Professional Documents
Culture Documents
RWS-SR Belagavi 2019 - 20 (Combined) - Final Mail-1
RWS-SR Belagavi 2019 - 20 (Combined) - Final Mail-1
From To
CHAPTERS
1.0 Chapter No. 1 SITE CLEARANCE & DISMANTLING.......................................... 1 6
Annexures
................................................................................................... 339
PÀ£ÁðlPÀ ¸ÀPÁðgÀzÀ £ÀqÀĪÀ½UÀ¼ÀÄ
«µÀAiÀÄ :- 2019-20 £Éà ¸Á°£À UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å E¯ÁSÉ ¨ÉAUÀ¼ÀÆgÀÄ,
ªÉÄʸÀÆgÀÄ, ¨É¼ÀUÁ«, ªÀÄvÀÄÛ PÀ®§ÄgÀV ªÀÈvÀÛzÀ zÀgÀ¥ÀnÖUÉ C£ÀĪÉÆÃzÀ£É ¤ÃqÀĪÀ §UÉÎ.
G¯ÉèÃR 1) ¸ÀPÁðgÀzÀ ¥ÀæzsÁ£À PÁAiÀÄðzÀ²ðUÀ¼ÀÄ, UÁæ«ÄÃuÁ©üªÀÈ¢Þ ªÀÄvÀÄÛ ¥ÀAZÁAiÀÄvï gÁeï
gÀªÀgÀ n¥Ààt ¸ÀASÉå:UÁæC¥À/D±Á-PÀ¥ÀvÀæ/02/19/¢£ÁAPÀ:22/04/2019.
2) F PÀbÉÃj ¥ÀvÀæ ¸ÀASÉå:UÁæC¥À/331/UÁæPÀĤÃ&£ÉÊE/vÁA¸À-04/¸À.EA-3/2016-17
638/¢£ÁAPÀ:09/05/2019.
3) F PÀbÉÃj ¥ÀvÀæ ¸ÀASÉå:UÁæC¥À/331/UÁæPÀĤÃ&£ÉÊE/vÁA¸À-04/¸À.EA-3/2016-17
905/¢£ÁAPÀ:09/05/2019.
4) ¸ÀPÁðgÀzÀ DzÉñÀ ¸ÀASÉå:UÁæPÀĤÃ&£ÉÊE/27/UÁæ¤Ã¸À(4) 2019/ ¨ÉAUÀ¼ÀÆgÀÄ
¢£ÁAPÀ:02/05/2019.
5) DyðPÀ E¯ÁSÉ n¥Ààt ¸ÀASÉå:DE-215/DPÉÆÃ-2/2019/¢£ÁAPÀ:13/08/2019
6) ¢£ÁAPÀ:11/09/2019 gÀ ¸ÀPÁðgÀzÀ ¥ÀæzsÁ£À PÁAiÀÄðzÀ²ðUÀ¼ÀÄ CzsÀåPÀëvÉAiÀÄ°è £ÀqÉzÀ
zÀgÀ¥ÀnÖ ¸À¨sÉAiÀÄ £ÀqÀªÀ½UÀ¼ÀÄ.
UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å E¯ÁSÉAiÀÄÄ ¸ÀPÁðgÀzÀ DzÉñÀ ¥ÀvÀæ ¸ÀASÉå:UÁæC¥À/56/UÁæ¤Ã¸À/(2)
2013 ¢£ÁAPÀ:04/09/2014 gÀ£ÀéAiÀÄ UÁæ«ÄÃt C©üªÀÈ¢Þ ¥ÀAZÁAiÀÄvï gÁeï EAf¤ÃAiÀÄjAUï E¯ÁSɬÄAzÀ ¥ÀævÉåÃPÀUÉÆAqÀÄ
ºÉƸÀzÁV ¸ÀÈd£ÉAiÀiÁVgÀÀÄvÀÛzÉ.
UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤Ãj£À PÁªÀÄUÁjUÀ½UÉ ¥ÀAZÁAiÀÄvï gÁeï EAf¤ÃAiÀÄjAUÀ E¯ÁSÉAiÀÄ 8 ªÀÈvÀÛUÀ¼ÀÄ ¹zÀÝ¥Àr¹zÀÝ
zÀgÀ¥ÀnÖUÀ¼À£ÀÄß §¼À¸À¯ÁUÀÄwÛzÉ. F zÀgÀ¥ÀnÖUÀ¼ÀÄ 2012-13 £Éà ¸Á°£À°è C£ÀĪÉÆÃzÀ£ÉAiÀiÁVzÀÄÝ ¥ÀjµÀÌgÀuÉAiÀiÁVgÀĪÀÅ¢®è.
D zÀgÀ ¥ÀnÖUÀ¼À°è ºÀ®ªÁgÀÄ LlAUÀ¼ÀÄ E®è¢zÀÄÝ KUWS & DB & KPWD ºÁUÀÆ EvÀgÉ zÀgÀ¥ÀnÖUÀ½AzÀ zÀgÀUÀ¼À£ÀÄß
¥ÀqÉAiÀįÁUÀÄwÛzÉ. E¯ÁSÉAiÀÄÄ ¥ÀævÉåÃPÀUÉÆAqÀ £ÀAvÀgÀ ºÁUÀÆ F E¯ÁSɬÄAzÀ PÉÊUÉƼÀÄîªÀ UÁæ«ÄÃt PÀÄrAiÀÄĪÀ
¤ÃgÀÄ ¸ÀgÀ§gÁfUÉ ¸ÀA§A¢ü¹zÀ «²µÀÖ PÁªÀÄUÁjUÀ¼À£ÀÄß PÉÊUÉƼÀî®Ä, PÁªÀÄUÁjUÀ¼À CAzÁd£ÀÄß vÀAiÀiÁåj¸À®Ä E¯ÁSÉUÉ
¸ÀªÀÄ¥ÀðPÀªÁzÀ zÀgÀ¥ÀnÖ CªÀ±ÀåPÀªÁVgÀĪÀÅzÁV ¥ÀjUÀt¸À¯ÁVzÉ.
¸ÀzÀj zÀgÀ ¥ÀnÖAiÀÄ£ÀÄß vÀAiÀiÁåj¸ÀĪÀ ¸À®ÄªÁV UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å E¯ÁSÉAiÀÄ C¢üÃPÀëPÀ
EAf¤ÃAiÀÄgïgÀªÀgÀÄ CªÀgÀ ªÀÈvÀÛzÀ ªÁå¦ÛAiÀÄ M§â PÁAiÀÄð¥Á®PÀ C£ÀĪÉÆâ¹zÀ zÀgÀUÀ¼À£ÀÄß zÀgÀ¥ÀnÖAiÀÄ°è C¼ÀªÀr¸À¯ÁVgÀÄvÀÛzÉ.
F zÀgÀUÀ¼À£ÀÄß CAzÁdÄ ¥ÀnÖ vÀAiÀiÁåj¸À®Ä ªÀiÁvÀæ ¥ÀjUÀt¸À¯ÁVzÀÄÝ. F CA±ÀUÀ½UÉ mÉAqÀgï£ÀÄß CºÁ餸À¯ÁUÀĪÀÅzÀÄ. EzÉÃ
jÃwAiÀÄ ªÀiÁ£ÀzÀAqÀzÀAvÉ DAiÀiÁ ªÀÈvÀÛzÀ ««zsÀ gÉhÆãïUÀ½UÉ zÀgÀUÀ¼À£ÀÄß ¸ÀºÀ vÀAiÀiÁåj¹ £ÀªÀÄÆ¢¸À¯ÁVzÉ.
ºÉƸÀ zÀgÀ¥ÀnÖAiÀÄ vÀAiÀiÁåjPÉUÁV DVAzÁUÉÎ UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å E¯ÁSÉAiÀÄ ªÀÈvÀÛ PÀbÉÃjUÀ¼À
ªÁå¦ÛAiÀÄ°è ºÁUÀÆ PÉÃAzÀæ PÀbÉÃjAiÀÄ ªÁå¦ÛAiÀÄ°è ¸À¨sÉUÀ¼À£ÀÄß £ÀqɸÀ¯ÁVgÀÄvÀÛzÉ. ¸ÀzÀj «µÀAiÀĪÀ£ÀÄß ¢£ÁAPÀ:25/04/2019
gÀAzÀÄ ¥ÀæzsÁ£À PÁAiÀÄðzÀ²ðUÀ¼ÀÄ UÁæ«ÄÃuÁ©üªÀÈ¢Þ ªÀÄvÀÄÛ ¥ÀAZÁAiÀÄvï gÁeï E¯ÁSÉ EªÀgÀ CzsÀåPÉëvÉAiÀÄ°è dgÀÄVzÀ
¥Àj²Ã®£Á ¸À¨sÉAiÀÄ°è ZÀað¸À¯ÁVgÀÄvÀÛzÉ.
2019-20 £Éà ¸Á°£À UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å E¯ÁSÉAiÀÄ ªÀÈvÀÛUÀ¼À zÀgÀ¥ÀnÖAiÀÄ°è 15 CzsÁåAiÀÄUÀ½UÉ
C£ÀĪÀÅ ªÀiÁqÀ¯ÁVzÉ. CzsÁåAiÀÄ 13 gÀ°è PÉƼÀªÉ ¨Á«UÀ¼À£ÀÄß ¤«Äð¸À®Ä Cw vÀÄvÁðVzÀÝ »£É߯ÉAiÀÄ°è zÀgÀUÀ¼À£ÀÄß G¯ÉèÃR
¥ÀvÀæ (4) gÀ°è ¸ÀPÁðgÀ¢AzÀ C£ÀĪÉÆÃzÀ£É ¤ÃqÀ¯ÁVgÀÄvÀÛzÉ.
I
G¯ÉèÃR (5) gÀ°è DyðPÀ E¯ÁSÉAiÀĪÀgÀÄ ¯ÉÆÃPÉÆÃ¥ÀAiÉÆÃV ¸ÀA»vÉ ¥ÁågÀ 89 gÀAvÉ zÀgÀ¥ÀnÖAiÀÄ£ÀÄß C£ÀĪÉÆâ¸À®Ä
ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀªÀgÀÄ ¸ÀPÀëªÀĪÁVzÀÄÝ CzÀgÀAvÉ ¥Àj²Ã°¹ PÀæªÀÄ ªÀ»¸À®Ä ¸ÀÆa¹gÀÄvÁÛgÉ.
ªÀÄÄRå EAf¤ÃAiÀÄgï PÀbÉÃjAiÀÄ°è £ÀqÉzÀ ¸À¨sÉUÀ¼À°è ¤ÃrgÀĪÀ ²¥sÁgÀ¹ì£ÉÆA¢UÉ G½zÀ CzsÁåAiÀÄUÀ¼À£ÀÄß ¥ÀjUÀt¹,
¢£ÁAPÀ:11/09/2019. gÀAzÀÄ ¸ÀPÁðgÀzÀ ¥ÀæzsÁ£À PÁAiÀÄðzÀ²ðUÀ¼ÀÄ, UÁæ«ÄÃt©üªÀÈ¢Þ ªÀÄvÀÄÛ ¥ÀAZÁAiÀÄvï gÁeï E¯ÁSÉ EªÀgÀ
CzsÀåPÉëvÉAiÀÄ°è £ÀqÉzÀ ¸À¨sÉAiÀÄ°è 2019-20 £Éà ¸Á°£À zÀgÀ¥ÀnÖAiÀÄ £Á®ÄÌ ªÀÈvÀÛzÀ gÉhÆãï-J zÀgÀUÀ¼À PÀgÀqÀÄ ¥ÀæwAiÀÄ£ÀÄß
ªÀÄAr¹ ZÀað¸À¯ÁVgÀÄvÀÛzÉ. ¸À«ÄwAiÀÄ ¸ÀÄ¢ÃWÀðªÁV ZÀað¹ J®è «ªÀgÀUÀ¼À£ÀÄß ¥ÀjUÀt¹ AiÀiÁªÀÅzÉà zÀgÀUÀ¼À KUWS &
DB & KPWD E¯ÁSÉAiÀÄ zÀgÀ¥ÀnÖAiÀÄ zÀgÀUÀ½VAvÀ ºÉZÀÄÑ DVgÀĪÀÅ¢®èªÉA§ CA±ÀzÉÆA¢UÉ zÀgÀ¥ÀnÖUÀ¼À£ÀÄß M¥À৺ÀÄzÉAzÀÄ
wêÀiÁð¤¹vÀÄ.
¢£ÁAPÀ: 11/9/2019 gÀAzÀÄ ¸ÀPÁðgÀzÀ ªÀÄlÖzÀ°è £ÀqÉzÀ zÀgÀ¥ÀnÖ ¸À¨sÉAiÀÄ £ÀqÀªÀ½AiÀÄ°è 2019-20 £Éà ¸Á°£À UÁæ«ÄÃt
PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å E¯ÁSÉ, ¨ÉAUÀ¼ÀÆgÀÄ ªÉÄʸÀÆgÀÄ, ¨É¼ÀUÁ« ªÀÄvÀÄÛ PÀ®§ÄgÀV ªÀÈvÀÛUÀ¼À zÀgÀ¥ÀnÖUÀ½UÉ ªÀÄÄA¢£À
KPÀgÀÆ¥ÀzÀ zÀgÀ¥ÀnÖ C£ÀĪÉÆÃzÀ£É DUÀĪÀªÀgÉUÉ eÁjUÉ vÀgÀ®Ä ¸À«ÄwAiÀÄ ¢£ÁAPÀ: 13/9/2019 gÀAzÀÄ DzÉñÀ ¤ÃrgÀÄvÀÛzÉ.
¥Àæ¸ÀÄÛvÀ zÀgÀ¥ÀnÖAiÀÄ°è £Á®ÄÌ ªÀÈvÀÛzÀ gÉhÆãï-© CA±ÀªÀ£ÀÄß gÉhÆãï-J CA±ÀzÀAvÉ ¥Àj²Ã°¹ C¼ÀªÀr¸À¯ÁVgÀÄvÀÛzÉ; ¥Àæ¸ÀÄÛvÀ
zÀgÀ¥ÀnÖAiÀÄ°è Intake well, Jackwell CA±ÀPÉÌ AiÀÄAvÉÆæÃ¥ÀPÀgÀt¢AzÀ CUÉAiÀÄ®Ä C£ÀĪÀÅ ªÀiÁrzÉ.
DzÉñÀ
DzÉñÀ ¸ÀASÉå:UÁæC¥À/1212/UÁæ.PÀÄ.¤Ã&£ÉÊ/2016-17/¨ÉAUÀ¼ÀÆgÀÄ, ¢£ÁAPÀ: 21/9/2019
¦ÃpPÉAiÀÄ°è£À ªÁ¸ÀÛªÁA±ÀUÀ¼À »£À߯ÉAiÀÄ°è, 2019-20 £Éà ¸Á°£À UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å
E¯ÁSÉ ¨ÉAUÀ¼ÀÆgÀÄ, ªÉÄʸÀÆgÀÄ, ¨É¼ÀUÁ« ªÀÄvÀÄÛ PÀ®§ÄgÀV ªÀÈvÀÛUÀ¼À gÉhÆãï-J ªÀÄvÀÄÛ gÉhÆãï-© zÀgÀUÀ¼À zÀgÀ¥ÀnÖUÀ¼À£ÀÄß
¢£ÁAPÀ: 21/9/2019 jAzÀ eÁjUÉ §gÀĪÀAvÉ C£ÀĪÉÆâ¸À¯ÁVzÉ. ºÁUÀÆ F zÀgÀ¥ÀnÖAiÀÄÄ ªÀÄÄA¢£À KPÀgÀÆ¥ÀzÀ zÀgÀ¥ÀnÖAiÀÄ
©qÀÄUÀqÉ DUÀĪÀªÀgÉUÉ CxÀªÁ ªÀÄÄA¢£À DzÉñÀzÀªÀgÉUÉ eÁjAiÀÄ°ègÀÄvÀÛzÉ.
1. ¥ÀæzsÁ£À PÁAiÀÄðzÀ²ðUÀ¼ÀÄ, UÁæ«ÄÃuÁ©üªÀÈ¢Þ ªÀÄvÀÄÛ ¥ÀAZÁAiÀÄvï gÁeï E¯ÁSÉ, §ºÀĪÀĺÀr PÀlÖqÀ ¨ÉAUÀ¼ÀÆgÀÄ.
2. ¥ÀæzsÁ£À PÁAiÀÄðzÀ²ðUÀ¼ÀÄ, ¯ÉÆÃPÉÆÃ¥ÀAiÉÆÃV §AzÀgÀÄ ªÀÄvÀÄÛ M¼À£ÁqÀÄ d®¸ÁjUÉ E¯ÁSÉ, «PÁ¸À ¸ËzsÀ
¨ÉAUÀ¼ÀÆgÀÄ.
3. ªÀiÁ£Àå DAiÀÄÄPÀÛgÀÄ UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å E¯ÁSÉ, PÁªÉÃj ¨sÀªÀ£À ¨ÉAUÀ¼ÀÆgÀÄ.
4. ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å E¯ÁSÉ, PÁªÉÃj ¨sÀªÀ£À, ¨ÉAUÀ¼ÀÆgÀÄ.
5. ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, ¸ÀA¥ÀPÀð ªÀÄvÀÄÛ PÀlÖqÀ (GvÀÛgÀ ªÀ®AiÀÄ) zsÁgÀªÁqÀ.
II
6. ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, ¥ÀAZÁAiÀÄvï gÁeï EAf¤ÃAiÀÄjAUï E¯ÁSÉ, D£ÀAzÀgÁªï ¸ÀPÀð¯ï ¨ÉAUÀ¼ÀÆgÀÄ.
7. ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, d®¸ÀA¥À£ÀÆä® ¸ÀA¸ÉÜ, D£ÀAzÀgÁªï ¸ÀPÀð¯ï ¨ÉAUÀ¼ÀÆgÀÄ.
8. ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, PÀ£ÁðlPÀ £ÀUÀgÀ ¤ÃgÀÄ ¸ÀgÀ§gÁdÄ ªÀÄvÀÄÛ M¼ÀZÀgÀAr ªÀÄAqÀ½ zsÁgÀªÁqÀ.
9. ªÀĺÁ¯ÉÃR¥Á®PÀgÀÄ, PÀ£ÁðlPÀ ¨ÉAUÀ¼ÀÆgÀÄ 1 ªÀÄvÀÄÛ 2
10. Project Director, e-governance Department, e-procurement Cell, No-141, M.S. Building,
Bengaluru.
11. C¢üÃPÀëPÀ C©üAiÀÄAvÀgÀgÀÄ, ¯ÉÆÃPÉÆÃ¥ÀAiÉÆÃV §AzÀgÀÄ ªÀÄvÀÄÛ M¼À£ÁqÀÄ d®¸ÁjUÉ E¯ÁSÉ, ¨É¼ÀUÁ« / zsÁgÀªÁqÀ.
12. C¢üÃPÀëPÀ C©üAiÀÄAvÀgÀgÀÄ, ¥ÀAZÁAiÀÄvï gÁeï EAf¤ÃAiÀÄjAUï ªÀÈvÀÛ, ¨É¼ÀUÁ« ªÀÄvÀÄÛ zsÁgÀªÁqÀ.
13. C¢üÃPÀëPÀ C©üAiÀÄAvÀgÀgÀÄ, ¸ÀtÚ ¤ÃgÁªÀj ªÀÈvÀÛ, ¨É¼ÀUÁ«.
14. ªÀÄÄRå PÁAiÀÄð¤ªÁðºÀPÀ C¢üPÁjUÀ¼ÀÄ, f¯Áè ¥ÀAZÁAiÀÄvÀ ¨É¼ÀUÁ« / ¨ÁUÀ®PÉÆÃl / «dAiÀÄ¥ÀÄgÀ / UÀzÀUÀ /
zsÁgÀªÁqÀ / ºÁªÉÃj / GvÀÛgÀ PÀ£ÀßqÀ.
15. PÁAiÀÄð¤ªÁðºÀPÀ C©üAiÀÄAvÀgÀgÀÄ, UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å «¨sÁUÀ ¨É¼ÀUÁ« / aPÉÆÌÃr /
¨ÁUÀ®PÉÆÃl / «dAiÀÄ¥ÀÄgÀ / UÀzÀUÀ / zsÁgÀªÁqÀ / ºÁªÉÃj / PÁgÀªÁgÀ.
¸À»/-
(ªÀÄ£ÀäxÀAiÀiÁå JA ¸Áé«Ä)
C¢üÃPÀëPÀ C©üAiÀÄAvÀgÀgÀÄ
UÁææ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ
£ÉʪÀÄð®å ªÀÈvÀÛ ¨É¼ÀUÁ«.
III
PÀ£ÁðlPÀ ¸ÀPÁðgÀ
UÁææ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å E¯ÁSÉ
C¢üÃPÀëPÀ C©üAiÀÄAvÀgÀgÀ PÀZÉÃj, UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å ªÀÈvÀÛ,
qÁPÀ §AUÀ¯Á, ±ÀºÁ¥ÀÆgÀ, ¨É¼ÀUÁ« - 590 003
E-mail:se.rws.bgm@gmail.com, Phone. 0831-2420830, Fax No. 0831-2420831
«µÀAiÀÄ : 2019-20 £Éà ¸Á°£À UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ & £ÉʪÀÄð®å E¯ÁSÉAiÀÄ
¨É¼ÀUÁ« ªÀÈvÀÛzÀ zÀgÀ¥ÀnÖUÉ C£ÀĪÉÆÃzÀ£É ¤ÃqÀĪÀ §UÉÎ.
G¯ÉèÃR 1) DAiÀÄÄPÀÛgÀÄ, UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ & £ÉʪÀÄð®å E¯ÁSÉ ¨ÉAUÀ¼ÀÆgÀÄ, EªÀgÀ
¥ÀvÀæ ¸ÀA:UÁæC¥À/UÁæPÀĤÃ&£ÉÊE/2018 ¢£ÁAPÀ: 18.09.2018.
2) F PÀZÉÃj DzÉñÀ ¸ÀASÉå :C.C/UÁæPÀĤêÀÄ£ÉÊ/¨ÉªÀÈ/¸À.EA-2/zÀgÀ¥ÀnÖ ¸À«Äw/
2018-19/1106 ¢£ÁAPÀ: 24-09-2018.
3) ªÀÄÄRå EAf¤ÃAiÀÄgÀÄ,UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ & £ÉʪÀÄð®å E¯ÁSÉ
¨ÉAUÀ¼ÀÆgÀÄ, EªÀgÀ CgÉ ¸ÀPÁðj ¥ÀvÀæzÀ ¸ÀA: UÁæC¥À/1212/¢£ÁAPÀ: 23-11-2018.
4) ªÀÄÄRå EAf¤ÃAiÀÄgÀÄ,UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ & £ÉʪÀÄð®å E¯ÁSÉ
¨ÉAUÀ¼ÀÆgÀÄ EªÀgÀ ¸ÀÆZÀ£Á ¥ÀvÀæ :UÁæC¥À/1212/UÁæPÀĤÃ&£ÉÊE/2016-17/3425
¢£ÁAPÀ: 26-12-2018.
5) F PÀZÉÃj ¥ÀvÀæ¸À ¸ÀA: C.C/UÁæPÀĤêÀÄ£ÉÊ/ªÀȨÉ/zÀgÀ¥ÀnÖ/2019-20/3666
¢£ÁAPÀ: 18-02-2019.
6) ªÀÄÄRå EAf¤ÃAiÀÄgÀÄ,UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ & £ÉʪÀÄð®å E¯ÁSÉ ¨ÉAUÀ¼ÀÆgÀÄ
EªÀgÀ CzsÀåPÀëvÉAiÀÄ°è ¢£ÁAPÀ: 27-03-2019 gÀAzÀÄ dgÀÄVzÀ zÀgÀ¥ÀnÖ ¸À«Äw ¸À¨sÉAiÀÄ
£ÀqÀĪÀ½UÀ¼ÀÄ.
7) F PÀZÉÃj ¥ÀvÀæ ¸ÀA: C.C/UÁæPÀĤêÀÄ£ÉÊ/ªÀȨÉ/zÀgÀ¥ÀnÖ/2019-20/63
¢£ÁAPÀ: 20-04-2019.
8) ªÀÄÄRå EAf¤ÃAiÀÄgÀÄ, UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ & £ÉʪÀÄð®å E¯ÁSÉ ¨ÉAUÀ¼ÀÆgÀÄ,
EªÀgÀ n¥ÀàtÂ: UÁæC¥À/331/UÁæPÀĤÃ&£ÉÊE/2018-19/577 ¢£ÁAPÀ: 23-04-2019
9) ¸ÀPÁðgÀzÀ DzÉñÀ ¸ÀASÉå: UÁæPÀĤÃ&£ÉÊ E¯ÁSÉ /27/UÁæ¤Ã¸À(4) 2019 ¨ÉAUÀ¼ÀÆgÀÄ
¢£ÁAPÀ: 02-05-2019
10) ªÀÄÄRå EAf¤ÃAiÀÄgÀÄ, UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ & £ÉʪÀÄð®å E¯ÁSÉ ¨ÉAUÀ¼ÀÆgÀÄ,
EªÀgÀ ¥ÀvÀæzÀ ¸ÀA: UÁæC¥À/331/UÁæPÀĤÃ&£ÉÊ E¯ÁSÉ/vÁAwæPÀ-4/¸À.EA-3/2015-16/638
¢£ÁAPÀ: 09-05-2019.
11) ¸ÀPÁðgÀzÀ ¥ÀæzsÁ£À PÁAiÀÄðzÀ²ðUÀ¼ÀÄ, UÁæ«ÄÃuÁ©üªÀÈ¢Þ ªÀÄvÀÄÛ ¥ÀAZÁvÀAiÀÄ gÁeï
E¯ÁSÉ, ¨ÉAUÀ¼ÀÆgÀÄ EªÀgÀ CzsÀåPÀëvÉAiÀÄ°è ¢£ÁAPÀ: 11-09-2019 gÀAzÀÄ £ÀqÉzÀ
¸À¨sÉAiÀÄ £ÀqÀĪÀ½UÀ¼ÀÄ.
12) DzÉñÀ ¸ÀASÉå: UÁæC¥À/1212/UÁæPÀĤÃ&£ÉÊE/2016-17 ¨ÉAUÀ¼ÀÆgÀÄ
¢£ÁAPÀ: 21-09-2019
IV
¥Àæ¸ÁÛªÀ£É
G¯ÉèÃR (1)gÀ ¥ÀæPÁgÀ ªÀiÁ£Àå DAiÀÄÄPÀÛgÀÄ, UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ & £ÉʪÀÄð®å E¯ÁSÉ ¨ÉAUÀ¼ÀÆgÀÄ EªÀgÀ
DzÉñÀzÀAvÉ zÀgÀ¥ÀnÖ vÀAiÀiÁj¸ÀĪÀ ¸ÀA§AzsÀ G¯ÉèÃR (2)gÀr G¥À¸À«ÄwAiÀÄ£ÀÄß gÀa¸À¯ÁVgÀÄvÀÛzÉ.
G¯ÉèÃR (4)gÀr ªÀiÁ£Àå ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, UÁæ.PÀÄ.¤Ã&£ÉÊ E¯ÁSÉ EªÀgÀ CzsÀåPÀëvÉAiÀÄ°è J¯Áè C¢üPÁjUÀ¼À
¸À¨sÉAiÀÄ£ÀÄß £Àqɹ 2019-2020 £Éà ¸Á°£À zÀgÀ¥ÀnÖAiÀÄ£ÀÄß ¥ÀæPÀn¸ÀĪÀ §UÉÎ ZÀað¸À¯ÁVgÀÄvÀÛzÉ.
G¯ÉèÃR (5)gÀr ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, UÁæ.PÀÄ.¤Ã&£ÉÊ E¯ÁSÉ EªÀgÀ CzsÀåPÀëvÉAiÀÄ°è ¢£ÁAPÀ:27-03-2019
gÀAzÀÄ zÀgÀ¥ÀnÖ ¸À«Äw ¸À¨sÉAiÀÄ°è PÀgÀqÀÄ zÀgÀ¥ÀnÖUÉ ªÀiÁ¥ÀðqÀÄUÀ¼À£ÀÄß ¹zÀÝ¥Àr¹ zÀgÀ¥ÀnÖAiÀÄ ºÉÆ°PÉ zÀgÀUÀ¼À£ÀÄß ¸À°è¸À®Ä
¸ÀÆa¹gÀĪÀgÀÄ. CzÀgÀAvÉ G¯ÉèÃR (7) gÀr PÀgÀqÀÄ zÀgÀ¥ÀnÖAiÀÄ£ÀÄß vÀAiÀiÁj¹ C£ÀĪÉÆzÀ£ÉUÁV ¸À°è¸À¯ÁVgÀÄvÀÛzÉ.
G¯ÉèÃR (8) gÀ°è ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, UÁæ.PÀÄ.¤Ã&£ÉÊ E¯ÁSÉ ¨ÉAUÀ¼ÀÆgÀÄ EªÀgÀÄ ¸À¨sÉAiÀÄ°è ¸ÀÆa¹zÀ
wzÀÄÝ¥ÀrUÀ¼ÉÆA¢UÉ ¢£ÁAPÀ: 23-04-2019 gÀAzÀÄ 2019-20 £Éà ¸Á°£À Presentation ¤ÃqÀ®Ä ¸ÀÆa¹gÀĪÀgÀÄ. G¯ÉèÃR
(9)gÀ°è ¸ÀPÁðgÀzÀ DzÉñÀ ¸ÀASÉå: UÁæPÀĤÃ&£ÉÊ E¯ÁSÉ/27/UÁæ¤Ã¸À(4) 2019 ¨ÉAUÀ¼ÀÆgÀÄ ¢£ÁAPÀ:02-05-2019 gÀ£ÀéAiÀÄ
zÀgÀ¥ÀnÖAiÀÄ PÉƼÀªÉ ¨Á«UÀ¼À zÀgÀUÀ½UÉ ¸ÀA§A¢ü¹zÀAvÉ CzsÁåAiÀÄ-13 LlA ¸ÀASÉå: 13.01 jAzÀ 13.09gÀ zÀgÀUÀ½UÉ
C£ÀĪÉÆÃzÀ£É ¤ÃrgÀĪÀgÀÄ.
G¯ÉèÃR (7) gÀ°è ¸À°è¹zÀ zÀgÀ¥ÀnÖAiÀÄ zÀgÀUÀ¼À°è 18 LlAUÀ¼ÀÄ ªÀåvÁå¸À ºÉÆA¢gÀÄvÀÛªÉ JAzÀÄ G¯ÉèÃR (10)gÀ°è
ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, UÁæ.PÀÄ.¤Ã&£ÉÊ E¯ÁSÉ ¨ÉAUÀ¼ÀÆgÀÄ EªÀgÀÄ zÀgÀ¥ÀnÖAiÀÄ£ÀÄß ¥ÀjµÀÌj¸À®Ä ¸ÀÆa¹gÀĪÀgÀÄ.
G¯ÉèÃR (11)gÀ°è ¸ÀPÁðgÀzÀ ¥ÀæzsÁ£À PÁAiÀÄðzÀ²ðUÀ¼ÀÄ, UÁæ«ÄÃuÁ©üªÀÈ¢Þ ªÀÄvÀÄÛ ¥ÀAZÁvÀAiÀÄ gÁeï E¯ÁSÉ
EªÀgÀ CzsÀåPÀëvÉAiÀÄ°è £ÀqÉzÀ ¸À¨sÉAiÀÄ°è ¸ÀÆa¹zÀAvÉ 22 LlAUÀ¼À zÀgÀUÀ¼À£ÀÄß PÉ.AiÀÄÄ.qÀ§Æè.J¸ï. & r.© ªÀÄvÀÄÛ PÀ£ÁðlPÀ
¯ÉÆÃPÉÆÃ¥ÀAiÉÆÃV, §AzÀgÀÄ ªÀÄvÀÄÛ N¼À£ÁqÀÄ d®¸ÁjUÉ E¯ÁSÉAiÀÄ zÀgÀUÀ½UÉ ¸ÀªÀÄ£ÁV ¥ÀjµÀÌj¸À®Ä zÀgÀ¥ÀnÖAiÀÄ£ÀÄß
M¥À৺ÀÄzÉAzÀÄ wêÀiÁð¤¹vÀÄ. ªÀÄÄAzÀĪÀgÉzÀÄ DyðPÀ E¯ÁSÉAiÀÄ ¸ÀÆa¹zÀAvÉ gÁdåzÀ°è KPÀgÀÆ¥ÀzÀ zÀgÀ¥ÀnÖ
¹zÀݪÁUÀĪÀªÀgÉUÉ ZÁ°ÛAiÀÄ°èqÀ®Ä ¸ÀÆa¹zÀgÀÄ. G¯ÉèÃR (12) gÀ°è DzÉñÀ ¸ÀASÉå: UÁæC¥À/1212/UÁæPÀĤÃ&£ÉÊE/ 2016-
17 ¨ÉAUÀ¼ÀÆgÀÄ ¢£ÁAPÀ: 21-09-2019 gÀ£ÀéAiÀÄ ªÀiÁ£Àå ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ &
£ÉʪÀÄð®å E¯ÁSÉ ¨ÉAUÀ¼ÀÆgÀÄ EªÀgÀÄ 2019-20 £Éà ¸Á°£À ¨É¼ÀUÁ« ªÀÈvÀÛzÀ ZONE-A ªÀÄvÀÄÛ ZONE-B zÀgÀ¥ÀnÖAiÀÄ£ÀÄß
¢£ÁAPÀ: 21-09-2019 jAzÀ eÁjUÉ §gÀĪÀAvÉ C£ÀĪÉÆâ¸À¯ÁVzÉ ºÁUÀÆ zÀgÀ¥ÀnÖAiÀÄ ªÀÄÄA¢£À KPÀgÀÆ¥ÀzÀ zÀgÀ¥ÀnÖAiÀÄÄ
©qÀÄUÀqÉAiÀiÁUÀĪÀgÉUÉ CxÀªÁ ªÀÄÄA¢£À DzÉñÀzÀªÀgÉUÉ ZÁ°ÛAiÀÄ°ègÀÄvÀÛzÉ JAzÀÄ DzÉò¸À¯ÁVzÉ.
ªÉÄð£À J¯Áè G¯ÉèÃRUÀ¼À£ÀéAiÀÄ ²¥sÁgÀ¸ÀÄì ªÀÄvÀÄÛ wêÀiÁð£ÀzÀAvÉ/C£ÀĪÉÆÃzÀ£ÉAiÀÄAvÉ ªÀÈvÁÛªÁgÀÄ vÀAiÀiÁj¹zÀ
zÀgÀ¥ÀnÖ ¥ÀæPÀn¸À®Ä ¤zsÀðj¹ F PɼÀV£ÀAvÉ DzÉñÀ ºÉÆgÀr¸À¯ÁVgÀÄvÀÛzÉ.
-:DzÉñÀ:-
¸ÀA:CC/UÁæPÀĤÃ&£ÉÊ/ªÀȨÉ/2019-20/1024 ¢£ÁAPÀ: 23-09-2019
¥Àæ¸ÁÛªÀ£ÉAiÀÄ°è «ªÀj¹zÀ ªÉÄÃgÉUÉ G¯ÉèÃR (12)gÀ ¸ÀPÁðgÀzÀ DzÉñÀzÀ£ÀéAiÀÄ 2019-20 £Éà ¸Á°£À UÁæ«ÄÃt PÀÄrAiÀÄĪÀ
¤ÃgÀÄ & £ÉʪÀÄð®å E¯ÁSÉAiÀÄ ¨É¼ÀUÁ« ªÀÈvÀÛzÀ ZONE-A ªÀÄvÀÄÛ ZONE-B zÀgÀ¥ÀnÖAiÀÄ£ÀÄß ¢£ÁAPÀ: 21-09-2019 jAzÀ
eÁjUÉ §gÀĪÀAvÉ C£ÀĪÉÆâ¸À¯ÁVzÉ ºÁUÀÆ zÀgÀ¥ÀnÖAiÀÄ ªÀÄÄA¢£À KPÀgÀÆ¥ÀzÀ zÀgÀ¥ÀnÖAiÀÄ ©qÀÄUÀqÉAiÀiÁUÀĪÀgÉUÉ CxÀªÁ
ªÀÄÄA¢£À DzÉñÀzÀªÀgÉUÉ eÁjAiÀÄ°ègÀÄvÀÛzÉ.
¸À»/-
(ªÀÄ£ÀäxÀAiÀiÁå JA ¸Áé«Ä)
C¢üÃPÀëPÀ C©üAiÀÄAvÀgÀgÀÄ
UÁææ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ
£ÉʪÀÄð®å ªÀÈvÀÛ ¨É¼ÀUÁ«.
V
¥ÀæwAiÀÄ£ÀÄß ªÀiÁ»wUÁV DzÀgÀ ¥ÀƪÀðPÀªÁV ¸À°è¹zÉ.
1. DAiÀÄÄPÀÛgÀÄ ºÁUÀÆ ¸ÀPÁðgÀzÀ C¥ÀgÀ PÁAiÀÄðzÀ²ðUÀ¼ÀÄ, UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å E¯ÁSÉ,
¨ÉAUÀ¼ÀÆgÀÄ
2. ¸ÀPÁðgÀzÀ PÁAiÀÄðzÀ²ðUÀ¼ÀÄ, ¯ÉÆÃPÉÆÃ¥ÀAiÉÆÃV §AzÀgÀÄ ªÀÄvÀÄÛ M¼À£ÁqÀÄ d®¸ÁjUÉ E¯ÁSÉ, ¨ÉAUÀ¼ÀÆgÀÄ
3. ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å E¯ÁSÉ, ¨ÉAUÀ¼ÀÆgÀÄ
4. ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, ¥ÀAZÁAiÀÄvÀ gÁeï EAf¤ÃAiÀÄjAUï E¯ÁSÉ, ¨ÉAUÀ¼ÀÆgÀÄ
5. ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, ¸ÀA¥ÀPÀð ªÀÄvÀÄÛ PÀlÖqÀ(zÀ) ¨ÉAUÀ¼ÀÆgÀÄ.
6. ªÀÄÄRå EAf¤ÃAiÀÄgÀgÀÄ, ¸ÀA¥ÀPÀð ªÀÄvÀÄÛ PÀlÖqÀ(G) zsÁgÀªÁqÀ
7. CPËAlì d£ÀgÀ¯ï (CPËAlì) PÀ£ÁðlPÀ ¨ÉAUÀ¼ÀÆgÀÄ EªÀjUÉ.
¸À»/-
(ªÀÄ£ÀäxÀAiÀiÁå JA ¸Áé«Ä)
C¢üÃPÀëPÀ C©üAiÀÄAvÀgÀgÀÄ
UÁææ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ
£ÉʪÀÄð®å ªÀÈvÀÛ ¨É¼ÀUÁ«.
VI
GENERAL NOTE TO THE SR OF WATER SUPPLY WORKS
RDW&S CIRCLE BELAGAVI FOR THE YEAR 2019-20
1. The specification drawn in this SR for Water Supply and allied works are based on the recent
publication of IS codes.
2. The schedule of rates book along with detailed specifications furnished in the form of soft copy,
constitute complete SR
3. The material component rates indicated in the SR are the bare rates. (excluding GST but inclusive
of all other charges.)
The prevailing Market Rates of cement & steel will be assessed and the bare rates as approved
by the Superintending Engineer PWD circle Belagavi and Dharwad Shall be adopted
4. GST of 12% shall be added separately in the estimate as per Govt. Letter No. PWD/65/RDF/2017-
dtd. 11-10-2018.
5. The increase in GST shall not be paid in the extended period of contract for which the contractor
alone is responsible for delay as determined by the authority while granting the extension of time.
6. In the Tender Notification, a separate clause mentioning “GST shall be paid to the Tendered
Amount Separately” is to be published.
7. For ensuring quality aspects of the materials used by the contractors such as cement, steel,
bitumen, pipes, pumping machineries etc., it necessary that the contractor shall furnish the
approved quality control tests certificates for these materials including the finished items.
Department will have the right to get these materials tested at the cost of contractor.
8. Reinforcement shall be measured in length including hooks. The laps and wastages shall not be
measured and paid. Couplings, welded joints, spacer bars, annealed steel wire used for binding
shall not be measured as the cost of these items are deemed to have been included in the rates.
9. All the pipes, valves and specials shall confirm to relevant BIS specification.
10. The volume of reinforcement in RCC works need not be deducted from the measurement of
concrete quantity.
11. The use of filtered sand is totally banned in all items of civil works.
12. The rates for finished item of works indicated in the schedule of rates are inclusive of all lead, lift,
loading and unloading charges irrespective of mode/ type of lead involved. Extra lead, lift, loading
and unloading charges shall not be admissible.
VII
13. If the rates for certain items of works are not found in this SR then such items shall be obtained
from SR of any other GOVT. SR.
14. For items not found in any of the SR innovative items, data rates shall be prepared and got
approved from competent authority.
15. RMC: while using RMC, taking out the samples at work site is mandatory for conducting necessary
tests. It is the responsibility of the contractor to assure and ensure quality of RMC at the work
spot as per design mix for which Executive Engineer shall obtain necessary test certificates as
per IS standards.
16. The Design Mix shall be got certified from the competent authority by the user department.
17. The selection of mini water treatment plant shall be based on power supply duration & source
sustainability & water quality.
18. The guaranteed power consumption of electrical devices shall be ascertained before selection.
22. The brochure / manuals containing specifications of Appliances / Devices / Items / Components
shall be kept invariably in the sub divisions / Divisions for future references.
23. Replaced items (details of materials) shall be handed over to the user department & acknowledged.
24. The sand, carbon and filtrate & other consumables shall be checked and replaced.
The above rates are adopted excluding area weightage for preparation of estimate.
28. The rate for items which are same as in KPWD or KUWS & DB schedule of rates shall not be
more than respective rates of KPWD or KUWS.
VIII
29. Labour rates shall not be less than minimum wages as per the order from the labour department.
As and when labour department changes the rate, such rate shall be used from effective date
mentioned in that order.
30. The rates of the materials are as per KPWD schedule of rates which shall be modified as & when
KPWD modifies these rates.
31. The rates of the machinary are as per KPWD schedule of rates, which shall be modified as and
when. KPWD modifies their rates.
32. For adopting items 15.09 to 15.22 (For more than 1.50 MLD Capacity) prior approval of Cheif
Engineer is to be obtained.
Sd/-
Superintending Engineer
Rural Drinking Water & Sanitation
Circle, Belagavi
IX
Notes For Chapter 2: (Earthwork Excavation)
I. Ordinary soil:
This shall comprise of vegetation or organic soil, turf,sand,sandy soil, silt,loam,clay,mud, red earh, sudda,
peat, black cotton soil, soft shale or loose murrum,mud debris, a mixture of all these and similar materials
which yields to the ordinary application of pick axe, shovel, rake or other ordinary digging equipment,.
Removal of gravel or any other modular material having diameter in any one direction not exceeding 75
mm. Any other such occuring strata shall be deemed to be covered under this category.
IV Hard Rock
This shall Comprise:
i) Any rock or RCC excavation of which require the use of mechanical plant or blasting.
ii) Boulders requiring blasting.
iii) For Operating Items of Excavation in Hard Rock with Blasting and Hard Rock by Chistling Prior Permission
of the Superintending Engineer is to be Obtained.
X
V. Additional Notes
1. Earthwork excavation by manual means can be adopted only when it is not posible to carryout work by
mechanical means.The reasons for inability to carry out excavation by mechanical means resons shall be
stated in the report & certified by AEE
2. The Assistent Executive Engineer shall certify wherever, whenever specific changes in the above methods
of excavation is required, in such cases reports of Executive Engineer to be obtained
3. The measurement of Earthwork for pipe trenches shall be confined only to the excavation done below the
classification of the road crest.
4. While recording measurements for refilling item, pipe volume shall not be deducted as the surplus earth
need to be disposed of including all lead and lifts.
5. Payment for excavation of pipe line trenches will be restricted to the dimensions shown either in the drawing
or estimate irrespective of whether the excavation is done in earth or rock. In case of variation in dimensions,
the dimensions given at the time of mark out will be final. Dimensions shall stricty confirm to IS No 3114 of
IS 1965 or latest amendments.
6. In case of excavation for trenches in hard rock by blasting and hard laterite rock containing iron Ore the
quantity of rock removed will have to be stacked and shall be checked with the actual section measurement
and the lesser of the two will be paid for duly deducting 40% for voids in the stack measurements.The
Executive Engineer should certify the classification of hard laterite rock with test report from reputed
institutions.
7. Shoring and strutting will be provided upto a depth of 2 mtr beyond with which depending upon the nature
of the soil, steps will be provided at every lift of 2 mtr including shoring and strutting the steps width shall
vary from 0.30 mtr to 0.45 mtr depending upon the nature of the strata on either side of trenches.
9. In the special circumstances where earthwork excavation has to be done in hard rock by chistelling in
residentail areas where blasting is prohibited, the sectional measurement for chistelling shall be cent
percent check measured by the Executive Engineer Random checking shall be done by the Chief Engineer
during the course of inspection of work. The Executive Engineer shall however make an advance report to
The Superintending Engineer whenever such items is to be taken up for execution.
10. When the overnight recuperation exceeds one meter depth, rate analyis may be worked out based on
actual observation and got approved by the Superintending Engineer.
11. When earthwork excavation has to be done in hard laterite rock containing above 20% Iron or by chistelling
the sectional mesurement shall be cent percent check measured by confirmd Executive Engineer. random
checking shall be done by the Superintending Engineer in respect of this item during the inspection of
works. The Executive Engineer shall be have to make an advance report to the Superintending Engineer,
When such chistelling work is to be done or taken up for execution with necessary soil test report from
reputed instiutions / Geologiste
XI
12. When earthwork excavation has to be done in hard rock by controlled blasting, the sectional measurements
for controlled blasting shall be cent percent check measured by the concencered Executive Engineer.If by
Superintending Engineer respect of this item, during the inspection of works.The Executive Engineer shall
have to make an advance report to the Superintending Engineer, when such controlled blasting work is to
be done or is taken up for execution.
13. Extra for excavation under watery conditions / or foul conditions including bailing / pumping out, removing
slush add 20% of the rate to the respective rates on account of slow progress of work under these conditions.
14. For all repair works of water supply pipeline 50% over the normal rates are applicable excluding cost of
material rates.
Sd/-
Superintending Engineer,
RDW &S Circle Belagavi
XII
Notes for Chapter-13 Bore Well
1. The rates for various items of works given in this chapter are based on average rates. The market rates may
vary from place to place in the state depending upon the local conditions.
2. Tube wells drilled shall be perfectly vertical. The rates for drilling are inclusive of the verticality test required
to be conducted. All the relevant Indian standards specifications of the B.I.S. shall also be applicable.
3. The rates for drilling provided are inclusive of depreciation charges of all the machinery, tools & plants
required for drilling operation, transportation of drilling machine, erection of machine at site, removal of
machine from site after completion, cost of water, cost of drilling mud, fuel, labour and all other unforeseen
items for drilling work and clearance of site after completion of work.
4. For locating the proper site for tube well construction within the selected habitation, if resistivity survey is
required then the resistivity survey shall be carried out by a well qualified and experienced geo hydrologist
using his own suitable resistivity meter.
5. In the ordinary tube wells the casing pipe of specified diameter shall be lowered up to a minimum depth of
9 meters below ground level. If the collapsible strata in overburden continues beyond 9 meters depth then
the casing pipe hall be lowered up to rock level and embedded in rock to a depth of 0.15 meter. The casing
pipe shall also be extended above ground level to a height of about 0.3 meter.
6. The rates for drilling work are inclusive of the collection of samples of soil/rock cuttings not less than 250
grams from different strata to be collected at every 3 meter depth for initial 15 meters depth and at each 6
meters depth after 15 meter and at the change of strata also and depositing the same with the Engineer in
charge, duly marked and packed in bags.
7. The rates are inclusive of the preparation and submission of strata chart of the tube well constructed in the
pro forma/Format.
8. It shall be the responsibility of the contractor to collect the water sample from completed tube well and
send it to departmental laboratory for chemical and bacteriological analysis. The water sample for chemical
analysis shall be collected in 2 liters plastic bottle and samples for bacteriological analysis shall be collected
in 300 ml sterilized bottle as per the direction of Engineer in charge.
9. All risks of accidents and Jamming and breaking of drilling tools etc. shall be contractor's liability. No extra
charges shall be payable to the contractor on this account.
10. Contractor shall also make arrangements of first aid facilities for any accident .All care and precautions
shall be taken and it shall be ensured that there shall be no accidents while drilling the borehole. Proper
precautions & Safety measures shall be taken for workmen at site.
11. During any operation carried out for construction of tube well, if any tool, pipe etc. falls down in the tube well
then the contractor shall carry out the necessary fishing operation at his own cost. The contractor shall use
his own ipment for such operation.
12. The Engineer's incharge & Geologist can take proper decision incase failed borewells or borewell with less
yield to use as recharge shaft at later stage.in such cases the casing shall be retained.The tube shall be
fitted Imeediately the tube well shall be fitted with MS cap securely and a concrete block of 0.45m X 0.45m
X 0.45m with M15 cement concrete would be constructed on it to prevent any accident or damage to the
tube well and also to use the bore at any later stage for recharging or for any other purpose.The Engineer
incharge of work and Geologist shall take proper decision to retain or removal of casing pipe.
13. The Lowering and fixing of casing pipe in ordinary tube well and lowering of casing assembly shall be done
in the presence of authorised representative of the Engineer in Charge of work. The casing pipe to be
lowered and fixed in8 intertrappean formation shall be jointed by welding only.
14. In case of ordinary tubewells (other than gravel packed tubewells) where power pump is to be installed,
the yield test of tube well shall be conducted by suitable capacity single phase or three phase submersible
pumping set to be operated by generator set or by taking temporary electric connection at site. It shall be
XIII
the responsibility of the contractor to arrange for suitable capacity submersible pumping set, generator
set, or temporary electrical connection, suitable measuring equipments for measuring the discharge and
draw down of the tube well. The rates for item of yield test given in this schedule of rates include all such
arrangements. The maximum duration of yield test shall be ten hours.
15. The tube well shall be disinfected after completion of yield test using bleaching powder solution as per the
direction of Engineer in charge.
16. The installation of hand pump over the tube well shall be carried out as per IS specifications (IS15500
PART 1 to 8– 2004). All the parts of pump coming in contact with the water shall be thoroughly cleaned and
usted with bleaching powder. The hand pump after installation shall be tested for its proper installation by
operating it continuously at least for four hour and measuring the rate of discharge from hand pump. The
rates for the item of installation of hand pump and yield test by hand pump.
17. If the tube well is found dry or abondoned due to any reason. The contractor shall be fully responsible to fill
up the abandoned bore hole with hard soil including compaction and watering so as to make top surface
as good as original soil immediately and before shifting the drilling machine to prevent any accident. No
payment would be made to the contractor on account of this.
18. In the case of gravel packed tube well it shall be ensured by the contractor that the slotted pipes or
screened pipes shall be lowered in the tube well at the locations of water bearing aquifers as per design.
The contractor shall also ensure that joints of the pipes in casing assembly are rigid and water tight and a
bail plug is properly fixed in the bottom of casing assembly.
19. The following Indian standard shall be referred to:-
(1) I.S.2800 (Part-I) :1991 (Reaffirmed 2001)- Code of practice for construction & testing of tube wells/Bore
wells.
(2) I.S. 2800(Part-II):1979 (Reaffirmed 1999)- Code of practice for construction & testing of tube wells/Bore
wells.
(3) I.S. 11189-1985(Reaffirmed 1999): Methods of tube well development.
(4) I.S.1239 (Part-I) 1990 Mild steel tubes, tubular & other wrought steel fittings-specifications.
(5) I.S. 12818: 1992 Un plasticized PVC screen and casing pipes for bore/tube well-specification.
Sd/-
Superintending Engineer
Rural Drinking Water & Sanitation
Circle, Belagavi
XIV
Classification of Zones (WEIGHTAGES)
Sl.No Zones Zone-I Zone-II Zone-III Zone-IV Zone-V
1 Zone-A Basic rate State border area Major Irrigation Forest area --
(Belagavi, (10Kms from the area
Bagalkot, border) Sugar factory
Vijayapur) area (Area within 16
Kms from major Sugar
factories)
Percentage proposed for 5% 5% 5%
SR 2019-20
2 Zone-B 1) Mining area upto 5 1) Major Irrigation 1) Malenadu Forest Area
(Dharwad, Basic rate Km radius of mining command area area 1) Part work & Sea
Gadag, area 2) Sugar Factory 2) State Border Dharwad, erection works
Haveri, Uttar area 3) Due to area Kalaghatgi, 2) Coastal, Ghat
Kannada) non- availability of 3) Hubli Dharwad Shiggaon, section and Forest
material places Mahanagar palike Savanur, area Karwar,
1. Gadag 2. Mundargi, and other District Hanagal, Bhatkal, Ankola,
XV
3. Shirahatti, 4. Ron, head quarters. Byadagi, Kumta, Honnavar,
5. Haveri, 6. Rane- (upto 10 Km Hirekerur Sirsi, Siddapur,
bennur, 7. Hubli, radius) Haliyal, Joida,
8.Kundgol in these Mundgod, Yallapur
talukas.
Percentage proposed for 3% 4% 8% 15%
SR 2019-20
Jurisdiction of Zone A Districts : Bagalkot, Belagavi, Vijayapura (Map enclosed)
Jurisdiction of Zone B Districts : Dharwad, Gadag, Haveri, Uttara Kannada (Map enclosed)
Note: 1) Only one weightage is applicable for each Work. If two weightages of applicable whichever is heigher is to
be considered
2) Area weightage is applicable to the full rate of the item
Sd/-
Superintending Engineer
Rural Drinking Water & Sanitation
Circle, Belagavi
XVI
UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å ªÀÈvÀÛ ¨É¼ÀUÁ«
PÁAiÀÄðªÁå¦ÛAiÀÄ £ÀPÉë
GvÀÛgÀ
Qà £ÀPÉë
§¼Áîj f¯É è
²ªÀªÉÆUÀÎ f¯Éè
XVII
UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å ªÀÈvÀÛ ¨É¼ÀUÁ«
PÁAiÀÄðªÁå¦ÛAiÀÄ £ÀPÉë
GvÀÛgÀ
ZONE - A
XVIII
UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å ªÀÈvÀÛ ¨É¼ÀUÁ«
PÁAiÀÄðªÁå¦ÛAiÀÄ £ÀPÉë
GvÀÛgÀ
UÉ ÆêÁ gÁdå
²ªÀªÉÆUÀÎ f¯Éè
ZONE -B
XIX
XX
MATERIAL RATES FOR PREPARATION OF 2019-20 SOR
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
1 0009 Adhesive(for linoiling flooring) Kg 177.97 177.97
2 0509 Adhesive for tiles Kg 25.42 25.42
3 0514 Adhesive for joints Kg 63.56 63.53
4 0022 Bees Wax Kg 152.54 152.54
5 0513 High bond tile adhesive for vitrified tiles Kg 21.19 21.19
6 2008 Fevicol Kgs 190.68 190.68
7 2047 Ball Adhesives Kgs 199.15 199.15
8 0387 Shellac Kgs 230.00 230.00
9 0054 Brick bats 25 to 100 mm Cum 593.22 593.22
10 0055 Brick aggregate 20 mm(Nominal) Cum 593.22 593.22
11 0056 Brick aggregate 25 mm(Nominal) Cum 593.22 593.22
Burnt brick class designation 35 ( Non
12 0064 100 Nos. 562.00 582.00
Modular) Ground Moulded
13 0503 Burnt brick class designation 35 (modular) 100 Nos. 594.00 590.00
Table moulded bricks class designation 50
14 0488 100 Nos. 681.00 693.00
(non modular)
15 0504 Table moulded class designation 50 (modular) 100 Nos. 693.00 736.00
Wire cut bricks of class designation
16 0505 100 Nos. 1056.00 1039.00
75 (non modular)
Wire cut bricks of class designation
17 0506 100 Nos. 1067.00 1100.00
75 ( modular)
Pre-cast hollow blocks (40x20x20cms)
18 0311 100 Nos. 3644.07 3644.07
grade 30
19 0391 Solid blocks (concrete 40x20x20cms) 100 Nos. 3559.32 3559.32
20 0501 Pre-cast hollow blocks (40x10x20cms) 100 Nos. 0.00 0.00
21 0502 Pre-cast solid block (40x10x20cms) 100 Nos. 0.00 0.00
Hollow concrete blocks (40x20x20cms)
22 0497 100 Nos. 3644.00 3644.07
3.5 N/Sqmm
Hollow concrete blocks (40x20x15cms)
23 0498 100 Nos. 3474.00 3474.58
3.5 N/Sqmm
Hollow concrete blocks (40x20x10cms)
24 0499 100 Nos. 3389.00 3389.83
3.5 N/Sqmm
25 0175 100 mm and down nominal size Cum 727.00 700.00
XXI
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
26 0734 53 mm nominal size Cum 1128.00 1156.00
27 0750 40 mm nominal size Cum 1182.00 1211.00
28 0060 30 mm nominal size Cum 1162.00 1186.00
29 0800 25 mm nominal size Cum 1153.00 1218.00
30 0749 20 mm nominal size Cum 1220.00 1450.00
31 0058 12.5 mm nominal size Cum 1214.00 1420.00
32 0057 10 mm nominal size Cum 1216.00 1420.00
33 0707 6 mm nominal size Cum 1140.00 1234.00
34 0803 Fine aggregate 2.36 mm nominal size Cum 940.00 1234.00
35 0762 Key aggregates 22.4 to 2.8 mm Cum 1220.00 860.00
36 0746 Filter media stone aggregate Cum 1054.29 1054.29
37 0904 Coarse aggregates 53 mm Cum 1128.00 1156.00
38 0906 Crushed aggregates 37.5mm Cum 1182.00 1198.00
Crushed coarse aggregate (Supply of hand
39 0912 Cum 727.00 733.00
broken aggregates)
40 0919 Key aggregates passing 26.5mm to 2.8mm Cum 1220.00 880.00
41 0921 Crushed stone aggregate 13.2mm to 10mm Cum 1216.00 880.00
42 0922 Crushed stone chipping, 19mm Cum 1220.00 880.00
43 0926 Crushed aggregate 9.5mm to 4.75mm Cum 1216.00 880.00
44 567 Filler Aggregates Tonne 1091.43 880.00
45 0732 Crushed stone chippings 11.2 mm Cum 1216.00 1420.00
46 0733 Crushed stone chippings 13.2 mm Cum 1214.00 1420.00
47 0400 Stone dust / Grit Cum 478.00 506.00
48 0815 Crushed stone chipping 5.6 mm size cum 1140.00 1200.00
49 0819 Lime Stone Dust Tonne 7695.05 7619.05
50 0287 Pea size gravel/6mm and down stone grit cum 478.00 428.00
51 0334 Sand/ Artificial Sand/ Manufactured Sand cum 1635.00 1700.00
52 0551 Ordinary earth cum 201.00 150.00
53 0731 Sand / Crushed Sand cum 1635.00 1700.00
54 0751 Granular material cum 285.00 386.00
55 0752 Gravel 2.36 mm cum 285.00 295.00
56 0772 Natural sand 5.6 to 75 micron cum 1635.00 1700.00
XXII
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
57 0781 Quartz sand Kgs 4.76 4.76
58 0039 Boulders Cum 666.67 666.67
59 0066 Burnt stone slabs 10cms thick Sqm 428.57 428.57
60 0174 Granite stone slabs fine dressed 40 mm thic Sqm 1440.68 1440.68
61 0330 Rubble stones Cum 409.52 409.52
62 0390 Size stone 20x20x25cm Each 14.00 11.86
63 0401 Stone slab 10 to 12 cm thick Sqm 571.43 571.43
64 0720 Bond stone 20x20x45 cm. Each 24.00 26.67
65 0780 Quarry spalls Cum 238.10 238.10
66 0790 Spall (jelly used for packing) Cum 476.19 476.19
67 0793 Rough stones 15 cm to 45 cm Cum 380.95 380.95
68 0794 Stone boulders 30 cm thick Cum 654.00 666.67
69 0795 Stone spalls Cum 333.33 333.33
70 0939 Stone with minimum size of 200mm Cum 666.67 666.67
71 0010 Aluminium beading Kgs 127.12 127.12
72 0011 Aluminium handles - 15mm Each 59.32 59.32
73 0012 Aluminium hinges 75 mm length Each 33.90 33.90
74 0013 Aluminium stays Each 38.14 38.14
75 0014 Aluminium tower bolt - 20 cm Each 76.27 76.27
76 0017 Aluminium sheet for strips Sqm 254.24 254.24
77 0018 Aluminium window frame section 1.2 mm thick Kgs 169.49 169.49
Aluminium Composite panel of approved
78 0522 Sqm 2796.61 2796.61
colour straight portion
79 0533 Aluminium frame section Kgs 194.92 194.92
80 0544 Aluminium composite panel of curved portion Sqm 3135.50 3135.50
Aluminium studs 100 x 100mm fitted with lense
81 0860 nos 211.80 211.86
reflectors
Aluminium sheeting fixed with encapsulated
82 0942 Sqm 1094.00 1094.00
lens type reflective sheeting of size 0.9sqm
Aluminium alloy/galvanised steel/ Galvanised
83 0943 Tonne 44915.25 44915.25
MS plate including 5% wastage
Aluminium alloy plate, 2mm thick, fixed with
84 0944 high intensity grade sheeting vide Clause Sqm 3220.34 3220.34
801.3
XXIII
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
85 2069 Alluminium anodised profile top cap beading m 338.98 338.98
86 0007 AC sheet 6 mm thick semi corrugated Sqm 144.07 144.07
87 0008 AC sheet 6 mm thick semi trafford Sqm 165.25 165.25
88 0327 Ridges (AC sheet) Pair 211.86 211.86
89 0717 Bitumen 80/100 Grade bulk Tonne 38118.00 37975.00
90 835 Bitumen 80/100 Packed Tonne 41318.00 41175.00
91 0814 Bitumen 60/70 Grade Bulk Tonne 38918.00 38775.00
92 836 Bitumen 60/70 Packed Tonne 42118.00 41975.00
93 0030 Bitumen 85/25 Grade Tonne 38440.00 38282.00
94 0820 Bitumen 30/40 Grade Tonne 39242.00 39275.00
95 0730 CRMB 55 Grade Tonne 39993.00 39850.00
96 0806 NRMB 70 Grade Tonne 51957.00 51957.46
97 0735 Cut back MC 70 Tonne 50406.78 50406.78
98 0718 Bitumen emulsion Tonne 39242.00 37539.00
99 0031 Bitumen felt (hessian based) Sqm 72.03 72.03
100 0032 Bitumen washer Each 0.85 0.85
101 0109 Coal tar Sqm 14.29 14.29
102 0108 Coal tar paint L 25.42 25.42
103 0035 Blown or residual bitumen Tonne 25506.80 25506.78
104 0807 Polymer MB 70 Tonne 51797.46 51797.46
105 0736 Detonator Each 8.470 8.470
106 0738 Drill bits Nos 317.80 317.80
107 0786 Safety fuse wire Coil 190.68 190.68
108 0791 Gelatin Kg 105.93 105.93
12 mm thick pre laminated board (Novapan)
109 0002 Sqm 550.85 550.85
exterior grade
Prelaminated board 19 mm thick of approved
110 0312 Sqm 593.22 593.22
lamination on both side
Prelaminated board of approved lamination on
111 0313 Sqm 567.80 567.80
one side and balancing white colour
112 0301.a a.Plywood 12 mm thick (Commercial) Sqm 762.71 762.71
113 0301.b b.Plywood 19 mm thick (Commercial) Sqm 889.83 889.83
XXIV
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
114 0301.c c.Plywood 25 mm thick (Commercial) Sqm 1483.05 1483.05
115 0301.d d.Sheet 6 mm thick (Commercial) Sqm 550.85 550.85
116 0293 Plain particle board Sqm 389.83 389.83
117 0180 Hard board 45 x 45 mm size Sqm 105.93 105.93
118 0181 Hard board 600 x 450 mm size Sqm 120.34 120.34
119 0955 Pre-moulded asphalt filler board Sqm 529.66 529.66
120 2006 12mm plywood Sqm 635.59 635.59
121 2007 4mm thick veneer Sqm 932.20 932.20
122 2009 19mm Plyboards Sqm 932.20 932.20
123 2010 1.5mm Laminate Sqm 677.97 677.97
124 2090 5mm PVC sheet Sqm 635.59 635.59
125 2099 5mm BS prelam PVC sheet Sqm 868.64 868.64
126 2100 5mm SS prelam PVC shee Sqm 741.53 741.53
127 2101 2mm PVC sheet Sqm 296.61 296.61
128 0084 Cement Qtl 470.00 500.00
129 0439 White cement Qtl 1562.50 1562.65
Portland Slag Cement (PSC)/ Portland
130 1557 Qtl 464.00 490.63
Pozzolona Cement (PPC)
131 1558 Ground Granulated blast furnace slag(GGBS) Qtl 333.33 333.33
132 0088 Chequered mosaic tiles grey Sqm 231.36 231.36
133 0089 Chequered mosaic tiles light shade Sqm 275.42 275.42
134 0090 Chequered mosaic tiles medium shade Sqm 254.24 254.24
135 0091 Chequered mosaic tiles white colour Sqm 320.34 320.34
136 0110 Cobble stone 60 mm thick Sqm 424.76 424.76
137 0111 Cobble stone 75 mm thick Sqm 469.52 469.52
138 0116 Cuddapah slab 2.5 cm to 4 cm thick Sqm 290.48 290.48
139 0176 Gray colour mosaic tiles Sqm 200.00 200.00
140 0213 Light shade mosaic tiles Sqm 205.08 205.08
141 0228 Machine cut granite stone slab 40 mm Sqm 822.88 822.88
142 0229 machine polished granite stone slab 20 mm Sqm 551.69 551.69
143 0231 marble chips Kgs 21.90 21.90
144 0234 Marble dust Cum 874.29 874.29
XXV
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
145 0235 marble powder Cum 740.00 740.00
146 0237 marble slab 20 mm thick Sqm 1099.15 1099.15
147 0248 metallic floor hardner Kgs 50.85 50.85
148 0386 shahabad slabs 2.5 cm to 4 cm thick Sqm 354.29 354.29
149 0448 white mosaic tiles Sqm 160.17 160.17
vitrified tiles 10 mm thick 600X600 mm
150 0507 Sqm 406.70 406.70
granolite finish
151 0508 vitrified tiles 600X600 mm 10 mm thick Sqm 381.36 381.36
152 0560 vitrified tiles 900mm x 900mm 12mm thick Sqm 440.68 440.68
153 0545 20 mm thick hassan green granite Sqm 1355.93 1355.93
154 0546 ceramic tiles 30X30 cms Sqm 296.61 296.61
155 0510 Grout for vitrified tiles Kgs 67.80 67.80
156 0511 Spacers for Vitrified tiles No 1.69 1.69
157 0512 Sealer for vetrified tiles Sqm 1.69 1.69
158 0515 Prepolished Grey granite 20 mm thick Sqm 1267.80 1267.80
159 0517 20 mm thick Ruby red granite Sqm 1623.73 1623.73
160 0518 20 mm thick grey granite Sqm 889.83 889.83
161 0519 20 mm thick Shiva gold granite Sqm 1889.83 1889.83
162 0520 20 mm thick Black granite Sqm 1088.98 1088.98
163 0521 Prepolished black granite 20 mm thick Sqm 1266.95 1266.95
164 0523 Prepolished Water cut grey granite Sqm 938.14 938.14
165 0725 Chequerred cement concrete tiles Sqm 190.68 190.68
166 0416 Tandur blue slabes 2.5cms to 4 cm thick Sqm 266.95 266.95
167 0545 20mm thick Hassan green granite Sqm 1355.93 1355.93
168 2076 Lakared granite Sqm 2266.95 2266.95
169 2085 Sadarahalli flammed granite 40mm Sqm 1000.00 1000.00
170 2086 Sadarahalli pre polished granite 20mm Sqm 854.24 854.24
171 2108 Black granite 40mm thick Sqm 1889.83 1889.83
172 0112 Colour glazed tiles 15 x 15 cms 10mm thick Each 6.78 6.78
173 0113 White glazed tiles 15 x 15 cms 6mm thick Each 5.08 5.08
174 0186 Hersian cloth for using in tiles as reinforcement sqm 34.44 34.44
175 0217 Linolium sheet for tile 30 cmsx30cms sqm 243.75 243.75
XXVI
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
176 0464 Yelahanka tiles of size 250x250 mm Each 4.76 4.76
Mangalore tiles first class and special tile for
177 0481 nos 13.33 13.33
ridges and hips
178 0485 Medium shade mosaic tiles sqm 106.78 106.78
179 0486 Ceramic tiles 15 cms x 15 cms sqm 233.05 233.05
White glazed tiles 15 cms x 15 cm , 10 mm
180 0444 Each 5.93 5.93
thick plain
Color glazed tiles 15 cm x 15 cm, 10 mm thick
181 0445 Each 5.93 5.93
anti skid
182 578 Pre polished grey granite tile 10mm sqm 457.63 457.63
183 579 Pre polished black granite tile 10mm sqm 889.83 889.83
184 2073 Concrete designer tiles sqm 436.44 436.44
185 2074 Ceramic tiles of 300x 600mm sqm 409.32 409.32
186 2075 Ceramic tiles of 300x 450mm sqm 320.34 320.34
187 2042 Border tiles 30x10cms Each 124.58 124.58
188 2043 Glazed tiles 300 x 450 sqm 249.15 249.15
189 2026 Ceramic tiles 400 x 400mm sqm 368.64 368.64
190 0495 Ready Mix Concrete M 20 (1:1.5:3) cum 4110.14 4110.17
191 0496 Ready Mix Concrete M 25 (1:1:2) cum 4194.92 4194.92
192 2200 Ready Mix Concrete M 30 cum 4237.29 4237.29
193 2201 Ready Mix Concrete M 35 cum 4406.78 4406.78
194 2202 Ready Mix Concrete M 40 cum 4576.27 4576.27
195 0003 18 gauge 75 mm MS laths of 2.8 m length Nos 186.44 186.44
196 0004 Z section Kgs 37.29 37.29
197 0019 Angle iron 40x40x6mm Kgs 37.29 37.29
198 0087 Channels 25x25x6 mm Kgs 37.29 37.29
199 0187 High tension coil oxidised MS Each 677.97 677.97
200 0203 Hooks oxidised MS 150 mm Each 16.95 16.95
201 0221 M.S. flat 30 cmx25mmx3mm Kgs 37.29 45.45
202 0223 M.S. Round Bright bars 20mm Q 3728.81 4545.00
203 0224 M.S. Square Bright bars 20mm Q 3728.81 4545.00
204 0249 Mild steel 6 mm dia Kgs 33.90 41.45
205 0250 Mild steel bars Q 3389.83 4145.00
XXVII
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
206 0252 MS channels Kgs 37.29 45.45
207 0255 MS flats 20 mm x 6 mm Kgs 37.29 45.45
208 0257 MS plates Kgs 37.29 45.45
209 0258 MS rods Kgs 33.90 41.45
210 0259 MS sheet 1 mm thick Kgs 35.59 40.00
211 0260 MS sheet 20 gauge Kgs 35.59 40.00
212 0262 MS tees Kgs 33.90 41.45
213 0264 Mullion section (MS) Kgs 33.90 33.90
214 0288 Pig lead Kgs 50.85 50.85
215 0414 T section MS Kgs 37.29 45.45
216 0484 M.S.Shoes Kgs 37.29 45.45
217 0547 Expanded metal 12.5 mm to 25 mm -14 G sqm 254.24 254.24
218 0714 Bearing plates Tonne 52542.37 52542.37
219 0716 Binding wire Kgs 55.08 55.08
220 0723 Cast Steel Kgs 42.37 42.37
221 0724 Cast Steel rocker assembly Kgs 72.03 72.03
Edge beams of steel of special shape and
222 0739 Kgs 49.15 49.15
section
223 0748 Forges Steel (2 rollers) Kgs 203.39 203.39
224 0756 High Tensile steel wires/strands Tonne 50847.46 50847.46
225 0757 High Tensile strands q 5084.75 5084.75
226 0759 ISMC 1002.806x1.05 Tonne 37288.14 37288.14
227 0763 Mild steel q 4508.00 4545.00
228 0764 Mild steel anchors Kgs 32.20 40.00
229 0765 Mild steel matrix including wastage Kgs 32.20 40.00
230 0766 Mild steel plate(Galvanised) Tonne 33898.31 41450.00
231 0767 MS bars Tonne 33898.31 41450.00
232 0770 MS flats Tonne 33898.31 41450.00
233 0771 Ms gratings 260 mmx 260 mm Each 84.75 84.75
234 0777 Pile shoes-Ci Kgs 84.75 84.75
235 0778 Pile shoes-MS Kgs 37.29 37.29
236 0792 Stainless steel 304 grade Kgs 254.24 254.24
XXVIII
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
237 0862 Mild Steel pipe 100mm dia 2.5mm thick m 254.24 254.24
238 0863 Mild Steel pipe 25mm dia 2.5mm thick m 84.75 84.75
239 0864 CGI sheets Kgs 33.90 33.90
240 0865 Angle iron 45x45x5mm Kgs. 37.29 45.45
M.S sheet 300mm wide,2.5mm long and
241 0866 Kgs. 37.29 45.45
2.6mm thick
242 0867 Angle iron 50x50x2mm long Kgs. 37.29 45.45
M.S sheet of 12 SWG, 3 Nos of 200mm width
243 0868 Kgs. 37.29 45.45
and 4m length
244 0870 Steel drum 300mm dia 1.2m high/empty Nos. 101.69 101.69
245 0940 Mild steel angle iron 75 x 75 x 6mm Kgs. 37.29 45.45
Mild steel angle iron 75 x 75x 6mm, 2.85
246 0941 Kgs. 37.29 45.45
metres long
Corrugated sheet, 3mm thicken "W" beam
247 0957 Kgs. 46.61 46.61
section railing, 4.5m in length.
248 0958 Channel post 150 x 75 x 5mm Kgs. 37.29 45.45
249 0959 Channel 150 x 75 x 5 mm Kgs. 37.29 45.45
Structural steel in plates, angles, Galvanised
250 0963 Tonne 37288.14 45450.00
structural steel plate etc.,including 5% wastage
251 0972 RS joist 100 x 75mm Kgs. 37.29 45.45
Struts - 2 Nos. for terminal posts, 2m long each
252 0973 Kgs. 37.29 45.45
2 x 2 x 11.50
Tie 2 Nos. of 8mm steel plate, 1.5sqm each for
253 0974 Kgs. 37.29 45.45
terminal posts at 62.80kg/sqm(2x1.5)
254 0975 Steel wire rope 40mm Kgs. 37.29 45.45
255 0976 Mild steel pipe 25mm dia, 2.5mm thick m 84.75 84.75
MS sheet for 600 x 300 x3mm rectangular
256 0977 Kgs. 37.29 45.45
vane, one number at 24 kg/sqm
MS sheet for 250mm dia circular vane 3mm
257 0978 Kgs. 37.29 45.45
thick, 4 number at 24 kg/sqm
258 0979 MS sheet 3mm thick at 24kg/sqm Kgs. 37.29 45.45
Galvanised angle sections 100mm x 10mm of
12mm thickness weldable structural steel as
259 0981 Kgs. 37.29 45.45
per IS:2062.2 Nos. of 12m length each at 17.7
kg/m
260 0988 Helical pipes 600mm diametre m 152.54 152.54
XXIX
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
261 0989 Tie rodes 20mm diametre Kgs. 37.29 37.29
Steel circular hollow pole of standard
262 1100 specification for street lighting to mount light at Each 6560.00 6560.00
9m height above road level.
Tube anchorage set complete with bearing
263 1510 No. 11864.41 11864.41
plate, permanent wedges etc.
264 1512 Bearing cc 0.51 0.51
265 1513 Bearing rocker & Roller No. 4237.29 4237.29
266 1516 Sheating duct ID 66mm Tonne 50847.46 50847.46
267 1519 32mm mild steel dowel bars of grade s240 Tonne 37288.14 45450.00
268 1520 16mm deformed steel tie bars fo grade S 415 Tonne 37288.14 45450.00
269 1534 20 x 5 mm diaganals Kgs. 37.29 37.29
Cast steel rocker bearing assembly of 250
tonne design load capacity duly painter
270 1553 Nos. 67796.61 67796.61
complete with all leads components as per
drawing and specifications
PTFE sliding plate bearing assembly of 80 t.
design load capacity duly painted complete
271 1554 Nos. 67796.61 67796.61
with all its components as per drawing &
technical specification.
272 558 MS angles 65 X 65 X 6 mm 34.7 Kgs Kgs. 37.29 45.45
273 562 38 mm dia of 14 guage MS black pipe m 42.37 42.37
274 561 20 mm dia hold fast Rod Nos. 50.85 50.85
275 571 Stainless steel strips m 186.44 186.44
276 573 M S Clamps for Shoe Kgs. 37.29 45.45
277 576 Steel column 400x250 mm (ISHB Series) Tonne 42372.88 42372.88
278 577 Forged steel rollar bearing of 250 tonne No. 3135.59 3135.59
Steel circular Hollow pole of standard
279 1103 specification for street lighting to mount light at each 4237.29 4237.29
5m height above road level.
280 2022 MS flat 12x75mm Kgs 37.29 37.29
281 2021 M S Tubes Kgs 50.85 50.85
282 2027 50mm dia M.S. Hollow pipe B Class 14 Gauge Kgs 50.85 50.85
283 2028 20mm x 20mm vertical M.S. Square Rod Kgs 37.29 45.45
284 2015 Gusset plates 6mm thick Kgs 50.85 50.85
XXX
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
285 2016 Base plate/ base plate Kgs 50.85 50.85
286 2018 Anchor Bolts 750mm No. 110.17 110.17
287 2029 12x12 M.S. Square Rod Kgs 37.29 45.45
288 2030 16x16mm M.S. Square Rod Kgs 37.29 45.45
289 2031 40x6mm M.S. Flat Kgs 37.29 45.45
290 2032 12mmx6mm M.S. Flat Kgs 37.29 45.45
291 2033 Cast iron spike Nos. 84.75 84.75
292 2034 50x50 M.S. Hollow pipe Kgs 50.85 50.85
293 2036 36mm x 6mm M.S. Flat Kgs 37.29 45.45
Stainless steel hollow pipes 14 gauge
294 2038 Kgs 254.24 254.24
50mm dia.
Stainless steel hollow pipe 14 gauge
295 2039 Kgs 254.24 254.24
25mm dia.
296 2040 5" dia 5mm thick M.S. plate Nos. 37.29 45.45
297 2067 MS pipes of 80mm to 100mm dia Kgs 37.29 45.45
298 2068 RMS Gusset plate Kgs 50.85 50.85
299 2078 Stainless steel tubes 40mm, 14 gauge Kgs 254.24 254.24
300 2091 M.S. Tube m 220.34 220.34
301 489 M.S. 20mm Square bar q 3728.81 4545.00
MS angle iron 40mm x 40mm x 6mm, 23 metre
302 0949 Kgs 37.29 45.45
in length at 3.5 kg pe metre
MS angle iron 50mm x 50mm x 6mm,
303 0950 Kgs 37.29 45.45
33.8 metre in length at 4.5 kg per metre.
304 0951 Runner flat 50 x 5mm Kgs 37.29 45.45
Welded steel with fabric 75 x 50mm mesh at
305 0952 Kgs 37.29 45.45
4kg/ sqm, 4 x 30 x 1.2+5% wastage
Steel pipe 50mm external dia as per IS:1239
306 0953 m 169.49 169.49
2.5mm thick
Medium wt. steel channel (ISMC Series)
307 0954 100mm x 50mm,10.8 metre length at Kgs 37.29 45.45
9.2 kg per m
308 0115 Corner beads 45x45 mm m 12.71 12.71
309 0190 Honne Wood Cum 60614.00 55854.00
310 0191 Honne Wood beading 10 mm wide m 15.00 12.71
XXXI
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
311 0193 Honne Wood beading 20x20 mm m 21.00 21.19
312 0194 Honne Wood scantling Cum 60614.00 55854.00
Honne Wood scantling for styles and rails
313 0195 Cum 60614.00 55854.00
30mm thick
Honne Wood scantling for styles and rails
314 0196 Cum 60614.00 55854.00
35mm thick
Honne wood planks for shutters(frame) 35mm
315 0198 cum 60614.00 55854.00
thick
316 0200 Honne wood planks for panels 20mm thick cum 60614.00 55854.00
317 0201 Honne wood battens cum 60614.00 55854.00
318 0202 Honne wood beads cum 60614.00 55854.00
319 0205 Jungle wood battens 25mm x 40mm cum 25558.00 29059.00
320 0206 Jungle wood battens 50mm x 40mm cum 25558.00 29059.00
321 0207 Jungle wood runners and planks cum 25558.00 29059.00
322 0208 Jungle wood runners and planks cum 25558.00 29059.00
323 0209 Jungle wood scantling cum 25558.00 29059.00
324 0238 mathi or Nandi wood cum 38563.00 39083.00
mathi or Nandi wood planks for panels 20mm
325 0239 cum 38563.00 39083.00
thick
mathi or Nandi wood scantlings for styles and
326 0240 cum 38563.00 39083.00
rail 25mm thick
327 0241 mathi/Nandi wood cum 38563.00 39083.00
328 0242 mathi/Nandi wood battens cum 38563.00 39083.00
329 0243 mathi/Nandi wood beadings 10mm wide m 8.47 8.00
mathi/Nandi wood planks for panels 25mm
330 0244 Cum 38563.00 39083.00
thick
331 0245 mathi/Nandi wood scantling cum 38563.00 39083.00
mathi or Nandi wood scantlings for styles and
332 0246 cum 38563.00 39083.00
rails 30mm thick
333 0266 Nandi wood reepers 50x25 mm m 59.32 45.76
334 0269 NUWUD (MDF) panel filling 19 mm thick Sqm 423.73 423.73
Panel filled with NUWUD (MDF) board 12 mm
335 0286 Sqm 381.36 381.36
thick
336 0294 planks for filling Sqm 10169.49 10169.49
XXXII
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
337 0332 Sal wood cum 36352.00 35415.00
338 0333 Sal wood battens cum 36352.00 36200.00
339 0389 silver oak or equivalent planks 38 mm thick cum 21186.44 21186.44
340 0417 Teak wood - superior grade cum 133909.00 119680.00
341 0418 Teak wood beading 10mm wide m 21.19 18.00
342 0419 Teak wood beading 20x20 mm m 55.08 55.08
343 0420 Teak wood cum Deleted Deleted
344 0421 Teak wood gutties Big Each 4.24 4.00
345 0422 Teak wood planks for panels 25 mm thick cum 133909.00 100000.00
346 0423 Teak wood reepers 50x25 mm m 118.64 100.00
Teak wood scantling for styles and rails 30mm
347 0424 cum 133909.00 100000.00
thick
Teak wood scantling for styles and rails 35mm
348 0425 cum 133909.00 100000.00
thick
349 0426 Teak wood beads cum 133909.00 100000.00
350 0429 TW beading for fixing glass m 16.95 16.95
Wooden strips of I class teak wood (25
351 0463 Each 42.37 42.37
mm/6mm) 4mtr. Long
352 0490 Jungle wood reepers 50x25 mm m 29.66 29.66
353 0706 25mm thick silver oak planks Sqm 12711.86 12711.86
354 0798 Wooden blocks Nos 169.49 169.49
355 0462 Wooden cleats Each 2.54 2.54
356 0080 Casuarina bellies 75 to 100 mm dia m 37.29 37.29
357 0081 Casuarina poles 100 to 150 mm m 47.46 47.46
358 0082 Casuarina poles 75 to 100 mm dia m 37.29 37.29
359 0869 Jungle wood cum 25558.00 29059.00
Wooden staff for fastening of flag 25mmdia,
360 0872 Each 8.47 8.47
one m long
361 0961 Wooden ballies 8"dia & 9m long No. 211.86 211.86
362 0962 Wooden ballies 2"dia for bracing m 21.19 21.19
363 2002 50x35mm salwood crunnel cum 38983.05 35415.00
364 2003 Teakwood gutties Small Nos. 1.69 1.69
365 2011 Teak wood beading 10mm wide m 21.19 21.19
XXXIII
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
366 0006 5.5mm thick plain glass Sqm 550.85 550.85
367 0170 Glass shelf 600x120mm with guard rail Each 779.66 779.66
368 0171 Glass strips Sqm 438.14 438.14
369 0172 Glazing clips Kgs 169.49 169.49
370 0467 4mm thick plain glass Sqm 423.73 423.73
371 0324 Reeded glass 2 mm thick Sqm 233.05 233.05
372 0325 Reeded glass 3 mm thick Sqm 275.42 275.42
373 0538 Imported glass 6 mm thick Sqm 762.71 762.71
374 2012 12mm thick plain tuffened glass Sqm 1949.15 1949.15
375 2014 12mm thick frosted toughened glass Sqm 2288.14 2288.14
376 2071 Glass etching Sqm 1144.07 1144.07
377 0005 25 mm dia pulley (for alluminum sliding door) Each 57.63 57.63
378 0011 Aluminium handles - 15mm Each 59.32 59.32
379 0012 Aluminium hinges 75 mm length Each 33.90 33.90
380 0038 Bottom lock nail Each 39.83 39.83
381 0046 Brass screws 25 mm Each 1.69 1.69
382 0085 Center pulley Each 84.75 84.75
383 0086 Central ball bearing Each 107.63 107.63
384 0107 Cleat angles Each 44.92 44.92
385 0133 Door closure heavy duty floor mounting Each 1118.64 1118.64
386 0134 Door lock Each 347.46 347.46
387 0177 Gusset plates 3.15 mm thick Kgs 51.69 51.69
388 0178 Handles power coated 150 mm Each 50.85 50.85
389 0179 Handles to full width 2m long Each 855.93 855.93
390 0188 Hinges 5" heavy duty Each 31.36 31.36
391 0189 Hold fasts MS Each 32.20 32.20
392 0220 Locking arrangments Each 550.85 550.85
393 0222 M.S. holder bat clamp 32mm Each 38.14 46.00
M.S stays and clamps for 200 mm length
394 0225 Each 39.83 47.00
including bolts and nuts
M.S stays and clamps for 50 mm length
395 0226 Each 22.03 22.03
including bolts and nuts
XXXIV
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
M.S stays and clamps for 75 mm length
396 0227 Each 27.97 27.97
including bolts and nuts
397 0253 MS clamps Each 32.20 40.00
398 0254 MS cleats with bolts and nuts to rest on pile Each 11.02 11.02
399 0256 MS handles oxidised 150 mm Each 55.08 55.08
400 0261 MS side shed clamps Each 52.54 52.54
401 0265 Nail and screws Kgs 45.76 45.76
402 0314 Pulleys 38 mm dia Each 43.22 43.22
403 0326 Reeper nails 50 mm long Kgs 44.07 44.07
404 0384 Screws 40 mm Each 2.54 2.54
405 0388 Side guides Each 114.41 114.41
406 0399 Stays (MS) Each 16.95 16.95
407 0427 Tower bolt 300 mm long Each 101.69 101.69
408 0474 Pivots Nos 466.10 466.10
409 0540 Screws Nos 3.39 3.39
410 0537 Box cleats Nos 32.20 32.20
411 0541 Anchor Bolts Nos 14.41 14.41
412 0542 Galvanized L brackets Nos 33.90 33.90
413 0708 Steel inserts with stainless steel bolts and nuts Kgs 62.71 62.71
414 0719 Bolts and nuts Kgs 71.19 71.19
415 0768 MS bolts, nuts and washers Tonne 75423.73 75423.73
416 0710 Anchorages Each 101.69 101.69
417 0711 Anchor loops (IS 2062) Each 275.42 275.42
418 0712 Anchor plates (IS 2062) Each 199.15 199.15
419 0713 Anchorage sets Each 84.75 84.75
420 0094 Chrominum plated screw -25mm Each 3.39 3.39
421 0167 Gl 'j' or 'L' hook with nuts and bolts 8mm dia Each 14.41 14.41
422 0291 Pintels including welded pins Each 11.02 11.02
423 0492 C.P brass brackets Pair 27.97 27.97
424 2084 Hydraulic door clouser - aluminium body No. 760.17 760.17
425 0015 Aluminium paint L 173.13 173.13
426 0016 Aluminium paint primer (red oxide) L 84.75 84.75
XXXV
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
427 0020 Anticorrosive bitumastic paint L 118.64 118.64
428 0033 Black Japan paint L 97.46 97.46
429 0131 Dark shade pigment Kgs 171.19 171.19
430 0132 Distemper primer L 67.80 67.80
431 0136 Dry Distumper Kgs 55.93 55.93
432 0137 Enamel metal paint L 207.63 207.63
433 0138 Enamel primer L 156.78 156.78
434 0214 Light shade pigment Kgs 152.54 152.54
435 0247 Medium shade pigment Kgs 182.20 182.20
436 0285 Paint remover L 110.17 110.17
437 0289 Pigment Kgs 33.90 33.90
438 0290 Pink primer paint L 127.12 127.12
439 0300 Plastic emulsion paint L 194.92 194.92
440 0320 Ready mix primer paint L 84.75 84.75
441 0321 Ready mix red lead paint L 84.75 84.75
442 0323 Red oxide Kgs 84.75 84.75
443 0430 undercoat flatting varnish L 139.83 139.83
444 0431 Unslaked lime qtl 423.73 423.73
445 0432 Varnish L 142.86 142.86
446 0433 Wall paint L 169.49 169.49
447 0435 Water proof cement paint Kgs 72.03 72.03
448 0438 Wax polish Kgs 237.29 237.29
449 0271 Oil bound distemper Kgs 111.86 111.86
450 0428 Turpentine Oil L 63.56 63.56
451 0543 Anodized M R F painting Sqm 289.83 289.83
452 0447 White lead paint for priming L 93.22 93.22
453 0461 Whitening Kgs 18.64 18.64
454 0775 Paint I quality(synthetic enamel paint) L 228.81 228.81
455 0776 Pigment Kgs 50.85 50.85
456 0784 Road marking paint L 203.39 203.39
457 0779 Primer L 65.25 65.25
XXXVI
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
458 0173 Gopi powder Kgs 59.32 59.32
459 0218 Linseed oil L 148.31 148.31
460 0219 Liquid wood filler L 186.44 186.44
461 0524 Sand paper Dozen 68.57 68.57
462 0525 50 size sand paper Dozen 114.29 114.29
463 0526 36 size sand paper Dozen 114.29 114.29
464 569 Primer/kg Kgs. 88.98 88.98
465 0528 Wax Kgs 177.97 177.97
466 0529 Sealer Coat L 186.44 186.44
467 0530 Melamine Patty Kgs 177.97 177.97
468 0531 Melamine Polish L 186.44 186.44
469 0532 Thinner L 105.93 105.93
470 0543 Anodized M R F painting Sqm 289.83 289.83
471 1504 Epoxy resin hardener mix for primne coat Kgs 576.27 576.27
472 2044 Light House Polish L 186.44 186.44
473 2045 Texture material Kgs 25.42 25.42
474 2046 Antifungal paint L 286.44 286.44
475 2050 Textured based white cement Kgs 32.81 32.81
476 2060 Soap powder Kgs 105.93 105.93
477 2081 Wiping cloths Each 22.86 22.86
478 2083 Soap oil / Phenol L 38.14 38.14
479 2092 Solvent cement adhesive L 169.49 169.49
480 0995 Water based paint for cement concrete surface L 58.59 58.59
Asbestos cement pipes 75 mm dia of length 2
481 0021 Each 122.88 122.88
mtrs
482 0095 CI Bends 100 mm dia Each 296.61 296.61
483 0096 CI Bends 75 mm dia Each 241.53 241.53
484 0097 CI Bends 90 mm dia Each 127.12 127.12
485 0098 CI heads 100 mm dia Each 152.54 152.54
486 0099 CI pipes 100 mm dia of 1.8m length Each 1165.25 1165.25
487 0100 CI pipes 75 mm dia of 1.8m length Each 957.63 957.63
488 0101 CI shoes 100 mm dia Each 254.24 254.24
XXXVII
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
489 0102 CI shoes 110 mm dia Each 283.90 283.90
490 0103 CI shoes 75 mm dia Each 296.61 296.61
491 0146 G.I. Overflow pipe 20mm dia m 131.36 131.36
492 0147 G.I. Pipe 100 mm dia B class m 720.34 720.34
493 0148 G.I. Pipe 150 mm dia B class m 1076.27 1076.27
494 0149 G.I. Pipe 15 mm dia B class m 101.69 101.69
495 0150 G.I. Pipe 20 mm dia B class m 127.12 127.12
496 0151 G.I. Pipe 25 mm dia B class m 177.97 177.97
497 0152 G.I. Pipe 32 mm dia B class m 203.39 203.39
498 0153 G.I. Pipe 40 mm dia B class m 254.24 254.24
499 0154 G.I. Pipe 50 mm dia B class m 279.66 279.66
500 0155 G.I. Pipe 65 mm dia B class m 423.73 423.73
501 0156 G.I. Pipe 80 mm dia B class m 542.37 542.37
502 0157 G.I. Tee 32mm Each 93.22 93.22
503 0158 G.I. Tee 65mm Each 313.56 313.56
504 0169 GI washers Each 12.71 12.71
505 0182 HDPE 110mm dia, 4Kg/sqcm m 161.02 161.02
506 0183 HDPE 110mm outer dia, 2.5Kg/sqcm m 161.02 161.02
507 0184 HDPE 90mm outer dia, 4Kg/sqcm m 127.12 127.12
HDPE 90mm outer dia, 2.5Kg/sqcm
508 0185 m 106.78 106.78
(rain down water pipes)
P.V.C. Lead connection pipe 32 mm dia
509 0212 Each 118.64 118.64
(for wash basin)
Polythylene pipes high density 32mm external
510 0303 m 135.59 135.59
dia
Polythylene pipes high density 40mm external
511 0304 m 152.54 152.54
dia
Polythylene pipes high density 50mm external
512 0305 m 203.39 203.39
dia
Polythylene pipes high density 20mm external
513 0306 m 38.14 38.14
dia
Polythylene pipes high density 25mm external
514 0307 m 55.08 55.08
dia
XXXVIII
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
Polythylene pipes high density 32mm external
515 0308 m 101.69 101.69
dia
Polythylene pipes high density 40mm external
516 0309 m 127.12 127.12
dia
Polythylene pipes high density 50mm external
517 0310 m 152.54 152.54
dia
Sand cast iron bend 100 mm dia with access
518 0335 Each 330.51 330.51
door, washers, bolts and nuts
Sand cast iron bend 50 mm dia with access
519 0336 Each 254.24 254.24
door, washers, bolts and nuts
Sand cast iron bend 75 mm dia with access
520 0337 Each 271.18 271.19
door, washers, bolts and nuts
521 0338 Sand Cast iron pipe 100 mm dia 1.8m length Each 711.86 711.86
522 0339 Sand Cast iron pipe 50 mm dia 1.8m length Each 330.51 330.51
523 0340 Sand Cast iron pipe 75 mm dia 1.8m length Each 686.44 686.44
524 0342 Sand Cast iron plain bend 50 mm dia Each 203.39 203.39
525 0344 Sand Cast iron soil waste 114mm offsets 3" dia Each 288.14 288.14
526 0345 Sand Cast iron soil waste 152mm offsets 3" dia Each 491.53 491.53
527 0346 Sand Cast iron soil waste 230mm offsets 3" Each 533.90 533.90
Sand Cast iron soil waste double equal
528 0347 invert plain branches of required degree Each 741.53 741.53
'100x100x100x100mm
Sand Cast iron soil waste double equal
529 0348 invert plain branches of required degree Each 300.85 300.85
'50x50x50x50mm
Sand Cast iron soil waste double equal
530 0349 invert plain branches of required degree Each 466.10 466.10
'75x75x75x75mm
Sand Cast iron soil waste double equal junction
531 0350 Each 635.59 635.59
of required degree '100x100x100x100mm
Sand Cast iron soil waste double equal
532 0351 Each 296.61 296.61
junction of required degree '50x50x50x50mm
Sand Cast iron soil waste double equal junction
533 0352 of required degree with access 'door, rubber Each 813.56 813.56
washers bolts and nuts, 100x100x100x100mm
Sand Cast iron soil waste double equal junction
534 0353 of required degree with access 'door, rubber Each 711.86 711.86
washers bolts and nuts, 100x100x50x50mm
XXXIX
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
Sand Cast iron soil waste double equal junction
535 0354 of required degree with access 'door, rubber Each 813.56 813.56
washers bolts and nuts, 100x100x75x75mm
Sand Cast iron soil waste double equal junction
536 0355 of required degree with access 'door, rubber Each 584.75 584.75
washers bolts and nuts, 75x75x75x75mm
Sand Cast iron soil waste double equal junction
537 0356 of required degree with access 'door, rubber Each 432.20 432.20
washers bolts and nuts, 75x75x50x50mm
Sand Cast iron soil waste double unequal
538 0357 invert plain branches of required degree Each 533.90 533.90
'100x100x75mm
Sand Cast iron soil waste double unequal
539 0359 invert plain branches of required degree Each 788.14 788.14
'100x100x75x75mm
Sand Cast iron soil waste double unequal
540 0360 invert plain branches of required degree Each 491.53 491.53
'75x75x50mm
Sand Cast iron soil waste double unequal
541 0361 invert plain branches of required degree Each 406.78 406.78
'75x75x50x50mm
Sand Cast iron soil waste double
542 0362 unequal junction of required degree Each 813.56 813.56
'100x100x50x50mm
Sand Cast iron soil waste double
543 0363 unequal junction of required degree Each 813.56 813.56
'100x100x75x75mm
Sand Cast iron soil waste double unequal
544 0364 Each 305.08 305.08
junction of required degree '75x75x50x50mm
Sand Cast iron soil waste single equal
545 0365 invert plain branches of required degree Each 677.97 677.97
'100x100x100x100mm
Sand Cast iron soil waste single equal
546 0366 invert plain branches of required degree Each 440.68 440.68
'50x50x50x50mm
Sand Cast iron soil waste single equal
547 0367 invert plain branches of required degree Each 508.47 508.47
'75x75x75x75mm
Sand Cast iron soil waste single equal junction
548 0368 of required degree with access 'door, rubber Each 508.47 508.47
washers bolts and nuts, 75x75x75mm
Xl
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
Sand Cast iron soil waste single equal
549 0369 junction of required degree with access door ' Each 694.92 694.92
100x100x100mm
Sand Cast iron soil waste single equal
550 0370 junction of required degree with access door ' Each 389.83 389.83
50x50x50mm
Sand Cast iron soil waste single equal
551 0371 junction of required degree with access door ' Each 508.47 508.47
75x75x75mm
Sand Cast iron soil waste single equal junction
552 0372 of required degree with access 'door, rubber Each 711.86 711.86
washers bolts and nuts, ' 100x100x100mm
Sand Cast iron soil waste single equal junction
553 0373 of required degree with access 'door, rubber Each 440.68 440.68
washers bolts and nuts, ' 50x50x50mm
Sand Cast iron soil waste single unequal
554 0374 Each 360.17 360.17
junction of required degree 100x100x50mm
Sand Cast iron soil waste single unequal
555 0375 Each 347.46 347.46
junction of required degree 100x100x75mm
Sand Cast iron soil waste single unequal
556 0376 Each 288.14 288.14
junction of required degree 75x75x50mm
Sand Cast iron soil waste single unequal
junction of required degree with access
557 0377 Each 576.27 576.27
'door, rubber washers bolts and nuts,
100x100x50mm
Sand Cast iron soil waste single unequal
junction of required degree with access
558 0378 Each 610.17 610.17
'door, rubber washers bolts and nuts,
100x100x75mm
Sand Cast iron soil waste single unequal
559 0379 junction of required degree with access 'door, Each 398.31 398.31
rubber washers bolts and nuts, 750x75x50mm
Sand Cast iron soil waste double equal junction
560 0380 of required degree with access 'door, rubber Each 508.47 508.47
washers bolts and nuts, 50x50x50x50mm
561 0381 Sand cast iron trap 100mm dia Each 500.00 500.00
562 0382 Sand cast iron trap 50mm dia Each 394.07 394.07
563 0383 Sand cast iron trap 75mm dia Each 440.68 440.68
564 0393 Special for overflow pipe Each 37.29 37.29
565 0402 Stoneware pipes 100mm dia 60 cms long Each 53.39 53.39
Xli
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
566 0403 Stoneware pipes 150mm dia 60 cms long Each 88.98 88.98
567 0404 Stoneware pipes 200mm dia 60 cms long Each 124.58 124.58
568 0405 Stoneware pipes 230mm dia 60 cms long Each 133.90 133.90
569 0406 Stoneware pipes 250mm dia 60 cms long Each 142.37 142.37
570 0407 Stoneware pipes 300mm dia 60 cms long Each 152.54 152.54
571 0408 Stoneware pipes 350mm dia 60 cms long Each 156.78 156.78
572 0409 Stoneware pipes 400mm dia 60 cms long Each 165.25 165.25
573 0410 Stoneware pipes 450mm dia 60 cms long Each 194.92 194.92
100 mm dia asbestos dia cement pipe of length
574 0476 Each 105.93 105.93
2 mtrs
110 mm outer dia 2 kg/sqcm pressure pipe of
575 0477 m 152.54 152.54
approved make (PVC)
110 mm outer dia 2.5 kg/sqcm pressure pipe of
576 0478 m 152.54 152.54
approved make (PVC)
90 mm outer dia 2kg/sqcm pressure pipe of
577 0479 m 110.17 110.17
approved make (PVC)
Sand cast iron soil waste double equal junction
578 0493 m 466.10 466.10
of required degree, 75x75x75x75 mm
579 0534 M S Square pippe 16 G Black pipe Kg 37.29 45.45
580 0702 100 mm asbestos cement pipes m 42.37 42.37
581 0703 100 mm dia 1 m long GI pipe m 728.81 728.81
582 0755 HDPE pipes-90 mm dia m 106.78 106.78
583 0782 RCC pipes NP3 1200 mm dia including collars m 6449.15 6449.15
584 0783 RCC pipes NP3 900 mm dia including collars m 4135.59 4135.59
585 0821 RCC pipes NP3 300 mm dia including collars m 978.81 978.81
586 0822 RCC pipes NP3 450 mm dia including collars m 1822.03 1822.03
587 0823 RCC pipes NP3 600 mm dia including collars m 2313.56 2313.56
588 0824 RCC pipes NP3 750 mm dia including collars m 2533.90 2533.90
589 0825 RCC pipes NP2 300 mm dia including collars m 711.86 711.86
590 0826 RCC pipes NP2 450 mm dia including collars m 978.81 978.81
591 0827 RCC pipes NP2 600 mm dia including collars m 1512.71 1512.71
592 0828 RCC pipes NP2 750 mm dia including collars m 1868.64 1868.64
593 0829 RCC pipes NP2 900 mm dia including collars m 2444.92 2444.92
Xlii
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
594 0830 RCC pipes NP2 1200 mm dia including collars m 4224.58 4224.58
595 0831 RCC pipes NP4 900 mm dia including collars m 5025.42 5025.42
596 0832 RCC pipes NP4 1200 mm dia including collars m 8097.46 8097.46
597 565 RCC pipes NP2 150 mm dia including collars m 266.95 266.95
598 566 RCC pipes NP2 250 mm dia including collars m 355.93 355.93
599 0911 RCC pipes 200mm dia, 2.5m long for drainage m 220.34 220.34
600 0929 Plastic tubes 50cm dia, 1.2m high Nos. 23.73 23.73
601 568 RCC NP 4 100 mm dia including collars m 523.73 7288.14
602 0001 100mm 'S' or 'P' trap Each 50.85 50.85
Bevel lead mirror of superior glass of size
603 0023 Each 720.34 720.34
600x450mm
604 0024 Bib cock 15mm nominal bore-NP Each 148.31 148.31
605 0025 Bib cock 20mm nominal bore-NP Each 135.59 135.59
606 0026 Bib cock 25mm nominal bore-NP Each 186.44 186.44
607 0027 Bib cock 32mm nominal bore-NP Each 254.24 254.24
608 0028 Bib cock 40mm nominal bore-NP Each 254.24 254.24
609 0029 Bib cock 50mm nominal bore-NP Each 296.61 296.61
610 0034 black plastic seat and lid as specified Each 245.76 245.76
Brass ball vlave with plastic float 15mm
611 0040 Each 254.24 254.24
nominal bore
Brass ball vlave with plastic float 20mm
612 0041 Each 271.19 271.19
nominal bore
Brass ball vlave with plastic float 25mm
613 0042 Each 389.83 389.83
nominal bore
Brass ferrule and C.1 Mouth cover 15mm
614 0043 Each 101.69 101.69
nominal bore
Brass ferrule and C.1 Mouth cover 20mm
615 0044 Each 142.37 142.37
nominal bore
Brass ferrule and C.1 Mouth cover 25mm
616 0045 Each 169.49 169.49
nominal bore
617 0047 Brass shower rose C.P 100mm dia Each 498.31 498.31
618 0048 Brass shower rose C.P 150mm dia Each 550.85 550.85
619 0049 Brass stop cock-15mm Each 186.44 186.44
Xliii
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
Brass union 15mm nominal bore with PVC
620 0050 Each 142.37 142.37
connection pipe 300mm length Each
Brass union 15mm nominal bore with PVC
621 0051 Each 160.17 160.17
connection pipe 450mm length
Brass union 20mm nominal bore with PVC
622 0052 Each 160.17 160.17
connection pipe 300mm length
Brass union 20mm nominal bore with PVC
623 0053 Each 169.49 169.49
connection pipe 450mm length
C.I manhole cover with frame 610x455mm size
624 0067 Each 2118.64 2118.64
(38 Kgs)
625 0068 C.I/M.S. brackets for flushing cistern Pair 110.17 110.17
626 0069 C.I Cover 500mm dia -50mmthick(16Kgs) Each 932.20 932.20
627 0070 C.P brass chain plug Each 110.17 110.17
628 0071 C.P brass chain with stainless steel plug Each 194.92 194.92
629 0072 C.P.brass pillar tap elbow operated Each 415.25 415.25
630 0073 C.P. brass screws 25mm with washers Each 4.24 4.24
631 0074 C.P.brass towel rail 600mm length 20mm dia Each 409.32 409.32
632 0075 C.P.brass towel rail 740mm length 20mm dia Each 462.71 462.71
C.P.brass waste union 32mm of standard
633 0076 Each 161.02 161.02
pattern
634 0077 C.P.brass waste union 40mm with fittings Each 161.02 161.02
635 0079 Cast iron foot rest Each 118.64 118.64
Circular shape mirror of size 450mm dia with
636 0105 Each 466.10 466.10
plastic moulded frame
637 0114 Copper plated brass piller tap Each 211.86 211.86
Gun metal non-return valve 100mm nominal
638 0117 Each 1949.15 1949.15
bore horizontal type
Gun metal non-return valve 100mm nominal
639 0118 Each 1779.66 1779.66
bore verticall type
Gun metal non-return valve 25mm nominal
640 0119 Each 466.10 466.10
bore horizontal type
Gun metal non-return valve 25mm nominal
641 0120 Each 373.73 373.73
bore vertical type
Gun metal non-return valve 32mm nominal
642 0121 Each 593.22 593.22
bore horizontal type
Xliv
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
Gun metal non-return valve 32mm nominal
643 0122 Each 593.22 593.22
bore vertical type
Gun metal non-return valve 40mm nominal
644 0123 Each 762.71 762.71
bore horizontal type
Gun metal non-return valve 40mm nominal
645 0124 Each 720.34 720.34
bore vertical type
Gun metal non-return valve 50mm nominal
646 0125 Each 1076.27 1076.27
bore horizontal type
Gun metal non-return valve 50mm nominal
647 0126 Each 1016.95 1016.95
bore vertical type
Gun metal non-return valve 65mm nominal
648 0127 Each 1398.31 1398.31
bore horizontal type
Gun metal non-return valve 65mm nominal
649 0128 Each 1271.19 1271.19
bore vertical type
Gun metal non-return valve 80mm nominal
650 0129 Each 1737.29 1737.29
bore horizontal type
Gun metal non-return valve 80mm nominal
651 0130 Each 1559.32 1559.32
bore vertical type
652 0139 Europian type water closet of specified make Each 978.81 978.81
G.I 32mm dia telescopic flush pipes with
653 0143 Set 320.34 320.34
fittings/specials
G.I.Flush pipe of standard size and C.P brass
654 0144 spreaders,brass unions and clamps 'including Set 466.10 466.10
fittings
655 0145 G.I jam nut Each 21.19 21.19
656 0159 Gate valve 15mm nominal bore-gun metal Each 211.86 211.86
657 0160 Gate value 20mm nominal bore-gun metal Each 262.71 262.71
658 0161 Gate value 25mm nominal bore-gun metal Each 355.93 355.93
659 0162 Gate value 32mm nominal bore-gun metal Each 661.02 661.02
660 0163 Gate value 40mm nominal bore-gun metal Each 830.51 830.51
661 0164 Gate value 50mm nominal bore-gun metal Each 1398.31 1398.31
662 0165 Gate value 65mm nominal bore-gun metal Each 1694.92 1694.92
663 0166 Gate value 80mm nominal bore-gun metal Each 1796.61 1796.61
indian type water closet of size 580 mm of
664 0204 Each 601.69 601.69
specified make with footrests
Orissa pattern of size 575x425 mm with integal
665 0273 Each 1186.44 1186.44
type foot rests
Xlv
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
Oval shape mirror of size 450x350 mm with
666 0274 Each 508.47 508.47
plastic moulded frame
P.V.C automatic flushing cistern 7.5 litres with
667 0275 Each 593.22 593.22
fittings
P.V.C automatic flushing cistern with fittings 10
668 0276 Each 593.22 593.22
litres
P.V.C automatic flushing cistern with fittings 15
669 0277 Each 677.97 677.97
litres
P.V.C flushing cistern 10 litres low level with
670 0278 Each 576.27 576.27
accessories 40mm flush pipe
671 0279 P.V.C pipes unplasticised 16mm m 38.14 38.14
672 0280 P.V.C pipes unplasticised 20mm m 38.14 38.14
673 0281 P.V.C pipes unplasticised 25mm m 46.61 46.61
674 0282 P.V.C pipes unplasticised 32mm m 55.08 55.08
P.V.C automatic flushing cistern 5 litres with
675 0283 Each 444.92 444.92
fittings
P.V.C flushing cistern 10 litres low level with
676 0284 Each 533.90 533.90
fittings
677 0411 stop cock Each 110.17 110.17
678 0434 water meter Each 661.02 661.02
Polyethylene water storage tank of specified
679 0302 L 5.08 5.08
capacity and make
Rectangulur shape mirror of size 1500x450mm
680 0322 Each 932.20 932.20
with drain board of specific make
Stainless steel kitchen sink of size 400x470mm
681 0396 Each 4004.24 4004.24
with drain board of specific make
Stainless steel kitchen sink of size
682 0397 Each 5932.20 5932.20
500x1000mm with drain board of specific make
Stainless steel kitchen sink of size
683 0398 Each 10254.24 10254.24
510x1575mm with drain board of specific make
White glazed fire clay kitchen sink of size
684 0440 Each 1144.07 1144.07
600x450x250mm
White glazed fire clay kitchen sink of size
685 0441 Each 1457.63 1457.63
750x450x250mm
White glazed fire clay laboratory sink of size
686 0442 Each 779.66 779.66
450x300x150mm
XLvI
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
White glazed fire clay laboratory sink of size
687 0443 Each 1016.95 1016.95
600x450x200mm
White glazed/vitreous china clay 10 lts low
688 0446 level flushing cistern, with fittings and \brakets Set 1601.69 1601.69
and 40mm white C.P flush pipe
White vitreous china clay angle back wash
689 0449 Each 682.20 682.20
basin size 500x400mm
White vitreous china clay angle back wash
690 0450 Each 889.83 889.83
basin size 600x480mm
White vitreous china clay flat back lipped front
691 0451 Each 610.17 610.17
urinal basin of 430x260x350mm size
White vitreous china clay flat back large urinal
692 0453 Each 1694.92 1694.92
basin size 580x380x350mm
White vitreous china clay flat back wash basin
693 0454 Each 508.47 508.47
size 450x330mm
White vitreous china clay flat back wash basin
694 0455 Each 677.97 677.97
size 550x400mm
White vitreous china clay flat back wash basin
695 0456 Each 779.66 779.66
size 630x450mm
696 0457 White vitreous china clay squatting plate Each 847.46 847.46
White vitreous china clay surgeon type wash
697 0458 Each 847.46 847.46
basin size 600x450x250mm
White vitreous china clay wall corner
698 0460 type, lipped front urinal basin of size Each 525.42 525.42
'340x410x265mm
699 0487 C.P. brass tap with union Each 254.24 254.24
Rectangulur shape mirror of size 453x357mm
700 0491 Each 720.34 720.34
with plastic moulded frame
701 0546 ceeramic tiles of size 30x30cms Sqm 398.31 296.61
702 2035 Colour Glazed tiles 30x60cms 6mm thick Each 72.03 72.03
703 2096 L. Bracket Nos. 25.42 25.42
704 0542 Galvanized L brackets Nos 33.90 33.90
705 2079 Granite sink 23cm thick Each 9152.54 9152.54
706 2098 Rubber Gaskete m 12.71 12.71
707 0083 Caustic soda Kgs 38.14 38.14
708 0092 Chiken mesh Sqm 12.71 12.71
XLvII
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
709 0168 GI plaster mesh 0.35 mm thick 10 cms wide m 29.66 29.66
710 0251 Mosquito proof coupling 25 mm Each 25.42 25.42
711 0295 Plaster mesh 100mm wide m 21.19 21.19
712 0296 Plaster mesh 150mm wide m 25.42 25.42
713 0297 plaster mesh 200mm wide m 29.66 29.66
714 0318 Rabbit wire mesh Sqm 55.08 55.08
715 548 Weld Mesh 75mmx25mm of 6G to 10G Sqm 249.15 249.15
716 549 Weld Mesh 75x50mm of 6G to 10G Sqm 186.14 186.44
717 0729 Copper plate 12 m long x 250 mm wide Kgs 409.32 409.32
Wire create size(1.8x1.8mx0.9m)=2.916(4mm
718 0796 Kgs 152.54 152.54
dia 2GI wire in 15 cms x 15 cms mesh)
719 0797 Wire mesh 50 mm x 50 mm Sqm 279.66 279.66
720 0816 Form work for kerb stone/KM stone Sqm 15.25 15.25
721 0104 Cinder ballast cum 254.24 254.24
722 0093 Chlorophriphos emulstiable concentrate L 169.49 169.49
723 0065 Burnt lime/shell lime q 447.62 447.62
724 0141 Fly ash cum 15.25 15.25
725 0142 Fuel (firewood) q 476.19 476.19
726 0210 Kerosene oil L 47.62 47.62
727 0215 Lime cum 3800.00 3800.00
728 0216 Lime surkhi mortar 1:2 cum 423.73 423.73
729 0263 Mud mortar cum 190.48 190.48
730 0267 Nitric Acid L 72.03 72.03
731 0299 Plaster of Paris Kgs 25.00 25.00
732 0394 Spirit L 42.37 42.37
733 0412 Surkhi cum 333.33 333.33
734 0436 Water proofing compound Kgs 42.37 42.37
735 0709 Admixture/Super Plasticizer L 169.49 169.49
736 0715 Bentonite Tonne 4067.80 4067.80
737 0741 Epoxy for mortar Kgs 148.31 148.31
738 0742 Epoxy for tack coat Kgs 333.33 333.33
XLViii
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
739 0743 Epoxy material for fixing Kgs 42.37 42.37
740 0760 Joint filler (0.01 cm wide and 0.12mm wide) Sqm 169.49 169.49
741 0761 Joint sealing com 25 mm deep Kgs 135.59 135.59
742 0811 Chloroperene C.C. 0.85 0.85
743 0812 Natural Rubber C.C. 0.85 0.85
744 0813 Neoprene Kgs 194.92 194.92
745 0818 Water KL 40.00 40.00
746 0268 Nortlight adjustable ridges of 1.22m Pair 135.59 135.59
747 0270 Nylon rollers Each 9.00 9.00
748 0315 Putty for filling holes Kgs 67.80 67.80
749 0319 Rawl Plug 40 to 50mm Each 1.69 1.69
750 0317 PVC Beading m 10.17 10.17
Roofing felt type-2 grade-1 fibre based self
751 0328 Sqm 93.22 93.22
finish and bitumen based
752 0329 Rubber heading for shutturs beading m 25.42 25.42
753 0392 Spun yarn Kgs 33.90 33.90
754 0413 Suspension shaft m 762.71 762.71
755 0516 Plastic sheet Sqm 5.36 5.36
756 0527 Steel wool Pack 21.19 21.19
757 0535 Glazing seal m 271.19 271.19
758 0536 Weather Seal Nos 186.44 186.44
759 0539 Specer tape Sqm 29.66 29.66
20mm thick compressible fiber band 12 m long
760 0704 Sqm 338.98 338.98
x 25 cm deep
761 0705 20 mm thick filler 12m long x 25 cm deep Sqm 364.41 364.41
762 0737 Deviator Plates Tonne 38983.05 38983.05
Elastomeric slab with MS plates inserted inside
763 0740 polysulphine compound filling Space around C.C. 0.42 0.42
Bolts and nuts
764 0774 Nipples Each 8.47 8.47
765 0788 Sheething duct ID m 12.71 12.71
766 0809 PTFE Nodules Sq.cm 6.78 6.78
767 0810 PTFE Nodules cm 0.85 0.85
XLix
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
S.F.R.C. Cover and frame 560 mm (ID) heavy
768 0331 Each 762.71 762.71
duty
769 0850 Fine Grass Kgs. 5.93 5.93
770 0851 Hedge plant Each 3.00 25.40
771 0852 Flowring plants Each 2.00 20.00
772 0853 Shrubs Each 2.00 20.00
773 0854 Sapiling 2m high 25mm dia Each 10.00 10.00
774 0855 Neem cake q 900.00 900.00
775 0856 Empty bitumen drum Each 125.00 125.00
776 0857 Rivets Each 2.86 2.86
777 0858 Steel wire 3mm dia Kgs 38.14 38.14
778 0859 Sapling 1 to 1.5m high 2cm dia stem Nos. 6.78 6.78
779 0861 Traffic cones with 150mm reflective sleeve Nos. 338.98 338.98
780 0871 Flag of red color cloth 600x600mm Each 20.00 20.00
781 0900 Supply of quarried stone 150-200 size cum 338.98 338.98
782 0901 Stone boulder of size 150mm and below cum 446.43 446.43
Precast cement concrete tiles Tiles size
783 0910 Nos. 23.81 23.81
300x300mm and 25mm thick
784 1104 Jute Rope m 4.76 4.76
785 0925 cold miling machine at 20cum per hour cum 16.95 16.95
786 0927 Scrap types of size 900x20 Nos. 200.00 200.00
787 0928 20mm steel wire rope Kgs. 33.90 33.90
788 0933 Geotextile filter frabic Sqm. 66.96 66.96
789 0934 perforated geosynthetic pipe 150mm dia m 211.86 211.86
790 0935 Paving fabric Sqm. 17.86 17.86
791 0936 Geogrids Sqm. 254.24 254.24
792 0937 Connectors/staples Each 5.08 5.08
793 0938 Polymer braids m 25.42 25.42
794 0945 Hot applied thermoplatic compound L 67.80 67.80
795 0946 Reflectorising glass beads Kgs. 46.61 46.61
Cost of approved type of delineators from ISI
796 0947 certified firm as per the standard drawing given Each 220.34 220.34
in IRC:79
l
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
Barbed wire 335 metre length at 9.38 kg per
797 0948 Kgs. 29.66 29.66
100 metre
798 0960 Sand bags(cost of sand in empty cement bag) No. 47.62 47.62
799 0964 Admixture Kgs. 63.56 63.56
M 35 grade RCC corbel provided for
800 0966 cum 3559.32 3559.32
supporting of euipment
801 0971 NUTS AND Bolts Kgs. 42.37 42.37
Elastomeric slab seal expansion joint assembly
manufactured by using chloroprene, elastomer
802 0980 for elastomeric slab unit conforming to clause m 10169.49 10169.49
9150.1 of IRC:83 (part II) conforming to clause
2600.6 of Morth specifications.
Preformed continuous chloroprene elastoemer
or closed cell foam sealing sealing element
803 0982 with high mtear strength vulcanised in a single m 11186.44 11186.44
operation for the full length of a joint ot ensure
water tightness.
Supply of complete assembly of strip seal
expansion joint comprising of edge beams,
804 0983 anchorage, strip seal element and complete m 10169.49 10169.49
accessories as per approved specifications
and drawings
Supply of a modular strip/box seal joint
assembly comprising of edge beams, central
beam, 2 modules chloroprene seal, anchorage
805 0984 elements, support and control system, all m 4745.76 4745.76
steel sections protected against corrision and
installed by the manufacturer or his authorised
representative.
Supply of a modular/box/box seal joint
assembly containing 3 modules/cells and
comprising of edge beams, two central beams,
806 0985 chloroprene seal, anchorage elements, m 5805.08 5805.08
support and control system, all steel sections
protected against corrosion and installed by the
manufacturer or his authorised representative.
807 0986 LDO L 40.00 40.00
808 0987 Trailor 30 Tonne capacity hr Deleted Deleted
809 0990 Farmyard manure cum 170.00 170.00
810 0991 Seeds Kgs. 140.00 140.00
811 0992 Jute netting Sqm 13.33 13.33
li
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
812 0994 Doob grass Kgs. 30.00 30.00
813 0997 Accelerator compound for guniting Kgs. 16.95 16.95
814 0998 Wire mess 50mm x 50mm size of 3mm wire Kgs. 33.90 33.90
815 1101 Sodium vapour lamp - 250 watt Each 1107.00 1107.00
Pre - packed ploymer concrete based on
816 1502 epoxy system complete with curing compound, Kgs. 10.17 10.17
intiator and promoter
817 1505 Quick setting compound Kgs. 127.12 127.12
818 1507 Acrylic polymer bonding coat L 338.98 338.98
Pre-packed cement based ploymer mortar of
819 1508 Kgs. 169.49 169.49
strength 45 Mpa at 28 days
Epoxy resin with pot life not less than 60-90
820 1509 minutes and satisfying testing as per clause Kgs. 483.05 483.05
2800.3.9
821 1514 bearing Neoprene No. 1762.71 1762.71
Separation membrane of impermeable plastic
822 1521 Sq.cm 3.39 3.39
sheeting 125 micron thick
Pre-moulded joint filler, 25mm thick for
823 1522 Sq.cm 5.93 5.93
expansion joint
824 1523 Joint sealant Kgs. 152.54 152.54
825 1524 Sealant Primar Kgs. 127.12 127.12
826 1525 Curing compound L 194.92 194.92
Super plasticizer admixture IS marked as per
827 1526 Kgs. 59.32 59.32
9-103-1999 at 0.5% by wt. of cement
828 1552 Collar for AC pipe (average) Nos, 55.08 55.08
Elastomeric bearing assembly consting
of 7 layers of elastomer bonded to 6 nos.
829 1555 reinforcing steel laminates by the process of Nos. 8533.90 8533.90
vulcanisation, complete with all components as
per drawings and technical specifications.
Pot type bearing consisting of a metal piston
supported by a disc,PTFE pads providing
sliding surfaces against stainless steel mating
830 1556 together with cast steel assemblies/ fabricated Nos. 68220.34 68220.34
structural steel assemblies duly painted with all
components as per clause 2006 and complete
as per drawing and technical specifications.
831 547 Expanded metal 12.5 mm to 25 mm -14 G Sqm 254.24 254.24
lii
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
832 549 Weldmesh 75 x 50mm of 6g x 10g Sqm 186.14 186.14
833 552 Pesticide L 250.00 250.00
834 553 Granite slabs 7.5 cm to 8 cm thick sqm. 254.24 254.24
835 557 Guard stones 700 mm X 200 mm X 200 mm Nos. Deleted Deleted
836 559 15 mm bolt Nos. 7.63 7.63
837 560 60 x 60 x10 Guage sq.plate washer Kgs. 33.05 33.05
838 570 Sealant Kgs. 97.46 97.46
839 563 PVC Storage Tank L 4.24 4.24
840 564 12x12 guage GI wire 100 mtr at Ts. 8.00/m m 10.17 10.17
841 574 Steel Helmet and Cushion block Kgs. 50.85 50.85
842 0930 Geonets Sqm 55.08 55.08
843 0931 Geomembrane Sqm 55.08 55.08
844 0932 Geotextile Sqm 55.08 55.08
845 2001 Carbon electrodes cc 0.42 0.42
846 2004 Screws 3.5" Nos. 3.39 3.39
847 2005 Screws 1.75" Nos. 1.69 1.69
Latch, Pivot, Locking arrangements, SS door
848 2013 Set 7203.39 7203.39
rails etc for glass doors
849 2023 Cast iron ornamental design Nos 67.80 67.80
850 2024 Cast iron arrows No 67.80 67.80
851 2025 Expansion bolt No 21.19 21.19
852 2052 Coconut Broom stick No. 38.10 38.10
853 2053 Bombay broom stick No. 52.38 52.38
854 2054 Squeezer / wiper / rubber brushes No. 76.27 76.27
855 2055 Coir brushes No. 28.57 28.57
856 2056 Bamboo baskets No. 95.24 95.24
857 2057 Plastic buckets 20 L capacity No. 101.69 101.69
858 2058 Trollies No. 1355.93 1355.93
859 2064 Cobble stone 65mm thick Sqm 323.81 323.81
860 2065 Cobble stone 80mm thick Sqm 447.62 447.62
861 2072 Welding rods Nos 4.76 4.76
liii
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
862 2037 Ball beaing hinges heavy duty Nos. 237.29 237.29
863 2041 G.I. Coated expansion bolts Nos. 29.66 29.66
864 2048 Ball Joints Kgs 152.54 152.54
865 2049 Design-Trowel Nos. 46.61 46.61
866 2059 Hose pipe 30m length No. 703.39 703.39
867 2061 Plastic Mug Each 25.42 25.42
868 2063 Bleaching Powder Kgs 67.80 67.80
869 2066 Bronze multiwall polycorbonate G.E. make Kgs 1016.95 1016.95
870 2070 Sealent taps Joint 5.08 5.08
871 2080 Mop stick - alluminium No. 101.69 101.69
872 2082 Disposable garbage bags size 0.9m x 1.5m Each 9.32 9.32
873 2087 RBI Grade 81 Tonne 27118.64 27118.64
874 2088 Safe N Easy/Equivalent Bio-degradable L 415.25 415.25
875 2093 Polymeric expansion joints filler - 12mm thick Sqm 457.63 457.63
876 2094 Polymeric expansion joints filler - 18mm thick Sqm 661.86 661.86
877 2095 Polymeric expansion joints filler - 22mm thick Sqm 916.10 916.10
878 2102 Crystallisation liquid Kgs 127.12 127.12
879 2103 Isoproof Kgs 254.24 254.24
880 2104 Acrylic Kgs 169.49 169.49
881 2105 FCM Kgs 59.32 59.32
882 2106 Non woven geo textile Kgs 80.95 80.95
883 2107 Polysulphide /acrylic sealant Kgs 262.71 262.71
884 2112 Empty Sand / cement bag No. 2.54 2.54
885 9001 Gulty Trap No. 25.42 25.42
886 2097 5mm Semi finished PVC Sheet Sqm 432.20 432.20
887 3001 PVC Pipes 10KG/Sqm 90mm outerdia M 296.61 296.61
888 3002 PVC Pipes 10KG/Sqcm 110mm outerdia M 432.20 432.20
889 3003 PVC Pipes 10KG/Sqcm 140mm outerdia M 728.81 728.81
890 3004 PVC Pipes 10KG/Sqcm 160mm outerdia M 932.20 932.20
891 3005 PVC Pipes 10KG/Sqcm 180mm outerdia M 1186.44 1186.44
892 3006 PVC Pipes 10KG/Sqcm 200mm outerdia M 1440.68 1440.68
Liv
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
893 3007 PVC Pipes 10KG/Sqcm 225mm outerdia M 1779.66 1779.66
894 3008 PVC Pipes 10KG/Sqcm 250mm outerdia M 2203.39 2203.39
895 3009 PVC Pipes 10KG/Sqcm 280mm outerdia M 2796.61 2796.61
896 3010 PVC Pipes 10KG/Sqcm 315mm outerdia M 3559.32 3559.32
897 3022 Water less urinal of size 328x319x598mm Each 18644.07 18644.07
898 2203 Galvanised Steel 105 x 50 mm M 177.97 177.97
899 2204 Galvanised Steel 20 x 47 mm M 88.98 88.98
900 2205 Galvanised Steel 58 x 36 mm M 135.59 135.59
901 2206 Galvanised Steel 22 x 20 (FW 66 mm) M 38.14 38.14
902 2207 Galvanised "C" Section 12 x 3 M 16.95 16.95
903 2208 Float Glass 5 mm Thick Sqm 398.31 398.31
904 2212 M.S. Grill Powder Coated 100 mm Pitch Sqm 593.22 593.22
905 221 Galvanised "C" Section 18 x 7 (FW 33 mm) M 18.64 18.64
906 2209 Galvanised Steel20 x 24 (FW 33 mm) M 39.83 39.83
907 2213 Galvanised Steel 90 x 50 mm M 169.49 169.49
908 2214 TMT Bars Fe 500 M 45645.00 45645.00
909 2215 TMT Bars Fe 550 M 46145.00 46145.00
910 2216 Maranthi Wood cum 30677.97 30677.97
911 2217 Galvanised Steel 70 x 55 mm M 163.56 163.56
912 2218 Galvanised Flymesh Section 20 x 40 mm M 110.17 110.17
913 2219 Galvanised Steel Section 48 x 25 mm M 148.31 148.31
914 2220 Galvanised Steel (Glass Beading ) 12 x 12 mm M 0.85 0.85
915 2221 Mesh (SS 304 Grade) Sqm 317.80 317.80
916 2222 Galvanised Steel 72 x 55 mm M 165.25 165.25
917 2223 Galvanised Steel Section 48 x 50 mm M 152.54 152.54
918 2224 Galvanised Steel Section 46 x 52 mm M 148.31 148.31
919 2225 Galvanised Steel Section 46 x 46 mm M 139.83 139.83
920 2226 Galvanised Beading Section 18 x 25 mm M 52.54 52.54
921 2227 Fly ash bricks of size 60 x 20 x 15 cm 100 No. 508.47 508.47
922 2228 White cement based putty Kgs 22.03 22.03
Vitrifed tiles - 10 mm thick double charged,
923 Sqm 847.46 847.46
nano technology size 800mmx800mm
Lv
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
Vitrifed tiles - 10 mm thick double charged,
924 Sqm 1694.92 1694.92
nano technology size 1200mmx600mm
Light weight Concrete (Autoclaved aereated
925 3023 Each 84.75 84.75
cellular)Blocks of size 60 x 20 x 15 cm
926 Solid blocks concrete 40 x 15 x 20 cms 100 No. 2966.10 2966.10
Light weight Concrete (Autoclaved aereated
927 3024 Each 50.85 50.85
cellular)Blocks of size 60 x 20 x 10 cm
Light weight Concrete (Autoclaved aereated
928 3025 Each 101.69 101.69
cellular)Blocks of size 60 x 20 x 20 cm
929 3027 Polymer modified stucco mortar Kg 19.49 19.49
930 Sal wood (Red) cum 36352.00 35465.00
931 2229 Precast Hallow blocks (40x20x20 cm) grade 50 100 No. 4237.29 4237.29
Solid blocks concrete (40 x 15 x 20 cms) grade
932 2280 100 No. 4100.00 4100.00
35
933 580 Raw-silk granite 20mm thick Sqm 1066.00 1101.69
934 Table top 25mm thick PLPB with edge banding Sqm 1610.17 1610.17
935 75mm thick MS CRCA partition with PLPB tiles Sqm 2542.37 2542.37
25 mm thick PLPB separator with edge
936 Sqm 1610.17 1610.17
handing
937 L clamps No. 4.24 4.24
938 Nut and bolt No. 3.39 3.39
939 Separator and D-Brackets No. 25.42 25.42
940 Cantilever Brackets No. 80.51 80.51
941 End table hode on Bracket No. 29.66 29.66
942 Corner Hook on Bracket No. 29.66 29.66
943 25mm thich front modesty Sqm 1525.42 1525.42
944 25mm thich legs sqm 1822.03 1822.03
945 Minifix housing No. 4.00 4.00
946 Wooden dowels M8x40 No. 1.50 1.50
947 M6 screw leg No. 5.08 5.08
948 M6 Insert No. 4.24 4.24
949 64 mm dia grommet cap No. 8.47 8.47
950 50mm thick glass wool Sqm 139.83 139.83
951 Wood screws No. 4.00 4.00
Lvi
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
952 Ahro tape/press putty Bundle 252.54 252.54
953 Lipping 1”x ¼ “ Rmt 20.59 20.59
954 Etching of glass Sqm 1144.07 1144.07
955 Patch fittings No. 1186.44 1186.44
956 Pivot No. 296.61 296.61
957 Floor machine No. 5508.47 5508.47
958 Locking system No. 847.46 847.46
959 SS Door rails Set 635.59 635.59
960 25mm treated commercial black board Sqm 1610.17 1610.17
961 Teak wood balls No. 169.49 169.49
962 19mm block board vinyl bonded w/p 7’x3’ Sqm 974.58 974.58
963 Stainless steel 304 grade Each 39.36 39.36
964 Stainless steel 304 grade tower bolt plate Each 28.70 28.70
965 Stainless steel 304 grade door lock plate Each 36.08 36.08
966 Stainless steel 304 grade aldrop pipe Each 32.80 32.80
967 MS Vertical bolt of size 1/2 x2 Each 28.70 28.70
968 MS Special square nut 4mm Each 8.20 8.20
969 4/15 CSK 304 grade stainless steel screws Each 4.10 4.10
970 4mm stainless steel hexagonal grade nut Each 2.46 2.46
PP connector for fixing horizontal and vertical
971 Each 24.60 24.60
members 35mm dia length
Polyurethane foam (PUF) slab 40mm thick
972 1 m² 338.98 338.98
average with PU slab density 36+/-2 kg/m³
Polyurethane foam (PUF) slab 50mm thick
973 25 m² 559.32 559.32
average with PU slab density 36+/-2 kg/m³
Polyurethane foam (PUF) slab 60mm thick
974 26 m² 796.61 796.61
average with PU slab density 36+/-2 kg/m³
Polyurethane foam (PUF) slab 70mm thick
975 27 m² 1028.81 1028.81
average with PU slab density 36+/-2 kg/m³
Polymerized plaster reinforced with glass fibre
976 2 m² 254.24 254.24
mesh
977 3 Epoxy based bonding adhesive Kgs 735.59 735.59
Polyurethane foam (PUF) spray 40mm thick
978 4 m² 580.51 580.51
average with PU slab density 35+/-5 kg/m³
Lvii
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
Polyurethane foam (PUF) spray 50mm thick
979 5 m² 725.42 725.42
average with PU slab density 35+/-5 kg/m³
25mm thick extruded polystyrene (XPS)
980 6 m² 241.53 241.53
thermal insulating boards
50mm thick extruded polystyrene (XPS)
981 7 m² 466.10 466.10
thermal insulating boards
75mm thick extruded polystyrene (XPS)
982 8 m² 720.34 720.34
thermal insulating boards
100mm thick extruded polystyrene (XPS)
983 9 m² 974.58 974.58
thermal insulating boards
12mm thick glass wool with resin bonded slab
984 12 m² 108.47 108.47
density 48kgs/cum
25mm thick glass wool with resin bonded slab
985 13 m² 211.86 211.86
density 48kgs/cum
50mm thick glass wool with resin bonded slab
986 14 m² 300.85 300.85
density 48kgs/cum
25mm thick average resin bonded rock wool
987 15 m² 54.24 54.24
slab having density 36+/-5 kg/cum
40mm thick average resin bonded rock wool
988 16 m² 76.27 76.27
slab having density 36+/-5 kg/cum
50mm thick average resin bonded rock wool
989 17 m² 89.83 89.83
slab having density 36+/-5 kg/cum
65mm thick average resin bonded rock wool
990 18 m² 113.56 113.56
slab having density 36+/-5 kg/cum
75mm thick average resin bonded rock wool
991 19 m² 128.81 128.81
slab having density 36+/-5 kg/cum
100mm thick average resin bonded rock wool
992 20 m² 168.64 168.64
slab having density 36+/-5 kg/cum
60mm thick extruded polystyrene (XPS)
993 22 m² 610.17 610.17
thermal insulating boards
70mm thick extruded polystyrene (XPS)
994 23 m² 703.39 703.39
thermal insulating boards
Polyurethane foam (PUF) spray 60mm thick
995 30 m² 1261.86 1261.86
average with PU foam
Polyurethane foam (PUF) spray 70mm thick
996 31 m² 1577.12 1577.12
average with PU foam
50mm thick thermal insulation of roofing with
997 32 m² 122.88 122.88
expanded polystyrene
LViii
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
70mm thick thermal insulation of roofing with
998 33 m² 182.20 182.20
expanded polystyrene
90mm thick thermal insulation of roofing with
999 34 m² 242.37 242.37
expanded polystyrene
110mm thick thermal insulation of roofing with
1000 35 m² 302.54 302.54
expanded polystyrene
120mm thick thermal insulation of roofing with
1001 36 m² 332.20 332.20
expanded polystyrene
Thermal insulation of roofing with expanded
1002 37 m² 150.85 150.85
polystyrene (50mm thick) with aluminium strips
Thermal insulation of roofing with expanded
1003 38 m² 227.12 227.12
polystyrene (70mm thick) with aluminium strips
Thermal insulation of roofing with expanded
1004 39 m² 281.36 281.36
polystyrene (90mm thick) with aluminium strips
Thermal insulation of roofing with expanded
1005 40 polystyrene (110mm thick) with aluminium m² 358.47 358.47
strips
Thermal insulation of roofing with expanded
1006 41 polystyrene (120mm thick) with aluminium m² 398.31 398.31
strips
25mm thick rock wool with resin bonded slab
1007 45 m² 54.24 54.24
density 48kgs/cum
40mm thick rock wool with resin bonded slab
1008 46 m² 76.27 76.27
density 48kgs/cum
50mm thick rock wool with resin bonded slab
1009 47 m² 89.83 89.83
density 48kgs/cum
65mm thick rock wool with resin bonded slab
1010 48 m² 113.56 113.56
density 48kgs/cum
75mm thick rock wool with resin bonded slab
1011 49 m² 128.81 128.81
density 48kgs/cum
100mm thick rock wool with resin bonded slab
1012 50 m² 168.64 168.64
density 48kgs/cum
1020 Bitumen Emuision(SS-1) T 54791.96 54439.00
1021 Bitumen Emuision(RS-1) T 34354.96 34002.00
1022 Bitumen (S-65) T 36117.96 35940.00
1023 Bitumen (S-90) T 35317.96 35140.00
Aggregate-grading I(40mm nominal
1024 cum 1178.00 1310.00
size)10mm-5mm
Lix
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
aggregate-grading I(40mm nominal
1025 cum 1218.00 1319.00
size)25mm-10mm
aggregate-grading I(40mm nominal size)5mm
1026 cum 1167.00 1200.00
below
1027 stone chips 13.2mm to 5.6mm cum 1040.00 1310.00
Crushed stone chipping of 6.7 mm size 100 per
1028 cum 1177.00 1310.00
cent passing 11.2 mm retained on 2.36 mm
Crushed sand or grit as passing 2.36 mm sieve
1029 cum 1078.00 1700.00
and retained on 180 micron
Crushed stone chipping of 6.7 mm size defined
1030 as 100% passing 9.5 mm sieve and retained Cum 1635.00 1310.00
on 2.36 mm
1031 Polythene sheet 125 micron sqm 1140.00 11.44
1032 Jute rope 12 mm dia m² 11.44 4.76
1033 Bituminous sealant litre 69.49 69.49
1034 Debonding strips m² 162.20 162.20
1035 Polythene sheathing No. 50.84 50.84
1036 Plasticizer litre 59.32 169.49
1037 Curing compound litre 194.92 194.92
1038 Joint filler board sqm 169.49 169.49
Interlocking Concrete Block with 60 mm
1039 sqm 349.22 349.22
thickness
Interlocking Concrete Block with 80 mm
1040 sqm 446.88 446.88
thickness
1041 Edge blocks m 177.95 177.95
1042 RCC pipes NP3 1000 mm dia including collars m 4906.77 4709.04
1043 RCC pipes NP4 1000 mm dia including collars m 6049.43 6049.43
1044 RCC pipes NP4 750 mm dia including collars m 3363.56 3363.56
1045 RCC pipes NP3 500 mm dia including collars m 1985.87 1985.87
1046 RCC pipes NP4 500 mm dia including collars m 2478.18 2478.18
1047 Stone spall Cum 333.33 333.33
Good quality well burnt charcoal for grounding
1048 purpose packed in a non returnable gunny Bag 600.00 600.00
bags of 30 kg each
Lx
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
Good quality Salt for grounding purpose
1049 Bag 275.00 275.00
packed in 50kg gunny bags
MVS CONSUMABLES
1050 Lithium based grease kg 253.00 253.00
1051 Rubber packing kg 117.00 117.00
1052 SAE 40 grade oil ltr 168.00 168.00
1053 Transformer oil litre 57.72 57.72
1054 Cotton waste kg 83.00 83.00
1055 Supply ALUM 1000 Kg 1000 Kg 11500.00 11500.00
PVC Pipes
PVC PIPES OF 4 Kg./Cm2
1056 63mm(0.465) Mtr 57.50 57.50
1057 75mm(0.651) Mtr 82.00 82.00
1058 90mm(0.917) Mtr 116.00 116.00
1059 110mm(1.315) Mtr 167.50 167.50
1060 140mm(2.131) Mtr 279.00 279.00
1061 160mm(2.753) Mtr 369.50 369.50
1062 200mm(4.256) Mtr 584.50 584.50
PVC PIPES OF 6 Kg./Cm2
1063 63mm(0.662) Mtr 84.00 84.00
1064 75mm(0.917) Mtr 118.00 118.00
1065 90mm(1.313) Mtr 170.00 170.00
1066 110mm(1.894) Mtr 249.00 249.00
1067 140mm(3.097) Mtr 413.50 413.50
1068 160mm(3.923) Mtr 535.00 535.00
1069 200mm(6.233) Mtr 855.00 855.00
PVC PIPES OF 8 Kg./Cm2
1070 63mm(0.662) Mtr 124.01 124.01
1071 75mm(0.917) Mtr 177.93 177.93
1072 90mm(1.313) Mtr 251.90 251.90
1073 110mm(1.894) Mtr 376.28 376.28
1074 140mm(3.097) Mtr 621.80 621.80
Lxi
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
1075 160mm(3.923) Mtr 805.31 805.31
1076 200mm(6.233) Mtr 1255.08 1255.08
PVC PIPES OF 10 Kg./Cm2
1077 63mm Mtr 137.50 137.50
1078 75mm Mtr 196.50 196.50
1079 90mm Mtr 282.50 282.50
1080 110mm Mtr 422.50 422.50
1081 140mm Mtr 684.00 684.00
1082 160mm Mtr 896.00 896.00
1083 200mm Mtr 1439.50 1439.50
DI PIPES OF K-7
1084 K-7 100 Mtr 831.00 831.00
1085 K-7150 Mtr 1205.00 1205.00
1086 K-7 200 Mtr 1689.00 1689.00
1087 K-7 250 Mtr 2222.00 2222.00
1088 K-7 300 Mtr 2807.00 2807.00
1089 K-7 350 Mtr 3502.00 3502.00
1090 K-7 400 Mtr 4190.00 4190.00
1091 K-7 450 Mtr 4933.00 4933.00
1092 K-7 500 Mtr 5808.00 5808.00
1093 K-7 600 Mtr 7669.00 7669.00
1094 K-7 700 Mtr 9463.00 9463.00
1095 K-7 750 Mtr 10903.00 10903.00
1096 K-7 800 Mtr 12194.00 12194.00
1097 K-7 900 Mtr 14808.00 14808.00
1098 K-7 1000 Mtr 18442.00 18442.00
DI PIPES OF K-9
1099 K-9 100 Mtr 960.00 960.00
1100 K-9 150 Mtr 1389.00 1389.00
1101 K-9 200 Mtr 1998.00 1998.00
1102 K-9 250 Mtr 2679.00 2679.00
Lxii
Sl. Code Bare Rate for 2019-20
Name Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
1103 K-9 300 Mtr 3386.00 3386.00
1104 K-9 350 Mtr 4259.00 4259.00
1105 K-9 400 Mtr 5103.00 5103.00
1106 K-9 450 Mtr 6083.00 6083.00
1107 K-9 500 Mtr 7069.00 7069.00
1108 K-9 600 Mtr 9330.00 9330.00
1109 K-9 700 Mtr 10696.00 10696.00
1110 K-9 750 Mtr 11989.00 11989.00
1111 K-9 800 Mtr 13278.00 13278.00
1112 K-9 900 Mtr 16111.00 16111.00
1113 K-9 1000 Mtr 19223.00 19223.00
1114 K-9 1100 Mtr 23663.00 23663.00
1115 K-9 1200 Mtr 28975.00 28975.00
LXiii
HIRE CHARGES OF MACHINERIES
Sl. Code Bare Rate for 2019-20
Unit
No. No. (Excluding G.S.T)
Zone-A Zone-B
1 2 3 4 5 6
1 1001 Mixer (concrete) - 1 cum Capacity Day 1356.00 1356.00
2 1002 Vibrator (with needle) Day 297.00 297.00
3 1004 Bitumen Boiler Oil Fired - 1500 ltr. Capacity hr 133.00 133.00
4 1005 Mini Mix Plant 6/10 TPH Day 1356.00 1356.00
5 1006 Wheel Burrows Day 13.00 13.00
6 1007 Hand Mixer Day 136.00 136.00
7 1008 Farm Tractor Day 1915.00 1915.00
8 1010 Mechanical Paver finisher 100 TPH capacity Day 5966.00 5966.00
9 1011 Tipper Day 1708.00 1708.00
10 1012 Front End Loader 1 cum bucket capacity hr 593.00 593.00
11 1013 Hot Mix Plant 40/60 TPH Day 65220.00 65220.00
12 1014 Vibrator Roller Day 9797.00 9797.00
13 1015 Hire charges for Tractor mounted or mini dozer Day 2034.00 2034.00
14 1016 Pneumatic Tyre Roller (8 Tonnes) - 25 cum / hr Day 7010.00 7010.00
15 1018 Motor Grader BEML Day 12881.00 12881.00
16 1019 Motorised scrapper Day 1288.00 1288.00
17 1020 Wheeled Dozer D 50 BEML Day 11864.00 11864.00
Hydraulic Control Paver finisher (with
18 1022 Day 15729.00 15729.00
Electronic Sensor) 100 TPH
19 1023 Tractor 40 HP Day 1288.00 1288.00
20 1024 Tractor 50 HP Day 2129.00 2129.00
21 1028 Wet Mix Plant 60 TPH/ Pug Mill hr 960.00 960.00
22 1030 Air Compressor Day 1953.00 1953.00
23 1031 J.C.B. Excavator Day 5695.00 5695.00
24 1032 Water Tanker / Day Day 412.00 412.00
Road Roller 8-10 T ( 425Cum/day soil
25 1035 hr 367.00 367.00
compacted)
Front end loader (1Cum) Turnover 120 Cum /
26 1036 hr 593.00 593.00
day when used with hot mix plant
27 1037 Vibratory Roller 8 Tonne hr 1102.00 1102.00
28 1038 Pneumatic Road Roller hr 876.00 876.00
LXiv
29 1039 Tandem Road Roller - 30 cum / hr hr 876.00 876.00
30 1040 Motor Grader 3.35 meter blade hr 1763.00 1763.00
31 1041 Motorised scraper (950 Cum / day) hr 161.00 161.00
32 1042 Wheeled Dozer (D50 BEML) hr 1356.00 1356.00
33 1043 Hot mix Plant ( 6-10TPH) 8T /hr capacity hr 318.00 318.00
34 1045 Hot mix plant 40-60 TPH Capacity hr 8153.00 8153.00
35 1046 Paver finisher Mechanical 100 TPH capacity hr 746.00 746.00
Paver Finisher Hydrostatic with sensor control
36 1047 hr 1966.00 1966.00
100 TPH
37 1048 Tractor 40 HP/hr hr 161.00 161.00
38 1049 Tractor 50 HP/hr hr 266.00 266.00
39 1055 Air compressor (170 Cfm) hr 246.00 246.00
40 1056 Hydraulic Excavator 1 cum bucket hr 958.00 958.00
41 1057 Water Tanker hr 52.00 52.00
42 1058 Tractor mounted dozer hr 318.00 318.00
43 1059 Mixer (concrete small used in culvert) hr 42.00 42.00
44 1060 Vibrator hr 42.00 42.00
45 1063 Concrete pump 45 & 30 cum capacity hr 164.00 164.00
46 1064 nsit mixer 4.5 cum/hour hr 627.00 627.00
47 1065 Batching Plant (30 cum/hour) hr 1568.00 1568.00
48 1066 Batching Plant (15- 20 cum/hour) hr 1312.00 1312.00
HOM for pumping water 3.5 KL / hr capacity
49 1069 hr 42.00 42.00
pump
50 1070 HOM of Vibrator Day 169.00 169.00
51 1071 HOM of welding and grinding machine Day 339.00 339.00
52 1073 HOM of cutting and grinding machine Day 339.00 339.00
53 1074 HOM of cutting and grinding machine (hr) hr 42.00 42.00
54 1075 HOM of Machinaries for planing cum 34.00 34.00
55 1076 HOM of polishing machine Day 169.00 169.00
56 1077 HOM of Blow lamp Day 42.00 42.00
57 1078 HOM of pilling rig with Bentonite pump, etc. Day 32169.00 32169.00
58 1079 HOM of pump 23 KW Day 678.00 678.00
59 1080 HOM of pump 9.5 KW Day 424.00 424.00
HOM of pneumatic hammer and pavement
60 1081 hr 42.00 42.00
braker
61 1082 HOM of screed vibrator hr 42.00 42.00
LXv
62 1083 Mastic cooker Day 380.00 380.00
63 1084 HOM of gunniting equipment Day 339.00 339.00
64 1085 HOM of drilling equipment Day 42.00 42.00
65 1086 Plate vibrator having 3 Ton compaction force Day 254.00 254.00
66 1087 Crane charges Day 3390.00 3390.00
67 1088 Grout pump, agitator Day 254.00 254.00
HOM of 7.5 cft capacity concrete mixing
68 1089 Day 1220.00 1220.00
machine
69 1092 Crane Charges/hr hr 424.00 424.00
70 1093 HOM of Machinery jack for prestressing hr 77.00 77.00
71 1094 HOM of spraying machine Day 64.00 64.00
72 1095 Crawlar Tractor hr 169.00 169.00
73 1096 Tipper-5 cum hr 203.00 203.00
74 1097 Smooth Wheeled Roller hr 327.00 327.00
75 1098 Rotavator - 25 cum / hr hr 12.00 12.00
76 1099 Ripper - 60 cum / hr hr 21.00 21.00
77 1301 Mechanical Broom Hydraulic hr 262.00 262.00
78 1302 Bitumen Pressure Distributor hr 754.00 754.00
79 1303 Emulsion Pressure Distrbutor hr 564.00 564.00
80 1304 Hotmix Plant - 120 TPH capacity hr 15763.00 15763.00
81 1305 Hotmix Plant - 100 TPH capacity hr 11653.00 11653.00
82 1306 Vacuum dewatering Sq.mtr 34.00 34.00
83 1307 Hydraulic Chip Spreader hr 1695.00 1695.00
84 1308 Pot-hole Repair Machine hr 722.00 722.00
85 1309 GSB Plant 50 cum hr 764.00 764.00
86 1311 Cranes 80 tonnes hr 823.00 823.00
87 1312 Cranes 35 tonnes hr 548.00 548.00
88 1313 Cranes 3 tonnes hr 229.00 229.00
89 1314 Concrete Bucket - 1 cum capacity hr 10.00 10.00
90 1315 Kerb Casting Machine hr 237.00 237.00
91 1317 Piling Rig with Bantonite Pump hr 4021.00 4021.00
92 1321 Generator 100 KVA hr 534.00 534.00
93 1322 Generator 33 KVA hr 251.00 251.00
94 1324 Road Marking Machine hr 57.00 57.00
95 1325 Mobile Slurry Seal Equipment hr 680.00 680.00
LXVi
96 135 Drilling Equipment (Tractor mounted) Day 1627.00 1627.00
Integrated stone crusher of 200 TPH including
97 1326 hr 11144.00 11144.00
belt conveyor vibrating screens
98 1327 Hot Mix Plant 20 to 40 TPH Capacity hr 3881.00 3881.00
99 1501 Grout pump with agitator & accessories hr 678.00 678.00
100 1503 Epoxy Injection gun hr 233.00 233.00
101 1506 Shotcreteing equipment hr 85.00 85.00
102 1511 Stressing jack with pump hr 127.00 127.00
Hire charges for jack of 40 tonne lifting
103 1515 No. 2797.00 2797.00
capacity
104 1517 Cement concrete batch mix at 75 cum/ hr hr 1525.00 1525.00
105 1527 Road sweeper at 1250 sqm/hr hr 234.00 234.00
Cement concrete batch mix at 175 cum/hor
106 1528 hr 6698.00 6698.00
(effective output)
107 1529 Electric generator set 250 KVA hr 636.00 636.00
108 1530 Slip form paver with electronic sensor hr 1525.00 1525.00
109 1532 Concrete joint cutting machine hr 1326.00 1326.00
Batch type cold mixing plant 100 - 120 TPH
110 1535 capacity producing an average output of 75 hr 6780.00 6780.00
tonne per hour
111 1550 Motorised barge of 20 tonne capacity hr 424.00 424.00
112 1551 Boat to carry at least 20 persons hr 93.00 93.00
113 902 base mix plant (pug mill) hr 960.00 960.00
Transit mixer 4 cum capacity for lead beyond
114 965 t.km 2.00 2.00
1 km
Usage of plant & equipment for pneumatic
115 970 hr 339.00 339.00
method of well sinking
Air Compressor 250 cfm with pneumatic
116 996 hr 218.00 218.00
breaker/ jack hammer along with accessories
Compressor with guniting equipment along
117 999 hr 218.00 218.00
with accessories
118 137 Concrete paver finisher with 40 HP Motor hr 1839.00 1839.00
119 Bitumen emulsion pressure distributor hr 564.00 564.00
Three wheel 80-100 kN static roller for intial
120 hr 367.00 367.00
break down rolling, final and finishing rolling
121 Concrete joint cutting machine hr 165.75 211.00
122 Water tanker 6 kl capacity hr 254.24 255.00
LXVii
STATEMENT SHOWING THE LABOUR RATES FOR ZONE-A & ZONE-B FOR THE YEAR 2019-20
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
ZONE CATEGORIZATION
ZONE I :: Bruhat Bengaluru Mahanagara Palike, Other Corporation areas of the state & their Agglomeration Areas.
ZONE II :: All District Centres of the state other than mentioned in Zone I
ZONE III :: Other than Places mentioned in Zone I & II
ZONE - I ZONE - II ZONE - III REMARKS
Sl.
Particulars Basic DA Total Basic DA Total Basic DA Total Equivalent Cadre
No.
Diploma Holder in
1 675.00 61.20 736.20 675.00 61.20 736.20 675.00 61.20 736.20 Equivalent Cadre
Engineering
2 Graduate in Engineering 873.00 61.20 934.20 873.00 61.20 934.20 873.00 61.20 934.20 Equivalent Cadre
3 I.T.I. Certificates Holder 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Job Oriented Diploma
4 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Holder
5 Mazdoor Heavy 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
6 Mazdoor Light/Bisti 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
LXVIii
7 Stone Wadder (Heavy) 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
8 Stone Wadder (Light) 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
Stone revetment builder/Hort
9 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Supr/Gauge
10 Scavenger 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
11 Sweeper 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
12 Mason Class I (with tools) 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
13 Mason Class II(with tools) 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Carpenter Class I (with
14 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
tools)
15 Carpenter Class II ( - do -) 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
16 Carpenter Assistant 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
17 Stone Dresser (with tools) 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
18 Painter Class I 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
19 Painter Class II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
STATEMENT SHOWING THE LABOUR RATES FOR ZONE-A & ZONE-B FOR THE YEAR 2019-20
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
ZONE CATEGORIZATION
ZONE I :: Bruhat Bengaluru Mahanagara Palike, Other Corporation areas of the state & their Agglomeration Areas.
ZONE II :: All District Centres of the state other than mentioned in Zone I
ZONE III :: Other than Places mentioned in Zone I & II
ZONE - I ZONE - II ZONE - III REMARKS
Sl.
Particulars Basic DA Total Basic DA Total Basic DA Total Equivalent Cadre
No.
20 White/Colour Washer 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Wagon Driller/Pnematic
21 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
tamper
22 Stone Chistler Calss I 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
23 Stone Chistler Class II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
24 Floor Polisher/Tile Layer 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
25 a) Bar Bender/Welder I 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
LXix
26 b) Bar bender/Welder II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
27 Driver for light vehicle 421.00 61.20 482.20 410.00 61.20 471.20 375.00 61.20 436.20 Equivalent Cadre
28 Driver for heavy vehicle 449.00 61.20 510.20 437.00 61.20 498.20 407.00 61.20 468.20 Equivalent Cadre
29 Driver for road rollers 449.00 61.20 510.20 437.00 61.20 498.20 407.00 61.20 468.20 Equivalent Cadre
30 Manual Driller 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Science Graduate employed
31 675.00 61.20 736.20 675.00 61.20 736.20 675.00 61.20 736.20 Equivalent Cadre
in Laboratory
Arts/Commerce Graduate
32 675.00 61.20 736.20 675.00 61.20 736.20 675.00 61.20 736.20 Equivalent Cadre
employed in Office
33 Licenced Blaster 425.00 61.20 486.20 415.00 61.20 476.20 390.00 61.20 451.20 Equivalent Cadre
34 Blaster Helper 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
35 Hammer man/Stone Breaker 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
36 Licenced Plumber with tools 425.00 61.20 486.20 415.00 61.20 476.20 390.00 61.20 451.20 Equivalent Cadre
Licenced electri Wiremen
37 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
fitter with tools
38 Lineman 425.00 61.20 486.20 415.00 61.20 476.20 390.00 61.20 451.20 Equivalent Cadre
STATEMENT SHOWING THE LABOUR RATES FOR ZONE-A & ZONE-B FOR THE YEAR 2019-20
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
ZONE CATEGORIZATION
ZONE I :: Bruhat Bengaluru Mahanagara Palike, Other Corporation areas of the state & their Agglomeration Areas.
ZONE II :: All District Centres of the state other than mentioned in Zone I
ZONE III :: Other than Places mentioned in Zone I & II
ZONE - I ZONE - II ZONE - III REMARKS
Sl.
Particulars Basic DA Total Basic DA Total Basic DA Total Equivalent Cadre
No.
Auto Electrician/ Mechanic
39 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Grade I
Auto Electrician/Mechanic
40 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Grade II
41 Gas or Electric Welder 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Telephone Operator/
42 465.00 61.20 526.20 455.00 61.20 516.20 425.00 61.20 486.20 Equivalent Cadre
Lineman
43 Telephone Mechanic 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
LXx
44 Telephone Attender 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
45 Wireless Operator 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
46 Fitter Class I 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
47 Fitter Class II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Mechanic Class I/Mechanic
48 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
HmP Grade I/EME Grade I
Mechanic Class II/Mechanic
49 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
HmP Grade I/EME Grade III
Operator/Heavy/CC Mixer/
50 Generator/(Compressor) 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Stone Crusher/Motor Mill
Operator/Heavy/CC Mixer/
51 Generator/(Compressor) 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Stone Crusher/Motor Mill
Operator Light/Pump
52 Vibrator/ Grinder/Air 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
conditioner
STATEMENT SHOWING THE LABOUR RATES FOR ZONE-A & ZONE-B FOR THE YEAR 2019-20
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
ZONE CATEGORIZATION
ZONE I :: Bruhat Bengaluru Mahanagara Palike, Other Corporation areas of the state & their Agglomeration Areas.
ZONE II :: All District Centres of the state other than mentioned in Zone I
ZONE III :: Other than Places mentioned in Zone I & II
ZONE - I ZONE - II ZONE - III REMARKS
Sl.
Particulars Basic DA Total Basic DA Total Basic DA Total Equivalent Cadre
No.
53 Turner 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
54 Tinker (With tools) 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
55 Cleaner 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
56 Crest Gate operator 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
57 Gate Operator for Dam 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
58 Sluice gate operator for Dam 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
59 Sluiceman for canals 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
LXXi
60 Foreman Grade I 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
61 Foreman Grade II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
EME Operator Grade I /
62 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Shoval/Scrapper/Crane
63 EME operator Grade II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Divers with Helmet working
64 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
under Pneumatic pressure
65 Divers (ordinary) 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
66 Well Sinker 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
67 Stenographer (Senior) 465.00 61.20 526.20 455.00 61.20 516.20 425.00 61.20 486.20 Equivalent Cadre
68 Stenographer (Junior) DELETED Equivalent Cadre
69 Typist (Senior) 465.00 61.20 526.20 455.00 61.20 516.20 425.00 61.20 486.20 Equivalent Cadre
70 Typist (Junior) 460.00 61.20 521.20 445.00 61.20 506.20 415.00 61.20 476.20 Equivalent Cadre
71 Lift operator 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
72 Laboratory Attender 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
STATEMENT SHOWING THE LABOUR RATES FOR ZONE-A & ZONE-B FOR THE YEAR 2019-20
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
ZONE CATEGORIZATION
ZONE I :: Bruhat Bengaluru Mahanagara Palike, Other Corporation areas of the state & their Agglomeration Areas.
ZONE II :: All District Centres of the state other than mentioned in Zone I
ZONE III :: Other than Places mentioned in Zone I & II
ZONE - I ZONE - II ZONE - III REMARKS
Sl.
Particulars Basic DA Total Basic DA Total Basic DA Total Equivalent Cadre
No.
73 Watchman/Peon 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
74 Gurkha Watchman 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
Cartman with cart and single
75 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
bullock
Cartman with cart and
76 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
double bullock
Hot asphalt spraying
77 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
mazdoor
LXXIi
Hot asphalt premix spraying
78 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
mazdoor
79 Spun pipe moulder Class I 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
80 Spun pipe moulder Class II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
81 Patkary/Sowdy/Neerganti 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Horticultural Assistant
82 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
(Trained)
Boatman (Licenced) with
83 425.00 61.20 486.20 415.00 61.20 476.20 390.00 61.20 451.20 Equivalent Cadre
boat
84 Boatman 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
85 Guage Reader 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
86 Sweeper 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
87 Chawalies 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
88 Navaganies 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
89 Brick layer Class I /Moulder 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
STATEMENT SHOWING THE LABOUR RATES FOR ZONE-A & ZONE-B FOR THE YEAR 2019-20
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
ZONE CATEGORIZATION
ZONE I :: Bruhat Bengaluru Mahanagara Palike, Other Corporation areas of the state & their Agglomeration Areas.
ZONE II :: All District Centres of the state other than mentioned in Zone I
ZONE III :: Other than Places mentioned in Zone I & II
ZONE - I ZONE - II ZONE - III REMARKS
Sl.
Particulars Basic DA Total Basic DA Total Basic DA Total Equivalent Cadre
No.
90 Brick Layer Class II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
91 Fireman 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
92 Gangman/Survey/mazdoor 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
93 Wood Sawer (with tools) 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
94 Compounder/Pharmasist 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
95 Compunder (SSLC) 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
96 School Bus Conductor 425.00 61.20 486.20 415.00 61.20 476.20 390.00 61.20 451.20 Equivalent Cadre
LXXIIi
97 I.B. Maity 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
98 I.B. Waterman 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
99 Photographer 465.00 61.20 526.20 455.00 61.20 516.20 425.00 61.20 486.20 Equivalent Cadre
100 Dhobi 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
101 Artisan Chistler 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
102 Artisan Mason 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
103 Artisan Helper 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
104 Artisan fitter 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
105 Assistant Mechanic 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
106 Blacksmith Grade I 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
107 Blacksmith Grade II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
108 Cook 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Drilling/Grouting Operator
109 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Gr.I
STATEMENT SHOWING THE LABOUR RATES FOR ZONE-A & ZONE-B FOR THE YEAR 2019-20
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
ZONE CATEGORIZATION
ZONE I :: Bruhat Bengaluru Mahanagara Palike, Other Corporation areas of the state & their Agglomeration Areas.
ZONE II :: All District Centres of the state other than mentioned in Zone I
ZONE III :: Other than Places mentioned in Zone I & II
ZONE - I ZONE - II ZONE - III REMARKS
Sl.
Particulars Basic DA Total Basic DA Total Basic DA Total Equivalent Cadre
No.
Drilling/Grouting operator
110 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Gr.II
Foreman - heavy machinery
111 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
work shop (General)
112 Fabricator 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Field Asst. spraying
attender, Plant propagators,
113 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Prunders with Horticulture
LXXIv
Dept. certificate
114 Mali (Gardner) trained 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Mali (Gardner) untrained
115 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
heavy
Mali (Gardner) Untrained
116 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
light
117 Literate Assistant (Graduate) 675.00 61.20 736.20 675.00 61.20 736.20 675.00 61.20 736.20 Equivalent Cadre
Literate Assistant (SSLC
118 425.00 61.20 486.20 415.00 61.20 476.20 390.00 61.20 451.20 Equivalent Cadre
passed)
Literate Assistant (Non
119 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
SSLC)
120 Hammer Mazdoor 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
121 Helper (Electrical) 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
122 Medicine sprayer - Malnad 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
123 Medicine sprayer - Maidan 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
124 Jack Hammer Driller 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
STATEMENT SHOWING THE LABOUR RATES FOR ZONE-A & ZONE-B FOR THE YEAR 2019-20
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
ZONE CATEGORIZATION
ZONE I :: Bruhat Bengaluru Mahanagara Palike, Other Corporation areas of the state & their Agglomeration Areas.
ZONE II :: All District Centres of the state other than mentioned in Zone I
ZONE III :: Other than Places mentioned in Zone I & II
ZONE - I ZONE - II ZONE - III REMARKS
Sl.
Particulars Basic DA Total Basic DA Total Basic DA Total Equivalent Cadre
No.
125 Laboratory Asst. (Graduate) 675.00 61.20 736.20 675.00 61.20 736.20 675.00 61.20 736.20 Equivalent Cadre
Laboratory Asst. (SSLC
126 425.00 61.20 486.20 415.00 61.20 476.20 390.00 61.20 451.20 Equivalent Cadre
Passed)
127 Mechinist Class - I 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
128 Mechinist Class - II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Operator for pump
129 compressor Mixer without 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
ITI
LXXV
130 Drilling mechanic Grade I 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
131 Drilling mechanic Grade II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
132 Revenue Surveyor 460.00 61.20 521.20 445.00 61.20 506.20 415.00 61.20 476.20 Equivalent Cadre
134 Stone cutter Class - II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Sismological Asst. having
135 675.00 61.20 736.20 675.00 61.20 736.20 675.00 61.20 736.20 Equivalent Cadre
graduation in Geology
136 Tracer/Blue Printer 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
137 Turner with ITI Certifiate Gr.I 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Turner with ITI Certificate
138 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Gr.II
139 Valveman 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
140 Welder Grade I 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
141 Welder Grade II 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
Work Inspector/Maistry/
142 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Supervisor
STATEMENT SHOWING THE LABOUR RATES FOR ZONE-A & ZONE-B FOR THE YEAR 2019-20
(For payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
ZONE CATEGORIZATION
ZONE I :: Bruhat Bengaluru Mahanagara Palike, Other Corporation areas of the state & their Agglomeration Areas.
ZONE II :: All District Centres of the state other than mentioned in Zone I
ZONE III :: Other than Places mentioned in Zone I & II
ZONE - I ZONE - II ZONE - III REMARKS
Sl.
Particulars Basic DA Total Basic DA Total Basic DA Total Equivalent Cadre
No.
Electrical Inspector with
143 Supervisor with 5 years 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
experience
144 Driver for Rig 449.00 61.20 510.20 437.00 61.20 498.20 407.00 61.20 468.20 Equivalent Cadre
Ex-Serviceman/Night
145 385.00 61.20 446.20 375.00 61.20 436.20 350.00 61.20 411.20 Equivalent Cadre
Watchman
146 Ballower 395.00 61.20 456.20 385.00 61.20 446.20 360.00 61.20 421.20 Equivalent Cadre
147 Chinnadika Cooli 425.00 61.20 486.20 415.00 61.20 476.20 390.00 61.20 451.20 Equivalent Cadre
LXXVi
148 Saranga/Khasasi 405.00 61.20 466.20 395.00 61.20 456.20 375.00 61.20 436.20 Equivalent Cadre
Chapter - 1
SITE CLEARANCE &
DISMANTLING
1
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
2
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
1.09 Dismantling of CI water pipe line 600 mm dia Mtr 136.00 136.00
including disposal with all lifts and stacking of
serviceable material and unserviceable material
separately under supervision of concerned department
complete as per specifications.MORTH Specification
No. 202
1.10 Dismantling of barbed wire fencing / wire mesh Mtr 65.00 65.00
fencing including posts, foundation concrete, back
filling of pit by manual means including disposal of
dismantled materia with all lifts, stacking serviceable
material and unserviceable material separately
complete as per specifications.MORTH Specification
No. 202
3
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
4
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
5
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
6
Chapter - 2
Earthwork
7
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
2.0 EARTHWORK
FOR STRUCTURES
2.01 Earthwork in surface excavation in ordinary soil for Cum 249.00 249.00
levelling and lowering the ground manually (other
than foundation of buildings, culverts, road drains and
trenches of pipe lines and cables) and removing the
excavated stuff to a distance not exceeding 50m and
lift upto 1.5m, excavated surface levelled and neatly
dressed, disposed earth to be levelled after breaking
of clods and neatly dressed as per specifications.
Specification No KBS 2.1(a)/2.3.1
2.02 Earthwork in surface excavation in hard soil for Cum 348.00 348.00
levelling and lowering the ground manually ( other
than foundation of buildings, culverts, road drains and
trenches of pipe lines and cables ) and removing the
excavated stuff to a distance not exceeding 50m and
lift upto 1.5m, excavated surface levelled and neatly
dressed, disposed earth to be levelled after breaking
of clods and neatly dressed as per specifications.
specification. Specification No KBS 2.1(a)/2.3.1
2.03 Earth work for lowering and levelling the ground other Cum 60.00 60.00
than foundation works by mechanical means upto
3.00m depth , including providing shoring, strutting,and
bracing, removal of stumps and other deleterious
matter, dressing of sides and bottom, filling back the
excavated earth to the extent required and utilising/
transporting the remaining earth upto 1.00 KM lead
including the cost of Labour & HOM of Machineries, as
per drawing and technical specification.
2.04 Earthwork excavation by manual means for Cum 299.00 299.00
foundation of buildings, culverts, water supply and
sanitary lines and electrical conduits etc, either in pits
or in trenches 1.5m and above in width, in ordinary
soil not exceeding 1.5 m. in depth including dressing
the bottom and sides of pits and trenches, stacking
the excavated soil clear from edges of excavation with
lead upto 50 m. including breaking of clods complete
as per specifications.
2.05 Earthwork excavation by manual means for Cum 448.00 448.00
foundation of buildings, culverts, water supply and
sanitary lines and electrical conduits etc, either in pits
or in trenches 1.5m and above in width, in hard soil
not exceeding 1.5 m. in depth including dressing the
bottom and sides of pits and trenches, stacking the
excavated soil clear from edges of excavation with
lead upto 50 m. including breaking of clods complete
as per specifications.
8
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
2.08 Excavation for foundation of buildings, water supply & Cum 2041.00 2041.00
sanitary lines & electrical conduits etc., either in pits
or in trenches 1.50m & above in width in hard rock
by chiselling and / or wedging where blasting in
prohibited, not excluding 1.50m in depth including
stacking the excavated stuff clear from edges of
excavation with lead upto 50m including cost of
explosives, labour HOM of equipment complete as per
specifications
2.09.3 Ordinary/Hard Rock (With blasting using explosives) Cum 741.00 741.00
2.10 Benching hard rock 5 to 7.5 cm depth. for seating Cum 2191.00 2191.00
of foundation, including cost of all labour, tools etc.,
complete as per specifications.
9
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
2.11 Filling available excavated earth ( excluding rock ) in Cum 201.00 201.00
sides of foundations upto plinthin layers not exceeding
20 cms. in depth, compacting each deposited layer by
ramming afterwatering with lead upto 50 m. and lift
upto 1.5 m. including cost of all labour complete as
perspecifications.
2.12 Providing and filling sand in foundation upto plinth Cum 2112.00 2190.00
to required depth for sub soil treatment including
watering ramming with all lead and lift complete as per
specifications.
2.13 Providing and Filling in foundation with granite / trap Cum 2137.00 2143.00
broken metal 100mm. And down size, with approved
sand including hand packing, ramming, watering,
including cost of all materials and labour with all lead
and lift. complete as per specifications
2.14 Providing sand cement bed with 5% cement with all Cum 3033.00 3138.00
leads for all materials and lift of 1.5 m. machine mixed,
laid in layers of 15cms. thick and well compacted for
foundation, including curing cost of materials labour
and HOM complete as per specifications.
2.15 Providing sand cement bed with 10% cement with all Cum 3442.00 3573.00
leads for all materials and lift of 1.5 m. machine mixed,
laid in layers of 15cms. thick and well compacted for
foundation including curing cost of materials labour
and HOM complete as per specifications.
2.16 Providing sand piles with all leads and lift of 1.5 m. Cum 323.00 324.00
for stabilising foundation after duly making 5 cms.
dia holes to a depth of 1.2 to 1.5 m. at 0.5 m c to c
and filling with sand and tamping wherever required
including cost of materials, labour complete as per
specifications
2.17 Providing sand cement piles with all lead and lifts Cum 360.00 362.00
for stabilising foundation bed after making 5 cms.
dia holes to a depth of 1.2 to 1.5 m. at 0.5 m c to
c and filling with sand and 10% cement, tamping
wherever required including cost of materials, labour
complete as per specifications.
2.18 Providing and removing shoring and shuttering for Sqm 400.00 452.00
protecting the sides of foundation trenches, wherever
required, including cost of all materials and labour
complete as per specifications.
10
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
2.19 Extra for additional lift of 1.5m. or part thereof for Cum 19.90 19.90
excavation In loose / soft or hard soil including cost of
materials, labour complete as per specifications.
2.20 Extra for additional lift of 1.5m. or part thereof for Cum 34.80 34.80
excavation In soft or hard rock including cost of
materials, labour complete as per specifications.
2.21 Removal of Unserviceable Soil with Disposal . Cum 33.00 33.00
Removal of unserviceable soil including excavation,
loading and disposal but excluding replacement by
suitable soil which shallbe paid separately as per
clause 300.5 complete as per specification MORTH
specification no 301.
FOR PIPE LINES
2.22 Earthwork excavation for pipeline trenches including
depositing on bank upto a lead of 50 mtrs and depth
up to 2.00 mtrs. Including shoring and strutting,
danger lighting and using sight rails and boning rods
at every 100 mtrs. Wherever necessary as directed in
the following strata. (Manual Means)
2.22.1 In Ordinary Soil Cum 262.00 262.00
2.22.2 In Hard Soil Cum 262.00 262.00
2.22.3 Earthwork excavation for pipeline trenches including Cum 592.00 592.00
depositing on bank upto a lead of 50 mtrs and depth
up to 2 mtrs. Including shoring and strutting, danger
lighting and using sight rails and boning rods at every
100 mtrs. Wherever necessary as directed (Manual
Means) In Ordinary rock without blasting
2.23 Earth work excavatoin for water Supply & Sanitary
lines, Electrical conduits either in pits or pipe line
trenches (upto 600mm Trench width) as per drawing
and technical specification, including setting out,
construction of shoring, strutting, barricading, danger
lighting, bracing, using sight rails & boning rods
at every 100 mm whevere necessary removal of
stumps and other deleterious matter, dressing of
sides and levelling the bottom of trench, including
backfilling the excavated earth to the extent required
and utilising the remaining available excavated
earth locally for the work. in the following strata
classifications by Mechanical Means
2.23.1 Ordinary / Hard Soil - (Depth upto 3m) Cum 130.00 130.00
11
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
12
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
2.28.1 do- 1.50 mtrs depth below LWL Cum 295.70 295.70
2.28.2 do- beyond 1.50 mtrs depth upto & including 3m depth. Cum 394.00 394.00
2.28.3 do- beyond 3.00 mtrs depth upto & including 4.5m Cum 648.70 648.70
depth.
2.28.4 do- beyond 4.50 mtrs depth upto & including 6.00m Cum 801.80 801.80
depth.
2.29.1 Do in all soils excluding hard murrum (Dry condition) Cum 262.00 262.00
2.29.3 --- do --- in soft rock and dis-integrated rock under Cum 592.00 592.00
dry condition
2.29.4 --- do --- in Hard rock requiring blasting under dry Cum 1326.00 1326.00
condition
2.29.5 -- do -- in all soils excluding hard murram under water Cum 341.00 341.00
situation.
2.29.6 --do- in hard murrum under watery situation Cum 341.00 341.00
2.29.7 --- do --- in soft rock and dis-integrated rock under Cum 770.00 770.00
watery situation.
2.29.8 --- do --- in Hard rock requiring blasting under watery Cum 1724.00 1724.00
situation.
13
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
14
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
2.31 Providing pebbles of size 0.32cms to 10cms (1/8 Cum 2319.00 2343.00
inch to 4 inch) graded filter media with sand including
laying, grading and hand packing in position as per
specification etc., complete.
15
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
2.33 Providing cut-off trench filling using selected Cum 208.00 208.00
impervious soil from approved borrow areas in layers
of 250 to 300 mm before compaction including cost of
all materials, machinery, labour, all other operations
such as excavation, sorting out, transportation,
spreading in layers of specified thickness, breaking
clods, sectioning, watering, compacting to density
control of not less than 95 percent using power
roller etc.,complete with all lead and lifts
2.34 Providing casing embankment using semi- Cum 209.00 209.00
pervious soil from approved borrow areas in layers
of 250 to 300 mm before compaction including cost of
all materials, machinery, labour, all other operations
such as excavation, sorting out, transportation,
spreading soil to specified thickness, breaking clods,
sectioning, watering, compacting to density control of
not less than 95 percent using power roller etc.,
complete with all lead and lifts
2.35 Providing casing embankment using semi-pervious Cum 139.00 139.00
soil available from excavation in layers of 250 to300
mm before compaction including cost of all materials,
machinery, labour, all other operations such as re-
excavation, sorting out, transportation, spreading
soil to specified thickness, breaking clods, sectioning,
watering, compacting to density control of not less
than 95 percent using power roller etc., complete
with all lead and lifts.
2.36 Providing and constructing dry rubble rock-toe Cum 563.00 563.00
using rubble and stone chips from approved source
including cost of all materials, machinery, labour, hand
packing rubble and stone chips, finishing top and
sides to required slopes etc. complete with all lead
and lifts.
2.37 Providing and constructing dry rubble rock-toe Cum 423.00 423.00
with rubble and stone chips from dump yard
including cost of all materials, machinery, labour,
hand packing rubble and stone chips, finishing top
and sides to required slopes etc.,complete with all
lead and lifts.
2.38 Providing and constructing longitudinal / cross Cum 1516.00 1516.00
graded filter drains using sand and 80 to 20 mm and
20 mm down graded aggregates satisfying specified
filter creteria in layers as per specifications
including cost of all materials, machinery, labour,
laying to required slopes, compaction etc., complete
with all lead and lifts.
16
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
2.40 Providing and constructing graded filter media Cum 1343.00 1343.00
below and behind rock-toe consisting of 200 mm
thick sand, 250 mm thick 20 - 4.75 mm and 400 mm
thick 80 - 20 mm size graded coarse aggregates
satisfying filter creteria as per specifications
including cost of all materials, machinery, labour,
laying to required slope, compaction etc., complete
with all lead and lifts
2.41 Providing and constructing 450 mm thick hand Sqm 417.00 417.00
packed rough stone revetment consisting of 300
mm thick rough stones with 400 to 450 mm long
through stones at 1.5 m c / c over a backing of
150 mm thick 40 mm down graded coarse aggregate
layer including cost of all materials, machinery, labour,
laying to specified slope, wedging with chips, finishing
etc., complete with all lead and lifts
2.42 Providing and constructing 150 mm dia hume pipe mtr 362.00 362.00
weep holes for concrete / masonry walls including
providing 200 x 200 x 200 mm size porous concrete
block made of cement and 20 mm down coarse
aggregate in 1 : 4 proportion including 100 mm thick
sand backing at the junction of wall and soil back fill,
cost of all materials, machinery, labour etc., complete
with all lead and lifts
2.43 Preparing foundation bed for cut-off trench Sqm 34.00 34.00
filling in rock portion by removing all loose material
by wedging / chiselling and disposing off the same as
directed etc., complete with all lead and lifts.
17
Chapter - 3
Mortar
18
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
3.0 MORTAR
3.01 Providing cement mortar of mix 1:1 (1 cement : 1 Cum 7716.00 8143.00
sand) including cost of all materials, labour charges,
HOM of machinery complete as per specifications.
3.02 Providing cement mortar of mix 1:2 (1 cement : 2 Cum 6250.00 6572.00
sand) including cost of all materials, labour charges,
HOM of machinery complete as per specifications.
3.03 Providing cement mortar of mix 1:3 (1 cement : 3 Cum 5519.00 5789.00
sand) including cost of all materials, labour charges,
HOM of machinery complete as per specifications.
3.04 Providing cement mortar of mix 1:4 (1 cement : 4 Cum 4778.00 5001.00
sand) including cost of all materials, labour charges,
HOM of machinery complete as per specifications.
3.05 Providing cement mortar of mix 1:5 (1 cement : 5 Cum 4380.00 4577.00
sand) including cost of all materials, labour charges,
HOM of machinery complete as per specifications.
3.06 Providing cement mortar of mix 1:6 (1 cement : 6 Cum 4038.00 4214.00
sand) including cost of all materials, labour charges,
HOM of machinery complete as per specifications.
3.07 Providing cement mortar with stone dust of mix Cum 4917.00 5190.00
1:2 (1 cement : 2stone dust) including cost of
all materials, labour charges, HOM of machinery
complete as per specifications.
3.08 Providing white cement mortar with marble dust of Cum 14378.00 14379.00
mix 1:2 (1 white cement : 2 marble dust) including
cost of all materials, labour charges, HOM of machinery
complete as per specifications.
3.09 Providing white cement mortar with marble dust of Cum 11286.00 11287.00
mix 1:3 (1 white cement : 3 marble dust) including
cost of all materials, labour charges, HOM of machinery
complete as per specifications.
3.10 Providing white cement mortar with marble dust of Cum 8824.00 8825.00
mix 1:4 (1 white cement : 4 marble dust) including
cost of all materials, labour charges, HOM of machinery
complete as per specifications.
3.11 Providing white cement mortar with marble dust of Cum 7498.00 7499.00
mix 1:5 (1 white cement : 5 marble dust) including
cost of all materials, labour charges, HOM of machinery
complete as per specifications.
19
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
3.12 Providing fly ash sand mortar of mix 1:1.5:3 Cum 3853.00 4034.00
(1 cement : 1.5 fly ash : 3 sand) including cost of
all materials, labour charges, HOM of machinery
complete as per specifications.
3.13 Providing fly ash sand mortar of mix 1:2:4 (1 cement Cum 3341.00 3489.00
: 2 fly ash : 4 sand) including cost of all materials,
labour charges, HOM of machinery complete as per
specifications.
3.14 Providing fly ash sand mortar of mix 1:2.5:5 Cum 3056.00 3186.00
(1 cement : 2.5 fly ash : 5 sand) including cost of
all materials, labour charges, HOM of machinery
complete as per specifications.
3.15 Providing fly ash sand mortar of mix 1:3:6.5 Cum 2828.00 2944.00
(1 cement : 3 fly ash : 6.5 sand) including cost of
all materials, labour charges, HOM of machinery
complete as per specifications.
20
Chapter - 4
CEMENT CONCRETE
21
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
22
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
4.06 Extra for laying cement concrete under water including Cum 153.00 153.00
cost of pumping or dewatering and clearing slush as
per specifications.
4.07 Extra for laying cement concrete under foul conditions. Cum 219.00 219.00
Specification No. KBS
4.08 Providing and laying in position reinforced cement Cum 5709.00 6051.00
concrete of Design mix M20 with OPC cement @
320kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine
aggregtes @ 0.460 cum, with super plasticisers @
3 liters confirming to IS 9103-1999 reafirmed-2008,
machine mixed, concrete laid in layers not exceeding
15 cms thick,vibrated for all works in foundation for
footings, pedastals, retaining walls, return walls,
walls (any thickness ) including attached pilasters,
columnspillars, posts, struts, buttresses, bed
blocks,anchor blocks & plinths etc., including cost
of all materials, labour, HOM of machinery, curing,
complete but excluding cost of reinforcement as per
specifications.
4.09 Providing and laying in position reinforced cement Cum 5859.00 6212.00
concrete of Design mix M25 with OPC cement
@ 340kgs, with 20mm and down size graded
granite metal coarse aggregates@0.70 cum and fine
aggregtes @ 0.47cum, with super plasticisers @ 3
liters confirming to IS 9103-1999 reafirmed-2008 at
machine mixed, concrete laid in layers not exceeding
15 cms thick, vibrated for all works in foundation for
footings, pedastals, retaining walls, return walls,
walls (any thickness ) including attached pilasters,
columnspillars, posts, struts, buttresses, bed
blocks,anchor blocks & plinths, etc.. ., including
cost of all materials, labour, HOM of machinery,
curing,complete but excluding cost of reinforcement
as per specifications.
4.10 Providing and laying in position reinforced cement Cum 5899.00 6253.00
concrete of Design mix M30 with OPC cement @
360kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69 cum and fine aggregtes
@ 0.46 cum, with super plasticisers @ 1% by wt. of
cement, confirming to IS 9103-1999 reafirmed-2008 at
machine mixed, concrete laid in layers not exceeding
15 cms thick, vibrated for all works Bottom Raft,
etc.. ., including cost of all materials, labour, HOM
of machinery, curing,complete but excluding cost of
reinforcement as per specifications.
23
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
4.11 Providing and laying in position reinforced cement Cum 5942.00 6284.00
concrete of design mix M20 with OPC cement @
320kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine
aggregtes @ 0.46cum, with superplastisiser @3lts
confirming to IS9103-1999Reaffirmed-2008, machine
mixed, concrete laid in layers not exceeding 15 cms
thick, vibrated forall works in ground floor level for
roof slabs, staircase, lintels, and beams,retaining
walls, return walls, walls ( any thickness ) including
attached pilasters, columns, pillars,posts, struts,
buttresses, string or lacing courses, parapets,
coping, bed blocks, anchor blocks,plain window
cills, fillets etc., including cost of all materials, labour,
HOM of machinery, curing,complete but excluding
cost of reinforcement as per specifications.
4.12 Providing and laying in position reinforced cement Cum 444.00 468.00
concrete of design mix M20 with OPC cement @
24kgs, with 12mm and down size graded granite
metal coarse aggregates @0.05175cum and fine
aggregtes @ 0.0345cum, with superplastisiser
@0.225lts, machine mixed, well compacted for plain
chajja of 7.5 cms. average thickness, upto ground
floor level, including cost of all materials, labour,
HOM of machinery, finishing, curing, complete but
excluding cost of reinforcement as per specifications.
4.13 Providing and laying in position reinforced cement Sqm 500.00 528.00
concrete of design mix M20 with OPC cement @
27.20kgs, with 12mm and down size graded granite
metal coarse aggregates well compacted for plain
chajja of 8.5 cms. average thickness, upto ground
floor level, including cost of all materials, labour,
HOM of machinery, finishing, curing, complete but
excluding cost of reinforcement as per specifications.
4.14 Extra for providing throating or drip moulding to m 32.00 32.00
R.C.C. chajja with plastering (labour charges only ) as
per specifications.
4.15 Extra if vibrator is used for Item No.4.01 to 4.06 as per Cum 14.00 14.00
specifications.
4.16 Deduct where machine mixing is not done as per Cum 14.00 14.00
specifications.
4.17 Extra for use of approved quality of water proofing Cum 209.00 209.00
compound in Cement concrete grade of M 25, at one
kg of compound per bag of cement.
24
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
4.18 Extra for use of approved quality water proofing Cum 154.00 154.00
compound in Cement concrete grade of M 20, at one
kg of compound per bag of cement.
4.19 Extra for use of approved quality water proofing Cum 123.00 123.00
compound in Cement concrete grade of M 15, at one
kg of compound per bag of cement.
4.20 Providing and removing centering, shuttering, Sqm 255.00 258.00
strutting, propping etc., and removal of form work
for foundations, footings, bases of columns for
mass concrete including cost of all materials, labour
complete as per specificaitons.
4.21 Providing and removing centering, shuttering, Sqm 385.00 392.00
strutting, propping etc., and removal of form work for
suspended floors, landings, balconies and likes,
thickness upto 200 mm including cost of all materials,
labour complete as per specificaitons 0.00 to 5.00 mts
4.22 Providing and removing centering, shuttering, Sqm 435.00 440.00
strutting, propping etc., and removal of form work
for flat surface such as suspended floors, roofs,
landings, balconies and likes, thickness above 200
mm including cost of all materials, labour complete as
per specificaiton
4.23 Providing and removing centering, shuttering, strutting, Sqm 357.00 358.00
propping etc., and removal of form work for vertical
surface such as walls at any thickness, including
attached pilasters, buttresses, plinth and string
courses cost of all materials, labour complete as per
specificaitons
4.24 Providing and removing centering, shuttering, strutting, Sqm 455.00 455.00
propping etc., forcolumns, pillars, post and struts,
square / rectangular / polygon in plan including cost
of all materials, labour complete as per specificaiton.
4.25 Providing and removing centering, shuttering, strutting, Sqm 875.00 916.00
propping etc., and removal of form work for columns,
pillars,post and struts, circular or curved in plan
including cost of all materials, labour complete as per
specificaiton.
4.26 Providing and removing centering, shuttering, strutting, Sqm 291.00 292.00
propping etc., and removal of form work for sides
and soffits of beams, beam haunchings, cantilever
girders, bressumers and lintels not exceeding 1m in
depth including cost of all materials, labour complete
as per specificaitons.
25
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
4.27 Providing and removing centering, shuttering, strutting, Sqm 399.00 403.00
propping etc., and removal of form work for sides and
soffits of beams, beams haunchings, cantilelver,
girders, bressumers and lintels exceeding 1m in
depth including cost of all materials, labour complete
as per specificaitons.
4.28 Providing and removing centering, shuttering, strutting, Sqm 721.00 757.00
propping etc., for edges of slabs and breaks in floor
including cost of all materials, labour complete as per
specificaiton.
4.29 Providing and removing centering, shuttering, strutting, Sqm 319.00 323.00
propping etc., for chajjas, corbels etc., including
edges including cost of all materials, labour complete
as per specificaiton.
4.30 Providing and removing centering, shuttering, Sqm 500.00 520.00
strutting, propping etc., and removal of form work for
Stairs (excluding landing) except spiral staircase
including cost of all materials, labour complete as per
specificaiton.
4.31 Providing and removing centering, shuttering, strutting, Sqm 488.00 512.00
propping etc., and removal of form work for cornices
and mouldings including cost of all materials, labour
complete as per specificaitons.
4.32 Providing and removing, centering, shuttering, Sqm 595.00 597.00
strutting, propping etc., and removal of form work for
vertical fins and vertical sun breakers including cost
of all materials, labour complete as per specificaitons.
4.33 Providing and removing centering, shuttering, strutting, Sqm 507.00 512.00
propping etc., and removal of form work for sloping
or battering surface including folded plates where
inclination to horizontal plane does not exceed 30
degree requiring shuttering only on the under side
including cost of all materials, labour complete as per
specificaitons.
4.34 Providing and removing centering, shuttering, Sqm 804.00 811.00
strutting, propping etc., and removal of form work for
where inclination to horizontal plane exceeds 30
degree ( where shuttering may be provided both on
under side and upper side if required ) including cost
of all materials, labour complete as per specificaitons.
4.35 Providing 2 legged scaffolding for stone masonry
work using 10-15 cms. dia best quality casurina poles
of 4m over all length (3m +0.5m projection + 0.5m In
to the ground), the distance between two rows being
26
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
4.35.1 -do- Scaffolding for stone masonry work converted to m 335.00 335.00
m
4.35.2 -do- Scaffolding for stone masonry work converted to Cum 252.00 252.00
Cum
4.35.3 -do- Scaffolding for stone masonry work converted to Sqm 120.00 120.00
Sqm
4.36.1 do- for non modular brick work Cum 250.00 250.00
4.36.3 -do- for non modular brick work Sqm 57.00 57.00
4.37.1 Providing and laying cement concrete using 20 mm Cum 5444.00 5444.00
and down size granite coarse aggregates and fine
aggregates of ready mixed concrete (RMC) M 20
for R.C.C works laid in 15 cms thick layersand well
compacted vibrating, curing, , for foundations & sub-
structure work raft foundation column footing
, main and secondary beams' Flash mixers,
Floculator, RSF, Raft of Zonal balancing Tanks,
Raft of Master Blancing Tank, Raft of IPS/IMP, Side
wall and Top Dome for GLSR's, Pure water sump
etc.. ., including cost of all materials, labour, HOM
of machinery, curing,complete but excluding cost
of reinforcement as per specifications. with all lead
and lifts etc., complete (exclusive of cost of steel and
fabrication charges.)
27
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
4.37.2 Providing and laying cement concrete using 20 mm Cum 5497.00 5497.00
and down size granite coarse aggregates and fine
aggregates of ready mixed concrete (RMC) M
25 for R.C.C works laid in 15 cms thick layersand
well compacted vibrating, curing, for foundations
& sub-structure work for raft foundation column
footing , main and secondarybeams' Flash mixers,
Floculator, RSF, Raft of Zonal balancing Tanks,
Raft of Master Blancing Tank, Raft of IPS/IMP, Pure
water sump etc.. ., including cost of all materials,
labour, HOM of machinery, curing,complete but
excluding cost of reinforcement as per specifications.
with all lead and lifts etc., complete (exclusive of cost
of steel and fabrication charges.)
4.37.3 Providing and laying cement concrete using 20 mm Cum 5598.00 5598.00
and down size granite coarse aggregates and fine
aggregates of ready mixed concrete (RMC) M
30 for R.C.C works laid in 15 cms thick layersand
well compacted vibrating, curing, for foundations
& sub-structure work for raft foundation column
footing , main and secondarybeams' Flash mixers,
Floculator, RSF, Raft of Zonal balancing Tanks,
Raft of Master Blancing Tank, Raft of IPS/IMP, Pure
water sump etc.. ., including cost of all materials,
labour, HOM of machinery, curing,complete but
excluding cost of reinforcement as per specifications.
with all lead and lifts etc., complete (exclusive of cost
of steel and fabrication charges.)
4.38.1 Providing and laying cement concrete using 20 mm Cum 5764.00 5764.00
and down size granite coarse aggregates and fine
aggregates of ready mixed concrete (RMC) M 25
for R.C.C works laid in 15 cms thick layers and well
compacted vibrating, curing, for all super structure
works, Flash mixers, Floculator, RSF, Raft of
Zonal balancing Tanks, Raft of Master Blancing
Tank, Raft of IPS/IMP, Side wall and Top Dome
for GLSR's, Pure water sump etc.. ., including
cost of all materials, labour, HOM of machinery,
curing,complete but excluding cost of reinforcement as
per specifications with all lead and lifts etc., complete
(exclusive of cost of steel and fabrication charges.)
4.38.2 Providing and laying cement concrete using 20 mm Cum 5815.00 5815.00
and down size granite coarse aggregates and fine
aggregates of ready mixed concrete (RMC) M 30
for R.C.C works laid in 15 cms thick layersand well
compacted vibrating, curing, for all super structure
works, Flash mixers, Floculator, RSF, Raft of
28
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
29
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
30
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
4.45 Providing and laying Reinforced cement concrete Cum 7277.00 7694.00
of mix design of M-35 Grade with cement @ 390
kg, 20mm and graded granite or trap or basalt jelly of
approved quality @ 0.68 cum and fine aggregates @
0.45 cum, super plasticiser @ 3lts confirming to IS-
9103-1999 reaffirmed 2008 in layers of not more than
15 cms thick, well consolidated including centering,
formwork, vibrating, curing, smooth finishing to
the required plumb and face in C.M.1:3 proportion
wherever necessary etc., complete for R. rafts, raft
ring-beam, column footing, columns below ground
level (exclusive cost of steel and fabrication charges)
4.46 Providing and laying Reinforced cement concrete Cum 7413.00 7838.00
of mix design of M-40 Grade with cement @ 420
kg, 20mm and graded granite or trap or basalt jelly of
approved quality @ 0.67 cum and fine aggregates @
0.44 cum, super plasticiser @ 3lts confirming to IS-
9103- 1999 reaffirmed 2008 in layers of not more than
15 cms thick, well consolidated including centering,
formwork, vibrating, curing, smooth finishing to
the required plumb and face in C.M.1:3 proportion
wherever necessary etc., complete for R. rafts, raft
ring-beam, column footing, columns below ground
level (exclusive cost of steel and fabrication charges)
4.47 Providing and laying Reinforced cement concrete
of mix design of M-25 Grade with cement @ 340
kg, 20mm and graded granite or trap or basalt jelly of
approved quality @ 0.7 cum and fine aggregates @
0.47 cum, super plasticiser @ 3lts confirming to IS-
9103-1999 reaffirmed 2008 in layers of not more than
15 cms thick, well consolidated including centering,
formwork, vibrating, curing, smooth finishing to
the required plumb and face in C.M.1:3 proportion
wherever necessary etc.,complete as per design
and specification for staging, columns and braces
above ground level (exclusive of cost of steel and
fabrication charges)
4.47.1 A. Staging of 6.00m per cum Cum 11778.00 12010.00
4.47.2 B. Staging of 7.50m per cum Cum 12081.00 12585.00
4.47.3 C. Staging of 9.00m per cum Cum 12391.00 12908.00
4.47.4 D. Staging 10.50m per cum Cum 12709.00 13240.00
4.47.5 E. Staging of 12.00m per cum Cum 13036.00 13580.00
4.47.6 F. Staging of 15.00m per cum Cum 13371.00 13929.00
4.47.7 G. Staging of 18.00m per cum Cum 13715.00 14287.00
31
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
32
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
33
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
35
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
36
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
37
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
4.60 Lift charges for steel of all diameters for additional Ton 747.00 747.00
floors over ground floor per floor height of 3.5 m. or part
thereof cost of labour, complete as per specifications.
4.61 Labour Charges for fabricating TMT steel Ton 10829.00 10829.00
reinforcement confirming to IS 226/1786 of 1966 with
latest amendments including cleaning, straightening,
cutting, bending, hooking, lapping or welding wherever
required, hoisting and placing in position and tying
with binding wire of approved quality & 16 gauge as
per design & drawing including conveyance excluding
cost of steel etc., complete (including cost of binding
wire)
4.62 Providing and fixing M.S. ladder between landing 45 Rmtr 1821.00 1821.00
cms. wide using angle iron of following size and 20 mm
M.S. bars at 25cms. centre to centre with necessary
supports of same angle iron as directed including
hand railing on both sides with 25mm dia G.I. pipes
with angle iron props at 2 mtrs, interval and 0.5 mtr,
height including fixing in ground with C.C. 1:2:4 and
two coats of nonpoisonous anticorrosive bituminous
paint with all lead and lift etc., complete. 65x65x8mm
angle iron frame.
4.63 Ladder inside the container: Providing anodized Rmtr 3099.00 3099.00
aluminium ladder using 65mm x 32mm x 3.0mm ‘C’
section for ladder side channel x 25mm dia., flutal pipe
for Rungs at 250mm c/c ladder fixed at an angle of 70
degrees to horizontal including necessary 25mm dia.,
G.I. shutters with necessary G.I. fasteners for bracing
the ladders to the Tank walls to prevent buckling of the
ladder with necessary (M-15) bed for embedding the
ladder bottom complete
4.64 Providing & fixing G.I. pipe railing of 32mm dia.,G.I. Rmtr 679.00 679.00
pipe B-class in two rows of roof dome flat slab of
landing of elevated storage reservoir including cutting,
welding, threading, painting, embedding in C.M. pillars
with all lead and lifts etc., complete.
38
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
4.66 Providing and fixing 60x60cms M.S. inspection door Each 1818.00 1818.00
with necessary M.S. frame made out of M.S. angle
50x50x6mm and M.S. shutters of 31.5mm or B.G.10
thick with hinges on top and locking arrangement,
painting etc., complete (for RCC over head tank and
G.L.S.R.)
4.67 Providing and fixing enameled gauge plate 3 mm Each 3382.00 3517.00
thick, 0.23 M wide with plastic float thick plastic
indicator and flexible nylon wire etc., complete to 2.50
M height.
4.68 Labour charges for fixing puddle flanges in position of Each 456.00 456.00
RCC including (80mm to 200mm)
4.69 Labour charges for hoisting C.I. flanged pipes 2.75mtrs Each 616.00 616.00
length in position aligning the plumb and jointing for
RCC over head tank 80mm to 200mm
39
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
4.72 Providing & fixing copper lightning arrester with five Each 9645.00 9645.00
spikes and 20mm dia copper tube or suitable length
of aluminium strip of spike 25mmx3mm including
grounding as per specification. The aluminium strip is
to be encased in G.I. conduct pipe or 40mm dia., 6.8
M long suitably joined by collar with all specials, fixed
to one of the columns etc., complete up to 6 M staging.
Note:- Data every additional running meter (for item 698.00 698.00
no 4.72)
4.73 Providing and applying 2 coats of corrosion Ton 1670.00 1670.00
Inhibition cement slurry on Reinforcement bars
prepared by mixing of 1 Kg of OPC with 500 CC of
Inhibitor solution of approved quality by dipping or
brushing method,the first coat being applied after
cleaning the bars by wire brush or alkaline cleaning
powder to remove the rust and dust, and allowed to
air dry for 12-24 hours as the case may be and the
second coat being applied on the fabricated bars
before placing in positionas per clause 5.3.3 of IS
9077-1979. The Rate includes cost and conveyance
of all materials, labour charges etc., complete as per
the direction of Engineer in-charge.
40
Chapter - 5
MASONRY STRUCTURES-STONE
AND BRICK WORK
41
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
5.06 Extra for constructing masonry in circular pillars Cum 1111.00 1102.00
including cost of extra materials and labour complete
as per specifications.KBS 5.1.13
5.07 Providing and constructing load bearing wall with
solid concrete blocks having block density not
less than 1800kg/m3 having a minimum average
compressive strength of 5.00 N/mm2 confirming to
IS 2185 (Part 1):2005 and constructed with CM 1:4,
as per IS 2572:2005 including cost of all materials
labour charges, scaffolding, curing, hire charges of
machineries etc., complete as per specifications
5.07.1 do - with solid concrete blocks of size 400x200x200mm Sqm 953.00 954.00
5.07.2 do - with solid concrete blocks of size 400x150x200mm Sqm 912.00 915.00
5.08 Providing and constructing non load bearing wall Sqm 811.00 812.00
with solid concrete blocks of size 400x100x200mm
having a block density not less than 1800kg/m3
42
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
43
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
5.14 Construction of partition wall 11.2 cms thick with non- Sqm 789.00 811.00
modular ground moulded burnt bricks of class
designation 3.5Newton per sqmm with cement
mortar 1:4 including cost of materials, labour charges,
scaffolding, curing complete as per specifications.
Specification No. KBS 6.2
5.15 Construction of partition wall 11.2 cms thick with Sqm 886.00 901.00
non-modular table moulded burnt bricks of class
designation 5.0Newton per sqmm with cement
mortar 1:4 including cost of materials, labour charges,
scaffolding, curing complete as per specifications.
Specification No. KBS 6.2
5.16 Construction of partition wall 10 cms thick with Sqm 821.00 856.00
table moulded modular burnt bricks of class
designation 5.0Newton per sqmm with cement
mortar 1:4 including providing and fixing plaster mesh
manufactured out of hot dipped gelvanised iron of
nominal thickness 0.35 mm. 100 mm. wide as per I.S.
2212/1991 at 7.5 m. c to c including cost of materials,
labour charges, scaffolding, curing complete as per
specifications. Specification No. KBS 6.2
5.17 Provinding and constructing non load bearing wall
with Light Weight Concrete (Autoclaved areated
concrete) Blocks confirming to IS:2185 (part-3) 1984
and IS 6441-1972 of compressive strength of 3.0N/sq
mm with a thin layer of polymer based jointing solvent
for super structure with neccesary scaffolding, curing
including cost of all materials, labour, lead& lift etc,
complete as per specifications.
5.17.1 - do - with 600x200x100mm size Blocks Sqm 1124.00 1124.00
5.17.2 - do - with 600x200x150mm size Blocks Sqm 1504.00 1504.00
5.17.3 - do - with 600x200x200mm size Blocks Sqm 1694.00 1694.00
5.17.4 - do - with 600x200x230mm size Blocks Sqm 2067.00 2067.00
Note: Lift charges : The above rates are applicable
for Ground floor only. An additional rate of Rs 60.00/
Cum and Rs 6/sqm per floor may be added for every
additional floor above or below the ground floor.
44
Chapter - 6
ROOFING, STEEL AND
ALLUMINIUM
45
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
46
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
47
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
48
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
49
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
50
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
51
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
52
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
53
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
54
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
6.22 Providing and fixing M.S. Hand railing for Balcony Sqm 2840.00 2979.00
with 50mm dia. M.S. hollow pipe of 14 gauge, welded
to 20mmx20mm M.S. square rod placed vertically,
spaced at 100mm at regular intervals of 600mm. These
vertical rods laterally tied to 3 horizontal rods spaced
at equal interval. These assembly is fixed to concrete
by using expansion bolts and welding the same to
reinforcement bars and making good the surface. All
the joints and sections hould be cut to length, welded
and grinded wherever necessary etc., complete . The
work includes cost of all materials, labour charges
for all items of work, hire charges for welding, cutting
and grinding equipment, and electricity charges, etc.,
complete as per specification and drawing .
FOR ROOFING
6.23 Providing and laying to required line and slope Sqm 374.00 374.00
roofing with semi-corrugated (Trafford) asbestos
cement sheet 6mm. thick fixed with galvanised iron
J or L hooks, bolts and nuts 8mm. dia C.I plain and
bitumen washers, over the existing purlins, rafters and
trusses including cost of materials, labour, complete
as per specifications.
6.24 Extra for A.C. sheet corrugated / semi-corrugated sheet Sqm 15.00 15.00
roofing with vertical sheeting to a pitch exceeding 60
degrees
55
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
6.25 Providing and fixing ridges, hips with asbestos Mtr 300.00 300.00
cement sheet roofing with G.I. J or L hooks, bolts
and nuts 8mm. dia G.I.plain and bitumen washers,
serrated or plain wings, adjustable ridges, including
cost of materials, labour, complete as per specifications
6.26 Providing and laying to required line and slope Mtr 383.00 383.00
roofing with semi-corrugated (Trafford) asbestos
cement sheet 6mm. thick fixed with galvanised iron
J or L hooks, bolts and nuts 8mm. dia C.I plain and
bitumen washers, over the existing purlins, rafters and
trusses including cost of materials, labour, complete
as per specifications.
6.27 Providing and fixing on wall surface asbestos cement Mtr 418.00 418.00
rain down water pipes 100 mm dia including filling
the joints with spun yarn soaked in neat cement slurry
1:2 with necessary specials like shoes, bends and
offsets fixed with iron clamps, wall plugs, screws,
including cost of materials, labour, curing complete as
per specifications.
6.28 Providing and fixing on wall surface 2.5 kg / sq.cm Mtr 365.00 364.00
H.D.P.E. rain down water pipes 90 mm outer dia
approved make and brand with necessary specials
like shoes, bends and offsets fixed with iron clamps,
wall plugs, screws, including cost of materials, labour,
curing complete as per specifications.
6.29 Providing and fixing on wall surface 2.5kg / sq.cm Mtr 432.00 431.00
H.D.P.E. rain down water pipes 110mm outer dia
approved make and brand with necessary specials
like shoes, bends and offsets fixed with iron clamps,
wall plugs, screws, including cost of materials, labour,
curing complete as per specifications.
6.30 Providing and fixing on wall surface 4.0 kg / sq.cm Mtr 391.00 390.00
H.D.P.E. rain down water pipes 90 mm outer dia
approved make and brand with necessary specials
like shoes, bends and offsets fixed with iron clamps,
wall plugs, screws, including cost of materials, labour,
complete as per specifications.
6.31 Providing and fixing on wall surface 4.0 kg / sq.cm Mtr 432.00 441.00
H.D.P.E. rain down water pipes 110mm outer dia
approved make and brand with necessary specials
like shoes, bends and offsets fixed with iron clamps,
wall plugs, screws, including cost of materials, labour,
complete as per specifications.
56
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
6.32 Providing and laying non-asbestos high impact Sqm 543.00 543.00
polypropylene reinforced corrugated cement roofing
sheet reinforced with a blend of strong factory made
fibers as per IS:14871 and ISO:9933:1995(E) roofing
upto any pitch and fixing with polymer coated J or L
hooks,bolts and nuts 8mm dia,G.I plain and bitumen
washers or with self drilling fastener and EPDM
washers etc. complete but excluding the cost of
etc,complete excluding the cost of purlins, rafters
and trusses. Including cutting to size and shape of
corrugated sheets wherever required.and cost of
materials, labour, complete as per specifications.
57
Chapter - 7
WOOD WORK
58
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
59
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
7.06 Providing and fixing in position shutters for doors made Sqm 3598.00 3456.00
out of Honne wood styles and rails of 40mm. thick with
bottom and lock rails 180mm wide top rail and styles
100mm wide as per drawing and panels of 18mm thick
of exterior grade Melamine impregnated prelamination
particle board of approved colour on one side and
balancing white colour on the other including cost of
materials, labour, HOM of machineries complete as per
specifications. ( excluding cost of fixtures ) Approved
Colour on one Side
7.07 Providing and fixing in position shutters for doors made Sqm 3464.00 3322.00
out of Honne wood styles and rails of 40mm. thick with
bottom and lock rails 180mm wide top rail and styles
100mm wide as per drawing and panels of 18mm thick
of exterior grade plain particle board including cost of
materials, labour, HOM of machineries complete as per
specifications. ( excluding cost of fixtures)
7.08 Providing and fixing in position shutters for doors made Sqm 3375.00 3249.00
out of Honne wood styles and rails of 35mm. thick with
bottom and lock rails 180mm wide top rail and styles
100mm wide as per drawing and panels of 18mm thick
of exterior grade Melamine impregnated prelamination
particle board of approved colour on both sides including
cost of materials, labour, HOM of machineries complete
as per specifications. ( excluding cost of fixtures )
7.09 Providing and fixing in position shutters for doors made Sqm 3389.00 3264.00
out of Honne wood styles and rails of 35mm. thick with
bottom and lock rails 180mm wide top rail and styles
100mm wide as per drawing and panels of 18mm thick
of exterior grade Melamine impregnated prelamination
particle board of approved colour on one side and
balancing white colour on the other including cost of
materials, labour, HOM of machineries complete as per
specifications. ( excluding cost of fixtures )
7.10 Providing and fixing in position Honne wood fully Sqm 4814.00 4563.00
panelled shutters for windows with styles and rails of
35mm. thick, 75mm wide in two halves with panels of
25mm thick including cost of materials, labour charges,
HOM of machineries complete as per specifications.
(excluding cost of fixtures )
7.11 Providing and fixing in position Matti / Nandi wood fully Sqm 3655.00 3682.00
panelled shutters for windows with styles and rails of
35mm. thick, 75mm wide in two halves with panels of
25mm thick including cost of materials, labour charges,
HOM of machineries complete as per specifications.
(excluding cost of fixtures )
60
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
7.12 Providing and fixing in position Honne wood fully Sqm 4282.00 4074.00
panelled shutters for windows with styles and rails of
30mm. thick, 75mm wide in two halves with panels of
20mm thick including cost of materials, labour charges,
HOM of machineries complete as per specifications.
(excluding cost of fixtures )
7.13 Providing and fixing in position Matti / Nandi wood fully Sqm 3316.00 3339.00
panelled shutters for windows with styles and rails of
30mm. thick, 75mm wide in two halves with panels of
20mm thick including cost of materials, labour charges,
HOM of machineries complete as per specifications. (
excluding cost of fixtures )
7.14 Providing and fixing in position Honne wood half Sqm 4466.00 4268.00
panelled shutters at bottom and half glazed at top for
indow shutters with styles and rails of 35mm. thick, 75mm
wide in two halves with panels of 25mm thick, 3mm thick
reeded glass for top panels fixed with wooden beading
including cost of materials, labour charges, HOM of
machineries complete as per specifications. ( excluding
cost of fixtures )
7.15 Providing and fixing in position Mathi / Nandi wood Sqm 3548.00 3570.00
half panelled shutters at bottom and half glazed at top
for window shutters with styles and rails of 35mm. thick,
75mm wide in two halves with panels of 25mm thick,
3mm thick reeded glass for top panels fixed with wooden
beading including cost of materials, labour charges, HOM
of machineries complete as per specifications. ( excluding
cost of fixtures )
61
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
62
Chapter - 8
Flooring
63
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
8.0 FLOORING
8.01 Providing and laying flooring and steps machine cut Sqm 2427.00 2432.00
granite slabs 40 mm thick on cement mortar bed
1:6, 25 mm thick, and pointed with cement mortar
1:3 over existing cement concrete bed, including cost
of materials, mortar labour, curing complete as per
specifications.
8.02 Providing and laying flooring and steps fine dressed Sqm 3241.00 3246.00
granite stone slabs 40 mm thick on cement mortar
bed 1:6, 25 mm thick, and pointed with cement mortar
1:3 over existing cement concrete bed , including cost
of materials, mortar,labour, curing complete as per
specifications.
8.03 Providing and laying flooring and steps fine machine Sqm 1183.00 1188.00
polished granite stone slabs 20 mm thick on cement
mortar bed 1:6, 20 mm thick, and joints finished with
cement mortar 1:3 over existing cement concrete
bed, including cost of materials, mortar,labour, curing
complete as per specifications
8.04 Providing and laying heavy duty cobble stones Sqm 1055.00 1059.00
60mm thick interlock pavers, using cement and
course sand for manufacture of blocks of approved
size, shape and colour with a minimum compressive
strength of 281 kg per sqm over 50mm thick sand
bed ( average thickness ) and compacting with plate
vibrator having 3 tons compaction force thereby forcing
part of sand underneath to come up in between joints,
final compaction of paver surface joints into its final
level , including cost of materials, labour and HOM of
machineries complete as per specifications.
8.05 Providing and laying heavy duty cobble stones Sqm 1113.00 1117.00
75mm thick interlock pavers, using cement and
course sand for manufacture of blocks of approved
size, shape and colour with a minimum compressive
strength of 281 kg per sqm over 50mm thick sand
bed ( average thickness ) and compacting with plate
vibrator having 3 tons compaction force thereby forcing
part of sand underneath to come up in between joints,
final compaction of paver surface joints into its final
level, including cost of materials, labour and HOM of
machineries complete as per specifications.
8.06 Providing and laying flooring with M15 cement Sqm 352.00 368.00
concrete 40 mm thick using broken granite 20mm
and down size laid to line and level in one layer and
64
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
65
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
8.12.2 _do_ for Ceramic Tiles of size 30x30cms 6mm thick Sqm 1208.00 1213.00
8.12.3 -do_ for Ceramic Tiles 400 x 400mm 6mm thick on a Sqm 1345.00 1352.00
bed of 20mm thick
8.12.4 For Ceramic Tiles 300 x 600mm 6mm thick on a bed Sqm 1345.00 1352.00
of 20mm thick
8.13 Providing skirting upto 30 cms. height with cement Sqm 321.00 326.00
mortar 1:3 finished with a floating coat of neat cement
including rounding off junctions floor, overall 15 mm
thick including cost of materials, labour, complete as
per specifications
8.14 Providing red oxide skirting upto 30 cms. height with Sqm 339.00 344.00
cement mortar 1:3 including rounding off junctions
with floor, finished overall 15 mm thick, top portion
5mm thick mixed with red oxide and a floating coat of
neat cement using 3.5kg of red oxide of iron per 50 kg
of cement including cost of materials, labour, complete
as per specifications
8.15 Providing skirting, dadooing, rises of steps with Sqm 1165.00 1170.00
white glazed tiles 6mm thick on 10mm thick cement
plaster 1:3 and jointed with white cement slurry over
existing rough plaster surface using glazed tiles of
approved make and size including cost of materials,
labour, complete as per specifications.
8.16 Providing skirting, dadooing, rises of steps with
colour glazed tiles 10mm thick on 10mm thick
cement plaster 1:3 and jointed with white cement slurry
over existing rough plaster surface using glazed tiles
of approved make and size including cost of materials,
labour, complete as per specifications.
8.16.1 Colour glazed tiles 15x15 cms 10 mm thick Sqm 1269.00 1274.00
8.16.2 Colour glazed tiles 30x60 cms 6mm thick with border Sqm 1630.00 1634.00
of size 30 x 10 cms
8.16.3 Colour glazed tiles 30x45 cms 10mm thick with Sqm 1273.00 1278.00
border of size 30 x 10 cms
8.17 Providing skirting, dadooing, rises of steps using Sqm 3866.00 3871.00
marble slabs with machine cut edges upto 25mms.
thick and not exceeding 30 cms. height on 10
mms. thick cement mortar 1:3 and jointed with white
cement slurry over existing rough plaster surface,
including cost of materials,mortar, labour, complete as
per specifications.
66
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
8.18 Providing and fixing Special make glazed Vitrified Sqm 1099.00 1099.00
tiles (Granomite finish) of approved make, quality
and colour of size 600x600x10mm thick fixed on
existing flooring with a special adhesive for flooring
and skirting and jointed with neat cement slurry mixed
with pigment to match the shade of tiles., including
providing spacers at required interval and removing
stains etc.,cost of materials,mortar,labour etc.,
complete as per specifications..
8.19 Providing and fixing glazed Vitrified tiles of approved Sqm 1034.00 1034.00
make, quality and colour of size 600x600x10mm
thick fixed on existing flooring with a special adhesive
for flooring and skirting and jointed with neat cement
slurry mixed with pigment to match the shade of tiles.,
including providing spacers at required interval and
removing stains etc.,cost of materials,mortar,labour
etc. complete as per specifications.
8.20 Providing and fixing glazed Vitrified tiles of approved Sqm 975.00 979.00
make, quality and colour of size 600x600x10mm
thick fixed on a bed of 12 mm thick cement mortar
for flooring and skirting and jointed with neat cement
slurry mixed with pigment to match the shade of tiles.,
including providing spacers at required interval and
removing stains etc., cost of materials,mortar,labour
etc.complete as per specifications.
8.21 Providing and laying pattern flooring for staircase Sqm 7185.00 7194.00
treads and risers using the combiantion of 20mm
thick ruby red granite @ 66%,20 mm thick grey
granite @ 20%, 20mm thick black granite 14%.
The granite meterials are laid with a bed of CM 1:3,
20mm thick pointed with colour pigment, including full
rounding for nosing, flaming the ruby red granite for 50
mm wide including cost of all materials,mortar,labour,
curing etc., complete as per specifications.
8.22 Providing and laying pattern flooring for staircase
treads and risers using the combiantion of 20mm thick
ruby red granite @ 66%,20 mm thick grey granite
@ 20%, 20mm thick black granite 14%. The granite
meterials are laid with a bed of CM 1:3, 20mm thick
pointed with colour pigment, including full rounding for
nosing, flaming the ruby red granite for 50 mm wide
including cost of all materials,mortar,labour, curing
etc., complete as per specifications.
8.22.1 -do- using Silver grey /Multy red / Ruby red / Black / Sqm 2737.00 2743.00
Hassan green granite of width not less than 1200mm.
67
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
8.22.2 do- using Black granite /Multy red / Ruby red / Black Sqm 2406.00 2412.00
/ Hassan green/River pink granite of width not less
than 900mm.
8.22.3 -do- using 10mm thickSilver grey /Multy red / Ruby Sqm 1398.00 1404.00
red / Black / Hassan green granite tiles
8.22.4 --do- using 19mm thick Raw silk / Black pearl granite Sqm 2736.00 2742.00
of width not less than 1200mm
8.22.5 do- using 19mm thick Raw silk / Black pearl granite of Sqm 2377.00 2383.00
width not less than 900 mm.
8.23 Providing and fixing of wall cladding using 20mm Sqm 3502.00 3507.00
thick gang saw water cut Shiva gold granite, grey
granite in CM 1:3 proportion cut to required shape,
pattern with paper joints, finished with cement mortal
using white cement and colour pigments to match the
colour of slab making through jointing with sealant,
making holes 25mmx12mm grooves in joints including
cost of all materials, mortar,labour,curing etc.,complete
8.24 Providing and fixing skirting of 300mm high using Mtr 757.00 759.00
prepolished water cut/gang saw of 19mm thick grey
granite 0.5mm wide chamfered width and depth and
fixing in CM 1:4 of 20mm thick after chipping the walls
etc.,including cost of all materials, mortar,labour,curing
etc.,complete
8.25 Providing and laying plat form using prepolished, Sqm 3525.00 3525.00
water cut / gang saw 40mm thick telephonic Black
Granite. laid on existing vertical -supports and fixing
in CM 1:3 proportion. Including cutting to required
shape, pattern with paper joints, including full rounding
for nosing, finished with cement mortar, pointed with
colour pigments to match the colour of slab making
through jointing with sealant, making holes 25mm x
12mm grooves in joints including cost of all materials,
mortar,labour,curing etc.,complete
8.26 Providing full nosing for 40mm thick granite Mtr 540.00 540.00
slab using required machinery including cost and
conveyance of all materials, labour for all items
of work, HOM of equipment etc., complete as per
specification
8.27 Providing half nosing for 40mm thick granite Mtr 360.00 360.00
slab using required machinery including cost and
conveyance of all materials, labour for all items
of work, HOM of equipment etc., complete as per
specification
68
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
8.28 Providing full nosing for 20mm thick granite Mtr 270.00 270.00
slab using required machinery including cost and
conveyance of all materials, labour for all items of work,
HOM of equipment etc., complete as per specification
8.29 Providing half nosing for 20mm thick granite Mtr 180.00 180.00
slab using required machinery including cost and
conveyance of all materials, labour for all items of work,
HOM of equipment etc., complete as per specification
8.30 Providing and fixing 40mm thick sadarhalli grey Sqm 1829.00 1834.00
flammed granite slab for bath areas in Bathrooms over
a bed of 25mm thick CM 1:6 and fixing granite slab
with CM 1:3.
8.31 Providing and fixing Ceramic tiles of size 400x400mm Sqm 1131.00 1136.00
for flooring, threads, steps and landing, laid on
a bed of 20mm thick cement mortar 1:3 mix flush
pointing with white cement mixed with matching colour
pigment including curing, cleaning etc., complete.
The work includes cost of all materials,mortar,labour
charges for all items of work, hire charges for
equipment, , etc., complete as per specification
8.32 Providing and fixing colour glazed tiles of size Sqm 1211.00 1216.00
300mmx600mm for walls with borders of size
300x100mm, set in Cement Mortar 1:3 and pointed
with white cement with matching colour pigment
with necessary curing, cleaning including providing
and removing scaffolding wherever necessary etc.,
complete. The work includes cost of all materials,
mortar,labour charges for all items of work, hire charges
for equipment, etc., complete as per specification
8.33 Providing and fixing colour glazed tiles of size Sqm 1031.00 1034.00
300mmx450mm for walls with borders of size
300x100mm, set in Cement Mortar 1:3 and pointed
with white cement with matching colour pigment
with necessary curing, cleaning including providing
and removing scaffolding wherever necessary etc.,
complete. The work includes cost of all materials,mortar,
labour charges for all items of work, hire charges for
equipment, etc., complete as per specification
69
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
8.34.1 Do- with gray granite 20 mm thick gangsaw with Sqm 2411.00 2416.00
minimum width 1200
8.34.2 Do- with sadharalli 20 mm thick gangsaw with Sqm 2293.00 2298.00
minimum width 1200
70
Chapter - 9
Finishing Works
71
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
72
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
9.09 Providing 15mm thick cement plaster in single coat Sqm 219.00 222.00
with cement mortar 1:4, to brick masonry including
rounding off corners wherever required smooth
rendering, : Providing and removing scaffolding,
including cost of materials, labour, curing complete as
per specifications
9.10 Providing 15mm thick cement plaster in single coat Sqm 206.00 209.00
with cement mortar 1:6 to brick masonry including
rounding off corners wherever required smooth
rendering, : Providing and removing scaffolding,
including cost of materials, labour, curing complete as
per specifications.
9.11 Providing 18mm thick cement plaster in single coat Sqm 273.00 278.00
with cement mortar 1:3, to brick masonry including
rounding off corners wherever required smooth
rendering, : Providing and removing scaffolding,
including cost of materials, labour, curing complete as
per specifications
9.12 Providing 18mm thick cement plaster in single coat Sqm 258.00 262.00
with cement mortar 1:4, to brick masonry including
rounding off corners wherever required smooth
rendering, : Providing and removing scaffolding,
including cost of materials, labour, curing complete as
per specifications
9.13 Providing 18mm thick cement plaster in single coat Sqm 243.00 246.00
with cement mortar 1:6 to brick masonry including
rounding off corners wherever required smooth
rendering, : Providing and removing scaffolding,
including cost of materials, labour, curing complete as
per specifications.
9.14 Providing 20mm thick cement plaster in single coat Sqm 285.00 291.00
with cement mortar 1:3, to stone masonry & concrete
surface including rounding off corners wherever
required smooth rendering,including providing and
removing scaffolding, cost of materials, labour, curing
etc.,complete as per specifications.
9.15 Providing 20mm thick cement plaster in single coat Sqm 269.00 274.00
with cement mortar 1:4, to stone masonry / concrete
surface including rounding off corners wherever
required smooth rendering, : Providing and removing
scaffolding, including cost of materials, labour,
curingcomplete as per specifications.
9.16 Providing 20mm thick cement plaster in single coat Sqm 254.00 258.00
with cement mortar 1:6 to stone masonry / concrete
73
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
74
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
9.25 Extra for providing and mixing waterproofing Sqm 8.60 8.60
compound in cement plaster for birck masonry work
at one kg per bag or in the proportion recommended
by the manufacturers, for cement mortar 1:4, 20mm
thick cost of materials complete as per specifications.
9.26 Providing rough cement plastering 15mm thick Sqm 203.00 207.00
in single coat with cement mortar 1:4, to brick
masonry for base of dadooing works with sand of
approved quality, providing and removing scaffolding,
including cost of materials, labour, curing complete as
per specifications
9.27 Providing rough cement plastering 15mm thick in Sqm 191.00 194.00
single coat with cement mortar 1:6 to brick masonry
for base of dadooing works with sand of approved
quality, providing and removing scaffolding, including
cost of materials, labour, curing complete as per
specifications.
9.28 Providing floating coat of cement to plastering and Sqm 18.40 18.90
finishing smooth , including cost of materials, labour,
curing complete as per specifications.
9.29 Providing lime rendering for plastering to wall and Sqm 32.00 32.00
ceiling , including cost of materials, labour, curing
complete as per specifications.
9.30 Providing and fixing suitable plaster mesh 100mm Mtr 25.00 25.00
wide manufactured out of hot dipped galvanised iron
of nominal thickness 0.35mm with a zinc coating of
120gms per sqm width, along route of walls chipped
for services, junction between RCC and brick walls
including cost of materials, labour for fixing complete
as per specifications. ( length of mesh only be
measured for payment )
9.31 Providing and fixing suitable plaster mesh 150mm Mtr 31.00 31.00
wide manufactured out of hot dipped galvanised iron
of nominal thickness 0.35mm with a zinc coating of
120gms per sqm width, along route of walls chipped
for services, junction between RCC and brick walls
including cost of materials, labour for fixing complete
as per specifications. ( length of mesh only be
measured for payment )
9.32 Providing and fixing suitable plaster mesh 200mm Mtr 36.00 36.00
wide manufactured out of hot dipped galvanised iron
of nominal thickness 0.35mm with a zinc coating of
120gms per sqm width, along route of walls chipped
for services, junction between RCC and brick walls
75
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
76
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
9.37 Providing and applying painting in two coats with Sqm 86.80 86.80
plastic emulsion paint of approved brand on wall
surface to give an even approved shade after throughly
brushing the surface, free from mortar drops and other
foreign matter including preparing the surface even
and sand paper smooth, cost of materials, labour,
complete as per specifications.
9.37.1 do- with primer Sqm 90.00 90.00
9.37.2 Extra over Item 9.37 for painting two coats with plastic Sqm 5.00 5.00
emulsion paint of approved brand and shade on ceiling
and / or sloping roof as per specifications.
9.38 Providing and applying painting in one coat with Sqm 55.90 55.90
plastic emulsion paint of approved brand and
manufacture on wall surface to give an even approved
shade after throughly brushing the surface, free
from mortar drops and other foreign matter including
preparing the surface even and sand paper smooth,
cost of materials, labour, complete as per specifications
9.38.1 Extra over Item 9.38 for painting with one coat plastic Sqm 4.00 4.00
emulsion paint of approved brand and shade on ceiling
and / or sloping roof as per specifications.
9.39 Providing and finishing external walls in two coats Sqm 89.00 89.00
with waterproof cement paint of approved brand and
shade to give an even shade after throughly brooming
the surface to remove all dirt and loose powdered
material, free from mortar drops and other foreign
matter cost of materials, labour, complete as per
specifications.
9.39.1 -do- with primer Sqm 102.00 102.00
9.40 Providing and finishing external walls in one coat with Sqm 51.00 51.00
waterproof cement paint of approved brand and
shade to give an even shade after throughly brooming
the surface to remove all dirt and loose powdered
material, free from mortar drops and other foreign
matter cost of materials, labour, complete as per
specifications.
9.40.1 -do- with primer Sqm 47.00 47.00
9.41 Applying priming coat over new wood surface Sqm 43.00 43.00
and / or wood based surface with white lead paint
priming including preparing the surface after throughly
cleaning oil, grease, dirt and foreign matter, sand
papering and knotting ready mix paint including cost
of materials, labour, complete as per specifications.
77
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
9.42 Applying priming coat over new wood surface and Sqm 46.00 46.00
/ or wood based surface after brushing with wood
primer pink paint including preparing the surface
after throughly cleaning oil, grease, dirt and foreign
matter, sand papering and knotting ready mix paint
including cost of materials, labour, complete as per
specifications
9.43 Applying priming coat over new wood surface and / Sqm 42.00 42.00
or wood based surface after brushing with aluminium
paint primer, water resistant including preparing the
surface after throughly cleaning oil, grease, dirt and
foreign matter, sand papering and knotting ready mix
paint including cost of materials, labour, complete as
per specifications.
9.44 Applying priming coat over new wood surface and Sqm 49.70 49.70
/ or wood based surface, after brushing with ready
mix eanmel priming paint including preparing the
surface after throughly cleaning oil, grease, dirt and
foreign matter, sand papering and knotting ready mix
paint including cost of materials, labour, complete as
per specifications.
9.45 Applying priming coat over new wood surface Sqm 49.50 49.50
and / or wood based surface after preparing the
surface after throughly cleaning oil, grease, dirt and
foreign matter, sand papering and knotting liquid wood
filler, for varnish including cost of materials, labour,
complete as per specifications.
9.46 Providing and applying painting two coats ( Sqm 96.90 96.90
excluding priming coat ) on new wood surface
and / or wood based surface with enamel paint to give
an even shade, cleaning the surface of all dirt, dust
and foreign matter, sand papering including cost of
materials, labour, complete as per specifications.
9.46.1 Extra over Item No. 9.46 for applying every Sqm 55.00 55.00
subsequent coat of enamel paint to give an even
shade after cleaning the surface of all dirt, dust
and foreign matter, sand papering including cost of
materials, labour, complete as per specifications.
9.47 Providing and applying painting one coat ( excluding Sqm 61.90 61.90
priming coat ) on new wood surface and / or wood
based surface with enamel paint to give an even shade
after cleaning the surface of all dirt, dust and foreign
matter, sand papering including cost of materials,
labour, complete as per specifications.
78
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
9.47.1 Extra over Item No.9.47 for applying every subsequent Sqm 55.00 55.00
coat of enamel paint to give an even shade after
cleaning the surface of all dirt, dust and foreign matter,
sand papering including cost of materials, labour,
complete as per specifications.
9.48 Providing and applying polishing with french polish Sqm 202.00 202.00
on new wood surface and / or wood based surface
to give an even surface after cleaning the surface of
all dirt, dust and foreign matter, sand papered smooth,
including cost of wood filler and materials, labour,
completeas per specifications.
9.49 Providing and applying polishing with french polish Sqm 104.00 104.00
over previously polished wood or wood based
surface to give an even surface after cleaning the
surface of all dirt, dust and foreign matter, sand
papered smooth, including cost of wood filler and
materials, labour, complete as per specifications.
9.50 Providing and applying wax polish in single coat on Sqm 46.60 46.60
new wood surface and / or wood based surface,
with bees wax polish in proportion of 2:1.5:1:0.5
(2 bees wax : 1.5 linseed oil : 1 turpentine oil : 0.5
varnish by weight) to give an even surface after
cleaning the surface of all dirt, dust and foreign matter,
sand papered smooth, including cost of materials,
labour, complete as per specifications.
9.51 Applying red lead ready mix priming coat over new Sqm 41.00 41.00
steel or other metal surface including preparing the
surface after throughly cleaning oil, grease, dirt and
other foreign matter, and scoured with wire brushes,
fine steel wool, sand papers including cost of materials,
labour,complete as per specifications.
9.52 Providing and applying enamel metal paint two Sqm 95.00 95.00
coats ( excluding priming coat ) over new steel or
other metal surface brushing to give an even shade
after cleaning oil, grease, dirt and other foreign matter,
including cost of materials, labour, complete as per
specifications.
9.53 Providing and applying enamel metal paint one coat Sqm 61.00 61.00
(excluding priming coat) on previously painted
steel or other metal surface brushing to give an even
shade after cleaning oil, grease, dirt and other foreign
matter, including cost of materials, labour, complete as
per specifications.
79
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
9.54 Providing and applying alluminium paint two coats Sqm 73.80 73.80
(excluding priming coat) over new steel or other
metal surface brushing to give an even shade after
cleaning oil, grease, dirt and other foreign matter,
including cost of materials, labour, complete as per
specifications.
9.55 Providing and applying black japan paint one coat Sqm 46.00 46.00
(excluding priming coat) on previously painted
steel or other metal surface brushing to give an even
shade after cleaning oil, grease, dirt and other foreign
matter, including cost of materials, labour, complete as
per specifications
9.56 Extra for applying every subsequent black japan Sqm 39.90 39.90
paint on previously painted steel or other metal surface
brushing to give an even shade after cleaning of oil,
grease, dirt and other foreign matter, including cost of
materials, labour, complete as per specifications.
9.57 Providing and applying spray painting in two coats Sqm 84.70 84.70
(excluding priming coat) over concrete / masonry /
asbestos cement sheet / plastered surfaces with flat
wall paint of approved brand to give even shade after
cleaning the surface of all dirt, dust and other foreign
matter, and sand papering including cost of materials,
labour, complete as per specifications
9.58 Providing and applying spray painting in one coat Sqm 54.50 54.50
(excluding priming coat) over concrete / masonry /
asbestos cement sheet / plastered surfaces with flat
wall paint of approved brand to give even shade after
cleaning the surface of all dirt, dust and other foreign
matter, and sand papering including cost of materials,
labour, complete as per specifications.
9.59 Providing and applying wax polish on new concrete Sqm 43.60 43.60
floor and vertical plastered surface using approved
brand to give an even shade after preparing the
surface after throughly cleaning oil, dirt, dust other
foreign matter, including cost of materials, labour,
complete as per specifications.
9.60 Providing and applying wax polish on previously Sqm 42.70 42.70
polished concrete floor and vertical plastered
surface using wax polish of approved brand to give
an even shade after preparing the surface after
throughly cleaning oil, dirt, dust and other foreign
matter including cost of materials, labour, complete as
per specifications. Previously Polished Concrete Floor
80
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
81
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
82
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
83
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
84
Chapter - 10
PIPE LINE AND
MISCELLENEOUS WORKS
85
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
86
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
87
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
88
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
89
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
90
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
91
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
10.11.5 Fixing of Gland Cock of all sizes (15mm to 65mm) No 23.00 23.00
92
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
10.13 Providing and constructing four way CI stand post of Each 3974.00 3974.00
size 1.80 m x 1.80 m with pot rests of size 0.3m x0.3m
x 0.15m in cement concrete M-15 with central dip and
with cement concrete kerb (CC M-15) of 0.2m thick
and 0.1m wide alround with M-15 cement concrete
platform of 0.1m thick and smooth finishing with CM
1:3 to exposed faces with necessary formwork and
curing including construction of lead-off drain to a
length of 1.5m as per the directions of the department
and necessary earthwork excavation and disposing off
the excavated earth as directed with all leads and lifts
etc., complete.
10.14 Providing and constructing stand post of size Each 6045.00 6045.00
1.22mx1.22m for public fountain with stone posts
of size 0.45x1.22x0.10m with top rounded with holes
of 25mm size with stone pot rest of 0.45x0.30x0.20m
with central dip and kerb stone 8 cms thick 20 cms
wide alround with top rounded with cement concrete
plat form 1:2:4, 10cms thick and smooth finishing with
cement mortar 1:3 to the exposed faces with necessary
frame work and curing including two line dressing to all
stones exposed and construction of lead off drains as
per directions of departmental officers and necessary
earthwork excavation and disposing off the excavated
earth as directed with all leads and lifts etc.,complete.
10.15 RCC hume pipe Circular pump house: Supplying Each 16000.00 16000.00
precast RCC Circular Hume pipe pump house with
M.S door and RCC conical roof as per specification
and drawings - Internal dia Mtr. 1200 mm & height of
2.5 Mtr. With Wall thickness 65mm
10.16 Erection and positioning of RCC Hume pipe pump Each 1887.00 1883.00
house/Cistern on size stone masory platform including
transportation charges and handling,finishing with all
necessary tools ,plants and materials etc.,complete as
directed by the Engineer in charge of the work.
10.17 Supplying,,laying of CI flanged pipe true to line/hoisting
of CI flanged pipe confirming to IS 7181-1986 with
latest amendments in position and aligning to correct
plumb including cost of jointing material,conveying to
work spot with all lead and lifts etc complete
a) 80mm Mtr 1968.00 1968.00
b) 100mm Mtr 2399.00 2399.00
c) 150mm Mtr 3656.00 3656.00
93
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
94
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
95
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
96
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
97
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
98
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
99
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
100
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
101
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
102
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
103
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
104
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
105
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
106
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
107
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
108
Chapter - 11
Well Sinking
109
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
110
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
111
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
112
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
11.12.2 6 Mtr inner dia Well from 3 Mtr to 6 Mtr. Depth Rmtr 55817.00 56024.00
11.12.3 6 Mtr inner dia Well from 6 Mtr to 9 Mtr. Depth Rmtr 63928.00 64152.00
11.12.4 6 Mtr inner dia Well from 9 Mtr to 12 Mtr. Depth Rmtr 74309.00 74551.00
OPEN WELL
11.13 Earthwork excavation in soil, clay, sand, shedu soil, Cum 323.00 323.00
soft murrum, including shoring, strutting, barricading,
danger lighting, bailing out water wherever necessary
with stacking the materials as directed upto a lead of
50 Mtr and lift of 1.5 Mtr etc., complete.
11.13.1 Add for additional lift charges for every lift of 1.50 M Cum 57.00 57.00
or part thereof beyond 1.50 Mtr to 10.50 Mtr
11.13.2 Add for additional lift charges for lift beyond 10.50 Cum 118.00 118.00
Mtr to 21.00 Mtr
11.14.1 Add for additional lift charges for every lift of 1.50 M Cum 87.00 87.00
or part thereof beyond 1.50 Mtr to 10.50 Mtr
11.14.2 Add for additional lift of 1.50 Mtrs or part thereof Cum 130.00 130.00
beyond 10.50Mtr to 21.00 Mtr.
11.15 Earthwork excavation in soft rock including shoring, Cum 731.00 731.00
strutting, barricading, danger lighting, bailing out water
wherever necessary with stacking the materials as
directed upto a lead of 50 Mtr and lift of 1.5 Mtr etc.,
complete
11.15.1 Add for additional lift charges for every lift of 1.50M Cum 130.00 130.00
or part thereof beyond 1.50Mtr to 10.50 Mtr
11.15.2 Add for additional lift of 1.50 Mtrs or part thereof Cum 174.00 174.00
beyond 10.50Mtr to 21.00 Mtr.
11.16 Earthwork excavation in hard rock requiring blasting Cum 1507.00 1507.00
including shoring, strutting, baricading, danger lighting,
bailing out water wherever necessary with stacking
the materials as directed upto a lead of 50 Mtr and lift
of 1.5 Mtr etc., complete
11.16.1 Add for additional lift charges for lift 1.50M or part Cum 217.00 217.00
thereof beyond 1.50 Mtr to 10.50 Mtr
113
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
11.16.2 Add for additional lift charges for lift 1.50M lift or part Cum 348.00 348.00
thereof beyond 10.50 Mtr to 21.00 Mtrs
Note :-
1)For Sl. No. 11.13,11.14, 11.15 & 11.16, 30% of
basic rate shall be deducted if excavation work is
done in dry condition.
2) For mechnical means refer rates in chapter-2
from Item. 2.30 to 2.30.3
3) Extra lifts rates for well works in classification
by manual means ref extra lift as in Sl No. 2.29.9 a
to 2.29.9 i
11.17 Providing and laying in position plain cement Cum 6120.00 6371.00
concrete of grade M 10 with cement @ 220kgs,
with 40mm and down size graded granite metal
coarse aggregates @0.892cum and fine aggregtes
@ 0.465cum machine mixed, machine mixed,
concrete laid in layers not exceeding 15 cms. thick,
well compacted, including cost of all materials, labour,
HOM of machinery, curing,lowering to any depth,
dewatering etc., complete as per specifications with
all lead and lifts for Foundation of steining.
11.18 Providing and constructing C.R. IInd sort size stone Cum 6522.00 6485.00
masonry with approved quality of hard, granite or trap
or basalt of sand stone in CM 1:6 proportioin, course
not less than 20cms high with bond stones spaced at
2 Mtrs. Apart to its full width in each course including
scaffolding dewatering, curing etc., complete as per
specificaitons for Circular steining
11.19 Providing and laying in position plain cement Cum 9000.00 9389.00
concrete of grade M 10 with cement @ 220kgs,
with 20mm and down size graded granite metal coarse
aggregates @0.84cum and fine aggregtes @ 0.56cum,
machine mixed, concrete laid in layers not exceeding
15 cms. thick,well compacted, for circular steining,
ring bond slab, including cost of all materials, labour,
HOM of machinery, curing and with smooth finishing
to exposed faces, and with necessary centering,
formwork, scaffolding and dewatering etc.,complete
as per specifications.
11.20 Supplying & errection of RCC rings for well steining
of 0.3 Mtr Depth using M-20 grade concrete using
clean graded granite or trap or jelly of approved
quality 20mm and down size well compacted including
centering, formwork and plastering for both faces with
C.M 1:3 proportion as per design using 6.50mm M.S.
coil at the rate of 10 Kgs/ring including cost of steel
and fabrication, bailing out of water, errection etc.,
complete.
114
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
11.20.1 For 1.80m dia (clear) rings of steining thickness Each 1509.00 1573.00
0.075mm upto 18 M depth
11.20.2 For 1.50m dia (clear) rings of steining thickness Each 1272.00 1325.00
0.075mm upto 18 M depth
11.20.3 For 1.20m dia (clear) rings of steining thickness Each 1038.00 1147.00
0.075mm upto 18 M depth
11.21 Supplying & errection of RCC rings for well Each 4540.00 4981.00
steining of 0.3 Mtr Depth using M-20 grade concrete
using clean graded granite or trap or jelly of approved
quality 20mm and down size well compacted including
centering, from work and plastering for both faces
with C.M 1:3 proportion as per design using 6.50mm
M.S. coil at the rate of 25 Kgs/ring including cost of
steel and fabrication, bailing out of water, errection
etc., complete. For 3.00m dia (clear) rings of steining
thickness 0.15m upto 18 M depth
11.22 Providing and filling with boulders or rubble of Cum 1685.00 1704.00
approved size and quality, including hand packing,
wedging, filling in voids with quarry spalls and clean
sand etc., complete with all lead and lifts, etc., complete
11.23 Refilling the excavated stuff in layers of 15cms thick Cum 197.00 197.00
including watering and consolidation etc., complete
with all lead and lifts, etc., complete
115
Chapter - 12
PUMPSETS & ACCESSORIES
116
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
117
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
118
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
12.02.1 3.00 HP
a) 3.00 HP - 300 LPM @ 26 m = 2 STG Outlet Dia - 2.50" Each 22895.00 22895.00
b) 3.00 HP - 155 LPM @ 42 m = 3 STG Outlet Dia - 2.00" Each 27993.00 27993.00
c) 3.00 HP - 135 LPM @ 56 m = 4 STG Outlet Dia - 2.00" Each 25738.00 25738.00
d) 3.00 HP - 120 LPM @ 55 m = 5 STG Outlet Dia - 2.00" Each 27243.00 27243.00
e) 3.00 HP - 90 LPM @ 66 m = 6 STG Outlet Dia - 2.00" Each 30390.00 30390.00
12.02.2 4.00 HP
a) 4.00 HP - 360 LPM @ 30 m = 2 STG Outlet Dia - 3.00" Each 15167.00 15167.00
b) 4.00 HP - 245 LPM @ 42 m = 3 STG Outlet Dia - 2.50" Each 25606.00 25606.00
c) 4.00 HP - 155 LPM @ 56 m = 4 STG Outlet Dia - 2.00" Each 28053.00 28053.00
d) 4.00 HP - 135 LPM @ 70 m = 5 STG Outlet Dia - 2.00" Each 31834.00 31834.00
e) 4.00 HP - 120 LPM @ 77 m = 7 STG Outlet Dia - 2.00" Each 31274.00 31274.00
f) 4.00 HP - 90 LPM @ 88 m = 8 STG Outlet Dia - 2.00" Each 33299.00 33299.00
12.02.3 5.00 HP
a) 5.00 HP - 300 LPM @ 39 m = 3 STG Outlet Dia - 2.50" Each 25526.00 25526.00
b) 5.00 HP - 245 LPM @ 56 m = 4 STG Outlet Dia - 2.50" Each 26437.00 26437.00
c) 5.00 HP - 155 LPM @ 70 m = 5 STG Outlet Dia - 2.00" Each 30905.00 30905.00
d) 5.00 HP - 135 LPM @ 84 m = 6 STG Outlet Dia - 2.00" Each 29236.00 29236.00
e) 5.00 HP - 120 LPM @ 88 m = 8 STG Outlet Dia - 2.00" Each 32337.00 32337.00
f) 5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - Each 35919.00 35919.00
2.00"
12.02.4 6.50 HP
a) 6.50 HP - 360 LPM @ 45 m = 3 STG Outlet Dia - 3.00" Each 19811.00 19811.00
b) 6.50 HP - 300 LPM @ 52 m = 4 STG Outlet Dia - 2.50" Each 28157.00 28157.00
c) 6.50 HP - 245 LPM @ 70 m = 5 STG Outlet Dia - 2.50" Each 29440.00 29440.00
d) 6.50 HP - 155 LPM @ 84 m = 6 STG Outlet Dia - 2.00" Each 34311.00 34311.00
119
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
120
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
121
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
122
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
123
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
12.09 Supply and delivery at site best indigenous brand kVAR 450.00 450.00
new power capacitor as per IS 2834/1986 with latest
amendments with KPTCL authorities and erection,
electrification and commissioning of the same at the
location of respective pump sets.
12.10 Supply and delivery at site delivery of best indigenous per 3 1025.00 1025.00
brand new MCB (Miniature Circuit Breakers) of poles
required capacity as per IS 88228/1978 and its latest
amendments and with ISI Mark of 6/10/16/20/25/40
Amps with scalable box.
12.11 Supply and delivery of galvanized mild steel tubes of
6 mtr standard length heavy class (C Class) as per
IS 1239 (Part-I) 1990 with latest amendments with ISI
Mark (one end fitted with heavy duty collar and other
end fitted with protective cover)
a) 50mm Each 2778.00 2778.00
b) 65mm Each 3402.00 3402.00
c) 80mm Each 4098.00 4098.00
12.12 Supply and delivery at site 50mm(2”) dia heavy duty Mtr 498.00 498.00
unplasticized PVC Column pipes with heavy duty
collers,rubber profile ring,vibration control profile
ring,freezing and turbulence free leak proof EPDM
ring with ISI mark with its latest amendments
12.13 Supply and delivery at site 50mm(2”) dia heavy duty Set 1485.00 1485.00
CI adopter set complete suitable for uPVC Column
pipes for Submersible pumpsets
12.14 Supply and delivery at site Accessories for Single Set 4125.00 4125.00
Phase pumpset like SS Groove Nipples,SS Studs &
Nuts,Screw Clips &water proof Insulation Tape etc
complete with ISI mark
12.15 Supply and delivery at site Stringing of heavy duty Mtr 37.00 37.00
Naylone/PP rope with ISI etc complete suitable for
Single phase Pumpsets.
12.16 Labour charges for Erection, Electrification and Job 5650.00 5650.00
commissioning works of Pump sets including aligning
and balancing with all necessary erection of materials
and labour including supply and erection of two pair
of supporting clamps, bore well caps, cable clips and
124
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
125
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
126
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
12.25 Supply and delivery at site brand new best make level No. 603.00 603.00
guage suitable for centrifugal pump confirming to
latest IS standards.
12.27 Supply, delivery, erection and commissioning at site Each 2818.00 2818.00
lighting distribution board suitable for monoblock
centrifugal pump confirming with ISI mark and its
latest amendments.
12.29 Earthing: Supplying and fixing and wiring earth Job Work Refer Item Refer Item
electrode for grounding circuits IC cutouts and other No. 12.23 No. 12.23
equipments on the meter board in the pit confirming to
IS 3049/1968. The pits should be filled up with equal
proportion of salt and charcoal 150mm around the
pipe to complete depth. The connection from the pipe
to the conduits etc. is to established through GI wire of
sizes as per clause 7.3.3 of IS 732 using 12mm bolts,
nuts, washers and check nuts, the pipe shall have 16
through holes of 12mm dia.
12.30 Supplying and fixing LT cable of size 4 x 25 Sqmm Rmt 297.00 297.00
suitable for centrifugal pump sets with ISI mark and its
latest amendments.
12.31 Supply and delivery at site brand new best make Each 282.00 282.00
Foot valve suitable for centrifugal pump upto 10HP
confirming with ISI mark and its latest amendments.
12.32 Supply and delivery at site brand new best make Foot Each 1717.00 1717.00
valve suitable for centrifugal pump above 12.50HP
confirming with ISI mark and its latest amendments.
127
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
128
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
129
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
130
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
131
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
132
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
e) V-T Pump impeller and neck ringning reconditioning Each 9940.00 9940.00
180 to 200 HP
12.36.4 HORIZANTAL PUMP
a) Phosphorous bronze bushes for 7.5 to 15 HP Each 420.00 420.00
monoblock motor
b) Phosphorous bronze bushes for 20 HP monoblock Each 980.00 980.00
motor
c) Phosphorous bronze bushes for 40HP to 80HP Each 2940.00 2940.00
monoblock motor
d) Phosphorous bronze bushes for 100HP to 120HP Each 5880.00 5880.00
monoblock motor
e) Phosphorous bronze bushes for 150HP to 200 HP Each 8540.00 8540.00
monoblock motor
12.36.5 BEARING FOR PUMP 0
a) For 20 HP pump bearing Each 1295.00 1295.00
b) For 30 HP Pump bearing Each 1736.00 1736.00
c) For 40 to 80 HP pump bearing Each 2660.00 2660.00
d) For 60 to 80 HP pump bearing Each 4480.00 4480.00
e) For 100 to 150HP pump bearing Each 8960.00 8960.00
f) For 180 to 200 HP pump bearing Each 12950.00 12950.00
12.37 ALL TYPES OF JACK WELL V-T PUMP DETAILS
as per ISI specifiction with guarantee period of not
less than 12 months
12.37.1 Pump dismentaling and refitting after attending
repairs
a) Up to 60 HP Each 8750.00 8750.00
b) 60 HP to 120 HP Each 10150.00 10150.00
c) 120 HP to 200 HP Each 11200.00 11200.00
d) 200 HP to 250 HP Each 12600.00 12600.00
12.37.2 Top body bush fitting
a) Up to 60 HP Each 770.00 770.00
b) 60 HP to 120 HP Each 980.00 980.00
c) 120 HP to 200 HP Each 1050.00 1050.00
d) 200 HP to 250 HP Each 1120.00 1120.00
133
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
134
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
135
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
136
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
137
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
1. Total head 30 mtrs and shut off dynamic Head 45 Each set 267000.00 267000.00
mtrand water out put 96000 ltrs/day.
2. Total head 50 mtrs and shut off dynamic Head 75 Each set 270000.00 270000.00
mtrand water out put 57000 ltrs/day.
3 Total head 70 mtrs and shut off dynamic Head 100 Each set 273000.00 273000.00
mtrand water out put 39000 ltrs/day
1 Total head 50 mtrs and shut off dynamic Head 70 Each set 383000.00 383000.00
mtrand water out put 91200 ltrs/day
2. Total head 70 mtrs and shut off dynamic Head 100 Each set 386000.00 386000.00
mtrand water out put 62400 ltrs/day
1.Total head 50 mtrs and shut off dynamic Head 70 Each set 383000.00 383000.00
mtr and water out put 91200 ltrs/day.
2. Total head 70 mtrs and shut off dynamic Head 100 Each set 386000.00 386000.00
mtr and water out put 62400 ltrs/day.
138
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
3.Total head 100 mtrs and shut off dynamic Head 150 Each set 389000.00 389000.00
mtr and water out put 40800 ltrs/day.
139
Chapter - 13
Bore Well
140
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
141
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
142
Chapter - 14
WATER PURIFICATION PLANTS
143
Zone-A Zone-B
Sl. No. Description Unit
Rs. Ps. Rs. Ps.
144
Chapter - 15
Miscellaneous
145
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.01 Water treatment plant for the flow rate of 10000 LPH
(0.16 M.L.D) with 16 hour pumping
Design parameter-Supply installation and commissioning
of the water treatment plant capable to treat the water
and make it potable at the flow rate of 10000 LPH with
suspended solids level less than 2000 ppm, and PH value
and biological impurities beyond permissible limits of
potable water parameters.
I COAGULENT DOSING SYSTEM No 175000.00 175000.00
Supply, Delivery, Installation and Commissioning of
Agitator & Coagulant Dosing System with required
accessories etc. complete for connecting to rising main
and including the cost of vessel, stirrer, storage tank and
dosing system and also the cost of lead, lift and labour
and maintenance of the equipments during the defect
liability period of 12 months and confirming to the following
specifications and as directed by Engineer - In- Charge:
Agitator
MOC of Flash mixer Vessel and FRP/Hdpe
Storage
Capacity of vessels 500 liters
Diameter of mixing vessel 895 mm
Height of mixing vessel 940 mm
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
Coagulant dosing System
Type of dosing pump Mechanically
actuated diaphragm
type with drive motor
MOC of dosing pump head P.P.
MOC of diaphragm P.T.F.E.
MOC of gear housing for pump C.I. (powder coated)
MOC of pump and base M.S. powder coated
MS Stand 1 no (To mount the
dosing system)
Polymer dosing System
Type of dosing pump Differencial doasing
system
146
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
147
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
148
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
149
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
150
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
151
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
152
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
Agitator
MOC of Flash mixer Vessel and FRP/Hdpe
Storage
Capacity of vessels 500 liters
Diameter of mixing vessel 895 mm
Height of mixing vessel 940 mm
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
Coagulant dosing System
Type of dosing pump Mechanically
actuated diaphragm
type with drive motor
MOC of dosing pump head P.P.
MOC of diaphragm P.T.F.E.
MOC of gear housing for pump C.I. (powder coated)
MOC of pump and base M.S. powder coated
MS Stand 1 no (To mount the
dosing system)
Polymer dosing System
Type of dosing pump Differencial doasing
system
Capacity of vessels 300 liters
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
MS Stand 1 no (To mount the
dosing system)
II STATIC MIXER FLOCCULATION TANK (S.M.F.T ) No 549500.00 549500.00
Design, fabrication, supply, erection, testing and
commissioning of Static Mixer Flocculation Tank
(SMFT) Circular shape made of Flocculator shaft and
blades of MOC SS-304 & Flocculation Tank made of MOC
-M.S as per IS-2062 and grade BR with a Retention time
of 20 Minits , with all accessories cost of all materials,
machinery, labour, cutting, aligning,anchoring, welding,
finishing, cleaning required accessories and installation
of S.M.F.T using the crain on the pre constructed platform
Etc., Complete with connecting the MS platform between
SMFT tank and Lamella Clarifier and confirming to the
153
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
154
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
Total no of lamellaplates 7 No
Sludge storage Hopper type with
sludge drain and
necessary valves
Walkway for Operation and 4" C section with
meintenance chequgard plate of 4
mm thick Around the
lamella
Ladder with raling to reach 3" L section with
walkway on top of lamella Round tube for raling
IV CLARIFIED WATER STORAGE TANK No 263900.00 263900.00
Providing, Supplying & Installation of Storage System
(Ground Level Storage Reservoir) using Prefabricated
Corrosion resistant Zincalume steel structures made
of as per IS- 15961 for intermediate balancing tank (filter
feed tank) and confirming to the following specifications:
Diameter of wall – 3690 mm and Height of wall (Excluding
Doom roof) to be 2080 mm. The Material of construction
of walls, liner and Doom roof to be Zincalume steel,
Heavy Duty PVC Food grade and Zincalume sheets in
knockdown form respectively to be assembled at site
as per the drawings. Heavy duty hot dipped galvanized
external ladder (1 no) to be provided along with heavy duty
hot dipped galvanized access hatch. The rate is inclusive
of the cost of installation of tank on sand bed with bold
down clamps & 4 nos of Nozzles made of Galvanized steel
to be provided for Inlet, Outlet, Drain and overflow.
MOC of Storage System Zincalume steel
(IS 15961)
Diameter of tank 3690 mm
Height of tank (Excluding doom 2080 mm
roof)
MOC of wall panels Zincalume alloy
coated steel
MOC of Liner Heavy Duty PVC
Food grade
MOC of Doom roof Zincalume alloy
coated High tensile
steel
External ladder Heavy duty hot
dipped galvanized
(1 no)
155
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
157
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
159
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
160
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
161
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
162
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
163
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
164
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
165
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
166
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
168
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
169
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
170
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
171
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
172
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
173
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
174
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
175
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
176
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
177
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
178
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.06 Water treatment plant for the flow rate of 55000 LPH (
0.88 M.L.D ) with 16 hour pumping
179
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
180
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
181
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
182
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
183
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
184
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
185
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
Agitator
MOC of Flash mixer Vessel and FRP/Hdpe
Storage
Capacity of vessels 1000 liters
Diameter of mixing vessel 1080 mm
Height of mixing vessel 1205 mm
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
Coagulant dosing System
Type of dosing pump Mechanically
actuated diaphragm
type with drive motor
MOC of dosing pump head P.P.
MOC of diaphragm P.T.F.E.
MOC of gear housing for pump C.I. (powder coated)
MOC of pump and base M.S. powder coated
MS Stand 1 no (To mount the
dosing system)
Polymer dosing System
Type of dosing pump Differencial doasing
system
Capacity of vessels 300 liters
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
MS Stand 1 no (To mount the
dosing system)
II STATIC MIXER FLOCCULATION TANK No 1169000.00 1169000.00
( S.M.F.T )
Design, fabrication, supply, erection, testing and
commissioning of Static Mixer Flocculation Tank
(SMFT) Circular shape made of Flocculator shaft and
blades of MOC SS-304 & Flocculation Tank made of MOC
-M.S as per IS-2062 and grade BR with a Retention time
of 20 Minits , with all accessories cost of all materials,
machinery, labour, cutting, aligning,anchoring, welding,
finishing, cleaning required accessories and installation
of S.M.F.T using the crain on the pre constructed platform
Etc., Complete with connecting the MS platform between
186
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
187
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
188
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
189
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
190
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
191
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
192
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
193
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
194
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
195
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
196
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
197
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
198
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.09 Water treatment plant for the flow rate of 1,10,000 LPH
(1.76 M.L.D) with 16 hour pumping
199
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
200
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
201
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
202
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
203
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
204
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
205
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
206
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
207
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
208
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
209
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
210
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
211
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
212
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
213
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
214
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
215
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
216
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
217
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
Define consistint
constration of brine
solution
Auto control of
contineous batch
process and hypo
drain
flow control Solenoid valves
Sensors Flot Level Sensors
Cleaning of electrode Reveres polarity
machanisum
15.12 Water treatment plant for the flow rate of 1,85,000 LPH
( 2.96 M.L.D ) with 16 hour pumping
Design parameter- Supply installation and commissioning
of the water treatment plant capable to treat the water
and make it potable at the flow rate of 185000 LPH with
suspended solids level less than 2000ppm, and PH value
and biological impurities beyond permissible limits of
potable water parameters.
I COAGULANT DOSING SYSTEM No 273000.00 273000.00
218
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
219
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
220
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
221
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
Head 20 m
Flow rate 1,85,000 lph
Stater and Panel Board 1 Set
ELCB, MCB 1 set
Pipesize for inlet and outlet 100 mm
MOC of Impeller Cast Iron
MOC of Delivery Casing Cast Iron
MOC of Motor body Cast Iron
MOC of Motor shaft Stainless Steel
VI FILTRATION No 1046500.00 1046500.00
Providing of Multi-grade Pressure Filter with required
accessories for connecting the filter to rising main with
a maximum / minimum operating pressure of 3.5 Kg/
cm2 to 2.0 Kg / cm2 respectively and confirming to the
following specifications: to filter water containing 50 ppm of
suspended solids to produce a filtrate with less than 5 ppm
of suspended solids.
a) The vertical cylindrical shell with dish ends made up of
mild steel confirming to IS 2062 fabricated of plate thickness
5 mm and dish end thickness 5 mm the inner surface of
M.S. Shell should be provided with epoxy paint , the raw
material confirming to FDA standards. Protective coat of
red oxide primer and enamel paint as per IS – 14209 for
outer surface of the M.S. Shell should be provided.
b) The following accessories should be provided with
the pressure filter:
i. One suitable set of laterals and header and bell mouth for
water distribution and collection system.
ii. One initial charge of , filter media and under bed material
with one set of suitable frontal pipe work and valves and
pressure gauges to monitor the pressure loss across the
filter operated manually as per the specifications below
c) The pressure filter unit is designed for the following
specification:
Working pressure 1.5 Kg / Cm2 to 3.5
Kg / cm2
Filter vessel dia 2800 mm
HOS 1875 mm
Frontal pipeline 200 mm
Valves Butterfly valves
222
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
Shell thickness 6 mm
Dish end thickness 8 mm
Filter media Silex Silica sand
Pressure relief valve 1 no 20 mm
Pressure gauge 2 nos 150 mm dial
MOC of vessel MS IS 2062 with
Epoxy food grade
inside
VII DISINFECTION No 471100.00 471100.00
F)Providing of Continuous type Disinfectant system
(Electro – Chlorinators / Chlorine Generators) with
required accessories for dosing the Sodium Hypochlorite
solution suitable to control feed rate and the Electro-
chlorinator and dosing system confirming to the following
specification. The system should generate the sodium
hypochlorite solution on site utilizing only food grade salt,
water and electric power and dose the produced sodium
hypochlorite solution at the rate of 2.0 - 1.8 ppm and as
per enclosed drawing.
b) The Electro-chlorinator is designed for the following
specification
Generator Capacity 300 grams / hour
(continuous)
Salt Consumed 1.5 Kg / hour
Hypochlorite 7 ~ 8.0 Gpl
Process tank 70 Ltrs (FRP)
NaOCl Produced Per hour 50-55 liters
Water that can be treated 185000 LPH
(approx.) with 2 ppm
dosing
Ractifier Full wave
Over load protection
Short circuit pritection
AC Power Consumed ……………….kw/
hour
MOC of process chamber FRP
Salt chamber FRP
Brine chamber FRP
223
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
224
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
Agitator
MOC of Flash mixer Vessel and FRP/Hdpe
Storage
Capacity of vessels 3000 liters
Diameter of mixing vessel 1475 mm
Height of mixing vessel 1987 mm
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
Coagulant dosing System
Type of dosing pump Mechanically
actuated diaphragm
type with drive motor
MOC of dosing pump head P.P.
MOC of diaphragm P.T.F.E.
MOC of gear housing for pump C.I. (powder coated)
MOC of pump and base M.S. powder coated
MS Stand 1 no (To mount the
dosing system)
Polymer dosing System
Type of dosing pump Differencial doasing
system
Capacity of vessels 500 liters
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
MS Stand 1 no (To mount the
dosing system)
II STATIC MIXER FLOCCULATION TANK (S.M.F.T) No 2089500.00 2089500.00
Design, fabrication, supply, erection, testing and
commissioning of Static Mixer Flocculation Tank
(SMFT) Circular shape made of Flocculator shaft and
blades of MOC SS-304 & Flocculation Tank made of MOC
-M.S as per IS-2062 and grade BR with a Retention time
of 20 Minits , with all accessories cost of all materials,
machinery, labour, cutting, aligning,anchoring, welding,
finishing, cleaning required accessories and installation of
S.M.F.T using the crain on the pre constructed platform Etc.,
Complete with connecting the MS platform between SMFT
tank and Lamella Clarifier and confirming to the following
specifications Painting Work: Surface preparation with
225
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
226
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
227
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
228
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
229
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
230
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.14 Water treatment plant for the flow rate of 2,25,000 LPH
( 3.60 M.L.D ) with 16 hour pumping
Design parameter- Supply installation and commissioning
of the water treatment plant capable to treat the water
and make it potable at the flow rate of 225000 LPH with
suspended solids level less than 2000ppm, and PH value
and biological impurities beyond permissible limits of
potable water parameters.
I COAGULANT DOSING SYSTEM No 290500.00 290500.00
Supply, Delivery, Installation and Commissioning of
Agitator & Coagulant Dosing System for 1.1 mld with
required accessories etc. complete for connecting to rising
main and including the cost of vessel, stirrer, storage tank
and dosing system and also the cost of lead, lift and labour
and maintenance of the equipments during the defect
liability period of 12 months and confirming to the following
specifications and as directed by Engineer - In- Charge:
Agitator
MOC of Flash mixer Vessel and FRP/Hdpe
Storage
Capacity of vessels 3000 liters
Diameter of mixing vessel 1475 mm
Height of mixing vessel 1987 mm
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
Coagulant dosing System
Type of dosing pump Mechanically
actuated diaphragm
type with drive motor
MOC of dosing pump head P.P.
MOC of diaphragm P.T.F.E.
MOC of gear housing for pump C.I. (powder coated)
MOC of pump and base M.S. powder coated
MS Stand 1 no (To mount the
dosing system)
Polymer dosing System
Type of dosing pump Differencial doasing
system
Capacity of vessels 1000 liters
231
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
232
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
233
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
234
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
235
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
236
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
Define consistint
constration of brine
solution
Auto control of
contineous batch
process and hypo
drain
flow control Solenoid valves
Sensors Flot Level Sensors
Cleaning of electrode Reveres polarity
machanisum
15.15 Water treatment plant for the flow rate of 2,50,000 LPH
(4.00 MLD ) with 16 hour pumping
Design parameter- Supply installation and commissioning
of the water treatment plant capable to treat the water
and make it potable at the flow rate of 250000 LPH with
suspended solids level less than 2000ppm, and PH value
and biological impurities beyond permissible limits of
potable water parameters.
I COAGULANT DOSING SYSTEM No 297500.00 297500.00
Supply, Delivery, Installation and Commissioning of
Agitator & Coagulant Dosing System for 1.1 mld with
required accessories etc. complete for connecting to rising
main and including the cost of vessel, stirrer, storage tank
and dosing system and also the cost of lead, lift and labour
and maintenance of the equipments during the defect
liability period of 12 months and confirming to the following
specifications and as directed by Engineer - In- Charge:
Agitator
MOC of Flash mixer Vessel and FRP/Hdpe
Storage
Capacity of vessels 3500 liters
Diameter of mixing vessel 1475 mm
Height of mixing vessel 1987 mm
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
Coagulant dosing System
Type of dosing pump Mechanically
actuated diaphragm
type with drive motor
237
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
238
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
239
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
240
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
241
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
242
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
243
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
244
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
245
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
246
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
247
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
248
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
249
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
250
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
251
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
252
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
253
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
254
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
255
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
256
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
257
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
258
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
for Out side one coat of red oxide primer and two coat of
Enamel paint. Etc., Complete as directed by the Engineer
in-Charge of work.
MOC of Lamella Clarifier Mild Steel (IS 2062)
with food grade epoxy
paint confirming IS
12643/1989.
Type of settling Inclined Plate type
MOC of inclined plates FRP
Lengeth of lamellaplates 2400 mm
Total no of lamellaplates 82 No
Sludge storage Hopper type with
sludge drain and
necessary valves
walkway for Operation and 4" C section with
meintenance chequgard plate of 4
mm thick Around the
lamella
Ladder with raling to reach 3" L section with
walkway on top of lamella Round tube for raling
IV CLARIFIED WATER STORAGE TANK Set of 1953000.00 1953000.00
Two
Unit
Providing, Supplying & Installation of Storage System
(Ground Level Storage Reservoir) using Prefabricated
Corrosion resistant Zincalume steel structures made
of as per IS- 15961 for intermediate balancing tank (filter
feed tank) and confirming to the following specifications:
Diameter of wall – 8300 mm and Height of wall (Excluding
Doom roof) to be 3030 mm. The Material of construction
of walls, liner and Doom roof to be Zincalume steel,
Heavy Duty PVC Food grade and Zincalume sheets in
knockdown form respectively to be assembled at site
as per the drawings. Heavy duty hot dipped galvanized
external ladder (1 no) to be provided along with heavy duty
hot dipped galvanized access hatch. The rate is inclusive
of the cost of installation of tank on sand bed with bold
down clamps & 4 nos of Nozzles made of Galvanized steel
to be provided for Inlet, Outlet, Drain and overflow.
MOC of Storage System Zincalume steel (IS
15961)
Diameter of tank 8300 mm
259
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
260
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
261
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
262
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
Auto control of
contineous batch
process and hypo
drain
flow control Solenoid valves
Sensors Flot Level Sensors
Cleaning of electrode Reveres polarity
machanisum
15.19 Water treatment plant for the flow rate of 3,75,000 LPH
(6.00 M.L.D ) with 16 hour pumping
Design parameter- Supply installation and commissioning
of the water treatment plant capable to treat the water
and make it potable at the flow rate of 375000 LPH with
suspended solids level less than 2000ppm, and PH value
and biological impurities beyond permissible limits of
potable water parameters.
I COAGULANT DOSING SYSTEM Set of 469000.00 469000.00
Two
Unit
Supply, Delivery, Installation and Commissioning of
Agitator & Coagulant Dosing System for 1.1 mld with
required accessories etc. complete for connecting to rising
main and including the cost of vessel, stirrer, storage tank
and dosing system and also the cost of lead, lift and labour
and maintenance of the equipments during the defect
liability period of 12 months and confirming to the following
specifications and as directed by Engineer - In- Charge:
Agitator
MOC of Flash mixer Vessel and FRP/Hdpe
Storage
Capacity of vessels 2500 liters
Diameter of mixing vessel 1475 mm
Height of mixing vessel 1692 mm
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
Coagulant dosing System
Type of dosing pump Mechanically
actuated diaphragm
type with drive motor
MOC of dosing pump head P.P.
MOC of diaphragm P.T.F.E.
263
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
265
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
266
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
Head 20 m
Flow rate 3,75,000 lph
Stater and Panel Board 1 Set
ELCB, MCB 1 set
Pipesize for inlet and outlet 125 MM & 150 MM
MOC of Impeller Cast Iron
MOC of Delivery Casing Cast Iron
MOC of Motor body Cast Iron
MOC of Motor shaft Stainless Steel
VI FILTRATION Set of 2093000.00 2093000.00
Two
Unit
Providing of Multi-grade Pressure Filter with required
accessories for connecting the filter to rising main with
a maximum / minimum operating pressure of 3.5 Kg/
cm2 to 2.0 Kg / cm2 respectively and confirming to the
following specifications: to filter water containing 50 ppm of
suspended solids to produce a filtrate with less than 5 ppm
of suspended solids.
a) The vertical cylindrical shell with dish ends made up of
mild steel confirming to IS 2062 fabricated of plate thickness
5 mm and dish end thickness 5 mm the inner surface of
M.S. Shell should be provided with epoxy paint , the raw
material confirming to FDA standards. Protective coat of
red oxide primer and enamel paint as per IS – 14209 for
outer surface of the M.S. Shell should be provided.
b) The following accessories should be provided with
the pressure filter:
i. One suitable set of laterals and header and bell mouth for
water distribution and collection system.
ii. One initial charge of , filter media and under bed material
with one set of suitable frontal pipe work and valves and
pressure gauges to monitor the pressure loss across the
filter operated manually as per the specifications below
c) The pressure filter unit is designed for the following
specification:
Working pressure 1.5 Kg / Cm2 to 3.5
Kg / cm2
Filter vessel dia 2800 mm
HOS 1875 mm
Frontal pipeline 200 mm
267
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
268
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
269
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
Agitator
MOC of Flash mixer Vessel and FRP/Hdpe
Storage
Capacity of vessels 3000 liters
Diameter of mixing vessel 1475 mm
Height of mixing vessel 1987 mm
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
Coagulant dosing System
Type of dosing pump Mechanically
actuated diaphragm
type with drive motor
MOC of dosing pump head P.P.
MOC of diaphragm P.T.F.E.
MOC of gear housing for pump C.I. (powder coated)
MOC of pump and base M.S. powder coated
MS Stand 1 no (To mount the
dosing system)
Polymer dosing System
Type of dosing pump Differencial doasing
system
Capacity of vessels 1000 liters
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
MS Stand 1 no (To mount the
dosing system)
II STATIC MIXER FLOCCULATION TANK ( S.M.F.T ) Set of 4179000.00 4179000.00
Two
Unit
Design, fabrication, supply, erection, testing and
commissioning of Static Mixer Flocculation Tank
(SMFT) Circular shape made of Flocculator shaft and
blades of MOC SS-304 & Flocculation Tank made of MOC
-M.S as per IS-2062 and grade BR with a Retention time
of 20 Minits , with all accessories cost of all materials,
machinery, labour, cutting, aligning,anchoring, welding,
finishing, cleaning required accessories and installation
of S.M.F.T using the crain on the pre constructed platform
Etc., Complete with connecting the MS platform between
270
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
271
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
272
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
273
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
274
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
275
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.21 Water treatment plant for the flow rate of 4,25,000 LPH
( 6.80 M.L.D ) with 16 hour pumping
Design parameter-Supply installation and commissioning
of the water treatment plant capable to treat the water
and make it potable at the flow rate of 425000 LPH with
suspended solids level less than 2000ppm, and PH value
and biological impurities beyond permissible limits of
potable water parameters.
I COAGULANT DOSING SYSTEM Set of 581000.00 581000.00
Two Unit
Supply, Delivery, Installation and Commissioning of
Agitator & Coagulant Dosing System for 1.1 mld with
required accessories etc. complete for connecting to rising
main and including the cost of vessel, stirrer, storage tank
and dosing system and also the cost of lead, lift and labour
and maintenance of the equipments during the defect
liability period of 12 months and confirming to the following
specifications and as directed by Engineer - In- Charge:
Agitator
MOC of Flash mixer Vessel and FRP/Hdpe
Storage
Capacity of vessels 3000 liters
Diameter of mixing vessel 1475 mm
Height of mixing vessel 1987 mm
Stirrer with motor 1 No
MOC of stitter and shaft SS 304
Coagulant dosing System
Type of dosing pump Mechanically
actuated diaphragm
type with drive motor
MOC of dosing pump head P.P.
MOC of diaphragm P.T.F.E.
MOC of gear housing for pump C.I. (powder coated)
MOC of pump and base M.S. powder coated
MS Stand 1 no (To mount the
dosing system)
Polymer dosing System
Type of dosing pump Differencial doasing
system
276
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
277
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
278
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
279
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
280
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
281
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
282
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
283
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
284
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
285
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
V Providing, Supplying & Installation of Three Phase MONO Set of 1514800.00 1514800.00
submersible pump set (1+1 ) of approved make as Two Unit
filter feed pump with required accessories etc. complete:
fuses and fuse box, starter and panel board, ELCB, MCB,
electrical cables from board to motor, piping for suction
and delivery and for connection to the filter unit and rubber
sheet support for pump and confirming to the following
specifications:
Head 20 m
Flow rate 4,50,000 lph
Stater and Panel Board 1 Set
ELCB, MCB 1 set
Pipesize for inlet and outlet 150 MM & 200 MM
MOC of Impeller Cast Iron
MOC of Delivery Casing Cast Iron
MOC of Motor body Cast Iron
MOC of Motor shaft Stainless Steel
VI FILTRATION Set of 2576000.00 2576000.00
Two Unit
Providing of Multi-grade Pressure Filter with required
accessories for connecting the filter to rising main with
a maximum / minimum operating pressure of 3.5 Kg/
cm2 to 2.0 Kg / cm2 respectively and confirming to the
following specifications: to filter water containing 50 ppm of
suspended solids to produce a filtrate with less than 5 ppm
of suspended solids.
a) The vertical cylindrical shell with dish ends made up of
mild steel confirming to IS 2062 fabricated of plate thickness
5 mm and dish end thickness 5 mm the inner surface of
M.S. Shell should be provided with epoxy paint , the raw
material confirming to FDA standards. Protective coat of
red oxide primer and enamel paint as per IS – 14209 for
outer surface of the M.S. Shell should be provided.
b) The following accessories should be provided with
the pressure filter:
i. One suitable set of laterals and header and bell mouth for
water distribution and collection system.
ii. One initial charge of , filter media and under bed material
with one set of suitable frontal pipe work and valves and
pressure gauges to monitor the pressure loss across the
filter operated manually as per the specifications below
286
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
287
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
288
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
289
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
290
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
291
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
293
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
294
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
295
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.28 Automatic Online Hydraulically Operated Self Cleaning 2 Nos 474500.00 474500.00
Multi grade Pressure Filter for the flow rate of 20000
LPH (0.32 M.L.D ) with 16 hour pumping
FILTRATION
Providing of Multi-grade Pressure Filter (2 Nos) with
required accessories for connecting the filter to rising main
with a maximum / minimum operating pressure of 3.5 Kg/
cm2 to 2.0 Kg / cm2 respectively and confirming to the
following specifications: to filter water containing 50 ppm of
suspended solids to produce a filtrate with less than 5 ppm
of suspended solids.
a) The vertical cylindrical shell with dish ends made up of
mild steel confirming to IS 2062 fabricated of plate thickness
6 mm and dish end thickness 8 mm the inner surface of
M.S. Shell should be provided with epoxy paint , the raw
material confirming to FDA standards. Protective coat of
red oxide primer and enamel paint as per IS – 14209 for
outer surface of the M.S. Shell should be provided.
b) The following accessories should be provided with
the pressure filter:
i. One suitable set of laterals and header and bell mouth for
water distribution and collection system.
ii. One initial charge of , filter media and under bed material
with one set of suitable frontal pipe work and valves and
pressure gauges to monitor the pressure loss across the
filter operated manually as per the specifications below
c) The pressure filter unit is designed for the following
specification:
Working pressure 1.5 Kg / Cm2 to 3.5
Kg / cm2
Filter vessel dia (Zeosorb) 1200 mm
HOS 1500 mm
Filter vessel dia (Anthracite/ 1200 mm
Carbon)
HOS 1800 mm
Frontal pipeline 75 mm
Valves Butterfly valves
Shell thickness 6 mm
Dish end thickness 8 mm
TCL Dosing Pump 1 nos
Pressure relief valve 1 no
296
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
297
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
Frontal pipeline 75 mm
Valves Butterfly valves
Shell thickness 6 mm
Dish end thickness 8 mm
TCL Dosing Pump 1 nos
Pressure relief valve 1 no
Pressure gauge 2 nos
MOC of vessel MS IS 2062 with
Epoxy food grade
inside
a Filter Media as Silica Sand 2178 Kg 287000.00 287000.00
b Filter Media as Zeosorb 454 ltr 340900.00 340900.00
c Filter Media as Anthracite 800 Kg 343350.00 343350.00
15.30 Automatic Online Hydraulically Operated Self Cleaning 2 Nos 638100.00 638100.00
Multi grade Pressure Filter for the flow rate of 45000
LPH ( 0.72 M.L.D ) with 16 hour pumping
FILTRATION
Providing of Multi-grade Pressure Filter (2 Nos) with
required accessories for connecting the filter to rising main
with a maximum / minimum operating pressure of 3.5 Kg/
cm2 to 2.0 Kg / cm2 respectively and confirming to the
following specifications: to filter water containing 50 ppm of
suspended solids to produce a filtrate with less than 5 ppm
of suspended solids.
a) The vertical cylindrical shell with dish ends made up of
mild steel confirming to IS 2062 fabricated of plate thickness
6 mm and dish end thickness8 mm the inner surface of
M.S. Shell should be provided with epoxy paint , the raw
material confirming to FDA standards. Protective coat of
red oxide primer and enamel paint as per IS – 14209 for
outer surface of the M.S. Shell should be provided.
b) The following accessories should be provided with
the pressure filter:
i. One suitable set of laterals and header and bell mouth for
water distribution and collection system.
ii. One initial charge of , filter media and under bed material
with one set of suitable frontal pipe work and valves and
pressure gauges to monitor the pressure loss across the
filter operated manually as per the specifications below
298
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
299
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
300
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
301
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
302
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
303
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
304
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
305
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
306
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
307
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
308
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
309
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
310
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
311
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.42 Supply and delivery at site special moulded variety 25 mm No. 15.00 15.00
dia PVC couplers as per IS 7834/ 1987 and fabricated
as per IG124/ 1984 with ISI mark and with its latest
amendments
15.42.1 32 mm dia No. 18.00 18.00
15.42.2 40 mm dia No. 25.00 25.00
15.42.3 50 mm dia No. 35.00 35.00
15.42.4 63 mm dia No. 40.00 40.00
15.42.5 75 mm dia No. 50.00 50.00
15.42.6 90 mm dia No. 60.00 60.00
15.42.7 110 mm dia No. 90.00 90.00
15.42.8 140 mm dia No. 118.00 118.00
15.42.9 160 mm dia No. 140.00 140.00
15.42.10 180 mm dia No. 170.00 170.00
15.42.11 200 mm dia No. 200.00 200.00
15.42.12 225 mm dia No. 235.00 235.00
15.42.13 250 mm dia No. 309.00 309.00
15.42.14 280 mm dia No. 380.00 380.00
15.42.15 315 mm dia No. 425.00 425.00
PVC ELBOWS
15.43 Supply and delivery at site special moulded variety No. 35.00 35.00
25 mm dia PVC elbows as per IS 7834/ 1987 and
fabricated as per IG124/ 1984 with ISI mark with its
latest amendments
15.43.1 32 mm dia No. 45.00 45.00
15.43.2 40 mm dia No. 55.00 55.00
15.43.3 50 mm dia No. 70.00 70.00
15.43.4 63 mm dia No. 90.00 90.00
15.43.5 75 mm dia No. 108.00 108.00
15.43.6 90 mm dia No. 115.00 115.00
15.43.7 110 mm dia No. 130.00 130.00
15.43.8 140 mm dia No. 195.00 195.00
15.43.9 160 mm dia No. 270.00 270.00
15.43.10 180 mm dia No. 370.00 370.00
15.43.11 200 mm dia No. 400.00 400.00
312
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
313
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
314
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
315
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
316
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.53 Providing 80 mm dia medium class CI plugs confirming No. 120.00 120.00
to IS 1538 (Part-I to XXII) 1978 with latest amendments if
any cost of all materials, labour charges etc. complete.
15.53.1 100 mm dia No. 160.00 160.00
15.53.2 125 mm dia No. 250.00 250.00
15.53.3 150 mm dia No. 420.00 420.00
15.53.4 200 mm dia No. 790.00 790.00
15.53.5 250 mm dia No. 800.00 800.00
15.53.6 300 mm dia No. 1000.00 1000.00
15.54 Providing 80 mm dia heavy class CI plugs confirming No. 140.00 140.00
to IS 1538 (Part-I to XXII) 1978 with latest amendments if
any cost of all materials, labour charges etc. complete.
15.54.1 100 mm dia No. 200.00 200.00
15.54.2 125 mm dia No. 300.00 300.00
15.54.3 150 mm dia No. 475.00 475.00
15.54.4 200 mm dia No. 602.00 602.00
15.54.5 250 mm dia No. 700.00 700.00
15.54.6 300 mm dia No. 900.00 900.00
15.55 Providing 80 mm dia CI bank flange confirming to IS No. 200.00 200.00
1538 (Part-I to XXII) 1978 with latest amendments if any
cost of all materials, labour charges etc. complete.
15.55.1 100 mm dia No. 250.00 250.00
15.55.2 125 mm dia No. 300.00 300.00
15.55.3 150 mm dia No. 350.00 350.00
15.55.4 200 mm dia No. 500.00 500.00
15.55.5 250 mm dia No. 550.00 550.00
15.55.6 300 mm dia No. 735.00 735.00
15.56 Providing 80 mm dia CI caps confirming to IS 1538 No. 200.00 200.00
(Part-I to XXII) 1978 with latest amendments if any cost
of all materials, labour charges etc. complete.
15.56.1 100 mm dia No. 250.00 250.00
15.56.2 125 mm dia No. 350.00 350.00
15.56.3 150 mm dia No. 500.00 500.00
15.56.4 200 mm dia No. 600.00 600.00
15.56.5 250 mm dia No. 718.00 718.00
15.56.6 300 mm dia No. 865.00 865.00
317
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.57 Providing 80 mm dia Bell mouthed pipes (flanged) No. 320.00 320.00
confirming to IS 1538 (Part-I to XXII) 1978 with latest
amendments if any cost of all materials, labour charges
etc. complete.
15.57.1 100 mm dia No. 420.00 420.00
15.57.2 125 mm dia No. 500.00 500.00
15.57.3 150 mm dia No. 650.00 650.00
15.57.4 200 mm dia No. 850.00 850.00
15.57.5 250 mm dia No. 1149.00 1149.00
15.57.6 300 mm dia No. 1400.00 1400.00
15.58 Providing 80 mm dia Duck foot bend confirming to IS No. 350.00 350.00
1538 (Part-I to XXII) 1978 with latest amendments if any
cost of all materials, labour charges etc. complete.
15.58.1 100 mm dia No. 420.00 420.00
15.58.2 125 mm dia No. 590.00 590.00
15.58.3 150 mm dia No. 800.00 800.00
15.58.4 200 mm dia No. 900.00 900.00
15.58.5 250 mm dia No. 1000.00 1000.00
15.58.6 300 mm dia No. 1200.00 1200.00
15.59 Providing 80 mm dia Sluice valve/ scour valve No. 2900.00 2900.00
confirming to IS 1538 (Part-I to XXII) 1978 with latest
amendments if any cost of all materials, labour charges
etc. complete.
15.59.1 100 mm dia No. 3800.00 3800.00
15.59.2 125 mm dia No. 4200.00 4200.00
15.59.3 150 mm dia No. 4900.00 4900.00
15.59.4 200 mm dia No. 5500.00 5500.00
15.59.5 250 mm dia No. 6000.00 6000.00
15.59.6 300 mm dia No. 6500.00 6500.00
15.60 Providing 80 mm dia Air valve confirming to IS 1538 No. 2700.00 2700.00
(Part-I to XXII) 1978 with latest amendments if any
15.60.1 100 mm dia No. 3000.00 3000.00
15.60.2 125 mm dia No. 3578.00 3578.00
15.60.3 150 mm dia No. 3915.00 3915.00
15.60.4 200 mm dia No. 4500.00 4500.00
15.60.5 250 mm dia No. 5000.00 5000.00
318
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
319
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
320
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.68 Providing 80 mm dia Heavy class 45” double flanged No. 785.00 785.00
socketed bend confirming to IS 1538 (Part-I to XXII)
1978 with latest amendments if any cost of all materials,
labour charges etc. complete.
15.68.1 100 mm dia No. 900.00 900.00
15.68.2 125 mm dia No. 1300.00 1300.00
15.68.3 150 mm dia No. 1600.00 1600.00
15.68.4 200 mm dia No. 1900.00 1900.00
15.68.5 250 mm dia No. 2789.00 2789.00
15.68.6 300 mm dia No. 3500.00 3500.00
15.69 Providing 80 mm dia Medium class 22½” double No. 580.00 580.00
socketed bend confirming to IS 1538 (Part-I to XXII)
1978 with latest amendments if any cost of all materials,
labour charges etc. complete.
15.69.1 100 mm dia No. 690.00 690.00
15.69.2 125 mm dia No. 800.00 800.00
15.69.3 150 mm dia No. 1000.00 1000.00
15.69.4 200 mm dia No. 1400.00 1400.00
15.69.5 250 mm dia No. 2000.00 2000.00
15.69.6 300 mm dia No. 2718.00 2718.00
15.70 Providing 80 mm dia Heavy class 22½” double socketed No. 675.00 675.00
bend confirming to IS 1538 (Part-I to XXII) 1978 with
latest amendments if any cost of all materials, labour
charges etc. complete.
15.70.1 100 mm dia No. 900.00 900.00
15.70.2 125 mm dia No. 1000.00 1000.00
15.70.3 150 mm dia No. 1400.00 1400.00
15.70.4 200 mm dia No. 1800.00 1800.00
15.70.5 250 mm dia No. 2500.00 2500.00
15.70.6 300 mm dia No. 3267.00 3267.00
15.71 Providing 80 mm dia Medium class 14¼” double No. 700.00 700.00
socketed bend confirming to IS 1538 (Part-I to XXII)
1978 with latest amendments if any cost of all materials,
labour charges etc. complete.
15.71.1 100 mm dia No. 1000.00 1000.00
15.71.2 125 mm dia No. 1300.00 1300.00
15.71.3 150 mm dia No. 1700.00 1700.00
321
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
322
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
323
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.77 Supply and delivery at site wrought middle steel Each 35.00 35.00
(galvanized) 15 mm dia GI plugs confirming to IS 1239-
II, 1991 with latest amendments if any.
15.77.1 20 mm Dia Each 45.00 45.00
15.77.2 25 mm Dia Each 65.00 65.00
15.77.3 32 mm Dia Each 85.00 85.00
15.77.4 40 mm dia Each 115.00 115.00
15.77.5 50 mm dia Each 130.00 130.00
15.77.6 65 mm dia Each 155.00 155.00
15.77.7 80 mm dia Each 175.00 175.00
15.77.8 100 mm dia Each 245.00 245.00
15.77.9 125 mm dia Each 295.00 295.00
15.77.10 150 mm dia Each 335.00 335.00
15.78 Supply and delivery at site wrought middle steel Each 55.00 55.00
(galvanized) 15 mm dia GI union confirming to IS 1239-
II, 1991 with latest amendments if any.
15.78.1 20 mm Dia Each 85.00 85.00
15.78.2 25 mm Dia Each 105.00 105.00
15.78.3 32 mm Dia Each 125.00 125.00
15.78.4 40 mm dia Each 155.00 155.00
15.78.5 50 mm dia Each 175.00 175.00
15.78.6 65 mm dia Each 230.00 230.00
15.78.7 80 mm dia Each 395.00 395.00
15.78.8 100 mm dia Each 425.00 425.00
15.78.9 125 mm dia Each 455.00 455.00
15.78.10 150 mm dia Each 535.00 535.00
15.79 Supply and delivery at site wrought middle steel Each 45.00 45.00
(galvanized) 15 mm dia GI back nut/ check nut
confirming to IS 1239-II, 1991 with latest amendments
if any.
15.79.1 20 mm Dia Each 65.00 65.00
15.79.2 25 mm Dia Each 95.00 95.00
15.79.3 32 mm Dia Each 115.00 115.00
15.79.4 40 mm dia Each 135.00 135.00
15.79.5 50 mm dia Each 175.00 175.00
324
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
325
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.82 Providing 15 mm dia GM (copper alloy) reflex valves/ Each 325.00 325.00
globe valves confirming to Class-I and as per IS
778/1990 with latest amendments, 1 No. and with ISI
mark screwed female ends confirming to IS 554/ 1990
horizontal body hydraulically tested for 1.50 HP and
seat hydraulically tested 1 HP.
15.82.1 20 mm Dia Each 385.00 385.00
15.82.2 25 mm Dia Each 430.00 430.00
15.82.3 32 mm Dia Each 485.00 485.00
15.82.4 40 mm dia Each 575.00 575.00
15.82.5 50 mm dia Each 635.00 635.00
15.82.6 65 mm dia Each 685.00 685.00
15.82.7 80 mm dia Each 745.00 745.00
15.82.8 100 mm dia Each 865.00 865.00
15.82.9 125 mm dia Each 935.00 935.00
15.82.10 150 mm dia Each 1075.00 1075.00
15.83 Providing 15 mm dia GM (copper alloy) wheel valves/ Each 455.00 455.00
check valve confirming to IS 778/1990 Class-I with
latest amendments No. 1 and with ISI mark screwed
in bonnet integral seat inside, screw, rising spindle
screwed female ends confirming to IS 554/ 1990 body
hudraulically tested 1.50 HP seat hydraulically tested
1.00 HP.
15.83.1 20 mm Dia Each 550.00 550.00
15.83.2 25 mm Dia Each 725.00 725.00
15.83.3 32 mm Dia Each 830.00 830.00
15.83.4 40 mm dia Each 910.00 910.00
15.83.5 50 mm dia Each 1025.00 1025.00
15.83.6 65 mm dia Each 1150.00 1150.00
15.83.7 80 mm dia Each 1285.00 1285.00
15.83.8 100 mm dia Each 1415.00 1415.00
15.83.9 125 mm dia Each 1545.00 1545.00
15.83.10 150 mm dia Each 1680.00 1680.00
15.84 Providing 15 mm dia GM ferrules as per IS 2692 and Each 240.00 240.00
with ISI mark rouby body hydraulically tested 2.00 HP
of size 8 mm to 50 mm.
15.84.1 20 mm dia Each 345.00 345.00
15.84.2 25 mm dia Each 390.00 390.00
326
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.84.3 Providing 15 mm dia GM gland cocks tested against Each 235.00 235.00
hydraulic pressure of 20 Kg/m² with ISI mark.
15.84.4 20 mm Dia Each 335.00 335.00
15.84.5 25 mm Dia Each 410.00 410.00
15.84.6 32 mm Dia Each 475.00 475.00
15.84.7 40 mm dia Each 575.00 575.00
15.84.8 50 mm dia Each 630.00 630.00
15.85 Supply of ISI Mark nominal bore, plain end steel casing Rmt 1325.00 1325.00
pipe-grade of steel Fe 410 of wall thickness conforming to
IS 4270-2001 and latest amendments, electrical resistance
welded steel tube material and conforming to IS 1387-
1993 and manufactured by basic open hearth electric or
basic oxygen process in random length of 5 to 7m. Both
ends threaded conforming to IS 554-1985, one end fixed
with socket conforming to IS 4270-2001 and the other end
with screwed pipes. All pipes shall be resonably free from
defects. The tubes shall be resonably straight and should
be with ISI marking weighing 25.10kg/m. (exclusive of all
taxes and duties). Prices include Collar-Medium duty
175mm dia x 5.4mm thick - Rs.1325.00
15.86 Providing and fixing MS casing collars as per IS 1239 Each 150.00 150.00
(part-II) 1982 with all latest amendments if any for any dia.
The thickness of plate used for covering one end shall be
3mm (minimum). The dimensions of caps and colars shall
be strictly as per IS 1239 (Part-II) 1982 with all amendments
15.87 Providing and laying at site of work MS casing caps as Each 100.00 100.00
per IS 1239 (part-II) 1982 with all latest amendments if any
for any dia. The thickness of plate used for covering one
end shall be 3mm (minimum). The dimensions of caps and
colars shall be strictly as per IS 1239 (Part-II) 1982 with all
amendments including cost of material and labour charges
for fixing, if any etc. complete with all lead and lifts and as
directed by the Engineer in charge
15.88 Supplying of lead Kg. 350.00 350.00
15.89 Supply of hemp yarn Kg. 325.00 325.00
15.90 Supply of solvent cement Ltr 425.00 425.00
15.91 Supply of bolt and nut with Kg 75.42 75.42
washers
15.92 Supply of rubber insertion sheet Kg 95.00 95.00
(3 mm)
15.93 Supply of AC cowl No. 175.00 175.00
327
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
329
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
cost of all materials, labour, lead and lifts and as per the
directions of the Engineer-in-charge of work including two
coats of approved quality paint over one coat of shop paint
15.98 Providing and fixing M.S. Block pipe of 38mm dia, of heavy m 408.00 408.00
guage of 14 including removing the bends, cutting the pipe,
and fixing pipe in between the existing two verticle poles
(M.S. rectangular poles) and spot welding the chain link
with M.S. block pipe including cost of all materials wastage
in cutting, and scaffolding wherever necessary with all lead
and lift as directed by the Engineer-in-charge of work etc.,
complete including two coats of approved quality paint
over one coat of shop paint.
15.99 Provoding Barbed GI wire fencing of 12x12 guage drawn m 32.00 32.00
into stone pillers or iron pillers including drawing in holes
wherever necessary excluding the cost of pillers but
including the cost of barbed wire and binding wire etc,.
including cost of materials,labour,HOM complete as per
specifications
15.100 Providing and fixing RCC precast fencing pole of size each 1791.00 1791.00
0.15m x 0.15m x2.0m casted in CC 1:1.5:3 with 20mm
downsize aggregate making holes for drawing barbed wire
at 30cm c/c using 10 mm dia vertical 4 TMT steel rods
and 8mm dia stirrups at 15cm c/c fixed 1.5m above ground
level using steel moulding, curing, transportation to work
spot including excavation in hard soil fixing in plain cement
concrete 1:2:4 using 20mm downsize aggregate including
aligning to plumb and line providing including cost of all
materials, labour, hire charge of machineries lead, lift
loading & unloading etc.,Complete.
15.101 Providing two bulb underreemed pile foundation upto m 912.00 912.00
maximum 5m depth including hire charges of machineries
digging the pile holes, labour charges and laying 20mm and
down size jelly RCC M 20 keeping the reinforcement edge
cutting etc., complete as per specifications. - - 23 cm dia
15.102 Providing two bulb underreemed pile foundation upto m 1489.00 1489.00
maximum 5m depth including hire charges of machineries
digging the pile holes, labour charges and laying 20mm and
down size jelly RCC M 20 keeping the reinforcement edge
cutting etc., complete as per specifications. - - 30 cm dia
15.103 Painting two coats on new concrete surface :Painting two Sqm 82.00 82.00
coats after filling the surface with synthetic enamel paint
in all shades on new plastered concrete surfaces, with
materials, labour complete as per specifications. MORTH
Specification No 803
330
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.104 Painting New Letter and Figures of any Shade with cm 1.00 1.00
synthetic enamel paint black or any other approved colour
to give an even shade complete as per specifications. (“i)
Hindi ( Matras commas and the like not to be measured
and paid for half letter shall be counted as half) “ MORTH
Specification No. 803
15.105 Painting new letter and figures of any shade with synthetic cm 0.70 0.70
enamel paint black or any other approved colour to give
an even shade complete as per specifications. (“ii) English
and Roman - Hyphen and the like not to be measured and
paid for “ MORTH Specification No.801
15.106 Supply and Fixing of Cast Steel Double Flanged Dual
plate check valve Class 150 Conforming to API 594
with latest amendments as detailed below of following
diameters and types and conveying to work site, loading,
unloading, stacking etc., complete with all lead and lift. The
rates are inclusive of cost of Bolts and Nuts.
15.106.1 Class 150
a) 80mm Each 4153.00 4153.00
b) 100mm Each 4787.00 4787.00
c) 150mm Each 8224.00 8224.00
d) 200mm Each 15548.00 15548.00
e) 250mm Each 22436.00 22436.00
f) 300mm Each 29423.00 29423.00
g) 350mm Each 39853.00 39853.00
h) 400mm Each 56462.00 56462.00
i) 450mm Each 67749.00 67749.00
j) 500mm Each 78070.00 78070.00
k) 600mm Each 88087.00 88087.00
l) 700mm Each 124622.00 124622.00
m) 750mm Each 137960.00 137960.00
n) 800mm Each 153042.00 153042.00
o) 900mm Each 212153.00 212153.00
p) 1000mm Each 272062.00 272062.00
q) 1100mm Each 810101.00 810101.00
r) 1200mm Each 1045791.00 1045791.00
15.106.2 Class 300
a) 80mm Each 4544.00 4544.00
331
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
332
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
333
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
15.108.1 PN-10
a) 50mm Each 16364.00 16364.00
b) 80mm Each 22996.00 22996.00
c) 100mm Each 30672.00 30672.00
d) 150mm Each 36287.00 36287.00
e) 200mm Each 46534.00 46534.00
15.108.2 PN-16
a) 50mm Each 17989.00 17989.00
b) 80mm Each 25162.00 25162.00
c) 100mm Each 37994.00 37994.00
d) 150mm Each 45855.00 45855.00
e) 200mm Each 53555.00 53555.00
15.108.3 PN-25
a) 50mm Each 21454.00 21454.00
b) 80mm Each 30142.00 30142.00
c) 100mm Each 37994.00 37994.00
d) 150mm Each 45855.00 45855.00
e) 200mm Each 53555.00 53555.00
15.109 Supply and fixing of DI double flanged water type
(Concentric) / double eccentrically disc, butterfly valves
conforming to DIN 335 / IS 13095 with renewable soft seal
on the disc and body seat face of nickel weld overlay micro
finished / Integral Seat with power or liquid epoxy coating
with minimum thickness of 250 microns applied on both
body and disc inside and outside. Face to face dimensions
as per EN 558-1 basic series 14 (DN 3203 F4) or AWWA
C 504 : 80 or BS 5155 or IS 13095. The valves shall be
supplied along with the required number of standard make
galvanized Bolts and nuts. The flange drilling standard is
IS 1538. Hence, drilling of hole in the valves shall match
with the pipe flange drilling standrad. The valves are to be
suitable for buried operation with the gear box sealed and
lubricated for life time operation.
15.109.1 DI Double Flanged Wafer Type Butterfly valve PN-10
a) 50mm Each 8654.00 8654.00
b) 80mm Each 9569.00 9569.00
c) 100mm Each 12013.00 12013.00
d) 150mm Each 14455.00 14455.00
334
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
335
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
336
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
337
Zone-A Zone-B
Sl. No. Specifications Unit Rs. Ps. Rs. Ps.
Rate (Excluding G.S.T)
338
Annexure-A
25LPH WATER PURIFICATION PLANTS - SPARE PARTS
339
Annexure-B
50 LPH WATER PURIFICATION PLANTS - SPARE PARTS
340
ANNEXURE-B/1
Water purification plants : Supplying, Installation and Commissioning of fully automatic Water purification
plant (RO+UV+UF)with all accessories piping, product water tank on single phase power supply on Turnkey/
EPC Basis as per the enclosed detailed Technical Specifications including cost of material applicable taxes
and duties loading and unloading,
UPTO 100 LPH
Descrption Specification Quantity Make
A Materials
1 Raw Water Pump N/A N/A
2 Micron Catridge Filter Micron cartridge filter for removing 2 neopure/nzo/
Suspended particles >10 &5 micron. Should Equivalent
have capacity of 100 litres /hour . material
of Catridge should be polypropylene having
length of 10” X 2.5" dia.
3 Sand Filter 0.15mtr dia X 0.25 mtrs 1
4 Carbon Filter N/A N/A
5 Anti Scalant Dosing Transparent glassy balls of size 16.5mm to 8 Elixer/saitech/
System & Chemicals 17.5mm dia,weight approximately 9 to 11gm pentapure/equvalent
and should have the PH of 6.5 to 7.5
6 High Pressure Pump Pump Side 1 Calpeda/flowjet/
IE2 rating.. grundfos/E-chain/
Design Flow :0.096-0.144 m3/hr cosmos
Design Head :3mtr
Rated Motor :24VDC,5A,120W
341
12 SS Cabin Fully enclosed stainless steel 304 grade 1 Elixer/saitech/
Cabinet with 4 no's mounting wheels(63mm pentapure/ORG/
dia) of lenth 1100mm X width 530mm X equvalent
height 1940mm.ground clearences should
be minimum 100mm,purification system
should be visible for easy maintenance.5
no's of half inch size SS taps for drinking
purpose.Fully water proof Stickers and
branding as per government official
guidance.Tray for bottle dispense of suitable
size of SS Make.
13 Storage Tank 200 Litres inbuilt Stainless Storage Tank 1 set Aqua / Elixir / Nova /
with 1/2" SS taps 5 nos should be provided. Eqvi
For Low and high level flow control ,
commericial float switch should be provided.
14 Multiport Valve N/A N/A
15 Control Panel with N/A N/A
Data Transfer to
Server
16 Instruementation Low Pressure Switch(24v) for raw water 1set Danfose/Uflow/org-
items protections at inlet should be provided.3/8" cherry/EAC/Equivalent
Solenyed Valve of range (with Brass made
0-10bar) 24 volt DC should be provided for
high pressure pump for low pressure cutoff /
Stainless steel float switch with suitable cable
for proper operation of the system. smps 5a,
Function-to measure pressurePump outlet,
Filter outlet, Pressure pump
• 3/8" 24 volt DC PVC Auto flush system
with solenoid valve
• Pressure controler valve
• 1/4"-3/8" TDS controler
fFor backup the instrumentation 230V as
input and 24v DC,5A output switch mode
power supply unit should be provided.
.
342
20 UV set 11 w UV tube with stainless steel housing 1 set Alfa/ Phillips/ ACE
size 8" long with inlet outlet dia 1/4" to 3/8" Hygiene or equivalent
Function-to disinfect water, will kill bacteria
and
micro-organisms upto 99.9%
343
Annexure-C
125 LPH WATER PURIFICATION PLANTS - SPARE PARTS
Specifications for 125 LPH RO Plant
Sl
Description Qty
No
1 RO membrane – 1
For Capacity of 1000 litres / hour Sprial wound TFC Polyamide suitable size Dia 4” x 40”
long . No of membrane Shall have 4 numbers and the No of membrane housing shall be
2. Skid of construction should be Mild steel power coated.
2 For RO Plant Raw Water Pump 1
a.Pump Side
Horizontal multi-stage Self priming Close Coupled pumps, having Single-piece barrel
casing, with front suction port abovepumps axis and radial delivery at top. Pump Casing
& Casing Cover , Spacer Sleeve Should be in Cr.Ni Steel AISI 304. Shaft Should be
Cr.Ni Steel AISI 303. Mechanical seal suitable for RO Application.Suction lift upto9mtrs
b. Motor Side
2 polemotor with Standard voltage for Single phase 230V with Voltage variation +10%
/ - 10%. Insulation class F & Protection – IP54. Classification Scheme of minimum IE2
rating. Motor inbuilt thermal protector is mandatory.
Pump Model :NGXM 2
Design Flow :0.5 m3/hr
Design Head :10mtr
Rated Motor :0.15 kW / 0.2 HP
3 For RO Plant High pressure Water Pump 1
b.Pump Side
Vertical multi-stage pumps with suction and delivery connections of the same diameter
and arranged along the same axis (in-line). Corrosion-resistant bearing sleeves lubricated
by the pumped liquid.A pump with thrust bearing and sleeve coupling for use of any
standard motor with IM V1 construction.Pump Casing , impeller, stage casing & Casing
Cover , Spacer Sleeve Should be in Cr.Ni Steel AISI 304. Shaft Should be Cr.Ni Steel
AISI 303. Mechanical seal suitable for RO ApplicationRecommended WRAS certified
Pump.
b. Motor Side
2 polemotor with Standard voltage for three phase 400V with Voltage variation +5%
/ - 5%. Insulation class F & Protection – IP54. Classification Scheme of minimum IE2
rating..
Pump Model : MXV 25-212
Design Flow :1.0 m3/hr
Design Head :100mtr
Rated Motor :1.5 kW / 2.0 HP
344
4 Control Panel 1
Panel Dimension Shouldbe minimum 450mm (W) x 250 (H) mm x 450 (D) mm. Sheet
thickness should be 1.6 & 2mm finished with powered coated RAL 7035. It has to
operate with both Auto / manual . Float switch for raw water tank has to be connected
in this to avoid dry run. Analog Voltmeter and Ammeter should be there for metering.
Electrical protection like Phase Reverse, UV, OV, Phase Fail, Neutral Fail, Asymmetry,
Over Current (OLR)are mandatory. Phase indication lamp for R,Y,B , PUMP ON/OFF,
Pump trip, Supply Unhealthy, Float Switch fault. Raw water Pump &High pressure Pump
Control Should be inside this panel.
5 Micron Filter
Micron cartridge filter for removing Suspended particles >5 micron. Should have capacity
of 1000 litres /hour . material of Catridge should be polypropylene having length of 20”.
6 Skid 1
Stainless steel Skid rectangular type for capacity of 125 LPH – 1no with above mentioned
items mounted on it.
Instrumentation
Flow indicators of 2 numbers – float type panel mounted 1 no on RO Module ie Product
& 1 no on Waste flow. Pressure Gauge of 0-4 kg/cm2 – 1no After Micron Filter & 0- 20
kg/cm2 after high pressure pump. Limit Switches to protect the pump from high and low
pressure ie before & after high pressure pump . Pressure Control Valve at reject water
line – 1no .
345
Annexure-D
150LPH WATER PURIFICATION PLANTS - SPARE PARTS
Specifications for 150 LPH RO Plant
Sl.
Descrption Qty
No.
1 RO membrane – 1
For Capacity of 150 litres - Minimum salt rejection:98% Permeate flow: 300GPD Diameter:
3 inch Length: 12 inch Testing pressure : 65 psi Testing temperature: 25 °C PH value
of testing solution: 6.5-7.5 Concentration of testing solution:1000ppm Recovery rate of
single membrane element: 10% Max feedwater temperature : 45 °C PH value range of
feedwater: 4-11 Max NTU of feedwater: 1 Max SDI of feedwater: 5 Max concentration of
free chlorine:0.1ppm
2 For RO Plant Raw Water Pump 1
a. Pump Side
Horizontal PeripheralPumpClose Coupled pumps, having Single-piece barrel casing,
with front suction port abovepumps axis and radial delivery at top. Pump Casing &
Casing Cover , Spacer Sleeve Should be in Cr.Ni Steel AISI 304. Shaft Should be Cr.Ni
Steel AISI 303. Mechanical seal suitable for RO Application.Suction lift upto9mtrs
b. Motor Side
2 polemotor with Standard voltage for Single phase 230V with Voltage variation +10%
/ - 10%. Insulation class F & Protection – IP54. Classification Scheme of minimum IE3
rating. Motor inbuilt thermal protector is mandatory.
Pump Model : NGXM 2
Design Flow : 0.5 m3/hr
Design Head : 10mtr
Rated Motor : 0.33 kW / 0.5 HP
3 For RO Plant High pressure Water Pump 1
a.Pump Side
Vertical multi-stage pumps with suction and delivery connections of the same diameter
and arranged along the same axis (in-line). Corrosion-resistant bearing sleeves lubricated
by the pumped liquid.A pump with thrust bearing and sleeve coupling for use of any
standard motor with IM V1 construction.Pump Casing , impeller, stage casing & Casing
Cover , Spacer Sleeve Should be in Cr.Ni Steel AISI 304. Shaft Should be Cr.Ni Steel
AISI 303. Mechanical seal suitable for RO ApplicationRecommended WRAS certified
Pump.
b. Motor Side
2 polemotor with Standard voltage for three phase 400V with Voltage variation +5%
/ - 5%. Insulation class F & Protection – IP54. Classification Scheme of minimum IE2
rating..
Pump Model : MXVB25-206
Design Flow : 1.0 m3/hr
Design Head : 60mtr
Rated Motor : 1.1 kW / 1.5 HP
346
4 Control Panel 1
Panel Dimension Shouldbe minimum 450mm (W) x 250 (H) mm x 450 (D) mm. Sheet
thickness should be 1.6 & 2mm finished with powered coated RAL 7035. It has to operate
with both Auto / manual . Float switch for raw water tank has to be connected in this to
avoid dry run. Analog Voltmeter and Ammeter should be there for metering. Electrical
protection like Phase Reverse, UV, OV, Phase Fail, Neutral Fail, Asymmetry, Over Current
(OLR) are mandatory. Phase indication lamp for R,Y,B , PUMP ON/OFF, Pump trip,
Supply Unhealthy, Float Switch fault. Raw water Pump & High pressure Pump Control
Should be inside this panel.
5 Micron Filter 1
Micron cartridge filter for removing Suspended particles >5 micron. Should have capacity
of 150 litres /hour . material of Catridge should be polypropylene having length of 20”.
6 Skid 1
Stainless steel Skid rectangular type for capacity of 150 LPH – 1no with above mentioned
items mounted on it.
Instrumentation
Flow indicators of 2 numbers – float type panel mounted 1 no on RO Module ie Product
& 1 no on Waste flow. Pressure Gauge of 0-4 kg/cm2 – 1no After Micron Filter & 0- 20
kg/cm2 after high pressure pump. Limit Switches to protect the pump from high and low
pressure ie before & after high pressure pump . Pressure Control Valve at reject water
line – 1no .
347
Annexure-E
250 LPH WATER PURIFICATION PLANTS - SPARE PARTS
348
ANNEXURE-E/1
Water purification plants : Supplying, Installation and Commissioning of fully automatic Water
purification plant (RO+UV+UF)with all accessories piping, product water tank on single phase power
supply on Turnkey/EPC Basis as per the enclosed detailed Technical Specifications including cost of
material applicable taxes and duties loading and unloading,
250 LPH
Descrption Specification Quantity Make
A Materials
1 Raw Water N/A N/A
Pump
2 Micron Catridge Micron cartridge filter for removing Suspended 2 neopure/nzo/
Filter particles >10 &5 micron. Should have capacity of Equivalent
100 litres /hour . material of Catridge should be
polypropylene having length of 10” X 2.5" dia.
3 Sand Filter N/A N/A
4 Carbon Filter N/A N/A
5 Anti Scalant Transparent glassy balls of size 16.5mm to 17.5mm 8 Elixer/saitech/
Dosing System dia,weight approximately 9 to 11gm and should pentapure/
& Chemicals have the PH of 6.5 to 7.5 equvalent
6 High Pressure Pump Side 1 Calpeda/flowjet/
Pump IE2 rating.. grundfos/E-chain/
Design Flow :0.096-0.144 m3/hr cosmos
Design Head :3mtr
Rated Motor :24VDC,5A,120W
7 RO Membrane For Capacity of 100 litres / hour Sprial wound TFC 2 vontron/
Polyamide suitable size Dia 2.5” x 10” long . No dowfilmtech/
of membrane Shall have 2 numbers and the No of TorrayHydronautics/
membrane housing shall be 2. Equivalent
8 RO Housing For Capacity of 100 litres / hour Sprial wound TFC 2 Elixer/saitech/
Polyamide suitable size Dia 2.5” x 10” long . the No pentapure/
of membrane housing shall be 2. equvalent
9 CIP System Autoflush SV 24V, Function- use for chemical 1 Elixer/saitech/
cleaning of RO Membranes over a period of pentapure/ORG/
timeFRP/ Engineering Grade Plastic5 Micron2.5 equvalent
Mtr /Sec PP
10 Dispensing N/A N/A
Pump
11 Coin box / card N/A N/A
12 SS Cabin Fully enclosed stainless steel 304 grade Cabinet 1 Elixer/saitech/
with 4 no's mounting wheels(63mm dia) of lenth pentapure/ORG/
1100mm X width 530mm X height 1940mm.ground equvalent
clearences should be minimum 100mm,purification
system should be visible for easy maintenance.
349
5 no's of half inch size SS taps for drinking
purpose.Fully water proof Stickers and branding
as per government official guidance.Tray for bottle
dispense of suitable size of SS Make.
13 Storage Tank 200 Litres inbuilt Stainless Storage Tank with 1/2" 1 set Aqua / Elixir / Nova
SS taps 5 nos should be provided. For Low and / Eqvi
high level flow control , commericial float switch
should be provided.
14 Multiport Valve N/A N/A
15 Control Panel N/A N/A
with Data
Transfer to
Server
16 Instruementation Low Pressure Switch(24v) for raw water protections 1set Danfose/Uflow/
items at inlet should be provided.3/8" Solenyed Valve org-cherry/EAC/
of range (with Brass made 0-10bar) 24 volt DC Equivalent
should be provided for high pressure pump for low
pressure cutoff /Stainless steel float switch with
suitable cable for proper operation of the system.
smps 5a, Function-to measure pressurePump
outlet, Filter outlet, Pressure pump
• 3/8" 24 volt DC PVC Auto flush system with
solenoid valve
• Pressure controler valve
• 1/4"-3/8" TDS controler fFor backup the
instrumentation 230V as input and 24v DC,5A
output switch mode power supply unit should be
provided.
17 sediment filter To remove dust,dirt,clay etc of polypropelyene size 1 bio +/Elixer/
10" long x 2.5" dia Equivalent
18 Pre- carbon To remove chlorine,iodine,odour,bad taste and 1 bio +/Elixer/
color etc of Coconut shell/Charcoal based size 10" Equivalent
long x 2.5" dia
19 Mineral filter To remove acidic waste in the body, supplies 1Set bio +/Elixer/
minerals. Improves PH & taste of water etc of Equivalent
antebacteria balls (mineral Ceramic, alkaline,
antibacterial, touramaline, taste enhancer, oxygen
reduction potential and silver activated carbon balls
size 10" long x 2.5" dia
20 UV set 11 w UV tube with stainless steel housing size 8" 1 set Alfa/ Phillips/
long with inlet outlet dia 1/4" to 3/8" Function-to ACE Hygiene or
disinfect water, will kill bacteria and equivalent
micro-organisms upto 99.9%
21 UF Membrane For Capacity of 100 litres / hour Sprial wound 1 vontron/
Polypropelyene suitable size Dia 2.5” x 10” long . dowfilmtech/
No of membrane Shall have 2 numbers and the No TorrayHydronautics/
of membrane housing shall be 2. Bioplus/
ElixerEquivalent
350
ANNEXURE-F
500 LPH WATER PURIFICATION PLANTS - SPARE PARTS
Annexure-F
Sl. No. Particulars Qty
1 Raw Waetr Pump 1 Hp 1
2 Vessel 1054 2
3 25 Nb Top mount filter Compo 2
4 Media 130
5 Carbon 600Iv 25
6 20" Housing 3/4" 1
7 20" Spun 1
8 4" X 40" Membrane 2
9 4" X 40" M Housing 2
10 Pump 2-11 1
11 Skid 1
12 Electrical Control Panel 1
12.a Card And Coin Machine 1
12.b Battery And Charger(UPS) 1
12.c Data Transmission Kit (Iot) 1
13 Pressure Gauage 2
14 Flow Meter 1/2" 2
14.a Float Switch 2
14.b TDS & pH Sensor 1
15 LPS & HPS 2
16 Dosing Pump 1
17 Antiscalent Chemical 5
18 SS Tank 2000 Ltr 1
19 Upvc Materials 1
351
Annexure-F/1
Supply installation commissiong with qulity test report of the whole of drinking water distribution/
dispensing plants/units of capacity 500 LPH RO plant with product water as per BIS standards on
single phase power supply including Warranty,Operation & maintainance for 60 Months.(As per
Technical Specification).
TECHNICAL SPECIFICATION FOR 500LPH PURE DRINKING WATER PLANTS, (RO, UF+UV) SS
352
Make Zephyr/ Ametak-USA/MMP/Parker/Aventura/Hitech or equivalent
5 Sand filter Pressure sand Filter (PSF) to remove any Turbidity in water
Flow Rate As per plant requirement
Material of Housing FRP/Engineering grade plastic
Size As per plant requirement (13"x54")
Media Pebbels, Gravel, Coarse Sand , Fine Sand & Antracite of Suitable
Quanitity as per plant Requirement
MOCof housing FRP
Make Pentair/Aventura/Hitech/Gopani/Advanced composite or equivalent
to these make
6 Anti scalant Dosing System Function- to inhibit scaling of hardness salt and Silica on RO
membranes
Pump 1 Set
Make KIDSPAE/Meltonroy/E-Dose/Injecta/Pentair/ Nuton/GE Thermax/
equivalent
Quantity 1 No.
Type Electronic/Diaphragm Type
Capacity 0-6LPH
Quantity of tank 1 No.
Capacity of Tank 100 ltr.
MOC of tank FRP/MSRL/HDPE
Make of Tank Any Standard Indian Make - ISI
7 High Pressure Pump & motor Function-to develop required pressure for Reverse Osmosis on RO
Membranes
Type Vertical Centrifugal Multistage 2.5 m3/hr flow 10-13 bar pressure
a). Pump External jacket, suction
casing, delivery casing, chorome-nickel steel 1.4301 EN 10088 (ASI 304)
impeller, lower cover, Uppre
cover, Spacer sleeve.
pump shaft, plug chorome-nickel steel 1.4301 EN 10088 (ASI 303)
mechanical seal, Ceramic alumina/ carbon/EPDM
SO 3069-KU
Wear ring PTFE
O-ring NBR
MOC of pump casing SS316 / SS 304
b). motor IS 12615:2014, IEC 60034/30, Rating IE3 with IP 65 protection and
class F insultion
Capacity As per plant requirement
Pressure and power As per plant requirement
353
8 Pressure Vessel Function-to house RO Membranes under pressure
Item RO Module consisting of membrane housing with RO membrane
mounted on SS skid 40mm sq tube. 1.5 tank 304 nicker less then
6%
MOC FRP
Diameter As per plant requirement (4")
Length As per plant requirement (40")
Make Codeline/ Phoenix/Aventura/ Aqueous / protec/pentair/Maxima /
Advance or equivalent
9 Membrane Function-to remove dissolved salt, all kind of heavy metals from
water by Reverse Osmosis to produce permeate water having less
dissolved salt/parameters confirming BIS 10500:2012 and reject
water having highly concentrated salt.
Type TFC, Polyamide
Size As per plant requirement
Average Flux <18 GFD
Make DOW Filmtec-USA, / Hydranautics / Burton/ Oltermare toray GE-
Wave cyber
Operating Water Temperature Ambient Temperature
10 Ultra Filteration Function-Blending RO outpit water with UF Permeate water to adjust
PH &TDS of output water.
Type Spirally wound PAN,PS,PES,PVDF
Size as per plant requirement(4 X 40inch) 5 No.s
Average Flux 25 LMH to 35LMH
Make DOW Filmtec-USA, / Hydranautics / Burton/ Oltermare toray
Operating Water Temperature Ambient Temperature
Membrane Housing Make Advanced composite aventura,Hitech,pentair or equivalent
MOC of housing FRP
11 UltraViolate System/ Ozone Function-to disinfect water, kill bacteria and micro-organisms
disinfection System
Capacity As per plant requirement
Make Alfa/ Phillips/ ACE Hygiene / Hitech or equivalent/kidspae
12 Cleaning in Place(CIP) System Function- use for chemical cleaning of RO Membranes over a
period of time
Quantity of tank 1 No.
Capacity of tank As per plant requirement
MOC to tank FRP/MSRL/PE
Make of tank Any Stadard Indian Make - ISI Brand
Micron Cartridge Filter 1 No.
Flow rate As per plant requirement
354
MOC FRP/Engineering grade plastic
No. of Cartridge housing As per plant requirement
Micron Rating 5 Micron
Flow velocity 2.5 Mtr/Sec
MOC of cartridge pp
13 Product Water Storage Tank Function–For storage of Product Water from R.O. Plant
with support stand,drain trey
Type/ MOC SS 304 thickness 0.8mm
Control Provision of Low Level and High Level Switch
Capacity 2000 ltrs – Shell thickness not less than 0.8mm
14 Pressure Pump for Dispencing Function - Create Pressure for Dispencing system
Horizontal - Centrifugal
MOC SS 304
Number 1 No's
Capacity As per plant Requirement
Pressure As per plant Requirement
Make Grundfos /Mahendra /Nuton/Kirloskar /Crompton greaves/
equivalent
15 SS SKID Function-to mount RO system ,
SIZE as per requirement for 1000 LPH RO
Material SS 304 with standard thickness and quality 40mm 1 and half inches
Instrumentation &Controls
A Pressure Gauges Function-to measure pressure
Quantity 4 No
Location Pump outlet, Filter outlet, High pressure pump discharge and RO
Reject
Range 0-7 Kg/cm2
Location Feed pump outlet/Filter outlet
Quantity 2 No
Location High pressure pump discharge and RO reject
Range 0-20 Kg/ cm2
Make Forbes Marshal/Waree or equivalent
B Flow Indicator Function-to measure flow rate at location
Quantity 3 No.
Location RO Feed, RO Product, Reject
Type Float type, panel mounted
Max operating temperature 40 degree centigrade
Measure points RO Feed, RO Product, Reject
Make Flow Max/ Eureka/ GF or equivalent
355
Instrumentation & Control
C
System
• High pressure switch and
low pressure switch
• Back wash system with
solenoid valve
• Electric control panel
with “A” meter, Voltmeter
indicators,
• Pressure control valves
• TDS meter
• Combo Dispensing system/
(android base remote
operated with facilities of
push button for coin and
provision of (ATW) smart
card System,
• push button should be
provided to stop water
dispensing any time.
• UPS for water dispensing in
absence of power
• flushing switch with solenoid
valves
• Micro base panel with GSM
Facility.
• System Should have
compatibility to remote
access, control and
monitoring
• Real time remote monitoring
& control system to monitor
health & performance of the
plant. The unit should contain
ARM based micro controller
unit and GPRS module.
The unit should be able
to monitor all the sensors,
Flow sensors & Pump
power consumption(Energy
meters) and control pumps
automatically based on
sensor & programmed
schedule.
356
It then should send all the
prameters over GPRS network in
realtime with configurable interval
from 15 minutes to 24 hours.
Default transmission interval
should be 15 minutes.The
protocol for sending should be
CSV over HTTP and FTP.Default
should be set to FTP.(www.
wpprwskar.in:7443 protocol info
should be added).
NOTE:
1. Anti scalant use Only NSF 60 Approved Chemicals.
2. The piping and accessories used upto RO Membrane shall be CPVC.
3. Piping from Output of Pure Water to Coin Vending Machine and smart card shall be in Stainless
Steel SS 304.
4. All required electrical components shall be of relevant BIS code and IS standard.
5. Design of RO system must be done keeping in mind pollution norms of reject management and
accordingly RO recoveries must be optimized
6. All the components and fixtures used should be foodgrade and drinking water compatible.
7. All the components materials of works should conform to IS relevent codes/ drinking water BIS
standards.
8. PÁªÀÄUÁjUÀ¼ÀÄ C¼ÀªÀr¸ÀĪÀ ¥ÀæªÀÄÄR CA±ÀUÀ¼ÁzÀ RO Membrane ªÀÄvÀÄÛ High pressure pump UÀ¼ÀÄ w½¹gÀĪÀ
«²µÀ× «ªÀgÀuÉAiÀÄAvÉ (Detailed Specification) EgÀĪÀ §UÉÎ PÁAiÀÄð¥Á®PÀ C©üAiÀÄAvÀgÀgÀÄ gÀªÀjAzÀ zÀÈrüÃPÀj¹PÉÆAqÀÄ
C¼ÀªÀr¸ÀĪÀÅzÀÄ.
357
ANNEXURE-G
500 LPH WATER PURIFICATION PLANTS - SPARE PARTS FRP
358
Annexure-G/1
TECHNICAL SPECIFICATION FOR 500 LPH PURE DRINKING WATER PLANT (RO, UF+UV) FRP
359
5 Sand Filter Pressure sand Filter (PSF) to remove any Turbidity in water
Flow Rate As per plant requirement
Material of Housing FRP/Engineering grade plastic
Make Filtrex/Parker/Raxor/ equivalent
Anti scalant Dosing Function- to inhibit scaling of hardness salt and
6
System Silica on RO Membranes
Pump 1 Set
Make ASIALMI/ Sonder/ Prominent/ E-Dose/Injecta/Pentair/ equivalent
Quantity 1 No.
Type Electronic Diaphragm Type
Capacity 0-5LPH
Quantity of tank 1 No.
Capacity of Tank 100 ltr.
MOC of tank PE/FRP/MSRL
Make of Tank Indian
High Pressure Pump Function-to develop required pressure for Reverse
7
Osmosis on RO Membranes
Type Vertical Centrifugal Multistage
MOC SS316 / SS 304
Number One
Make Grundfos/Mahindra/CRI/ KSB/Crompton Greaves/CNP/Kirloskar/
Calpida.
Capacity As per plant requirement
Pressure and power As per plant requirement
360
Membrane Function-to remove dissolved salt all kind of heavy metals from
water by Reverse Osmosis to produce permeate water having less
9
dissolved salt/parameters confirming BIS 10500:2012 and reject
water having highly concentrated salt.
Type TFC, Polyamide
Size As per plant requirement
Average Flux <18 GFD
Make DOW Filmtec-USA, / Hydranautics /
or equivalent
Operating water Ambient Temperature
Temperature
Ultra Violate System + Ozone Function-to disinfect water, will kill bacteria and
10 disinfection System. micro-organisms
Capacity As per plant requirement
Make Alfa/ Phillips/ ACE Hygiene or equivalent
Cleaning in Place(CIP) Function- use for chemical cleaning of RO
11
System Membranes over a period of time
Quantity of tank 1 No.
Capacity of tank As per plant requirement
MOC to tank FRP/ MSRL/PE/SS
Make of tank Indian
Micron Cartridge Filter
Flow rate As per plant requirement
MOC FRP/ Engineering Grade Plastic
No. of Cartridge housing As per plant requirement
Micron Rating 5 Micron
Flow velocity 2.5 Mtr /Sec
MOC of cartridge PP
Product Water Storage Function–For storage of Product Water from R.O.
12
Tank Plant
Type/ MOC SS 304 storage tank for 250LPH – 500Ltrs,500LPH –
1000Ltrs,1000LPH – 2000Ltrs.
Control Provision of Low Level and High Level Switch
Capacity storage tank 1000/2000 ltrs –site specific,250 – 500LPH
361
Instrumentation &Controls
Quantity 4 No
Quantity 2 No
MOC SS
Quantity 3 No.
362
C Instrumentation & Control System
• High pressure switch and
low pressure switch
• Back wash system with
solenoid valve
• Electric control panel with “A”
meter, Voltmeter indicators, on
off switch
• Pressure control valve
• TDS meter
• Automation to collect pure
drinking water of 20 ltr by
dropping 1 nos of one rupee
coins or 10 ltrs by dropping one
rupee coins / Any Time Water
(ATW) smart card System
with GSM.The unit should
be able to monitor all the
sensors, Flow sensors & Pump
power consumption(Energy
meters) and control pumps
automatically based on sensor
& programmed schedule
Note:
1) The piping and accessories used after high pressure pump i.e from high pressure pump to product water
tank shall be SS/UPVC 316 grade.
2) All the Equipment/Instruments shall conform to BIS tandards.
3) Indian make membranes duly certified by National agency may be used.
4) Mounting Skid of RO system to be SS 304 grade,32/40MM.
363
Annexure-H
1000 LPH WATER PURIFICATION PLANTS - SPARE PARTS SS
Sl. No. Particulars Qty
1 Raw Waetr Pump 1 Hp 1
2 Vessel 1354 2
3 25Nb Valve 2
4 Media 250
5 Carbon 600Iv 100
6 20"Jumbo Housing 1
7 20"Jumbo Spun 1
8 8" X 40" Membrane 1
9 8" X 40" M Housing 1
10 Pump 2-18 Iii Ph 1
11 Skid 1
12 Electrical Control Panel 1
12.a Card And Coin Machine 1
12.b Battery And Charger(UPS) 1
12.c Data Transmission Kit (Iot) 1
13 Pressure Guage 2
14 Flow Meter 3/4" 2
14.a Float Switch 2
14.b TDS & pH Sensor 1
15 LPS & HPS 2
16 Dosing Pump 1
17 Antiscalent Chemical 8
18 SS Tank 2000 Ltr
19 Upvc Materials
364
Annexure-H/1
TECHNICAL SPECIFICATION FOR 1000 LPH PURE DRINKING WATER PLANT (RO, UF+UV) SS
365
MOC of cartridge PP
Make Zephyr/ Ametak-USA /MMP/Parker or equivalent
5 Sand Filter Pressure sand Filter (PSF) to remove any Turbidity in water
Flow Rate As per plant requirement
Material of Housing FRP/Engineering grade plastic
Make Filtrex/Parker/Raxor/ equivalent
6 Anti scalant Dosing Function- to inhibit scaling of hardness salt and
System Silica on RO Membranes
Pump 1 Set
Make ASIALMI/ Sonder/ Prominent/ E-Dose/Injecta/Pentair/ equivalent
Quantity 1 No.
Type Electronic Diaphragm Type
Capacity 0-5LPH
Quantity of tank 1 No.
Capacity of Tank 100 ltr.
MOC of tank PE/FRP/MSRL
Make of Tank Indian
7 High Pressure Pump Function-to develop required pressure for Reverse
Osmosis on RO Membranes
Type Vertical Centrifugal Multistage
MOC SS316 / SS 304
Number One
Make Grundfos/Mahindra/CRI/ KSB/Crompton Greaves/CNP/Kirloskar/
Calpida.
Capacity As per plant requirement
Pressure and power As per plant requirement
8 Pressure Vessel Function-to house RO Membranes under pressure
Item RO Module consisting of membrane housing with
RO membrane mounted on SS skid
MOC FRP
Diameter As per plant requirement
Length As per plant requirement
366
Make Codeline/ Phoenix/ Aqueous / Protec / Maxima /Advance or
equivalent
9 Membrane Function-to remove dissolved salt all kind of heavy metals from
water by Reverse Osmosis to produce permeate water having
less dissolved salt/parameters confirming BIS 10500:2012 and
reject water having highly concentrated salt.
Type TFC, Polyamide
Size As per plant requirement
Average Flux <18 GFD
Make DOW Filmtec-USA, / Hydranautics /
or equivalent
Operating water Ambient Temperature
Temperature
10 Ultra Violate System + Ozone Function-to disinfect water, will kill bacteria and
disinfection System.
micro-organisms
Capacity As per plant requirement
Make Alfa/ Phillips/ ACE Hygiene or equivalent
11 Cleaning in Place(CIP) Function- use for chemical cleaning of RO
System Membranes over a period of time
Quantity of tank 1 No.
Capacity of tank As per plant requirement
MOC to tank FRP/ MSRL/PE/SS
Make of tank Indian
Micron Cartridge Filter
Flow rate As per plant requirement
MOC FRP/ Engineering Grade Plastic
No. of Cartridge housing As per plant requirement
Micron Rating 5 Micron
Flow velocity 2.5 Mtr /Sec
MOC of cartridge PP
12 Product Water Storage Function–For storage of Product Water from R.O.
Tank Plant
Type/ MOC SS 304 storage tank for 250LPH – 500Ltrs,500LPH –
1000Ltrs,1000LPH – 2000Ltrs.
367
Control Provision of Low Level and High Level Switch
Capacity storage tank 1000/2000 ltrs –site specific,250 – 500LPH
Instrumentation &Controls
A Pressure Gauges Function-to measure pressure
Quantity 4 No
Location Pump outlet, Filter outlet, High Pressure pump
Discharge and RO Reject
Range 0-7 Kg/cm2
Location Feed pump outlet /Filter outlet
Quantity 2 No
Location High pressure pump discharge and RO reject
Range 0-20 Kg/ cm2
Make Forbes Marshal/Waree or equivalent
MOC SS
B Flow Indicator Function-to measure flow rate at location
Quantity 3 No.
Location RO Feed, RO Product, Reject
Type Float type, panel mounted
Max, operating 40 degree centigrade
Temperature
Measuring points RO Feed, RO Product, Reject
Make Flow Max/ Blue &White/ FIP/ Eureka/ GF or equivalent
C Instrumentation & Control System
• High pressure switch and
low pressure switch
• Back wash system with
solenoid valve
• Electric control panel with
“A” meter, Voltmeter indicators,
on off switch
• Pressure control valve
• TDS meter
368
• Automation to collect pure
drinking water of 20 ltr by
dropping 1 nos of one rupee
coins or 10 ltrs by dropping one
rupee coins / Any Time Water
(ATW) smart card System with
GSM.
The unit should be able to monitor
all the sensors, Flow sensors &
Pump power consumption(Energy
meters) and control pumps
automatically based on sensor &
programmed schedule
Note:
1) The piping and accessories used after high pressure pump i.e from high pressure pump to product water
tank shall be SS/UPVC 316 grade.
369
Annexure-I
1000 LPH WATER PURIFICATION PLANTS - SPARE PARTS FRP
370
Annexure-I/1
TECHNICAL SPECIFICATION FOR 1000 LPH PURE DRINKING WATER PLANT (RO, UF+UV) FRP
1 Raw Water Storage Tank Function– For storage of raw water
Type/ MOC Two/Three Layered PE tanks made from virgin material of Food
Grade Quality, suitable for the purpose of providing / Storage drinking/
portable water OR
If necessary, extra storage facility in the form of 5 KL Sump may be
provided where source fluctuation persists.For1000 LPH FRP -5KL
Sump
Control Provision of Low Level and High Level Switch
Capacity 2000 ltrs /3000 ltrs –site specific
Make Sintex /Poly Plast/Frontier/Ganga or Equivalent
2 Inlet Pump Function– to feed water from storage tank to filter
Type Horizontal Centrifugal
Number One
Make Grundfos /CRI/Mahindra /Kirloskar /Crompton greaves/ equivalent
Capacity As per plant requirement
Pressure and power As per plant requirement
3 Multi Grade Sand Filter with Function– to remove pesticide, insecticide and biological impurities
MPV Granular Activated Carbon from water.
Filter with min 900 Iodine Value
with MPV
Flow Rate As per plant requirement
MOC FRP/Engineering grade plastic
No. of Cartridge Housing As per plant requirement
Make Parker/Raxor/Gopani/ equivalent
4 Micron Cartridge Filter Function- fine filtration of water for removal of
Suspended solids up to1micronmicronsizetoprevent chocking/
blockageon UF Membrane
Flow rate As per plant requirement
MOC FRP/Engineering grade plastic/ equivalent
NO. of Cartridge housing As per plant requirement
Micron Rating 0.5 Micron
Flow velocity 2.5 Mtr/Sec
MOC of cartridge PP
Make Zephyr/ Ametak-USA /MMP/Parker or equivalent
371
5 Sand Filter Pressure sand Filter (PSF) to remove any Turbidity in water
Flow Rate As per plant requirement
Material of Housing FRP/Engineering grade plastic
Make Filtrex/Parker/Raxor/ equivalent
6 Anti scalant Dosing Function- to inhibit scaling of hardness salt and
System Silica on RO Membranes
Pump 1 Set
Make ASIALMI/ Sonder/ Prominent/ E-Dose/Injecta/Pentair/ equivalent
Quantity 1 No.
Type Electronic Diaphragm Type
Capacity 0-5LPH
Quantity of tank 1 No.
Capacity of Tank 100 ltr.
MOC of tank PE/FRP/MSRL
Make of Tank Indian
7 High Pressure Pump Function-to develop required pressure for Reverse
Osmosis on RO Membranes
Type Vertical Centrifugal Multistage
MOC SS316 / SS 304
Number One
Make Grundfos/Mahindra/CRI/ KSB/Crompton Greaves/CNP/Kirloskar/
Calpida.
Capacity As per plant requirement
Pressure and power As per plant requirement
8 Pressure Vessel Function-to house RO Membranes under pressure
Item RO Module consisting of membrane housing with
RO membrane mounted on SS skid
MOC FRP
Diameter As per plant requirement
Length As per plant requirement
Make Codeline/ Phoenix/ Aqueous / Protec / Maxima /Advance or
equivalent
372
9 Membrane Function-to remove dissolved salt all kind of heavy metals from
water by Reverse Osmosis to produce permeate water having less
dissolved salt/parameters confirming BIS 10500:2012 and reject
water having highly concentrated salt.
Type TFC, Polyamide
Size As per plant requirement
Average Flux <18 GFD
Make DOW Filmtec-USA, / Hydranautics /
or equivalent
Operating water Ambient Temperature
Temperature
10 Ultra Violate System + Ozone Function-to disinfect water, will kill bacteria and
disinfection System. micro-organisms
Capacity As per plant requirement
Make Alfa/ Phillips/ ACE Hygiene or equivalent
11 Cleaning in Place(CIP) Function- use for chemical cleaning of RO
System Membranes over a period of time
Quantity of tank 1 No.
Capacity of tank As per plant requirement
MOC to tank FRP/ MSRL/PE/SS
Make of tank Indian
Micron Cartridge Filter
Flow rate As per plant requirement
MOC FRP/ Engineering Grade Plastic
No. of Cartridge housing As per plant requirement
Micron Rating 5 Micron
Flow velocity 2.5 Mtr /Sec
MOC of cartridge PP
12 Product Water Storage Function–For storage of Product Water from R.O.
Tank Plant
Type/ MOC SS 304 storage tank for 250LPH – 500Ltrs,500LPH –
1000Ltrs,1000LPH – 2000Ltrs.
Control Provision of Low Level and High Level Switch
Capacity storage tank 1000/2000 ltrs –site specific,250 – 500LPH
373
Instrumentation &Controls
A Pressure Gauges Function-to measure pressure
Quantity 4 No
Location Pump outlet, Filter outlet, High Pressure pump
Discharge and RO Reject
Range 0-7 Kg/cm2
Location Feed pump outlet /Filter outlet
Quantity 2 No
Location High pressure pump discharge and RO reject
Range 0-20 Kg/ cm2
Make Forbes Marshal/Waree or equivalent
MOC SS
B Flow Indicator Function-to measure flow rate at location
Quantity 3 No.
Location RO Feed, RO Product, Reject
Type Float type, panel mounted
Max, operating 40 degree centigrade
Temperature
Measuring points RO Feed, RO Product, Reject
Make Flow Max/ Blue &White/ FIP/ Eureka/ GF or equivalent
374
C Instrumentation & Control
System
• High pressure switch and
low pressure switch
• Back wash system with
solenoid valve
• Electric control panel
with “A” meter, Voltmeter
indicators, on off switch
• Pressure control valve
• TDS meter
• Automation to collect pure
drinking water of 20 ltr by
dropping 1 nos of one rupee
coins or 10 ltrs by dropping
one rupee coins / Any Time
Water (ATW) smart card
System with GSM.
The unit should be able
to monitor all the sensors,
Flow sensors & Pump power
consumption(Energy meters)
and control pumps automatically
based on sensor & programmed
schedule
Note:
1) The piping and accessories used after high pressure pump i.e from high pressure pump to product water
tank
2) All the Equipment/Instruments shall conform to BIS standards.
375
Annexure-J
2000 LPH (FRP) WATER PURIFICATION PLANTS - SPARE PARTS
376
Annexure-J/1
Supply installation commissiong with qulity test report of the whole of drinking water distribution/
dispensing plants/units of capacity 2000 LPH RO plant with product water as per BIS standards on
single phase power supply including Warranty,Operation & maintainance for 60 Months.
(As per Technical Specification).
TECHNICAL SPECIFICATION FOR 2000LPH PURE DRINKING WATER PLANTS
FOR REVERSE OSMOSIS WITH CAPACITY FROM
Detail specification of the Product of 2000 LPH (FRP)- RO plant
1 Raw Water Storage Tank with Function–storage of raw water
low level and high level switch.
Type/ MOC Three Layered HDPE tanks made from virgin material of Food
Grade Quality, suitable for the purpose of Storage of drink-
ing /portable water. (where source fluctuation persists or space
constraint exists underground sump may be provided).
Control Provision of Low Level and High Level Switch
Capacity 5000 Ltr tank
Make Sintex /Poly Plast/Frontier/Ganga or Equivalent
2 Inlet Pump Function– to feed water from storage tank to filter
Type Horizontal Centrifugal
Number One
Make Grundfos /Mahendra /Nuton/Kirloskar /Crompton greaves/ equiva-
lent to these make
MOC SS -316/SS-304
Capacity As per plant requirement (2.5m3 per hour) as per new specification
Pressure and power As per plant requirement (3kg / sq cm, 1.50 HP)
3 Granual Activated Carbon Filter Function– to remove pesticide, insecticide and biological impurities
with min 900 Iodin value with from water.
auto MPV
Flow Rate As per plant requirement
MOC of housing FRP
Size As per plant requirement (13"X54")
Make Gopani/Aventura/Pentair/Hitech/equivalent to these make
4 Micron Cartridge Filter Function- fine filtration of water for removal of Suspended solids up
to 1 micron size to prevent chocking/ blockage of UF Membrane (if
necessary)
Flow rate As per plant requirement 4m3/hrs
MOC of Cartridge housing FRP/Engineering grade plastic/equivalent
377
NO. of Cartridge housing As per plant requirement 2 Nos
Micron Rating 5 Micron & 1 Micron
Flow valocity 2.5 Mtr/Sec
MOC of cartridge PP
Make Zephyr/ Ametak-USA/MMP/Parker/Aventura/Hitech or equivalent
5 Sand filter Pressure sand Filter (PSF) to remove any Turbidity in water
Flow Rate As per plant requirement
Material of Housing FRP/Engineering grade plastic
Size As per plant requirement (13"x54")
Media Pebbels, Gravel, Coarse Sand , Fine Sand & Antracite of
Suitable Quanitity as per plant Requirement
MOCof housing FRP
Make Pentair/Aventura/Hitech/Gopani/Advanced composite or
equivalent to these make
6 Anti scalant Dosing System Function- to inhibit scaling of hardness salt and Silica on RO mem-
branes
Pump 1 Set
Make KIDSPAE/Meltonroy/E-Dose/Injecta/Pentair/ Nuton/GE Thermax/
equivalent
Quantity 1 No.
Type Electronic/Diaphragm Type
Capacity 0-6LPH
Quantity of tank 1 No.
Capacity of Tank 100 ltr.
MOC of tank FRP/MSRL/HDPE
Make of Tank Any Standard Indian Make - ISI
7 High Pressure Pump & motor Function-to develop required pressure for Reverse Osmosis on RO
Membranes
Type Vertical Centrifugal Multistage 2.5 m3/hr flow 2-13 to 15 bar pres-
sure
a). Pump External jacket, suction chorome-nickel steel 1.4301 EN 10088 (ASI 304)
casing, delivery casing, impel-
ler, lower cover, Uppre cover,
Spacer sleeve.
pump shaft, plug chorome-nickel steel 1.4301 EN 10088 (ASI 303)
mechanical seal, Ceramic alumina/ carbon/EPDM
SO 3069-KU
378
Wear ring PTFE
O-ring NBR
MOC of pump casing SS316 / SS 304
b). motor IS 12615:2014, IEC 60034/30, Rating IE3 with IP 65 protection and
class F insultion
Capacity As per plant requirement
Pressure and power As per plant requirement
379
11 UltraViolate System/ Ozone Function-to disinfect water, kill bacteria and micro-organisms
disinfection System
Capacity As per plant requirement
Make Alfa/ Phillips/ ACE Hygiene / Hitech or equivalent/kidspae
12 Cleaning in Place(CIP) System Function- use for chemical cleaning of RO Membranes over a
period of time
Quantity of tank 1 No.
Capacity of tank As per plant requirement
MOC to tank FRP/MSRL/PE
Make of tank Any Stadard Indian Make - ISI Brand
Micron Cartridge Filter 1 No.
Flow rate As per plant requirement
MOC FRP/Engineering grade plastic
No. of Cartridge housing As per plant requirement
Micron Rating 5 Micron
Flow velocity 2.5 Mtr/Sec
MOC of cartridge pp
13 Product Water Storage Tank Function–For storage of Product Water from R.O. Plant
with support stand,drain trey
Type/ MOC SS 304 thickness 0.8mm
Control Provision of Low Level and High Level Switch
Capacity 2000 ltrs – Shell thickness not less than 0.8mm
14 Pressure Pump for Dispencing Function - Create Pressure for Dispencing system
Horizontal - Centrifugal
MOC SS 304
Number 1 No's
Capacity As per plant Requirement
Pressure As per plant Requirement
Make Grundfos /Mahendra /Nuton/Kirloskar /Crompton greaves/ equiva-
lent
15 SS SKID Function-to mount RO system ,
SIZE as per requirement for 1000 LPH RO
Material SS 304 with standard thickness and quality 40mm 1 and half inches
Instrumentation &Controls
380
A Pressure Gauges Function-to measure pressure
Quantity 4 No
Location Pump outlet, Filter outlet, High pressure pump discharge and RO
Reject
Range 0-7 Kg/cm2
Location Feed pump outlet/Filter outlet
Quantity 2 No
Location High pressure pump discharge and RO reject
Range 0-20 Kg/ cm2
Make Forbes Marshal/Waree or equivalent
B Flow Indicator Function-to measure flow rate at location
Quantity 3 No.
Location RO Feed, RO Product, Reject
Type Float type, panel mounted
Max operating temperature 40 degree centigrade
Measure points RO Feed, RO Product, Reject
Make Flow Max/ Eureka/ GF or equivalent
C Instrumentation & Control Sys-
tem
• High pressure switch and
low pressure switch
• Back wash system with
solenoid valve
• Electric control panel
with “A” meter, Voltmeter
indicators,
• Pressure control valves
• TDS & pH sensor
• Combo Dispensing system/
(android base remote
operated with facilities of
push button for coin and
provision of (ATW) smart
card System,
• push button should be
provided to stop water
dispensing any time.
381
• UPS for water dispensing in
absence of power
• flushing switch with solenoid
valves
• Micro base panel with GSM
Facility.
• System Should have
compatibility to remote
access, control and
monitoring
The control panel should have
facility for transfer of data using
GPRS facility to remote servers
provided by department if
necessary.(The unit should be
able to monitor all the sensors,
Flow sensors & Pump power
consumption(Energy meters)
and control pumps automatically
based on sensor & programmed
schedule).
NOTE:
1) Anti scalant use Only NSF 60 Approved Chemicals.
2) The piping and accessories used upto RO Membrane shall be CPVC.
3) Piping from Output of Pure Water to Coin Vending Machine and smart card shall be in Stainless Steel
SS 304.
4) All required electrical components shall be of relevant BIS code and IS standard.
5) Design of RO system must be done keeping in mind pollution norms of reject management and
accordingly RO recoveries must be optimized
6) All the components and fixtures used should be foodgrade and drinking water compatible.
7) All the components materials of works should conform to IS relevent codes/ drinking water BIS standards.
8) PÁªÀÄUÁjUÀ¼ÀÄ C¼ÀªÀr¸ÀĪÀ ¥ÀæªÀÄÄR CA±ÀUÀ¼ÁzÀ RO Membrane ªÀÄvÀÄÛ High pressure pump UÀ¼ÀÄ w½¹gÀĪÀ «²µÀ×
«ªÀgÀuÉAiÀÄAvÉ (Detailed Specification) EgÀĪÀ §UÉÎ PÁAiÀÄð¥Á®PÀ C©üAiÀÄAvÀgÀgÀÄ gÀªÀjAzÀ zÀÈrüÃPÀj¹PÉÆAqÀÄ C¼ÀªÀr¸ÀĪÀÅzÀÄ.
382
Annexure-K
3000 LPH (FRP) WATER PURIFICATION PLANTS - SPARE PARTS
383
Annexure-K/1
Supply installation commissiong with qulity test report of the whole of drinking water distribution/
dispensing plants/units of capacity 3000 LPH RO plant with product water as per BIS standards on
single phase power supply including Warranty,Operation & maintainance for 60 Months.
(As per Technical Specification).
TECHNICAL SPECIFICATION FOR 3000LPH(FRP) PURE DRINKING WATER PLANTS FOR REVERSE
OSMOSIS WITH CAPACITY FROM
Detail specification of the Product of 3000 LPH (FRP) - RO plant
1 Raw Water Storage Tank with Function–storage of raw water
low level and high level switch.
Type/ MOC Three Layered HDPE tanks made from virgin material of Food Grade
Quality, suitable for the purpose of Storage of drinking /portable wa-
ter. (where source fluctuation per-
sists or space constraint exists underground sump may be provided) .
Control Provision of Low Level and High Level Switch
Capacity 5000 Ltr tank
Make Sintex /Poly Plast/Frontier/Ganga or Equivalent
384
NO. of Cartridge housing As per plant requirement 2 Nos
Micron Rating 5 Micron & 1 Micron
Flow valocity 2.5 Mtr/Sec
MOC of cartridge PP
Make Zephyr/ Ametak-USA/MMP/Parker/Aventura/Hitech or equivalent
5 Sand filter Pressure sand Filter (PSF) to remove any Turbidity in water
Flow Rate As per plant requirement
Material of Housing FRP/Engineering grade plastic
Size As per plant requirement (21" x 62")
Media Pebbels, Gravel, Coarse Sand , Fine Sand & Antracite of Suitable
Quanitity as per plant Requirement
MOCof housing FRP
Make Pentair/Aventura/Hitech/Gopani/Advanced composite or equivalent
to these make
6 Anti scalant Dosing System Function- to inhibit scaling of hardness salt and Silica on RO
membranes
Pump 1 Set
Make KIDSPAE/Meltonroy/E-Dose/Injecta/Pentair/ Nuton/GE Thermax/
equivalent
Quantity 1 No.
Type Electronic/Diaphragm Type
Capacity 0-6LPH
Quantity of tank 1 No.
Capacity of Tank 100 ltr.
MOC of tank FRP/MSRL/HDPE
Make of Tank Any Standard Indian Make - ISI
7 High Pressure Pump & motor Function-to develop required pressure for Reverse Osmosis on RO
Membranes
Type Vertical Centrifugal Multistage 2.5 m3/hr flow 2-13 to 15 bar
pressure
a) Pump External jacket, suction chorome-nickel steel 1.4301 EN 10088 (ASI 304)
casing, delivery casing, impel-
ler, lower cover, Uppre cover,
Spacer sleeve.
pump shaft, plug chorome-nickel steel 1.4301 EN 10088 (ASI 303)
mechanical seal, Ceramic alumina/ carbon/EPDM
SO 3069-KU
385
Wear ring PTFE
O-ring NBR
MOC of pump casing SS316 / SS 304
b) motor IS 12615:2014, IEC 60034/30, Rating IE3 with IP 65 protection and
class F insultion
Capacity As per plant requirement
Pressure and power As per plant requirement
8 Pressure Vessel Function-to house RO Membranes under pressure
Item RO Module consisting of membrane housing with RO membrane
mounted on SS skid 40mm sq tube. 1.5 tank 304 nicker less then
6%
MOC FRP
Diameter As per plant requirement (4")
Length As per plant requirement (40")
Make Codeline/ Phoenix/Aventura/ Aqueous / protec/pentair/Maxima /
Advance or equivalent
9 Membrane Function-to remove dissolved salt, all kind of heavy metals from wa-
ter by Reverse Osmosis to produce permeate water having less dis-
solved salt/parameters confirming BIS 10500:2012 and reject water
having highly concentrated salt.
Type TFC, Polyamide
Size As per plant requirement
Average Flux <18 GFD
Make DOW Filmtec-USA, / Hydranautics / Burton/ Oltermare toray GE-
Wave cyber
Operating Water Temperature Ambient Temperature
10 Ultra Filteration Function-Blending RO outpit water with UF Permeate water to adjust
PH &TDS of output water.
Type Spirally wound PAN,PS,PES,PVDF
Size as per plant requirement(8 X 40inch) 3 No.s or (4 X 40inch) 12 No.s
Average Flux 25 LMH to 35LMH
Make DOW Filmtec-USA, / Hydranautics / Burton/ Oltermare toray
Operating Water Temperature Ambient Temperature
Membrane Housing Make Advanced composite aventura,Hitech,pentair or equivalent
MOC of housing FRP
11 UltraViolate System/ Ozone Function-to disinfect water, kill bacteria and micro-organisms
disinfection System
386
Capacity As per plant requirement
Make Alfa/ Phillips/ ACE Hygiene / Hitech or equivalent/kidspae
12 Cleaning in Place(CIP) System Function- use for chemical cleaning of RO Membranes over a
period of time
Quantity of tank 1 No.
Capacity of tank As per plant requirement
MOC to tank FRP/MSRL/PE
Make of tank Any Stadard Indian Make - ISI Brand
Micron Cartridge Filter 1 No.
Flow rate As per plant requirement
MOC FRP/Engineering grade plastic
No. of Cartridge housing As per plant requirement
Micron Rating 5 Micron
Flow velocity 2.5 Mtr/Sec
MOC of cartridge pp
13 Product Water Storage Tank Function–For storage of Product Water from R.O. Plant
with support stand,drain trey
Type/ MOC SS 304 thickness 0.8mm
Control Provision of Low Level and High Level Switch
Capacity 5000 ltrs – Shell thickness not less than 0.8mm
14 Pressure Pump for Dispencing Function - Create Pressure for Dispencing system
Horizontal - Centrifugal
MOC SS 304
Number 1 No's
Capacity As per plant Requirement
Pressure As per plant Requirement
Make Grundfos /Mahendra /Nuton/Kirloskar /Crompton greaves/ equiva-
lent
15 SS SKID Function-to mount RO system ,
SIZE as per requirement for 3000 LPH RO
Material SS 304 with standard thickness and quality 40mm 1 and half inches
387
Quantity 4 No
Location Pump outlet, Filter outlet, High pressure pump discharge and RO
Reject
Range 0-7 Kg/cm2
Location Feed pump outlet/Filter outlet
Quantity 2 No
Location High pressure pump discharge and RO reject
Range 0-20 Kg/ cm2
Make Forbes Marshal/Waree or equivalent
B Flow Indicator Function-to measure flow rate at location
Quantity 3 No.
Location RO Feed, RO Product, Reject
Type Float type, panel mounted
Max operating temperature 40 degree centigrade
Measure points RO Feed, RO Product, Reject
Make Flow Max/ Eureka/ GF or equivalent
C Instrumentation & Control
System
• High pressure switch and
low pressure switch
• Back wash system with
solenoid valve
• Electric control panel
with “A” meter, Voltmeter
indicators,
• Pressure control valves
• TDS & pH sensor
• Combo Dispensing system/
(android base remote
operated with facilities of
push button for coin and
provision of (ATW) smart
card System,
• push button should be
provided to stop water
dispensing any time.
• UPS for water dispensing in
absence of power
• flushing switch with solenoid
valves
• Micro base panel with GSM
Facility.
388
• System Should have
compatibility to remote
access, control and
monitoring
The control panel should have
facility for transfer of data using
GPRS facility to remote serv-
ers provided by department if
necessary.The unit should be
able to monitor all the sensors,
Flow sensors & Pump power
consumption(Energy meters)
and control pumps automatically
based on sensor & programmed
schedule
Note:
1) Anti scalant use Only NSF 60 Approved Chemicals.
2) The piping and accessories used upto RO Membrane shall be CPVC.
3) Piping from Output of Pure Water to Coin Vending Machine and smart card shall be in Stainless Steel
SS 304.
4) All required electrical components shall be of relevant BIS code and IS standard.
5) Design of RO system must be done keeping in mind pollution norms of reject management and
accordingly RO recoveries must be optimized
6) All the components and fixtures used should be foodgrade and drinking water compatible.
7) All the components materials of works should conform to IS relevent codes/ drinking water BIS standards.
8) PÁªÀÄUÁjUÀ¼ÀÄ C¼ÀªÀr¸ÀĪÀ ¥ÀæªÀÄÄR CA±ÀUÀ¼ÁzÀ RO Membrane ªÀÄvÀÄÛ High pressure pump UÀ¼ÀÄ w½¹gÀĪÀ «²µÀ×
«ªÀgÀuÉAiÀÄAvÉ (Detailed Specification) EgÀĪÀ §UÉÎ PÁAiÀÄð¥Á®PÀ C©üAiÀÄAvÀgÀgÀÄ gÀªÀjAzÀ zÀÈrüÃPÀj¹PÉÆAqÀÄ C¼ÀªÀr¸ÀĪÀÅzÀÄ.
389
C£ÀĪÉÆâvÀ ¥Àæw
n¥Ààt : UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å ¨É¼ÀUÁ« ªÀÈvÀÛzÀ 2019-20 ¸Á°£À C£ÀĪÉÆâvÀ zÀgÀ¥ÀnÖAiÀÄ ¥ÀæwUÉ
gÀÆ. 800-00 (JAlÄ £ÀÆgÀÄ gÀÆ¥Á¬ÄUÀ¼ÀÄ) UÀ¼ÀAvÉ ªÉƧ®UÀ£ÀÄß ¥ÀqÉzÀÄ ±Á¸À£À§zÀÞªÁzÀ CgÉ ¸ÀPÁðj
¸ÀA¸ÉÜUÀ¼ÀÄ ªÀÄvÀÄÛ C£ÀĪÉÆâvÀ ªÀiË®åªÀiÁ¥À£ÀPÁgÀjUÉ ºÁUÀÆ UÀÄwÛUÉzÁgÀjUÉ «vÀj¸À¯ÁUÀĪÀÅzÀÄ.
¸À»/-
C¢üÃPÀëPÀ C©üAiÀÄAvÀgÀgÀÄ,
UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å ªÀÈvÀÛ,
¨É¼ÀUÁ«
PÀÈvÀdÕvÉ
2019-20£Éà ¸Á°£À ¨É¼ÀUÁ« ªÀÈvÀÛzÀ zÀgÀ¥ÀnÖAiÀÄ PÀgÀqÀÄ ¥ÀæwAiÀÄ£ÀÄß vÀAiÀiÁj¸ÀĪÀ PÁAiÀÄðzÀ°è E¯ÁSÉAiÀÄ ªÀÄÄRå
C©üAiÀÄAvÀgÀgÀÄUÀ¼ÀÄ, G¥À¸À«ÄwAiÀÄ CzsÀåPÀëgÀÄ, ¸ÀzÀ¸ÀågÀÄUÀ¼ÀÄ ªÀÄvÀÄÛ vÁAwæPÀ vÀdÕgÀÄ ¤ÃqÀ¯ÁzÀ CªÀÄÆ®å ¸À®ºÉ ¸ÀÆZÀ£ÉUÀ¼ÀÄ
ªÀÄvÀÄÛ ¸ÀºÀPÁgÀªÀ£ÀÄß PÀÈvÀdÕvÁ ¥ÀƪÀðPÀªÁV ¸Àäj¹zÉ.
zÀgÀ¥ÀnÖAiÀÄ PÀgÀqÀÄ ¥ÀæwAiÀÄ£ÀÄß vÀAiÀiÁj¸ÀĪÀ°è, ¥Àæ¸ÀÄÛvÀ ªÀiÁgÀÄPÀmÉÖAiÀÄ zÀgÀUÀ¼ÀÄ EvÁå¢ «ªÀgÀuÉUÀ¼À£ÀÄß ¤Ãr ¸ÀºÀPÀj¹zÀ
vÀAiÀiÁgÀPÀgÀÄ, ¸ÀgÀ§gÁdÄzÁgÀgÀÄ, UÀÄwÛUÉzÁgÀgÀÄ ºÁUÀÆ E¤ßvÀgÉ SÁ¸ÀV ¸ÀA¸ÉÜUÀ¼À£ÀÄß PÀÈvÀdÕvÁ¥ÀƪÀðPÀªÁV ¸Àäj¸À¯ÁVzÉ.
2019-20£Éà PÀgÀqÀÄ zÀgÀ¥ÀnÖAiÀÄ£ÀÄß vÀAiÀiÁj¸ÀĪÀ°è ¸ÀºÀPÀj¹zÀ E¯ÁSÉAiÀÄ J¯Áè C¢üPÁj ºÁUÀÆ ¹§âA¢ ªÀUÀðzÀªÀjUÉ
PÀÈvÀdÕvÉUÀ¼À£ÀÄß ¸À°è¹zÉ.
¸À»/-
C¢üÃPÀëPÀ C©üAiÀÄAvÀgÀgÀÄ,
UÁæ«ÄÃt PÀÄrAiÀÄĪÀ ¤ÃgÀÄ ªÀÄvÀÄÛ £ÉʪÀÄð®å ªÀÈvÀÛ,
¨É¼ÀUÁ«
390
391