Professional Documents
Culture Documents
DR +92......... 65,15 X 40
DR +92......... 65,15 X 40
DR +92......... 65,15 X 40
Store Designing
Construction
Interiors
www. r e t ailc o n su lt . p k Racks
Attention: 15’ x 40’
Client:
Location: 2023
Project: Mart | Self Service Store
Contacts: +92…….65
10/17/2023
Factory: Opposite Murad Hospital, G.T road, Gujranwala
Sales Office: Plot 152-153, F block Commercial, NPF O-9, Islamabad
Contact: +92-302-5438 224 +92-331-6402 637
Retail Store Consulting
Store Designing
Construction
Interiors
www. r e t ailc o n su lt . p k Racks
SPECIFICATIONS.
DISPLAY RACKS: MS HR uprights/columns, “U” Channel 1’’ for Wall Mounted Racks, “C” type (2.33”, 2.88’’, 3.33”)
for Wall Gondola Racks, “C” type (2.33”, 2.88’’, 3.33”) for Island Gondola racks and “C” type (2.33”,
2.88’’, 3.33”) for End Gondola racks profile 2 mm, Base brackets profile 1.5 mm, upper shelves
levers pitch 45 x 2 =90 mm profile 2 mm, MS base rectangle tube 25 x 70 mm, profile 1.2 mm,
Shelf single/ CRC/ GP/EG Profile 0.70 mm. Back panel top cover, Zincalume profile 0.42 mm. MS
components powder coated; oven cured.
Shelves single piece without rib 25 -30 Kg, shelves double piece or single piece with 1-rib capacity
50-60 kg approximately (evenly distributed).
Slotted Angle RACKS: MS HR powder coated columns slotted angle 1.5’’x 1.5’’ SWG 14, Shelf MS GP/EG SWG
21. corners 08 pcs, foot plates single 04 pcs, bolt .5” x 2.5’’’ 48 pcs, bolt .75’’ x 2.5’’’ 02
pcs, nut 2.5’’’ 50 pcs.
COLOUR. White
PAYMENT TERMS.
➢ Quoted itemized prices valid for 05 days, exclusive shelf talkers & Kick plates, loose
packing, exclusive fitting, exclusive all taxes, ex-factory.
➢ Delay in payments as per commitment will consequently result in delayed production
time.
➢ All taxes will be borne by the purchasing party in case of GST registered.
➢ Manufacturers reserve the right to be financially protected by the purchasing party in case
of change, reduction or cancellation of order which is not allowed otherwise.
➢ Store/Warehouse/Space planning/lay-out and quantities of racks are the customers’ sole
responsibility. The manufacturer will be responsible for the items, quantities described
and charged in the proposal/estimate/quotation only.