Professional Documents
Culture Documents
IEC Motor Protection Book
IEC Motor Protection Book
This book is the result of a web search made from Selected Optimized Coordination Coordination tables for motor protection
(/soc) made on 19 Oct 2023.
Please always refer to /soc for the lastest updated information.
Guarantee
The information contained in SOC – Selected Optimized Coordination – reflects the current state of our knowledge and aims to present our products for motor
coordination and their possible applications as defined with the applicable International standards. The product data, ratings and utilization conditions are
indicated in SOC coordination tables; thus, the information does not guarantee special utilizations or combination of characteristics that have not been defined or
tested according to normalized values or test conditions defined with the standards and does not guarantee the fit for any specific purpose. The devices shall be
used in accordance with the user manual.
This SOC tool is made available “as is” and with no express warranty. ABB further disclaims all other statutory and implied warranties, including, but not limited
to, any warranty of fitness for particular purpose or merchantability. The user and user’s company agree that in no event will ABB be liable to the user or user’s
company for any claims, liabilities, or damages even if caused by the negligence of ABB, and under no circumstances will ABB be liable for any indirect, special,
incidental or consequential damages.
Liability
The devices in coordination tables do not endanger safety when they are selected, mounted, commissioned, used, maintained and disassembled with the
applicable rules and standards and in accordance with the user manual. The devices shall be used by experts and welltrained people.
The results generated by the SOC tool must be reviewed and approved by the user.
Additional information
We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed
particulars will take precedence. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.
Used filters:
Standard: IEC
Motor Efficiency Class Design: Any
Index
Data exported from SOC tool on: 2023/10/19
Molded case circuitbreaker, StarDelta Normal Start, 400 V AC, 36kA, IEC Type 2, Thermal overload relay, IE3/IE4 NE/HE............................. 4
Table ID: 3998
Starter Type : StarDelta starter Starting type : Normal start Motor Efficiency Class Design : IE3/IE4 NE/HE
Rated voltage : 400 / 415 V AC Rated shortcircuit current : 36 kA Coordination type : IEC Type 2
Protection Device : Molded case circuitbreaker Overload protection : Thermal overload relay Table version : Tmax XT + AF + TF IE3
Table status: Active Created on date : 3/3/2016 3:22:31 PM Edited on date : 6/25/2020 11:43:45 AM
Comments :
Valid also for 415V.
1) DB19EF mounting kit is needed.
ABB reserves the right to modify the content of this document on the basis of technical development of the products, without prior notice.
Copyright 2023 ABB. All rights reserved.
Page 4