VISCOSITY
AUTOMATED VISCOMETER
MODEL 3530
v Easy to Set-Up, Operate, Clean &
Maintain
A Critical Tool for Completion, Cementing
and Drilling Fluids v Rheo 3000 Data Acquisition Software
“The Model 3530 is a fully automated concentric cylinder viscometer
designed to meet API and ISO requirements for viscosity
measurement of many of the fuids used in well servicing. This
viscometer i fully operational in manual mode without the use of
‘computer or as @ computer controlled viscometer with preconfigured
Periodie shear rate ramping. The Rheo 3000 Data Acquisition
‘Software is provided with the instrument ensuring consistent testing
Bingham Plastic and Herschel-
Bulkley Parameters,
v Remote Control of Motor System
{Step Changes, Linear Ramps,
Constant Speed)
parametors and resuts, v Automatic Calibration Capability
Meets API and ISO Standards for
Operational Cilfitd Cements and Completion
Simplicity Fluids
‘The Model $880 is an
automated viecometar Multiple Roto/Bob Combinations and
‘combined with the Spring Factors Available
powerful heo 3000
Data Acquistion ¥ Optional Thermal Cup
Software running on your
‘computer (The software
isan optionallaitiona
feature)
‘This combination provides
complete, programmable
Control of the viscometers
‘speed throughout a test cycle
including stop changes, Inoar
ramps and constant
‘speeds aslow as 0.01
rpm. Rheo 3000 also
provides automatic,
data acquisiton
‘graphical display and
analysis of test results,VISCOSITY DLER \METEK’
AUTOMATED VISCOMETER
MODEL 3530
SPECIFICATIONS
All test data is stored in a spreadsheet compatible file format for ease of data handling.
Temperature, Maximum Torque Accuracy Power Requirements
194°F / 90°C (with optional heat cup) 1=05 dial reading from 1 to 300 degrees 120 oF 240 Volts, 50/60 Hz, 700 W
Operating Speeds ‘Sample Volume Physical Dimensions (w x d x h)
16 manual speeds from 0.110 600 rpm 350m. 7xI2x182Zin. 8X IEX AGED
10.01 to 1000 rpm when computer Operating Conditions Weight
controlled TSF 19478 24°C. 90°C 47/21 ig,
‘Shear Rate Range" Compliance
0.17 to 1021 with supplied rotorbob and _—__System complies with API Spec, 10A and
spring ‘API RP 13M requirements
‘Shear Rate Accuracy (Cand CSA (NRTL) certiied
£20001 pm £00017 see-1
Manufacturers specifications subject to change without notice
**Several rotors, bbs, and springs available for higher and lower shear rate ranges
ita o ‘View more product information on our website
‘a WWW.CHANDLERENG.COM/PRODUCTS:
os nth ienod rn Be A OS SEN AS {Si antenna tn, I
{SAF METER ae AEE ema BIRO SEE ae eat + aT