Professional Documents
Culture Documents
TE-Jintexyme OEM SPL - JX131B-2-1
TE-Jintexyme OEM SPL - JX131B-2-1
2-1
APPLICATION:
Discontinuous application
Drain the bath after the hydrogen peroxide bleach Hot wash off for 10 - 15min at
85 - 90°C, drain Neutralisation for 10min at 40 - 60°C, pH 5.5 – 6,
After the neutralisation in the same bath add Jintexyme OEM spl and treat for
another 10 - 15minutes. Test for the residual hydrogen peroxide and go straight for
dyeing in the same bath.
Continuous application
Treatment with Jintexyme OEM spl is rarely required post pad-steam bleach. But in
cases where washing efficiency is poor after the Pad-steam bleaching and in case of
under-liquor bleaching application, Jintexyme OEM spl can be added in the last
wash box after neutralization of the alkali. The dosages will be based on the level of
leftover peroxide.
2-2