, rotary motion takes
place between the race and the spherical
bearing. High speeds can be achieved with
igubal® bearings.
igubal® bearings are used in such a way that
the angular movements of the spherical
6749-145
6749-334
72 40
72 45
bearings take place at the outside diame-
ter. By contrast, rotations of the shaft are Picture 51.1: igubal ® rod end bearings in a confectionery
supported directly in the inner diameter of decorating machine
04- -96
04- -96
the spherical bearing. The advantage there-
fore lies in the polymer vs. steel relationship.
- 221603
- 221603
Polymer produces lower friction and permits
high speeds, even when running dry.
+49 (0)
+49 (0)
The maintenance-free igubal® bearing system
Phone +44
+44
is also suitable for linear and oscillating shaft
movements.
Fax
Product Range
Tolerances
Lifetime calculation, CAD files and much more support www.igus.co.uk/en/igubal 51.3
igubal® KA..M | Rod End Bearings | mm
Data in mm
KA..M
Dimension
Metric
Thread
L = L.-hand thread
R = R.-hand thread
Housing
mm
(male thread)
Material
Housing: igumid G
Maintenance-free, self-lubricating High vibration dampening capacity Page 70.6
- 221603
- 221603
High strength under impact loads Suitable for rotating, oscillating, and Spherical Bearing:
Very high tensile strength for varying linear movements iglidur® W300
+49 (0)
+49 (0)
chapter 5
loads Light weight
Phone +44
+44
Load Data
igus® GmbH
igus® UK Ltd
Part Number Max. static Max. Min. Max. torque Max. torque
tensile strength radial load thread strength through ball
Short term Long term Short term Long term depth outside Thread Standard MH
R.-hand thread L.-hand thread [N] [N] [N] [N] [mm] [Nm] [Nm] [Nm]
51.8 Lifetime calculation, CAD files and much more support www.igus.de/en/karm
www.igus.co.uk/en/karm
igubal® KA..M | Rod End Bearings | mm
B
KA..M
d2 C1
mm
h
l1
6749-145
6749-334
72 40
72 45
d3
04- -96
04- -96
- 221603
- 221603
+49 (0)
+49 (0)
Phone +44
Fax +44
Dimensions [mm]
igubal® – Rod End Bearings KARM / KALM
Rod end bearings can be ordered in metric dimensions with metal insert with the addition of MH after the part
numbers listed here, for example: KBRM-10 MH.
Available for delivery