The document provides instructions for setting the date and time on an IFM3510 watch. To set the date, pull the crown out to the first click and turn it clockwise until the correct date is displayed. To set the time, pull the crown out to the second click and turn it clockwise until the correct time is shown. When setting the seconds, the minute display will increase by 1 minute if the seconds are between 30-59 seconds.
The document provides instructions for setting the date and time on an IFM3510 watch. To set the date, pull the crown out to the first click and turn it clockwise until the correct date is displayed. To set the time, pull the crown out to the second click and turn it clockwise until the correct time is shown. When setting the seconds, the minute display will increase by 1 minute if the seconds are between 30-59 seconds.
The document provides instructions for setting the date and time on an IFM3510 watch. To set the date, pull the crown out to the first click and turn it clockwise until the correct date is displayed. To set the time, pull the crown out to the second click and turn it clockwise until the correct time is shown. When setting the seconds, the minute display will increase by 1 minute if the seconds are between 30-59 seconds.
1. Be sure to Alarm switch OFF and pull the crown to the 1st Click Position. Pull the crown to the 2nd Click Position and turn the crown clockwise to set the 2. Turn the crown clockwise to set the date. time. 3. After the date has been set, push the crown back to the normal position. 1. Second: lf the crown is pulled out to the 2nd Click Position, the second hand will instantaneously move to the O position. When the second hand stands at between * The date will be changed in the period from around 12:00 a.m. to around 3:30a.m. O and 29 seconds, the minute display will remain as befare. When the second hand stands at between 30 and 59 seconds, the minute display will increase by Pay attention since the date will not change when the setting of the alarm is checked 1 minute. and alarm time is set in this time zone.
* In case the second hand does
not move to the O position even if the crown is pulled out to the 2nd Click Position, set the second hand to the O position by pushing the button A with the crown pulling out to the 2nd Click position. (A push of the button A m oves the second hand by one second scale.)