Professional Documents
Culture Documents
EN Safety Data Sheet 57-202-515
EN Safety Data Sheet 57-202-515
EN Safety Data Sheet 57-202-515
Component list
Resin Component 5-MINUTE EPOXY RESIN
Hardener Component 5-MINUTE EPOXY HARDENER
Kit SDS Revision Date 07/08/2015
GHS Pictogram s:
Hazards not otherwise classified that have been identified during the classification process:
Sk in: Can cause sk in irritation; itching, redness, rashes, hives, burning, and swelling. Allergic reactions are
possible.
May cause sk in sensitization, an allergic reaction, which becom es evident on reex posure to this
m aterial.
Inhalation: Respiratory tract irritant. High concentration m ay cause dizziness, headache, and anesthetic effects.
May cause respiratory sensitization with asthm a-lik e sym ptom s in susceptible individuals.
Ingestion: Causes irritation, a burning sensation of the m outh, throat and gastrointestinal tract and abdom inal
pain.
Chronic Health Effects: Prolonged sk in contact m ay lead to burning associated with severe reddening, swelling, and possible
tissue destruction.
Signs/Sym ptom s: Overex posure can cause headaches, dizziness, nausea, and vom iting.
Target Organs: Eyes. Sk in. Respiratory system . Digestive system .
Aggravation of Pre-Ex isting Individuals with pre-ex isting sk in disorders, asthm a, allergies or k nown sensitization m ay be m ore
Conditions: susceptible to the effects of this product.
Mix tures:
Eye Contact: Im m ediately flush eyes with plenty of water for at least 15 to 20 m inutes. Ensure adequate flushing of
the eyes by separating the eyelids with fingers. Get im m ediate m edical attention.
Sk in Contact: Im m ediately wash sk in with plenty of soap and water for 15 to 20 m inutes, while rem oving
contam inated clothing and shoes.
Get m edical attention if irritation develops or persists.
Inhalation: If inhaled, rem ove to fresh air. If not breathing, give artificial respiration or give ox ygen by trained
personnel. Seek im m ediate m edical attention.
Ingestion: If swallowed, do NO T induce vom iting. Call a physician or poison control center im m ediately. Never give
anything by m outh to an unconscious person.
Suitable Ex tinguishing Media: Use carbon diox ide (CO2) or dry chem ical when fighting fires involving this m aterial.
Unusual Fire Hazards: Sealed containers at elevated tem peratures m ay rupture ex plosively and spread fire due to
polym erization. Heating above 300 deg F in the presence of air m ay cause slow ox idative
decom position and above 500 deg F m ay cause polym erization.
Protective Equipm ent: As in any fire, wear Self-Contained Breathing Apparatus (SCBA), MSHA/NIO SH (approved or equivalent)
and full protective gear.
Fire Fighting Instructions: Evacuate area of unprotected personnel. Use cold water spray to cool fire ex posed containers to
m inim ize risk of rupture. Do not enter confined fire space without full protective gear. If possible,
contain fire run-off water.
Environm ental Precautions: Avoid runoff into storm sewers, ditches, and waterways.
Spill Cleanup Measures: Absorb spill with inert m aterial (e,g., dry sand or earth), then place in a chem ical waste container.
Provide ventilation. Clean up spills im m ediately observing precautions in the protective equipm ent
section. After rem oval, flush spill area with soap and water to rem ove trace residue.
Avoid personal contact and breathing vapors or m ists. Ventilate area. Use proper personal protective
equipm ent as listed in Section 8.
Special Handling Procedures: Provide appropriate ventilation/respiratory protection against decom position products (see Section 10)
during welding/flam e cutting operations and to protect against dust during sanding/grinding of cured
product.
Storage: Store in a cool, dry, well ventilated area away from sources of heat and incom patible m aterials. Keep
container tightly closed when not in use.
Engineering Controls: Use appropriate engineering control such as process enclosures, local ex haust ventilation, or other
engineering controls to control airborne levels below recom m ended ex posure lim its. Good general
ventilation should be sufficient to control airborne levels. Where such system s are not effective wear
suitable personal protective equipm ent, which perform s satisfactorily and m eets O SHA or other
recognized standards. Consult with local procedures for selection, training, inspection and m aintenance
of the personal protective equipm ent.
Eye/Face Protection: Wear appropriate protective glasses or splash goggles as described by 29 CFR 1910.133, O SHA eye
and face protection regulation, or the European standard EN 166.
Sk in Protection Description: Wear appropriate protective gloves and other protective apparel to prevent sk in contact. Consult
m anufacturer's data for perm eability data.
Nitrile gloves are recom m ended.
Respiratory Protection: A NIO SH approved air-purifying respirator with an organic vapor cartridge or canister m ay be
perm issible under certain circum stances where airborne concentrations are ex pected to ex ceed
ex posure lim its. Protection provided by air purifying respirators is lim ited. Use a positive pressure air
supplied respirator if there is any potential for an uncontrolled release, ex posure levels are not k nown,
or any other circum stances where air purifying respirators m ay not provide adequate protection.
Other Protective: Facilities storing or utilizing this m aterial should be equipped with an eyewash and a deluge shower
safety station.
Notes : Only established PEL and TLV values for the ingredients are listed.
Color: Clear
Solubility: negligible.
pH: Neutral.
VO C Content: 0 g/L
Chem ical Stability: Stable under norm al tem peratures and pressures.
Conditions To Avoid:
Conditions to Avoid: Ex trem e heat, spark s, and open flam e. Incom patible m aterials, ox idizers and ox idizing conditions.
Heating resin above 300 F in the presence of air m ay cause slow ox idative decom position.
Incom patible Materials:
Incom patible Materials: Strong Lewis or m ineral acids, strong ox idizing agents, strong m ineral and organic bases (especially
prim ary and secondary aliphatic am ines).
Eye: Adm inistration into the eye - Rabbit Standard Draize test: 100 m g [Mild]
Adm inistration into the eye - Rabbit Standard Draize test: 20 m g/24H [Moderate]
Adm inistration into the eye - Rabbit Standard Draize test: 5 m g/24H [Severe] (RTECS)
Sk in: Adm inistration onto the sk in - Rabbit LD50 - Lethal dose, 50 percent k ill: >20 m L/k g [Details of tox ic
effects not reported other than lethal dose value]
Adm inistration onto the sk in - Rat LD50 - Lethal dose, 50 percent k ill: >1200 m g/k g [Details of tox ic
effects not reported other than lethal dose value] (RTECS)
Ingestion: Oral - Rat LD50 - Lethal dose, 50 percent k ill: 10700 uL/k g [Details of tox ic effects not reported other
than lethal dose value]
Oral - Rat LD50 - Lethal dose, 50 percent k ill: 13600 m g/k g [Behavioral - Som nolence (general
depressed activity) Lungs, Thorax , or Respiration - Dyspnea Nutritional and Gross Metabolic - Weight
loss or decreased weight gain]
Oral - Rat LD50 - Lethal dose, 50 percent k ill: 13.6 gm /k g [Details of tox ic effects not reported other
than lethal dose value]
Oral - Rat LD50 - Lethal dose, 50 percent k ill: 11.4 gm /k g [Details of tox ic effects not reported other
than lethal dose value]
Oral - Rat LD50 - Lethal dose, 50 percent k ill: 30 gm /k g [Behavioral - Som nolence (general depressed
activity) Lungs, Thorax , or Respiration - Dyspnea Nutritional and Gross Metabolic - Weight loss or
decreased weight gain]
Oral - Rat LD50 - Lethal dose, 50 percent k ill: 30 gm /k g [Details of tox ic effects not reported other
than lethal dose value]
Oral - Rat LD50 - Lethal dose, 50 percent k ill: >1 gm /k g [Details of tox ic effects not reported other
than lethal dose value]
Oral - Rat LD50 - Lethal dose, 50 percent k ill: 11400 m g/k g [Behavioral - Som nolence (general
depressed activity) Lungs, Thorax , or Respiration - Dyspnea Nutritional and Gross Metabolic (RTECS)
Environm ental Fate: No environm ental inform ation found for this product.
Description of waste:
Waste Disposal: Consult with the US EPA Guidelines listed in 40 CFR Part 261.3 for the classifications of hazardous
waste prior to disposal. Furtherm ore, consult with your state and local waste requirem ents or guidelines,
if applicable, to ensure com pliance. Arrange disposal in accordance to the EPA and/or state and local
guidelines.
Safety, health and environm ental regulations specific for the product:
W HMIS Pictogram s:
HMIS Ratings:
Disclaim er: The inform ation in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. ITW
Polym ers Adhesives, NA, MAKES NO W ARRANTIES, EXPRESSED O R IMPLIED, INCLUDING, BUT NO T
LIMITED TO, ANY IMPLIED W ARRANTY O F MERCHANTABILITY O R FITNESS FO R A PARTICULAR PURPO SE
O R CO URSE O F PERFO RMANCE O R USAGE O F TRADE. User is responsible for determ ining whether the
ITW Polym ers Adhesives, NA product is fit for a particular purpose and suitable for user's m ethod of
use or application. Given the variety of factors that can affect the use and application of a ITW
Polym ers Adhesives, NA product, som e of which are uniquely within the user's k nowledge and control, it
is essential that the user evaluate the ITW Polym ers Adhesives, NA product to determ ine whether it is
fit for a particular purpose and suitable for user's m ethod of use or application. ITW Polym ers
Adhesives, NA provides inform ation in electronic form as a service to its custom ers. Due to the rem ote
possibility that electronic transfer m ay have resulted in errors, om issions or alterations in this
inform ation, ITW Polym ers Adhesives, NA m ak es no representations as to its com pleteness or
accuracy. In addition, inform ation obtained from a database m ay not be as current as the inform ation
in the MSDS available directly from ITW Polym ers Adhesives, NA
GHS Pictogram s:
Hazards not otherwise classified that have been identified during the classification process:
Sk in: Causes severe sk in irritation. May cause perm anent sk in dam age. Allergic reactions are possible.
May cause sk in sensitization, an allergic reaction, which becom es evident on reex posure to this
m aterial.
Inhalation: Vapor or m ist m ay cause severe respiratory system irritation. May cause respiratory sensitization with
asthm a-lik e sym ptom s in susceptible individuals.
Ingestion: Causes irritation, a burning sensation of the m outh, throat and gastrointestinal tract and abdom inal
pain.
Chronic Health Effects: Prolonged sk in contact m ay lead to burning associated with severe reddening, swelling, and possible
tissue destruction.
Signs/Sym ptom s: Overex posure m ay cause eye watering or discom fort, redness and swelling.
Aggravation of Pre-Ex isting Individuals with pre-ex isting sk in disorders, asthm a, allergies or k nown sensitization m ay be m ore
Conditions: susceptible to the effects of this product.
Mix tures:
Eye Contact: Im m ediately flush eyes with plenty of water for at least 15 to 20 m inutes. Ensure adequate flushing of
the eyes by separating the eyelids with fingers. Get im m ediate m edical attention.
Sk in Contact: Im m ediately wash sk in with plenty of soap and water for 15 to 20 m inutes, while rem oving
contam inated clothing and shoes.
Get m edical attention if irritation develops or persists.
Inhalation: If inhaled, rem ove to fresh air. If not breathing, give artificial respiration or give ox ygen by trained
personnel. Seek im m ediate m edical attention.
Ingestion: If swallowed, do NO T induce vom iting. Call a physician or poison control center im m ediately. Never give
anything by m outh to an unconscious person.
Suitable Ex tinguishing Media: Use carbon diox ide (CO2) or dry chem ical when fighting fires involving this m aterial.
Hazardous Com bustion Ox ides of carbon (carbon diox ide and m onox ide). Nitrogen ox ides (NOx )
Byproducts:
Protective Equipm ent: As in any fire, wear Self-Contained Breathing Apparatus (SCBA), MSHA/NIO SH (approved or equivalent)
and full protective gear.
Fire Fighting Instructions: Evacuate area of unprotected personnel. Use cold water spray to cool fire ex posed containers to
m inim ize risk of rupture. Do not enter confined fire space without full protective gear. If possible,
contain fire run-off water.
Personnel Precautions: Evacuate area and k eep unnecessary and unprotected personnel from entering the spill area.
Environm ental Precautions: Avoid runoff into storm sewers, ditches, and waterways.
Spill Cleanup Measures: Absorb spill with inert m aterial (e,g., dry sand or earth), then place in a chem ical waste container.
Provide ventilation. Clean up spills im m ediately observing precautions in the protective equipm ent
section. After rem oval, flush spill area with soap and water to rem ove trace residue.
Avoid personal contact and breathing vapors or m ists. Ventilate area. Use proper personal protective
equipm ent as listed in Section 8.
Handling: Use with adequate ventilation. Avoid breathing vapor, aerosol or m ist.
Special Handling Procedures: Provide appropriate ventilation/respiratory protection against decom position products (see Section 10)
during welding/flam e cutting operations and to protect against dust during sanding/grinding of cured
product.
Storage: Store in a cool, dry, well ventilated area away from sources of heat and incom patible m aterials. Keep
container tightly closed when not in use. Do not store in reactive m etal containers. Keep away from
acids, ox idizers.
Engineering Controls: Use appropriate engineering control such as process enclosures, local ex haust ventilation, or other
engineering controls to control airborne levels below recom m ended ex posure lim its. Good general
ventilation should be sufficient to control airborne levels. Where such system s are not effective wear
suitable personal protective equipm ent, which perform s satisfactorily and m eets O SHA or other
recognized standards. Consult with local procedures for selection, training, inspection and m aintenance
of the personal protective equipm ent.
Eye/Face Protection: Wear appropriate protective glasses or splash goggles as described by 29 CFR 1910.133, O SHA eye
and face protection regulation, or the European standard EN 166.
Sk in Protection Description: Wear appropriate protective gloves and other protective apparel to prevent sk in contact. Consult
m anufacturer's data for perm eability data.
Respiratory Protection: A NIO SH approved air-purifying respirator with an organic vapor cartridge or canister m ay be
perm issible under certain circum stances where airborne concentrations are ex pected to ex ceed
ex posure lim its. Protection provided by air purifying respirators is lim ited. Use a positive pressure air
supplied respirator if there is any potential for an uncontrolled release, ex posure levels are not k nown,
or any other circum stances where air purifying respirators m ay not provide adequate protection.
Other Protective: Facilities storing or utilizing this m aterial should be equipped with an eyewash and a deluge shower
safety station.
Notes : Only established PEL and TLV values for the ingredients are listed.
Odor: Mercaptan.
Solubility: negligible.
Percent Volatile: 0
VO C Content: 0 g/L
Chem ical Stability: Stable under norm al tem peratures and pressures.
Conditions To Avoid:
Conditions to Avoid: Ex trem e heat, spark s, and open flam e. Incom patible m aterials, ox idizers and ox idizing conditions.
Incom patible Materials: Ox idizing agents. Strong acids and alk alis.
Ecotox icity:
Ecotox icity: No ecotox icity data was found for the product.
Environm ental Fate: No environm ental inform ation found for this product.
Description of waste:
Waste Disposal: Consult with the US EPA Guidelines listed in 40 CFR Part 261.3 for the classifications of hazardous
waste prior to disposal. Furtherm ore, consult with your state and local waste requirem ents or guidelines,
if applicable, to ensure com pliance. Arrange disposal in accordance to the EPA and/or state and local
guidelines.
Safety, health and environm ental regulations specific for the product:
W HMIS Pictogram s:
HMIS Ratings:
Disclaim er: The inform ation in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. ITW
Polym ers Adhesives, NA, MAKES NO W ARRANTIES, EXPRESSED O R IMPLIED, INCLUDING, BUT NO T
LIMITED TO, ANY IMPLIED W ARRANTY O F MERCHANTABILITY O R FITNESS FO R A PARTICULAR PURPO SE
O R CO URSE O F PERFO RMANCE O R USAGE O F TRADE. User is responsible for determ ining whether the
ITW Polym ers Adhesives, NA product is fit for a particular purpose and suitable for user's m ethod of
use or application. Given the variety of factors that can affect the use and application of a ITW
Polym ers Adhesives, NA product, som e of which are uniquely within the user's k nowledge and control, it
is essential that the user evaluate the ITW Polym ers Adhesives, NA product to determ ine whether it is
fit for a particular purpose and suitable for user's m ethod of use or application. ITW Polym ers
Adhesives, NA provides inform ation in electronic form as a service to its custom ers. Due to the rem ote
possibility that electronic transfer m ay have resulted in errors, om issions or alterations in this
inform ation, ITW Polym ers Adhesives, NA m ak es no representations as to its com pleteness or
accuracy. In addition, inform ation obtained from a database m ay not be as current as the inform ation
in the MSDS available directly from ITW Polym ers Adhesives, NA