Professional Documents
Culture Documents
Power Electronics Electrical Machines Drive Technology
Power Electronics Electrical Machines Drive Technology
Power Electronics Electrical Machines Drive Technology
Technology
Equipment and systems for vocational qualifications and engineering education on the following topics:
UniTrain-I multimedia courses on electrical machines encompass the entire spectrum of electrical machines.
The motors are characterised by their open, accessible stators. These are built onto experiment cards and thus
allow a detailed view of the internal design of electrical machines. In addition, the open design makes it possible
to exchange rotors quickly and without tools.
Students taking the course are familiarised with the physical principles, the operation, properties and basic
circuitry for various machines. In many experiments the machines are put into operation and their electrical
properties measured using multimeters and oscilloscope, control units are set up and the safe usage of
electrical machines is reinforced.
A host of multimedia courses are available for the UniTrain-I system in the areas of electrical engineering and
electronics. Each of the courses consists of the training program, specific circuitry on one or more experiment
cards and a browser (LabSoft) for the control, management and display of the training course. UniTrain-I courses
convey practical skills by providing a theoretical basis then guiding students through numerous experimental
measurements. Experiment cards are linked to the Interface and the training program via Experimenters. With
the help of virtual instruments and power sources included with the system, circuits can be analysed and results
of measurements stored directly within the training program.
Hardware
Experiment cards with specific circuits and components allowing the measurements in the course to be
made as well as permitting unguided experimentation.
Modifiable, open experiment set-up on experiment cards allow experiments to be started quickly
Systematic fault simulation, faults can be switched on and off by relays via the UniTrain-I bus
Software
Interactive, HTML-based multimedia courses to provide theoretical knowledge and practical skills
LabSoft: browser with menu, navigation and display windows for display and conduct of all UniTrain-I
courses
Virtual instruments (VIs) are made available for real-time measurement or for generating output signals.
Optional integration of circuit simulator, course editor, etc. into the menu structure.
Additionally required:
Additionally recommended
The machines used for training in electrical engineering are designed so that nearly all of the circuitry and drives
found in industry, commerce and at home can be conveyed in a didactic fashion in hands-on training. Using the
servo drive and braking system it is possible to easily determine all of the relevant data for electrical machines.
In spite of their declining use for industrial purposes DC machines constitute the basis for learning about
electrical machines. They demonstrate in a straight-forward manner the various possibilities of open- and closed-
loop control of machines.
The following training objectives are dealt with for shunt-wound, series-wound and compound-wound machines:
Motor operation:
Motor connection
Measurement evaluations
Generator operation:
Generator connection
Armature current and armature voltage at constant speed and constant exciter current
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
17 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Measuring instruments:
Accessories:
24 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
25 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
AC machines can be found with power levels of up to several kW. Their main area of use is in operating mobile
loads. AC machines span every area of daily life starting with your electric razor, all the way to washing
machines.
Motor connection
Typical characteristics
Measurement evaluations
Motor connection
Load characteristics
Measurement evaluations
Additionally required - Machine test bench equipment set for servo-drive/braking system:
37 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
44 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
45 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
EEM 3.3-3 Single-phase induction motor with bifilar starting winding 300W
Media:
57 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
Accessories:
64 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
65 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
Lucas Nülle GmbH Page 13/206 www.lucas-nuelle.com
66 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
EEM 3.4-3 Single-phase induction motor with operating and auxiliary capacitor 300W
EEM 3.4-3 Single-phase induction motor with operating and auxiliary capacitor 300W
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
77 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Measuring instruments:
Accessories:
84 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
85 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
Media:
97 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
Accessories:
104 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
106 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
107 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
110 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
111 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Asynchronous machines can be found with power levels ranging up into the MW range. Due to their simple
design asynchronous squirrel-cage machines are particularly widespread.
Motor connection
Manual switching
Measurement evaluation
EEM 4.1-3 Three-phase induction motor with squirrel cage and distinct pull-out torque
300W
Star-delta connection
Steinmetz circuit
Additionally required - Machine test bench equipment set for servo-drive/braking system:
119 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
126 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
127 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
128 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
129 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
132 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
133 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EEM 4.2-3 Three-phase induction motor with squirrel-cage, pole-changing according to Dahlander
300W
Media:
139 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
Accessories:
146 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
147 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
Lucas Nülle GmbH Page 25/206 www.lucas-nuelle.com
148 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
149 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
152 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
153 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EEM 4.3-3 Three-phase induction motor with squirrel cage, pole-changing with 2 separate windings
300W
Media:
159 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
Accessories:
166 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
167 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
Lucas Nülle GmbH Page 28/206 www.lucas-nuelle.com
168 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
169 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
172 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
173 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Starting
Speed control
Additionally required - Machine test bench equipment set for servo-drive/braking system:
180 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
187 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
188 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
189 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
190 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
193 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
194 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Additionally required - Machine test bench equipment set for servo-drive/braking system:
201 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
208 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
209 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
210 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
211 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
214 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
215 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Squirrel cage motors are designed for operation with constant loading. Any change in load, or high currents
when starting up, may cause the nominal operating temperature to be exceeded. This training system conveys
how some of the most important protection circuits work.
Thermistor protection
Media:
221 Manual EEM 4.6, Protection for electrical machines with servo- SH5002-1U 1
brake
Additionally required - Machine test bench equipment set for servo-drive/braking system:
222 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Accessories:
229 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
230 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
231 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
232 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
235 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
236 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EEM 5-3 Synchronous machines and mains synchronisation; reluctance machines 300W
Synchronous machines are primarily used as generators in power generation and as highly dynamic drives
(servos).
Motor operation:
Motor connection
Starting
V characteristics
Stability limits
Measurement evaluation
Generator operation:
Generator connection
Measurement evaluation
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
245 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
Accessories:
252 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
253 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
254 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
255 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
259 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Training objectives:
Mains synchronisation with double frequency meter, double voltage meter, synchronoscope and zero-
voltage meter
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
265 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Accessories:
272 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
273 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
274 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
275 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
278 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
279 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Experiment topics:
Machine connection
Starting
Load characteristics
Measurement evaluation
Additionally required - Machine test bench equipment set for servo-drive/braking system:
285 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
292 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
293 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
294 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
295 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
298 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
299 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
One of the world’s greatest challenges today and in the future is how to save energy. In the world of automation
there is scarcely a single area that is not powered by electrical drives. It is due to this prevalence and broad
application spectrum that this area constitutes such an effective lever in boosting energy efficiency.
Learning objectives:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
305 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
312 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
313 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
314 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
315 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
318 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
319 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Over 90% of a motor’s total costs are due to energy costs. The use of energy efficient motors allows us to spare
the environment and cut operating costs.
Training objectives:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
324 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
331 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
332 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
333 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
334 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
337 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
338 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
In almost any mechanical process the need for power varies. In these cases energy efficiency can be boosted to
a considerable degree thanks to frequency converters.
Training objectives:
***************Optional*******************
343 USB diagnostic adapter for Lenze 8400 frequency converter LM8929 1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
345 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
352 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
353 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
354 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
355 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
358 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
359 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
UniTrain-I multimedia courses in power electronics use numerous experiments and animations to explain the
design and function of various types of converters. Students taking the courses are familiarised with the various
types of power semiconductor devices and become familiar with the common circuits in which they are used.
Different types of circuits are used in a large number of experiments that deal with triggering, modulation and
instrumentation involving multimeters and oscilloscope as well as deriving the properties and capabilities of
converters.
A host of multimedia courses are available for the UniTrain-I system in the areas of electrical engineering and
electronics. Each of the courses consists of the training program, specific circuitry on one or more experiment
cards and a browser (LabSoft) for the control, management and display of the training course. UniTrain-I courses
convey practical skills by providing a theoretical basis then guiding students through numerous experimental
measurements. Experiment cards are linked to the Interface and the training program via Experimenters. With
the help of virtual instruments and power sources included with the system, circuits can be analysed and results
of measurements stored directly within the training program.
Hardware
Experiment cards with specific circuits and components allowing the measurements in the course to be
made as well as permitting unguided experimentation.
Modifiable, open experiment set-up on experiment cards allow experiments to be started quickly
Systematic fault simulation, faults can be switched on and off by relays via the UniTrain-I bus
Software
Interactive, HTML-based multimedia courses to provide theoretical knowledge and practical skills
LabSoft: browser with menu, navigation and display windows for display and conduct of all UniTrain-I
courses
Virtual instruments (VIs) are made available for real-time measurement or for generating output signals.
Optional integration of circuit simulator, course editor, etc. into the menu structure.
365 Course - Power electronics 4: Active power factor correction PFC SO4204-7Q 1
Additionally required:
Additionally recommended
Converters
Converters
Training objectives:
Rectification
Control principles: phase-control, full-wave control, burst firing control, pulse pattern control, rectifier
operation, inverter operation
Circuits: M1, M2, M3, B2, B6, M1C, M2C, M3C, B2C, B6C, B2HA, B2HK, B2HZ, B6C, B6HA, B6HK,
W1C, W3C
Suppressor circuit
Media:
Accessories:
376 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
377 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
378 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
379 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
382 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
383 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Experiment topics:
Fundamentals: IGBT
Control principles: pulse-width modulation, DC chopper controller in 1-, 2- and 4-quadrant operation
Media:
Accessories:
391 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
392 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
393 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
394 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
397 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
398 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Drives
Drives
Training objectives:
Closed-loop speed control in 1- to 4-quadrant operation with and without cascade current control
P-, PI-control
Media:
Measuring instruments:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
408 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
413 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
414 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
415 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
416 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
419 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
420 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EPE 41-3 Frequency converter drives with three-phase asynchronous motor 300W
Training objectives:
Supplementary equipment set for EPE 40-3 - Self-commutated converters, consisting of the
following:
Measuring instruments:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
426 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Accessories:
431 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
432 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
434 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
437 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
438 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Training objectives:
Supplementary equipment set for EPE 40-3 - Self-commutated converters, consisting of the
following:
Measuring instruments:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
447 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Accessories:
452 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
454 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
455 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
458 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
459 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Training objectives:
Closed-loop speed control in the 1 and 4 quadrant operation with and without cascade current control
Closed-loop speed control, closed-loop current control, cascade control, adaptive control
Controller optimisation
Supplementary equipment set for EPE 40-3 - Self-commutated converters, consisting of the
following:
Media:
Measuring instruments:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
468 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Accessories:
474 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
475 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
476 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
479 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
480 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Matlab enables rapid prototyping of embedded open-loop and closed-loop control systems. System designs can
first be investigated using a PC simulation. Then the next step is to apply the design to real hardware and test it.
This kind of simulation-based learning is motivating and interesting to students.
It enables drive systems, which are capable of operating in real time, to be programmed and tested using the
model-based design methods used in industry.
Training objectives:
Integration of the space phasor modulation to optimize the control of the IGBT
484 USB adapter with Matlab toolbox for power electronics CO3636-3D 1
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
492 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Accessories:
498 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
499 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
500 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
501 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
504 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
505 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EPE 52-3 Regulated permanent magnet servo drive with Matlab - Simulink 300W
Training objectives:
Integration of the space phasor modulation to optimize the control of the IGBT
509 USB adapter with Matlab toolbox for power electronics CO3636-3D 1
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
517 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Accessories:
523 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
524 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
525 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
526 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
529 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
530 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EPE 53-3 DC drives with cascade control using Matlab - Simulink 300W
Training objectives:
534 USB adapter with Matlab toolbox for power electronics CO3636-3D 1
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
543 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Measuring instruments:
549 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
550 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
551 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
552 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
555 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
556 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
The training system covers investigations into single-phase and three-phase transformers.
The following training content can be dealt with using this system:
Transformation ratios
Media:
Measuring instruments:
Accessories:
566 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 15
567 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
568 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
569 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
572 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
573 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Unlike didactically-modified drives, this training equipment incorporates industrial components. Thus the system
focuses on the handling and operating (setting parameters) of real industrial equipment. Using the servo
drive/braking system the response of the drives can be investigated dynamically and statically and using
different working machines. The equipment is designed in the form of training panels.
Setting the parameters of the run-up and run-down ramp functions and starting voltage
Additionally required - Machine test bench equipment set for servo-drive/braking system:
579 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
586 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
587 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
588 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
589 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
592 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
593 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Experiment topics:
Load experiments
Optional Accessories:
599 USB diagnostic adapter for Lenze 8400 frequency converter LM8929 1
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
604 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Accessories:
611 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
612 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
613 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
614 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
617 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
618 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
621 Frequency converter, industrial type 0.75kW 3-phase (Lenze 8400) CO3636-5J 1
Optional Accessories:
624 USB diagnostic adapter for Lenze 8400 frequency converter LM8929 1
626 PROFINET interface module for frequency converter Lenze 8400 LM8937 1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
629 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Accessories:
636 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
637 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
638 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
639 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
642 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
643 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Setting parameters of the position controller and speed controller using industrial-type parameter setting
software
646 Synchronous servo system with motor, resolver and software CO3636-6B 1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
649 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
656 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
657 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
658 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
659 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
662 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
663 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Training objectives:
Software:
667 Software PosiDrive for servo machine test stand V1.0 (D,GB) SO6001-2S 1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
669 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
676 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
677 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
678 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
679 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
682 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
683 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Training objectives:
Load experiments
688 Manual EDT51, Controlling motors with motor management relays SH5002-3R 1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
690 Servo machine test stand for 0.3kW machines incl. software CO3636-6V 1
ActiveServo (D,GB,F,E)
Power supply:
Measuring instruments:
697 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
698 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
699 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
700 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
703 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
704 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Electrical machines convert electrical energy into mechanical energy or viceversa. A fundamental distinction can
be drawn between DC, AC and three-phase machines.
The machines used for training in electrical engineering are designed so that nearly all of the circuitry and drives
found in industry, commerce and at home can be conveyed in a didactic fashion in hands-on training. Using the
servo drive and braking system it is possible to easily determine all of the relevant data for electrical machines.
In spite of their declining use for industrial purposes DC machines constitute the basis for learning about
electrical machines. They demonstrate in a straight-forward manner the various possibilities of open- and closed-
loop control of machines.
The following training objectives are dealt with for shunt-wound, series-wound and compound-wound machines:
Motor operation:
Motor connection
Measurement evaluations
Generator operation:
Generator connection
Armature current and armature voltage at constant speed and constant exciter current
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
713 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
Accessories:
720 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
721 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
722 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
724 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
727 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
728 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
AC machines can be found with power levels of up to several kW. Their main area of use is in operating mobile
loads. AC machines span every area of daily life starting with your electric razor, all the way to washing
machines.
Motor connection
Typical characteristics
Measurement evaluations
Media:
734 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
Accessories:
741 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
742 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
Lucas Nülle GmbH Page 119/206 www.lucas-nuelle.com
743 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
745 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
748 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
749 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EEM 3.3-1 Single-phase induction motor with bifilar starting winding 1kW
Media:
755 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
Accessories:
762 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
763 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
Lucas Nülle GmbH Page 122/206 www.lucas-nuelle.com
764 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
766 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
769 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
770 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EEM 3.4-1 Single-phase induction motor with operating and auxiliary capacitor 1kW
Media:
776 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
Accessories:
783 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
784 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
Lucas Nülle GmbH Page 125/206 www.lucas-nuelle.com
785 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
787 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
790 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
791 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Asynchronous machines can be found with power levels ranging up into the MW range. Due to their simple
design asynchronous squirrel-cage machines are particularly widespread.
Motor connection
Manual switching
Measurement evaluation
EEM 4.1-1 Three-phase induction motor with squirrel cage and distinct pull-out torque 1kW
Star-delta connection
Steinmetz circuit
Additionally required - Machine test bench equipment set for servo-drive/braking system:
799 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
806 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
807 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
808 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
810 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
813 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
814 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EEM 4.2-1 Three-phase induction motor with squirrel-cage, pole-changing according to Dahlander 1kW
Media:
820 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
Accessories:
827 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
828 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
Lucas Nülle GmbH Page 132/206 www.lucas-nuelle.com
829 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
831 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
834 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
835 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EEM 4.3-1 Three-phase induction motor with squirrel cage, pole-changing with 2 separate windings
1kW
Media:
841 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
Accessories:
848 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
849 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
Lucas Nülle GmbH Page 135/206 www.lucas-nuelle.com
850 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
852 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
855 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
856 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Starting
Speed control
Voltage, current and frequency in the rotor Rotor frequency and speed
Additionally required - Machine test bench equipment set for servo-drive/braking system:
863 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
870 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
871 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
872 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
874 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
877 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
878 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Additionally required - Machine test bench equipment set for servo-drive/braking system:
885 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
892 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
893 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
894 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
896 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
899 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
900 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
906 Manual EEM 4.6, Protection for electrical machines with servo- SH5002-1U 1
brake
Additionally required - Machine test bench equipment set for servo-drive/braking system:
907 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
914 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
915 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
916 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
918 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
921 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
922 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EEM 5-1 Synchronous machines and mains synchronisation; reluctance machines 1kW
Synchronous machines are primarily used as generators in power generation and as highly dynamic drives
(servos).
Training objectives:
Motor operation:
Generator operation:
Generator connection
Voltage setting via the exciter current
Load characteristics in generator operation
Measurement evaluation
Power supply:
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
931 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Measuring instruments:
Accessories:
938 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
939 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
940 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
942 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
945 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
Training objectives:
Mains synchronisation with double frequency meter, double voltage meter, synchronoscope and zero-
voltage meter
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
953 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Measuring instruments:
Accessories:
960 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
961 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
962 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
964 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
967 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
968 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Experiment topics:
Machine connection
Starting Reversing rotation direction
Load characteristics
Measurement evaluation
Additionally required - Machine test bench equipment set for servo-drive/braking system:
974 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
981 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
982 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
983 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
985 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
988 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
989 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Converters
Converters
Rectification
Control principles: phase-control, full-wave control, burst firing control, pulse pattern control, rectifier
operation, inverter operation
Circuits: M1, M2, M3, B2, B6, M1C, M2C, M3C, B2C, B6C, B2HA, B2HK, B2HZ, B6C, B6HA, B6HK,
W1C, W3C
Suppressor circuit
Media:
Accessories:
997 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
998 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
999 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
1000 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1003 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1004 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Experiment topics:
Fundamentals: IGBT
Control principles: pulse-width modulation, DC chopper controller in 1-, 2- and 4-quadrant operation
Media:
Accessories:
1012 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
1013 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1014 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
1015 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1018 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1019 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Drives
Drives
Training objectives:
Closed-loop speed control in 1- to 4-quadrant operation with and without cascade current control
Media:
Measuring instruments:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
1029 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
1034 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
1035 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1036 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
1037 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1040 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1041 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EPE 41-1 Frequency converter drives with three-phase asynchronous motor 1kW
Training objectives:
Supplementary equipment set for EPE 40-1 - Self-commutated converters, consisting of the
following:
Measuring instruments:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
1047 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Accessories:
1052 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
1053 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1055 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1058 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1059 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Training objectives:
Supplementary equipment set for EPE 40-1 - Self-commutated converters, consisting of the
following:
Measuring instruments:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
1068 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Accessories:
1073 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
1074 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1076 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1079 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1080 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Training objectives:
Closed-loop speed control in the 1 and 4 quadrant operation with and without cascade current control
Controller optimisation
Supplementary equipment set for EPE 40-1 - Self-commutated converters, consisting of the
following:
Media:
Measuring instruments:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
1089 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Accessories:
1095 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1096 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
1097 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1100 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1101 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Matlab enables rapid prototyping of embedded open-loop and closed-loop control systems. System designs can
first be investigated using a PC simulation. Then the next step is to apply the design to real hardware and test it.
This kind of simulation-based learning is motivating and interesting to students.
It enables drive systems, which are capable of operating in real time, to be programmed and tested using the
model-based design methods used in industry.
Training objectives:
EPE 51-1 Field-oriented control of asynchronous machine with Matlab - Simulink 1kW
Training objectives:
Integration of the space phasor modulation to optimize the control of the IGBT
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
1113 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Measuring instruments:
1119 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
1120 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1121 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
1122 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1125 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1126 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EPE 52-1 Regulated permanent magnet servo drive with Matlab - Simulink 1kW
Training objectives:
Integration of the space phasor modulation to optimize the control of the IGBT
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
1138 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Measuring instruments:
1144 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
1145 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1146 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
1147 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1150 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1151 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
EPE 53-1 DC drives with cascade control using Matlab - Simulink 1kW
Training objectives:
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
1164 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Measuring instruments:
1170 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
1171 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1172 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
1173 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1176 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1177 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Unlike didactically-modified drives, this training equipment incorporates industrial components. Thus the system
focuses on the handling and operating (setting parameters) of real industrial equipment. Using the servo
drive/braking system the response of the drives can be investigated dynamically and statically and using
different working machines. The equipment is designed in the form of training panels.
Experiment topics:
Setting the parameters of the run-up and run-down ramp functions and starting voltage
Additionally required - Machine test bench equipment set for servo-drive/braking system:
1184 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
1191 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
1192 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1193 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
1194 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1198 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1199 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Experiment topics:
Optional Accessories:
1204 USB diagnostic adapter for Lenze 8400 frequency converter LM8929 1
Media:
Additionally required - Machine test bench equipment set for servo-drive/braking system:
1209 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Accessories:
1216 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
1217 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1218 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
1219 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1223 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1224 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
1226 Frequency converter, industrial type 1.5kW 3-phase (Lenze 8400) CO3636-5L 1
Optional Accessories:
1229 USB diagnostic adapter for Lenze 8400 frequency converter LM8929 1
1231 PROFINET interface module for frequency converter Lenze 8400 LM8937 1
Media:
1234 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
Accessories:
1241 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
1242 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1244 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1248 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1249 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Training objectives:
Load experiments
1253 Manual EDT51, Controlling motors with motor management relays SH5002-3R 1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
1255 Servo machine test bench for 1kW machines incl. ActiveServo CO3636-6W 1
software(D,GB,F,E)
Power supply:
Measuring instruments:
1262 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 20
1263 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1264 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
1265 Mobile aluminium experiment stand, 3 levels, power strip with 6 ST7200-3A 1
sockets, 1250x700x1995mm
1269 PC holder for SybaPro experiment trolleys, height and width ST7200-5A 1
adjustable
1270 Monitor holder for flat screen monitor of weight up to 15kg,VESA ST8010-4T 1
75/100
Electrical machines and transformers are some of the most important components to be found in electrical
engineering and electronics and have to be manufactured and maintenanced in huge numbers all over the world.
The capacity for manufacturing such components is a basic prerequisite for their industrial production. The
practical training systems for the topic of "making windings in electrical machines " and "making windings in
transformers " use standard commercial materials and systematic instructions to convey and train the
necessary know-how and skills in project-oriented and skill-building exercises focused on how to work with the
raw materials and winding machines.
This training system takes a hands-on approach to teach how a three-phase transformer is constructed. It is
possible to put together a completely functional transformer, the response of which can be investigated with the
aid of a load.
Training objectives:
Making windings
1272 Construction kit for three-phase transformer with terminal plate SE2670-3S 1
Media:
Measuring instruments:
Accessories:
1279 Miniature winding machine with hand crank, including winding LM8525 1
templates
1283 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 15
1285 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
1286 SybaPro mobile lab trolley with plug board, 1250x700x760mm ST7200-3D 1
This training system takes a hands-on approach to teach how a three-phase motor with a squirrel-cage rotor is
constructed. It is possible to put together a completely functional motor, the response of which can be
investigated with the aid of a machine test stand.
Training objectives:
Making windings
1287 Construction kit for three-phase motor on iron core with nowinding SE2670-3H 1
1288 Material for "Three-phase motor windings" kit,to build 10 motors SE2670-5F 1
Media:
1289 Manual EMW 20, Assembly of a three-phase motor with squirrel SH5002-1X 1
cage rotor
Measuring instruments:
Accessories:
1293 Miniature winding machine with hand crank, including winding LM8525 1
templates
1297 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 15
1298 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 2
1299 Safety connecting plug 4mm with tap (2x), green/yellow, SO5126-3W 2
1000V/32A CAT II
1300 SybaPro mobile lab trolley with plug board, 1250x700x760mm ST7200-3D 1
The training system conveys in practical fashion how industrial components are built and wired in a control
cabinet. Using frequency converters and miniature control units, it is possible to assemble projects which are
typical of industrial installations, to set their parameters and to test them.
Training objectives:
Electromagnetically compatible assembly and wiring of a control cabinet with industrial components
Insulation measurement
Media:
1306 Manual EPL 25, Frequency converters project work kit SH5002-3U 1
Measuring instruments:
Accessories:
1311 SybaPro mobile lab trolley with plug board, 1250x700x760mm ST7200-3D 1