Professional Documents
Culture Documents
Statement 4 Clamps + Rail Along The Long Side
Statement 4 Clamps + Rail Along The Long Side
Dear customer,
Other than the installation types stated in the Jinko installation manual, the modules
JKM***N-72HL4-BDV, JKM***M-72HL4-BDVP and JKM***N-78HL4-BDV may be
mounted using the following installation type, in addition to those outlined in the Jinko
installation manual:
The module is mounted using a specific installation method which involves the use of
two clamps on each side of the long frame of the module, with two rails located
underneath the module's long-side frame providing full support along its entire
length.
Each one pair of clamps is used to fix one rail with the module frame. The dimensional
requirements of the clamp shall follow the clause 2.3.2 in the Jinko installation manual.
Page 1 from 2
Under the above-stated installation, the modules have the load resistance capability of:
Your sincerely,
Page 2 from 2