Professional Documents
Culture Documents
EagleBurgmann PDGS EN
EagleBurgmann PDGS EN
PDGS
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means, 17.07 2015 © EagleBurgmann
however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any www.eagleburgmann.com
guarantee for a specific case. Subject to change.
Mechanical seals | Compressor seals | Gas-lubricated seals Page 2/4
Item Description
1 Seal face, stationary
2 Seat, rotating
3 Thrust ring
4 Spring
5 Shaft sleeve and seat retainer
6 Intermediate sleeve
7,8 Housing (size matched to installation
space)
9 Separation seal (CSR)
10 Labyrinth
11 Intermediate labyrinth
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means, 17.07 2015 © EagleBurgmann
however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any www.eagleburgmann.com
guarantee for a specific case. Subject to change.
Mechanical seals | Compressor seals | Gas-lubricated seals Page 3/4
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means, 17.07 2015 © EagleBurgmann
however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any www.eagleburgmann.com
guarantee for a specific case. Subject to change.
Mechanical seals | Compressor seals | Gas-lubricated seals Page 4/4
Product variants
PDGS Tandem seal PDGS Tandem seal with intermediate DGS Double seal
Application: where no N2 is available and labyrinth Application: where product leakage to the
minimal process gas leakage to the atmosphere Application: where product leakage to the atmosphere/flare is unacceptable or for low
is acceptable, e.g. gas pipeline compressors. atmosphere is unacceptable, e.g. H2, ethylene pressure applications. Seal gas leakage into
The seal on the bearing side is intended as a or propylene compressors. With this type of the product needs to be permitted (seal gas
safety seal. The tandem arrangement offers seal, the product pressure to be sealed is pressure p3 > p1). This is used when a neutral
particularly good operational safety. The reduced via the seal on the process side. The seal gas is available at the appropriate
process side and bearing side seals are able to entire process gas leakage is routed to the flare pressure. Typical applications can be found in
withstand the full pressure. In normal operation, via connection “B”. The bearing side seal is the chemical and petrochemical industries,
only the process side seal reduces the full pressurized with secondary seal gas (nitrogen) e.g. in HC gas compressors. A seal gas, e.g.
pressure. The space between the process side via connection “C”. The pressure of the nitrogen at a pressure higher than the product
and bearing side seals is routed to the flare via separation gas ensures the flow through the pressure, is supplied between the seals via
connection “B”. The pressure to be sealed on labyrinth to the flare/tapping point. connection “C”. Part of the seal gas leakage
the bearing side corresponds to the flare dissipates to the atmosphere side, while the
pressure. There is thus very little leakage to the A Primary seal gas supply other part goes to the product.
bearing side or to the vent. If the primary seal B Primary vent
fails, the secondary seal is activated as a back- C Secondary gas seal supply A Buffer gas supply
up and operates at primary seal conditions. C Seal gas supply
S Secondary vent
D Separation gas supply S Vent
A Primary seal gas supply D Separation gas supply
B Primary vent
S Secondary vent
D Separation gas supply
17.07 2015 © Phone +49 (8171) 23-0 All technical specifications are based on extensive tests and our many years of
EagleBurgmann Germany GmbH & Co. KG Fax +49 (8171) 23-1214 experience. The diversity of possible applications means, however, that they can
All technical specifications are based on extensive tests and our many years of experience. The diversity of possible applications means, 17.07 2015 © EagleBurgmann
Äußere Sauerlacher Straße 6-10 info@eagleburgmann.com serve only as guide values. We must be notified of the exact conditions of application
however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any www.eagleburgmann.com
82515 Wolfratshausen /Germany www.eagleburgmann.com before we can provide any guarantee for a specific case. Subject to change.
guarantee for a specific case. Subject to change.