Professional Documents
Culture Documents
CHEM104 Guide
CHEM104 Guide
1 Alcohols react using both acid and base catalysis: please elaborate.
Choose one answer. a. Acids catalyze hydrolysis and ether formation from alcohols. Bases polarize the OH bond, even to the point of forming an
alkoxide salt.
b. Acids are used as catalysts in the Williamson ether synthesis and for hydrolysis of ethers. Bases dissolve in ethers for use
in other reactions.
c. Acids and bases will react in alcohols to form salts that are useful for ether synthesis.
Choose one answer. a. The two Williamson reagents normally used in combination with heat and light.
d. An alkoxide salt of an alcohol reacted with the alcohol it was made from.
Choose one answer. a. are reactive because of ring string (3 membered ring).
Choose one answer. a. With base and water to give two alcohols.
b. With acid and another alcohol to give transetherification- another ether and a different alcohol from the starting one.
c. With ethyl bromide to give an ethyl ether and a new alkyl bromide.
Choose one answer. a. they can react with themselves in the presence of heat and acid to give ethers.
c. they have higher boiling points than hydrocarbons or ethers with the same number of carbon atoms.
6 Ether alcohols (molecules with both an ether and a beta alcohol) can best be made by:
Choose one answer. a. acid catalyzed reaction of an epoxide and an alcohol with maybe a little heat.
c. acid catalyzed addition of water to a vinyl ether (ether with a double bond next to the oxygen).
Choose one answer. a. reaction of two alcohols with base and heat catalysis.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 1/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
b. Conversion of an alcohol with base catalysis and heat, distilling off the ether as it forms.
c. alcohols.
11 Why are thiols and their anionic conjugate bases more reactive than their oxygen analogs?
Choose one answer. a. They aren't really, since alcohols and acids are more reactive.
b. Because the sulfur is big, and the bigger an atom is with unpaired outer shell electrons, the more reactive it is.
d. Because it's smaller than oxygen and has more localized outer shell electrons which are more nucleophilic.
12 Why does sulfur oxidize so easily to sulfoxides, sulfones, sulfonic and sulfuric acid?
Choose one answer. a. No one knows, it's one of the mysterious of the universe.
b. Oxygen is more electron rich, and wants to share electrons with any atom it can bind to.
c. Oxidation is just "burning," and we know that sulfur burns well (high sulfur coal?).
d. Sulfur just loves to share its outer shell electrons, and the more sharing it does, the happier it is.
Choose one answer. a. Yes, except when oxygens are attached to the sulfur, then the oxygens react first.
b. Yes, except when carbons are attached to the sulfur, then substitution occurs at the carbon.
d. Pretty much, yes, even when oxygens are attached to the sulfur.
14 The Swern oxidation involves using DMSO (remember this great solvent?) to do what?
Choose one answer. a. React with oxygen to form dimethylsulfone, the di-oxygen derivative of sulfur.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 2/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
Choose one answer. a. There is none; they're the same and they both have SH bonds.
b. A thiol is the sulfur analog of an ether; a mercaptan is like an alcohol (SH bond).
16 It's possible to make a polymer from a conjugated double bond diene. Pick the right diene below and the polymer that it forms.
Choose one answer. a. 1, 5-hexadiene (gives a polymer with four carbon backbone and two-carbon pendent group).
b. 2-methyl-1, 3-butadiene (also called isoprene), gives polyisoprene like the natural rubber used in tires.
c. 2, 4-hexadiene (gives a polymer with four carbon backbone and two pendent methyl groups).
Choose one answer. a. some kind of diene with pendent ester groups reacting with some kind of alkene to give a substituted cyclohexene.
18 Dienes can react with bromine (the diatomic molecule, that is) to give a product; which combination below is correct?
Choose one answer. a. 1, 3-butadiene plus 1 equivalent of bromine gas to give mostly 1, 3-dibromo-3-butene.
19 Dienes will readily react with chlorine, especially under the right conditions: which is the best answer below?
Choose one answer. a. 2, 4-hexadiene with chlorine gas under a strong uv light to give the dichlorohexene.
c. 1equivalent of frozen chlorine (solid) added to cold 1, 4-cyclohexadiene to give 2, 5-dichloro-1, 4-cyclohexadiene..
d. chlorine gas dissolved in cold water with 1, 3-butadiene added dropwise to give dichlorobutanediols.
20 Conjugated double bonds in dienes often lead to an especially stable intermediate during reactions; pick a good explanation below for why.
Choose one answer. a. Any reactive species whether radical, cationic or anionic will give a resonance stabilized "allylic" intermediate.
b. The first step in the reaction of conjugated double bonds is the same as for isolated double bonds, and the radical,
cation or anion formed will be stabilized by the alkyl substituent.
c. The intermediate will have both the 1- and the 4-carbons of the starting conjugated double bonds attached to the
attacking electrophile.
d. Actually, the reactions are so fast that no intermediate is expected no matter what electrophile is involved.
21 Reaction of 1, 3-butadiene with maleic anhydride gives a single product that is:
b. 3-(3-butenyl)succinic anhydride.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 3/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
22 You unexpectedly are given hundreds of tons of 1, 3-cyclohexadiene. You decide to convert it to benzene by:
Choose one answer. a. first reacting with chlorine gas and UV light followed by KOH in alcohol.
b. treating with NaOH in water to make the alcohol followed by distillation from concentrated sulfuric acid.
Choose one answer. a. Starting with a linear alkane with at least four carbons, first halogenate once and dehydrohalogenate to an alkene; do
radical allylic halogenation to give an allyl halide; then dehydrohalogenate again with KOH in alcohol to the diene.
b. Take any 4-carbon alkene, add bromine across the double bond and dehydrohalogenate twice with KOH in alcohol.
c. React a four carbon (at least) linear alkane with two equivalents of chlorine under UV light, then dehydrohalogenate
twice with KOH in alcohol.
d. First chlorinate and dehydrochlorinate butane, then deprotonate with butyl lithium or concentrated KOH in alcohol, and
pour the mixture into dilute acid to neutralize the base.
25 You decide to make 1, 3-cyclopentadiene from cyclopentene you happen to have by:
Choose one answer. a. first reacting with one equivalent of chlorine gas and uv light followed by treating with KOH in alcohol.
b. treating with concentrated NaOH in water followed by dehydration with concentrated sulfuric acid.
c. adding one equivalent of bromine and treating the product with two equivalents of KOH in alcohol.
d. reacting it with HOCl (bleach) to give the halohydrin, and dehydrating with concentrated sulfuric acid.
26 Please name the diene that is a cyclic six-carbon ring with two double bonds (conjugated).
b. 1, 4-cyclohexadiene.
c. 1, 5-cyclohexadiene
d. 1, 3-cyclohexadiene
27 Huckel was one of the first scientists to describe aromaticity, and he used which simple rule?
Choose one answer. a. Benzene, naphthalene and higher analogs with 4n + 2 electrons in the conjugated pi-bonds.
b. Furan which has four carbons and one sp2 hybridized oxygen totalling five atoms and 6 pi or non-bonded electrons.
c. Cycloheptatriene possessing 7 carbon atoms with three conjugated pi-bonds containing 6 pi electrons.
d. Cyclopentadiene cation with 5 carbons, two pi-bonds and one sp2 carbon containing 0 electrons in a p-orbital.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 4/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
29 Naphthalene (10 carbons with two fused benzene rings) is aromatic according to Huckel because:
Choose one answer. a. there is a continuous array of p-orbitals from pi-bonds around the outside of the fused rings AND there are 4n + 2
electrons in them (10).
c. 10 carbons are an even number and there are 5 double bonds with 8 pairs of electrons in them.
30 Cyclopropene has three carbons in a ring with one double bond: is it aromatic?
Choose one answer. a. No because there's only 2 electrons in the pi-bond (2 p-orbitals).
Choose one answer. a. Sigma bonds transmit electronic effects by electronic polarization effects.
b. Resonance causes spreading of the electronic effects of various substituents throughout the ring through sigma bonds.
c. Resonance of the electron donating or withdrawing affects of a substituent can stabilize or destabilize charge at ortho
and para positions.
d. Through space interactions of a substituent with sigma bonds in the ring affect individual carbon electron densities.
Choose one answer. a. A more even distribution of pi electrons occurs in aromatic molecules.
b. Rapid resonance of pi electrons spreads the electron density over more atoms.
c. The molecular orbitals that form from a conjugated cyclic array of p-orbitalswith just the right number of electrons in
them are substantially lower in energy than for non-conjugated systems.
d. There is no good explanation that we know of, it's just a fact of nature.
33 Because of their unique resonance stabilization and molecular structures, aromatic molecules possess unique properties: select the best description below.
Choose one answer. a. They are more stable and less reactive then non-aromatic molecules.
b. They react with unique mechanisms such as electrophilic aromatic substitution and nucleophilic aromatic substitution.
c. They do not undergo simple addition reactions that occur with simple alkanes.
Choose one answer. a. It has six carbons like cyclohexane and therefore has both chair and boat confirmations.
c. The six carbons in the ring all occupy the same plane with pi bond orbitals above and below that plane.
d. Benzene has carbons connected by six sigma and three pi bonds, with the pi bonds being significantly shorter than the
ordinary sigma bonds in the benzene ring.
Choose one answer. a. Their orbitals can be hybridized in such a way as to participate in the cyclic array of p-orbitals needed for 4n+2
electrons.
c. They modify the behavior of the ring in strange and mysterious ways.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 5/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
d. They decrease the reactivity of the rings in which they are located.
36 Substituents on aromatic ring can affect each other: Pick the answer that best illustrates this.
Choose one answer. a. Meta-nitrobenzoic acid is more acidic than the para-nitro isomer because the nitro is closer to the acid group.
b. 3, 4-Dinitrobenzoic acid is readily made by nitration of benzoic acid with excess fuming nitric acid.
c. The order of acidity of substituted benzoic acid increases for para-substituents nitro, chloro, hydroxy.
d. The more electron withdrawing groups on the ring, the more acidic is benzoic acid; i.e., trichloro more than dichloro
more than monochlorobenzoic acid.
37 Phenol is an aromatic alcohol and differs from aliphatic alcohols in what ways?
Choose one answer. a. The OH group is less acidic and less easily exchanged with deuterium because of resonance.
b. The OH Group has an enormous effect on reactivity and aliphatic alcohols but not in phenols.
c. Reactions on carbons alpha or beta to the OH in phenols is strictly controlled by electronegativity affects.
d. Because of resonance stabilization of intermediates, phenols are more easily brominated and nitrated.
38 The reactivities of substituents on aromatic rings are affected by the aromatic ring as illustrated by which of the following answers?
Choose one answer. a. The methyl group of toluene readily undergoes free radical reaction and oxidation.
Choose one answer. a. an aromatic ring is inherently electron withdrawing, pulling electrons away from the O-H bond.
b. resonance stabilization of the ring bond to oxygen makes the bond between O and H weaker.
c. resonance stabilization of the conjugate base (phenolate anion) is greater than is stabilization of the cyclohexanol
alkoxide by the attached ring.
d. alkyl carbons are electron donating compared to an aromatic ring, baking the cyclohexanol OH bond stronger than that
of phenol.
40 Compare the reactivity of the oxygen to acetylation with acetic anhydride for phenol versus cyclohexanol by picking the best answer below.
Choose one answer. a. Electron donation by the cyclohexane ring increases nucleophilic attack by the oxygen of cyclohexanol versus phenol.
b. Resonance is greater for the phenol acetyl oxonium intermediate than for the cyclohexanol analog.
c. Base catalyzed formation of the phenolate is faster than for cyclohexanol due to resonance stabilization, and the anion
formed is more reactive.
41 You find to your surprise that the reaction of phenol with acetic anhydride and aluminum trichloride gives a mixture of two disubstituted products. Pick the
best reason for why.
Choose one answer. a. The OH oxygen reacts twice to give the bisester derivative.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 6/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
Choose one answer. a. all of the below.
b. electrons, and those are almost always relatively "available" ones in pi-orbitals.
d. a one-step reaction involving loss of leaving group at the same time the attacking group makes a new bond.
43 All EAS reactions involve a "tetrahedral" or Td intermediate. Which of the following is true of this statement?
Choose one answer. a. Can't happen with an aromatic ring carbon which by definition is sp2 or trigonal planar.
c. No, the leaving group leaves at the same time the attacking group forms a bond.
44 The best way to describe the "arrow" showing the mechanism of EAS is:
Choose one answer. a. it goes from the attacking atom (electrophile) to the carbon being attacked.
b. it goes from the attacking atom to the new bond being formed.
c. it goes from the electron pair in the pi-bond on the ring to the new sigma bond being formed.
d. it involves a half-head arrow from the attacking species and a half-head arrow from the pi-bond to the new sigma bond
to be formed.
Choose one answer. a. between any aromatic molecule and an appropriate electrophile, assuming aromaticity follows the 2(n + 2) rule.
46 EAS with chlorine gas bubbled into chlorobenzene containing aluminum trichloride would:
Choose one answer. a. pure trinitrophenol (also called "picric acid" which has a really low pKa for a phenolic compound).
c. para-nitrophenol since the OH group on an aromatic ring is activating and ortho-para directing.
d. a complex mixture of ortho- and para-substituted phenols with di- and trinitro derivatives predominating.
48 48. Friedel-Crafts acylation of ortho-nitrotoluene with acetyl chloride and aluminum trichloride gives:
Choose one answer. a. a mixture of acetophenones with the nitro group always ortho or para to the carbonyl.
49 49. Common explosives developed by Alfred Nobel use trinitro-aromatics such as:
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 7/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
Choose one answer. a. trinitrophenol made by low-temperature nitration of phenol.
c. 2, 5-dinitro-1, 4-dichlorobenzene made by chloronating the dinitrobenzene with ferric chloride as catalyst.
50 50. Friedel-Crafts alkylation of benzene with 1-chloro-2-methylpropane and aluminum trichloride gives:
d. paramethylpropylbenzene.
51 51. You decide to make meta-nitrophenol by doing which of the following steps?
Choose one answer. a. Reacting phenol with fuming nitric acid in an ice bath.
b. Reacting benzene with fuming nitric acid, then reacting the product with chlorine/iron, and last heating with NaOH in
water.
c. Reacting benzene with chlorine/iron, then reacting the product with nitric acid followed by NaOH in water.
d. Reacting benzene with fuming nitric acid to make trinitrobenzene and then with NaOH in water.
52 52. You acquire a mixture of meta- and para-fluoronitrobenzene and want to react it with a nucleophile. What should you do first?
Choose one answer. a. You pick sodium methoxide because it's more reactive than a sulfur anion, sodium hydrosulfide (NaSH).
b. You choose NaCl in ethanol since that's a pretty good nucleophile system.
c. You decide on sodium methoxide dissolved in water to make the para-nitrophenyl methyl ether.
d. You mix NaSH with ethanol and then add the aromatic molecule to make the aryl sulfide.
53 53. You want to make para-hydroxybenzoic acid, so you decide to do both EAS and NAS as follows:
Choose one answer. a. You react para-chlorotoulene with hot KMnO4, isolate the product and then react it with hot methanol and HCl catalyst.
The product of this you react with neat NaOH in the melt.
b. You react toluene with concentrated NaOH in water at reflux to do NAS formation of the hydroxide, and then oxidize the
methyl group with hot permanganate to give the acid.
c. You first react toluene with hot permanganate to make benzoic acid, then react that with chlorine/iron to make the para-
chlorobenzoic acid which you heat with NaOH in water.
d. You react benzoic acid with chlorine and iron catalyst, then treat with concentrated NaOH in water and heat.
54 54. There are two components to a nucleophilic aromatic substitution reaction with the order of reactivity of:
Choose one answer. a. halide leaving groups on the aromatic ring being F>Cl>Br, I not reactive.
c. other activating groups that are NOT displaced but stay on the ring such as ester, nitro, sulfone and carbonyl.
55 55. The Kolbe and Riemer-Tieman reactions are special types of EAS reaction in which:
Choose one answer. a. chloroform is the electrophile and it reacts with the sodium salt of phenol (sodium phenolate).
b. bubbling carbon dioxide through a solution of phenol in water generates the para-hydroxybenzoic acid.
c. sodium phenolate (sodium salt of phenol) reacts directly with carbon dioxide (high temperature and pressure) to give
ortho- and para-hydroxybenzoic acids as their sodium salts.
d. phenol dissolved in ethanol with iron chloride reacts rapidly with carbonic acid to form the ortho- and para-
hydroxybenzoic acids.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 8/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
56 56. The key intermediate in electrophilic aromatic substitution (e.g., bromination of benzene) can be described best by which answer below?
Choose one answer. a. Bezene-derived anion adduct with delocalization of the charge around the ring.
b. Bezenonium ion, the cation formed by attack of the electrophile (e.g., bromine cation) on the ring to give an sp3
hybridized carbon.
c. There is no intermediate, just a transition state with the H-atom leaving as the electrophile forms a bond to that carbon.
d. A complex salt with the catalyst bound to the pi-cloud of the ring while the electrophile is attached to one of the bezene
hydrogens.
57 57. Almost all EAS reactions require a catalyst because (pick the best answer below):
Choose one answer. a. EAS is a difficult reaction since your going uphill energetically from an aromatic molecule, and the catalyst helps do this
by forming a more reactive electrophile.
b. The catalyst complexes with the aromatic ring to activate it for attack.
c. The catalyst brings the aromatic ring and the electrophile together so that they can react.
58 58. Nucleophilic aromatic substitution (NAS) is very similar to Sn2 substitution of alkanes because:
b. It is a process involving an attacking species and a leaving group, although for NAS there is also an intermediate.
Choose one answer. a. It requires a much more nucleophilic attacking species than in alkyl substitution reactions.
b. The aromatic nucleus being attacked must have electron donating groups attached.
c. A 3-center Intermediate exists involving the catalyst, nucleophile and aromatic ring.
d. It involves nucleophilic attack at an sp2 carbon which only occurs with strong electron withdrawing groups attached at or
in resonance with the substituted carbon.
60 60. The two types of aromatic substitution reactions (electrophilic and nucleophilic) are complementary in that (pick the best answer):
Choose one answer. a. The same types of substituents on the aromatic ring are activators in both cases.
b. The arrow showing electron motion in both cases always starts at one of the pi bonds on the ring.
c. EAS is enhanced by electron donating groups on the ring while NAS is enhanced by electron withdrawing groups.
d. Both use Lewis acid catalysts like iron chloride or aluminum chloride.
61 Based on the outer shell hybridization of the nitrogen, amines have what geometry?
Choose one answer. a. Modified structure with three sp2 orbitals in a trigonal planar array and one p-orbital with 2 electrons.
b. Two electrons in the 2s orbital and three bonding pairs of electrons in the three 2p orbitals.
Choose one answer. a. They have a lone pair of electrons in an sp3 orbital just sitting there waiting for something to happen, like protonation.
c. A proton can bind to one of the attached atoms through the excess electron density in the bonding orbital.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 9/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
b. Protonating the oxygen of the aldehyde and attacking with a neutral amine of some kind in an Sn2 reaction.
c. Mixing ammonia or a primary or secondary amine with the aldehyde, forming the imine and reducing with hydrogen and
a nickel catalyst.
d. Reduce the aldehyde to the alcohol with hydrogen and a catalyst, then reacting with an amine or ammonia at high
temperature in an Sn2 reaction.
Choose one answer. a. First reduce the acid with lithium aluminum hydride to the alcohol, convert to an alkyl chloride with thionyl chloride, then
heat with excess amine.
b. Heat the acid with ammonium hydroxide under high pressure and temperature, isolate the amide and reduce it with
lithium aluminum hydride.
c. Convert the acid to the acid chloride with thionyl chloride and heat, add sodium cyanide to form the nitrile and reduce
with lithium aluminum hydride.
d. All three of the above but with careful consideration of conditions and structure of the reactants.
Choose one answer. a. Reacting benzene with chlorine gas and iron chloride catalyst, then nitrating with nitric acid in sulfuric acid, isolating the
product and reducing with hydrogen using a palladium catalyst.
b. Heating benzene with ammonia under high heat and pressure; once the first amine adds, further reaction stops because
the amine is such a strong electron donator.
c. Reacting phenol with thionyl chloride to form chlorobenzene, then heating with ammonia under high temperature and
pressure.
d. By treating benzene with nitric acid in sulfuric acid, isolating the nitrobenzene and reducing with hydrogen and a
palladium catalyst.
Choose one answer. a. Secondary > tertiary > primary > ammonia due to steric effects for the tertiary putting it "out of order."
b. Tertiary amine > secondary > primary > ammonia due to electron donating ability of alkyl substituents.
c. Ammonia > primary amine > secondary > tertiary due to electron withdrawing ability of any heteroatom.
d. It will depend on whether we're talking about Lewis or Bronstead acid-base chemistry.
67 Reaction of isopropyl bromide (2-bromopropane) with amines varies how with amine structure?
Choose one answer. a. In a non-regular manner, with secondary amines often being more reactive than either primary or tertiary amines.
b. Only primary and secondary amines react due to steric inhibition with tertiary amines.
c. Because of steric inhibition caused by the huge isopropyl group, there is no reaction with any amines.
d. It doesn't vary at all since all amines and ammonia have the same basic reactivity.
68
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 10/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
Choose one answer. a. Pyridine is a benzene ring with an NH2 group attached that is basic like any amine.
b. It is a seven-membered ring with the six sp2 hybridized carbons accounting for the aromaticity and the nitrogen in the
ring providing basicity.
c. It is like benzene with one carbon replaced with nitrogen that also has a lone pair of electrons (basic) in an sp2 orbital
within the plane of the ring.
d. Pyridine is one of the nucleic acid bases possessing two nitrogens in the aromatic (benzene-like) ring and one nitrogen
NH2 attached.
69 Quanidine (CN3H5 with three nitrogens attached to the carbon) is a very strong base for protonation for what reason?
Choose one answer. a. Each of the amines has a lone pair of electrons making it three times more likely that a proton can bond to one pair.
b. Once one of the nitrogens is protonated, hydrogen bonding with the other nitrogens stabilizes the charge.
c. The proton in the protonated quandinium ion sits on top of and bonded to all three nitrogens at the same time.
d. Mainly because the protonated form has a positive charge resonance delocalized onto all three nitrogens through the
central carbon.
70 Nitrogen is similar to carbon and oxygen (adjacent 2nd row elements) in what unique way?
Choose one answer. a. All three have two electron in the 1s orbital.
b. It combines outer shell s and p electrons into four sp3 orbitals that are tetrahedral in shape.
Choose one answer. a. basic characters- they make water have a higher pH value when dissolved in it.
b. acidic characters- they make water have a lower pH value when dissolved in it.
c. exchangable hydrogens that can be converted to deuterium with heavy water (D2O).
Choose one answer. a. the reaction of ammonia with alkyl chloride with maybe heat to speed it up.
c. two-step reaction involving imine formation (amine plus aldehyde) followed by hydrogen reduction (with catalyst).
Choose one answer. a. primary, secondary, and tertiary, referring to the type of carbon directly attached to the nitrogen.
b. primary, secondary, and tertiary, referring to how many alkyl carbons are directly attached to the nitrogen.
Choose one answer. a. heating a methyl ketone with acid and iodine.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 11/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
Choose one answer. a. with heat to drive off water and make N-butyl acetamide.
76 The name of a tertiary amine with one butyl and two methyl groups is:
c. dimethylaminobutane.
c. carbonic acid.
d. benzoic acid.
78 Reacting 2-butene with peracetic acid (a peroxy acid) would lead to:
c. 2-butanol.
Choose one answer. a. decarboxylation with HBr and peroxide, then reaction of the alkyl bromide with ammonia.
b. reduction of the acid to the alcohol with NaOH/formaldehyde, then reaction with ammonium chloride and heat.
c. a two-step conversion, first to the amide with ammonia and heat, and then by reduction with litium aluminum hydride or
hydrogen plus catalyst.
80 Primary amines of primary alkanes can be converted to alcohols using the Hoffman-type reaction involving:
Choose one answer. a. reaction first with the Hoffman reagent and then heat with NaOH.
b. Exhaustive methylation with methyl iodide followed by heat with NaOH in water.
c. Conversion of the amine to an acetamide with acetic anhydride followed by reduction with hydrogen and catalyst.
d. Exhaustive ethylation with ethyl bromide followed by heat with KOH in ethanol.
Choose one answer. a. The carbonyl polarization pushes electrons onto the alpha-carbon and hydrogen through sigma bonds.
b. In the anionic intermediate formed, delocalization of charge onto the more electronegative oxygen occurs through pi-
bonds.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 12/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
d. The double bond to oxygen from the alpha carbon is conjugated to the intermediate carbanion through a double bond to
that carbon as well.
82 The acidity of a proton (hydrogen) alpha to most carbonyl compounds is around pKa = 25, but drops to what with two carbonyls attached to the same sp3
carbon with a hydrogen?
b. Less than 14 or so which means that aqueous base can deprotonate such compounds.
83 What is the best way to draw (describe) the sodium salt of 2, 4-pentadione (two acetyls on the same methylene)?
Choose one answer. a. Since only one hydrogen on the carbon is lost to form this, the sodium cation should be on the alpha carbon.
b. Since only one of the oxygens can undergo enol-keto tautomerism, the sodium cation should be on one oxygen.
c. Since both oxygens can equilibrate with the carbanion, why not put the sodium cation between them in a chelate?
d. Since the carbonyl oxygen lone pairs repel each other, one carbonyl will be twisted out of plane with the other, and will
have the sodium attached.
84 Reaction of almost any aldehyde or ketone with ethylene glycol (1, 2-ethanediol) and acid catalyst with water distillation does what?
Choose one answer. a. Reduces the carbonyl to an alcohol while oxidizing the ethylene glycol to acetaldehyde.
b. Dehydrates the glycol to vinyl alcohol which forms a C-C bond to the carbon alpha to the carbonyl.
c. Transfers one of the hydroxyl groups from the glycol to the carbonyl to form a hydrate (two OH groups on the same
carbon).
d. Well, if you're careful, in the end you form the acetal or ketal with no change in oxidation state.
Choose one answer. a. Reaction of an alkane with chlorine and UV light to form an alkyl chloride, conversion to an alcohol with NaOH and water,
and oxidation with CrO3 in sulfuric acid.
b. Treating an alkane with peroxide and acid to give an alcohol, followed by in situ (one-pot) oxidation to the carbonyl with
the same reagents.
Choose one answer. a. Reacting the alkene with hydrogen peroxide in acetic acid followed by adding water plus heat to give a glycol that is then
cleaved with more peroxide and heat.
b. Treating first with osmium tetroxide in pyridine, then adding hydrogen sulfide and extracting the product.
c. Reacting the alkene with ozone (O3) in chloroform (CHCl3) followed by treatment with peroxide.
87 In a different problem (somewhere here) you oxidized an alcohol to an aldehyde or ketone; now you want the alcohol back so you:
Choose one answer. a. Add concentrated NaOH in water and heat to drive off the water, then extract with methylene chloride to obtain the
alcohol.
b. Add to the carbonyl compound in ethanol concentrated sulfuric acid containing sodium borohydride, then neutralizing
and extracting with ether.
c. Dissolve the ketone or aldehyde in ethanol (maybe with a little water and NaOH added) and then slowly adding sodium
borohydride followed by neutralization and extraction.
d. Treat with hot potassium permanganate (KMnO4) in aqueous acid, then neutralize and extract.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 13/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
88 The Claissen-Schmidt reaction is a simple reaction (cyclohexanone plus 1 equivalent formaldehyde and sodium ethoxide catalyst) that forms what product?
Choose one answer. a. Since the formaldehyde is more reactive, it adds the ethoxide and the resulting carbanion adds to the ketone carbonyl
followed by loss of water to give cyclohexenylmethanal.
b. Abstraction of proton alpha to the ketone followed by attack at the formaldehyde carbonyl followed by a two-step proton
exchange and water loss to form the alpha methylene of cyclohexanone.
c. The cyclohexanone dimerizes and then formaldehyde donates a hydride to reduce the remaining ketone to give the diol.
d. The ethoxide attacks the formaldehyde first (more reactive carbonyl) and the adduct attacks the ketone to form the
acetal.
Choose one answer. a. Poisonous materials that are extremely dangerous due to reversible release of the HCN.
b. A member of the family of adducts called cyanohydrins, which can be hydrolyzed to the alpha-hydroxy acid.
c. The dicyano compound with both CN's attached to the carbonyl carbon and one equivalent of water released.
d. Reaction at the alpha-position of the enol form of the carbonyl to give a beta-cyano ketone or aldehyde.
90 The aldol reaction of acetaldehyde (2 carbons) with sodium ethoxide catalyst gives what?
Choose one answer. a. Addition of two equivalents of the ethoxide to the carbonyl carbon to form the acetal.
b. No reaction- ethoxide is not a strong enough base to actually catalyze any reaction of acetaldehyde.
c. A dimer joined at what were the carbonyl carbons, the product named as 2, 3-butandiol.
91 Cyclopentanone reacts with the non-nucleophilc but very strong base NaH to form an anion that then reacts with methyl iodide to give what product?
Choose one answer. a. The base removes an alpha proton to give the enolate anion which nucleophilically attacks MeI to displace the iodide and
form the alpha-methylcyclopentanone.
b. The initial enolate anion formed adds the iodine to the alpha carbon while the methyl ends up on the oxygen.
c. Initial enolate anion abstracts a proton from the methyl iodide carbon, which then attacks the carbonyl to form alpha-
iodomethyl-hydroxycyclopentane.
d. No reaction occurs- NaH is not a strong enough base to deprotonate a carbon alpha to a carbonyl.
92 You try to react 1, 5-cyclooctadione with chlorine using NaH as catalyst. You forget to weigh the NaH and end up using 2 equivalents which gives you a
product with no chlorine but different from the starting material: what is it?
Choose one answer. a. The first step goes fine to give 2, 6-dichloro-1, 5-cyclooctadione. The second NaH dehydrohalogenates to give a double
bond conjugated to each of the ring carbonyls.
93 Why are carboxamides are such wonderful and useful derivatives of carboxylic acids?
Choose one answer. a. Didn't know they were, but if you say so, it must be because they are so reactive.
b. Well, if nature uses them in peptides and proteins, they most offer something useful, like maybe hydrolytic stability and
intermolecular hydrogen bonding?
c. The sp3 hybridized nitrogen is almost as basic as a simple amine but with the added contribution of the attached
carbonyl to enhance metal binding.
d. There so easy to make that all living creatures can just ingest amines from food and convert them to amides in the
stomach.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 14/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
Choose one answer. a. Nitriles have a carbon-nitrogen "double bond" and are also called Shiff bases.
d. Nature uses acid chlorides (acyl halides) in the body to make natural amides such as peptides.
95 Even without a topic on polymers, can you pick out which of the following is not true?
Choose one answer. a. The common polymer cellulose is found in virtually all living organisms.
b. Polyester used in clothing and soda bottles is made from terephthalic acid and ethlene glycol (the same chemical used in
antifreeze).
c. Lipids are long-chain alkyl esters (of fatty acids) found in many living organisms.
d. RNA and DNA are polyesters made from inorganic phosporic acid and substituted sugar molecules.
Choose one answer. a. electrophilic attack of an amine on the central carbon of the acid group.
b. nucleophilic attack of the polarized central carbon of the acid group on alcohols and amines.
c. conversion to acid chlorides with thionyl chloride, a high-energy and very reactive inorganic acid chloride.
Choose one answer. a. reaction of an alcohol with a strong oxidizing agent like KMnO4.
Choose one answer. a. can be formed by simple mixing of an amine with an acid.
b. first reacting the amine with thionyl chloride and then adding the acid.
c. first reacting the acid with sodium hydroxide and then adding the amine.
d. first reacting the acid with thionyl chloride and then adding the amine.
Choose one answer. a. a central sp2 hybridized carbon, one sp2 hybridized oxygen and one sp3 hybridized oxygen.
b. an sp2 hybridized carbon that can accept a proton from another acid's sp3 hybridized OH moiety.
c. form amides by reaction with amines, heat and water removal by distillation.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 15/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
Choose one answer. a. first conversion of an alcohol to an alkyl iodide and then reaction with oxygen.
b. alcohol reaction with strong oxidizing agents like hydrogen gas and platinum catalyst.
c. conversion of an alkyl iodide to a Grignard reagent with magnesium followed by quenching with dry ice.
b. mixing the acid with excess primary alcohol and distilling off water.
c. mixing an acid with a tertiary alkyl bromide and KOH in t-butyl alcohol.
d. first converting to the acid chloride with thionyl chloride and then adding alcohol and dilute base.
Choose one answer. a. first converting the acid to an acid chloride then mixing with toluene and iron chloride, and heating for a while.
d. reacting the acid with KOH and then heating with phenyl bromide.
104 Acid chlorides are highly reactive derivatives of carboxylic acids that can:
Choose one answer. a. be made from alkyl alcohols by reaction with thionyl chloride.
Choose one answer. a. acids > acyl halides > esters > anhydrides > amides
c. esters > amides > acids >> anhydrides > acyl halides
d. amides >> acids > esters > acyl halides > anhydrides
106 Which is the best way to make an amide from a carboxylic acid derivative?
Choose one answer. a. Use two equivalents of amine with one equipment of acid chloride.
c. Use an anhydride with two equivalents of amine, one for each of the acid equivalents (oh, and add heat).
d. Use the classic Shotten-Baumen conditions of one equivalent of acid chloride in an organic solvent and one equivalent of
amine plus one equivalent of dilute inorganic base in water, stir rapidly, chill as needed.
107 Carboxylic acids form salts with amines that can be useful how?
Choose one answer. a. They're more water soluble as the salt, and if one is a medication, this can help in delivery.
b. You can heat the salt up under vacuum and form an amide (usually).
c. You can extract impurities away using water plus an organic solvent.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 16/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
108 Under what conditions can hydrolysis of a carboxylic ester or amide lead back to the acid?
Choose one answer. a. Simply mixing with water and stirring at room temperature.
109 Which acid derivative and what reaction conditions would give an aryl ketone?
Choose one answer. a. Heating an anhydride with the aromatic in refluxing water containing a strong acid catalyst.
b. Slowly adding a carboxylic acid to a mixture of concentrated nitric acid and the aromatic compound.
c. Carefully adding an aryl Grignard reagent to a carboxylic acid dissolved in an organic solvent.
d. Reaction of an acid chloride with a reasonably activated aromatic using a strong Lewis acid catalyst.
110 What is the key intermediate(s) of the reactions of many acid derivatives?
Choose one answer. a. That would have to be the Td or tetrahedral intermediate involved in the most common type, the addition-elimination
mechanism.
c. Acid reaction mechanisms are very much like an Sn2 reaction with simultaneous bond-formation and bond-breaking.
d. Acid reaction mechanisms are very much like an Sn1 mechanism with the loss of the leaving group occurring first to give
an acylonium ion.
111 How would you most efficiently (key word) convert an acid derivative to a primary amine?
Choose one answer. a. Reduce an acid to an alcohol, treat with thionyl chloride and add excess ammonia.
b. Make a primary-nitrogen amide and then reduce with excess hydrogen and a very reactive transition metal catalyst.
c. Mix ammonia and a carboxylic acid together with rapid stirring in water, then distill the water under vacuum.
113 The genetic code of all plants and animals is composed of what polymer?
Choose one answer. a. Natural (what else?) polyamides called DNA and RNA which contain nucleic acid bases in the repeat units.
c. Lipid polymers that contain nucleic acid bases organized in three-unit sequences.
d. Polymers of nucleic acid bases with phophoric acid to give complex polyesters abbreviated RNA and DNA.
Choose one answer. a. Natural monosaccharides such as hexoses and pentoses, although sucrose is a dimer sugar with two different
monosaccharides.
b. Oligomers and polymers of glucose, the most common of the sugars, with sucrose composed of two glucose
monosaccharides.
c. An artificial sweetener made of glucose and fructose units with non-natural stereochemistry at the anomeric carbons.
d. The monosaccharide that forms part of the polymer chain in RNA and DNA.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 17/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
Choose one answer. a. Sugar units (ribose with pendent nucleic bases) joined to each other with phosphate ester linkages to make RNA and
DNA molecules.
b. Complex carbohydrates containing both saccharide units linked with amino acid groups.
c. Oligomers and polymers of the group of 23 or so natural amino acids linked through amide bonds.
d. Ester- and amide-linked units of various combinations of the natural materials we ingest in our diets such as citric acid
and lysine.
Choose one answer. a. The polysaccharide of glucose called starch; it's also found in legumes and potatoes.
b. The polysaccharide of glucose called cellulose, a polymer with strong intermolecular hydrogen bonds that give these
materials such excellent physical properties.
c. Proteins such as collagen that are strong and have extensive intermolecular hydrogen bonding holding them together.
d. The polysaccharide with sucrose repeat units, which is why sucrose is so cheap and readily available.
117 Hair and skin are made of the same natural polymer as rhino horns: what is it?
Choose one answer. a. A complex carbohydrate containing both saccharides and amino acids in the polymer repeat units.
118 If you wanted to make your own soap, how would you do it?
Choose one answer. a. Take cotton fibers and mix with a strong base such as lye, add water, boil till the fibers dissolve, filter and evaporate the
water.
b. Add fur or wool to water containing strong acid, boil till everything dissolves, filter and evaporate the water to give the
slippery crude soap.
c. Start with animal fat or a plant oil, mix with lye (strong inorganic base) and water, heat till all the fat or oil dissolves,
filter and evaporate the water to give the fatty acid salt (soap).
d. Clot cream with acetic acid, mix the curds you get with yeast and let ferment until the bubbling stops; evaporate the
water to get soap.
Choose one answer. a. Lysine, alanine, glycine and aspartic acid for starters.
b. Serine, glutamic acid, thymine and adenine are the less common ones.
c. Steric acid, glucose, alanine and citric acid are the most common ones.
d. Lipoic acid, proline, lysergic acid and pyridine are the essential amino acids, meaning we must have them in our diet or
we get sick.
120
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 18/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
Choose one answer. a. RNA is the genetic material passed from parents to offspring while DNA transfers that genetic code into components of
cells and human bodies.
b. RNA uses different nucleic acid bases (different than adenine and thymine, for example) to carry the genetic information
to the enzymes that construct our bodies.
c. The sugar in RNA is ribose and the one in DNA is deoxyribose, but more important, DNA makes up our genes while RNA
does other stuff.
d. There is no chemical difference in terms of nucleic acid bases and sugar units, although DNA is a much higher molecular
weight polymer than RNA.
121 Of the 20 natural amino acids listed in the reading, 10 are called "essential", meaning what?
Choose one answer. a. That without them, you would die a slow, painful death.
b. You must take vitamins to make sure you get enough of these essential amino acids to survive.
c. Your body doesn't really need or use the non-essential ones, while the essential ones make up all the proteins your body
needs.
d. While your body can "manufacture" the non-essential ones from what you eat, it can't make the essential ones so you
have to make sure you eat the right balance of foods to get them in your diet.
122 Peptides and proteins are polymers of amino acids, and what is their basic structure?
Choose one answer. a. Peptides and proteins contain alpha-amino acids forming a two-carbon plus one-nitrogen polyamide with each repeat
unit usually having a pendent or attached side chain of some kind.
b. The amine group of each amino acid is protonated by the acid group of the one next to it forming a long chain of
ammonium-carboxylate salts.
c. The acid groups react with alcohol groups of other amino acids to form polyesters with amine-containing pendent groups
along the chains.
d. The amines, alcohols and thiols of the pendent groups all react with the acid groups to form complex 3D structures that
each have unique properties such as in enzymes.
123 The amide groups of peptides, proteins and enzymes have what unique property?
Choose one answer. a. The nitrogen group is basic and can form ammonium salts with carboxylic acids of other amino acids.
b. Like ketones, they can tautomerize to switch the hydrogen on nitrogen over onto the carbonyl oxygen, leading to
enhanced hydrogen bonding.
c. Because of the sp2 hybridization of the carbonyl and attached nitrogen, the amide group is "flat" and capable of strong
hydrogen bonding with other amide groups.
d. The free rotation around the carbonyl bond to the nitrogen allows these amino acid polymers to flex and bend as needed
in the body.
Choose one answer. a. The main constiuents of natural oils (e.g., canola oil) that are polymers of long-chain hydroxyacids.
c. Unsaturated long-chain aliphatic alcohols that form organized structures such as cell walls in plants and animals.
d. The main components of animal fats (ours included), milk fats and butter.
Choose one answer. a. Using the interaction of radio waves with molecules to understand molecular structure and properties.
b. Using energy to force molecules to change shape or structure in such a way that we can observe it with a microscope.
c. Using visible or ultraviolet light to illuminate molecules so we can see them with a microscope.
d. Exciting molecules with heat and light so that they emit vibrational energy that can be detected and analyzed with
spectrometers.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 19/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
126 The relative energies used in various kinds of spectroscopic methods vary how?
Choose one answer. a. From low energy ultraviolet rays to infrared and then to microwaves used in NMR analysis and finally high energy
electrons in mass spectrometry.
b. From high frequency radio waves to lower frequency electrons for NMR to infrared to UV to mass spectrometry.
c. You can't really compare the energies since each type of spectroscopy uses a unique mixture of frequencies.
d. It's not really the energy used, since this can vary independently of frequency or wavelength.
Choose one answer. a. mass analysis of whole molecules that have been given a static electricity charge using a voltameter.
d. careful weighing of the molecules with super-sensitive nano-balances constructed with microlithography.
128 Fragmentation "patterns" in mass spectrometry tell us what about the molecules?
Choose one answer. a. What kinds of impurities were present and how much of each was there.
b. How many atoms of each kind were present in the original molecule.
c. What functional groups were present so that we can determine the functionality of the original molecules.
d. The atomic compositions of segments of the molecule that we re-assemble virtually to determine the original structure.
Choose one answer. a. All types of bonding from sigma bonds to pi bonds to conjugated and aromatic bonding.
b. Double bonds, aromatic rings and conjugated unsaturation, and non-bonded heteroatoms all absorb in the UV spectrum
and can be detected.
c. We can see the fragments that give us broad peaks or humps in the spectrum and this tells us what kinds of bonds are
involved.
d. It is most sensitive to carbonyl bonds and less to aromatic and conjugated double bonds.
130 UV spectroscopy generally shows a combination of broad peaks and sharper ones that tell us what?
Choose one answer. a. What atoms are attached to a double bond or aromatic ring.
c. The degree of conjugation (pi electron delocalization) and something about substitution patterns.
Choose one answer. a. What kinds of functional groups like amides, ethers and alkene double bonds are present in the molecule.
b. Its purity and what kinds of impurities are present in the mixture.
c. The exact kind and number of each functional group comprising the molecular composition.
d. The total number of atoms and what kind of each are in the molecule.
132 Infrared was one of the first spectroscopic methods and is still widely used today to characterize molecules because:
Choose one answer. a. You can sample solids, liquids or gases although the information obtained isn't useful without combining with other
techniques of analysis.
b. It tells you more about the molecule than any other technique we've studied.
c. It is easy to do, takes very little sample and gives specific information about what functional groups are present in the
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 20/21
10/18/23, 2:36 PM CHEM104-FinalExam-Answers
molecule.
Choose one answer. a. It uses a different energy range from UV but the same range differently from NMR.
b. Infrared overlaps with UV in the electromagnetic spectrum providing complimentary information on functional groups
while NMR looks at electronic configuration and bonding.
c. They all see different parts of the molecule, and specifically, different atoms and how they're joined together.
d. Infrared detects vibrational motions of functional groups while UV "sees" electronic transitions and NMR looks at the
nuclei and infers bonding based on reference tables.
Choose one answer. a. Spinning nuclei in such a way that they can be seen with infrared radiation and functional groups determined from the
frequency.
b. Using radio waves to detect nuclei present in a molecule (such as H or C) and based on extensive data bases of
"chemical shifts, " determine what each type is bonded to.
c. Magnetizing the molecules so they can be separated by traveling through a vacuum down a long tube surrounded by
static magnets.
d. Using high energy beams to excite the electrons so they can be detected by magnetic field fluctuations.
Choose one answer. a. What kind of hydrogens are present (what each kind is bonded to) and exactly how many there are relative to each
other.
b. Whether there are any hydrogens present in the molecule and what their chemical shift is with respect to a standard
(TMS).
d. What kind of heteratoms are near the hydrogens you observe in the spectrometer.
Choose one answer. a. It has a higher atomic mass which makes it slower to move and relax on the NMR time scale.
b. The mechanism of interaction of the isotopes of carbon (number 13) with a magnetic field is dependent on how many
hydrogens are attached to it.
c. The actual atoms of carbon observed (the isotope we can detect) is of lower relative abundance than for hydrogen.
d. The gyromagnetic ratio (NMR sensitivity factor) is much less for carbon 13 than for hydrogen 1.
137 The chemical shift range for carbon 13 in NMR is different from proton NMR how?
Choose one answer. a. It's about the same but the relative intensity of the peaks are less, making it much harder to detect.
b. Carbon covers about a 200 pm range while hydrogen has a range of only about 10 ppm and this makes carbon more
sensitive to its chemical environment (groups present).
c. It's more sensitive to solvation and hydrogen bonding which provides key information about molecular motion and
interactions.
d. It's actually much less, and thus provides less specific information about what kinds of functional groups are present in
the molecule.
https://saylordotorg.github.io/LegacyExams/CHEM/CHEM104/CHEM104-FinalExam-Answers.html 21/21