Professional Documents
Culture Documents
Festool Tks80 Precommissioning Manual
Festool Tks80 Precommissioning Manual
WARNING
The SawStop AIM technology only works with a protective
earth connection and an earthed power source – Risk of injury
›› Make sure that power is not supplied via the SYS-PST 1500
or a transformer, for example.
WARNING
SawStop AIM technology is triggered
›› Do not touch the saw blade when it is coming to a stop. The SawStop AIM technology is still active will be triggered
upon contact.
3. Checking conductivity
The conductivity of materials can be tested in advance to prevent accidental triggers.
1. Press the green main switch
→→ is ready for operation. Function monitoring
2. Hold the material against the saw blade:
› Green LED is constantly lit, red LED is off
→→ Material is not conductive.
› Green LED is constantly lit, red LED flashes quickly
→→ Material is conductive. Work in bypass mode.
WARNING WARNING
Noise generated when the SawStop AIM technology Risk of injury from ejected parts
is triggered – Risk of accidents ›› The cartridge AND the saw blade must be replaced.
›› Wear hearing protection. Never use warped saw blades or saw blades with
cracked or broken teeth.