Professional Documents
Culture Documents
Building and Furniture Technology (2) Sba
Building and Furniture Technology (2) Sba
Centre number:
Candidate number:
Table of Content
Core
Fundamental of Industry
Report of an Accident
PowerPoint Presentation
Practical Activities
Layout of a Building
Possible solutions
Orthographic drawings
Steps of procedure
Construction Project
Pictorial Sketch
Procedure
List of Materials
Joints
Assembly
Finish
Pictorial Sketch
Procedure
List of Materials
Joints
Assembly
Finish
Appendix
Reference Page
Fundamental of Industry
Introduction
Strength Construction Ltd & Interior Design is a construction company in Jamaica with a strong property portfolio. an have over 15
years of experience in residential and commercial property development. Whether it is drawing panoramic views of a building,
creating a beautiful ceiling design, building and remodelling a house or developing a project plan, we will be with you from start to
finish
Services
The primary services provided by this arm of the company are:
PROJECT MANAGEMENT
ARCHITECTURAL DESIGNS
CONSULTATION
RESIDENTIAL CONSTRUCTION
COMMERCIAL CONSTRUCTION
INTERIOR DESIGN
LANDSCAPING
RENOVATIONS
Organizational chart
CEO
Manager Chief Financial Officer
General workers
Customer
About company
the strength of our team and the quality of the work we deliver. We have a strong team of professionals who are experts in their
field. Each member contributes to the satisfactory delivery of a project and approaches our tasks with a high level of urgency,
professionalism and accuracy, as we believe, “it must be done right the first time”.
Number one
PROFESSIONAL &
EXPERIENCED TEAM
Number Two
QUALITY CONSTRUCTION,
BUILT TO
Construction plays a huge role in our daily lives. However, improper construction work can be
dangerous.
All workers must have their PPEs on when on the work site.
No unprofessional is allowed on site.
Keep electrical equipment covered and dry in between uses.
Materials and equipment’s should be stored safely.
LASCO Distributors Limited was founded over 24 years ago in September 1988 by Hon. Lascelles Chin. The company listed on the
Jamaica Stock Exchange (JSE) on October 12, 2010.
LASCO Distributors Limited is a leading marketing and distribution company in Jamaica. The company markets and distributes food,
consumer, personal care and pharmaceutical products for local and international brands as well as its own private brands.
The company is comprised of two divisions: the Consumer division and the Pharmaceutical division.
The LASCO Distributors Limited consumer division is located at White Marl, St. Catherine. The facility is a 25 acre property with over
100,000 sq. ft. of offices and warehouse space. LASCO Distributors Consumer Division is one of the largest distributors of consumer
products in Jamaica, with over 250 consumer products.
We distribute principal brands such as Maruchan pack soups, Salada line of hot beverages, which includes the premium Jamaica
Mountain Peak Coffee and Fun C, a line of children’s juice drink beverages.
The LASCO Distributors Pharmaceutical Division, located in Kingston, presently represents a number of international drug houses.
The division also distributes LASCO branded vitamins and supplements and a line of generics under the LASMED brand.In recent
times, apart from human health care products, the company has garnered success in animal health care products.
Services
We distribute principal brands such as Maruchan pack soups, Salada line of hot beverages, which includes the premium
Jamaica Mountain Peak Coffee and Fun C, a line of children’s juice drink beverages.
LASCO Distributors Limited is a leading marketing and distribution company in Jamaica. The company markets and distributes food,
consumer, personal care and The LASCO Pharmaceutical Division is focused on the marketing, sales and distribution of ethical
pharmaceutical, OTC and Health and Personal Care products representing several of the world’s leading Pharmaceutical companies
including ASTRAZENECA, BAYER and ROCHE.
Products
Lasco produces many different variety of products
LaSoy,
iCOOL Beverages,
, AXE,
DOVE,
DEGREE
SUAVE.
LASCO
JAMAICA MOUNTAIN PEAK coffees and teas, and the premium MOUNTAIN BLISS range.
ORGNIZATION CHART
Impact of the production process on the
environment
Lasco ltd is one of the lagest manufacturing and export they impact the Manufacturing Limited has distinguished
itself in its dedication to the development of Jamaica and the region, through educational and social programmes and
the delivery of assistance to the less fortunate. The company has spearheaded and supported
Energy consumption: Manufacturing often requires a lot of energy, which can come from non-renewable sources like
coal or natural gas. This can contribute to greenhouse gas emissions and climate change.
Waste generation: Manufacturing can generate a lot of waste, including hazardous materials that can harm the
environment and human health.
Water usage: Some manufacturing processes require a lot of water, which can deplete local water resources and harm
aquatic ecosystems.
Air pollution: Manufacturing can release pollutants into the air, including volatile organic compounds (VOCs) and
particulate matter, which can harm human health and contribute to climate change.
Resource depletion: Manufacturing often relies on the extraction of natural resources, which can lead to the depletion
of those resources over time.
To mitigate these impacts, manufacturing companies can adopt sustainable practices like using renewable energy
sources, reducing waste and water usage, controlling air pollution, and implementing recycling programs.
ACCIDENT REPORT
Treatment:
him to the St Ann’s bay Hospital, located on blue road Pen walk
placed Jayquan broken arm on a straight and steady structure to keep his broken arm from moving to keep the pressure off to
an operation room that I was not allowed in. One hour later the
doctor came out of the operation room and told me that Jayquan
BUSINESS PLAN
Group members:
Javier henry
Knae Hines
Terra Black
Shaine mack
Dane kaby.
Table of Contents
Executive Summary
Management/Organization Financing
Executive Summary
TEC Engineering and mechanical Group focusses on building, electrical, mechanical and
health care and commercial facilities, and through subcontracting with architects working on
such facilities. The group provides engineering services using technologically superior
processes, providing greater value for clients and enhanced design and construction.
The target clients are engineering firms. The targeted goal is segmented into five
The company is owned by the four founding partners: all engineers, with years of
Mission
Our mission is
OUR MISSION
processes. TEC Engineering and mechanical Group will provide these services by
offering technical and operational expertise, safe practices, and turn key
Engineering and mechanical Group will continue to help our clients solve their most
company.
Objectives
TEC Engineering and mechanical Group has identified the following objectives:
Company Description
TEC Engineering and mechanical Group was started at 34 main street in May Pen
and architects. We provide services in the fields of Electrical, Mechanical, and Plumbing.
Market segments serviced by the firm include private and public instructive institutions,
health care facilities, and marketable groups with facilities needed design, updates, or repair
building start-up, on a wide variety of facilities, including new and upgraded commercial,
residential, institutional, and health care complexes. Our focus will be public the Island.
Product/Service
TEC Engineering and mechanical Group offers complete building engineering services
for mechanical, electrical and plumbing. We will focus on the following use and
occupancies:
∙ Educational Facilities
∙ Health Facilities
∙ Commercial Buildings
∙ Institutional facilities
∙ Renovations
∙ Rehabilitation
∙ Additions
∙ New construction
We offer ground breaking and economical design services, maintaining top notch
We will market our company through all the different mediums to rise above all the
competitors in the mechanical engineering field . We will leverage our growth through
providing quality, on schedule jobs and within budget at a reasonable price. Offer no or low
cost preservation training for staff members at plans that are delivered.
Target Market
Our target market are homeowners, developers, private and public entities. Our strategy
is to offer them a viable resource from which to draw upon. We can undertake the entire
building, mechanical, electrical and plumbing process for their architectural projects.
Our main aim is to give the best learning experience for itself by providing value for
money and customer satisfaction. We will be using the online and personal contacts in our
sales promotion. These, together with a well targeted direct mail and e-mail campaign, will
make all the major players in the marketplace aware of our presence.
We will focus our limited advertising budgets to promote community sponsored events. We
will also offer other technical services at low prices for non-profit organizations.
Operating Plan
Our company will be in operation seven (7) days of the week providing full services
Monday 8:00 am – 6: 00 pm
Tuesday 8:00 am – 6: 00 pm
Wednesday 8:00 am – 6: 00 pm
Thursday 8:00 am – 6: 00 pm
Friday 8:00 am – 5: 00 pm
Saturday 8: 00 am – 4: 00 pm
Sunday 10:00 am – 3: 00 pm
Management/Organization
Knae Hines ,Terra Black ,Shaine mack , Dane cabby , Dane cabby has over 30 years
position in leading construction firm. His involvement span minor, standard and bulky
national projects. Javier henry has design Scotia Bank Headquarter, Bargain Villages
Knae Hines has over 16 years of experience in electrical engineering, project management,
and consulting management for both large consulting firms and industry. She has designed
power distribution, lighting, communication, security and fire protection systems for both
newly constructed and renovated industrial, commercial, and institutional buildings. Her
consulting firm management experience will provide the group /institution with direction
Terra Black has over 19 years of experience in electrical engineering and project
management. Her experience includes the design of medium and low voltage
distribution systems, interior and exterior lighting, fire protection, security and CCTV
Shaine mack has over 13 years’ experience in mechanical engineering and project
management. Her experience includes the design of chilled water, hot water steam and heat
pump systems, performing energy efficient surveys, and utilizing measuring and testing
equipment. She is also very familiar with the latest building control systems, in particular,
direct digital control systems. I will be in charge of all mechanical design and technical jobs
Financing
We want to economics development mainly through cash flow, investment and short-
Design principle and Processes
PRODUCT ANALYSIS
This is the all-in-one drill kit Milwaukee 2801-22CT M18 1/2 in Compact Brushless Drill/Driver Kit
Function
This product helps with applying and removing screws quickly and efficiently and also drill holes with the removable bit.
Size
This product drill’s compact body is 6-1/2 in. long and lightweight at 3.4 lb.
Manufacturing
Safety
This is a very safe tool in the hands of adults but over all it is very easy to use.
Cost
Aesthetics
The product has a red an black finish with a black plastic grip.
Environment
Material
The overall build-up of this tool is made up of a high carbon steel which is joined by a plastic and rubber shell body
PowerPoint Presentation
TABLE SAW
LDING TEC POWER POINT
A table s a w i s a w o o d w o r k i n g tool, c o n s i s t i n g of a
a h ig h d e g re e o f p re cisio n . O n ce yo u se t u p th e c u t yo u
wa n t to ma ke , i t ' s h a rd to g o wro n g . Y o u s i m p ly p u sh
th e wo o d in to th e sa w, a n d th e to o l e n su re s yo u ma ke
e x a c t l y th e sa me c u t e ve ry time .
What are the uses of a table saw
• Bevel Cuts
• Cutting Joints
1. We set out the front of the building line with pegs and marks at the required distances.
2. We placed the buildings square so that the front line touches one side of the square
3. We stretched a line from the corner pegs so that it is parallel to the second side of the
square and established the third peg. We ensured the angle 90 is obtained
With the help of a tape measure, we marked out the length and width of the proposed building
5. After establishing the four corner pegs, profile boards were erected in the same way
as described above.
6. First the corners of the building were marked and then the lengths of the sides were
7. The center lines of the trenches were marked with the help of profiles, sighting rails,
8. The off-sets were measured from center lines and the frontage lines were placed in
9. The position of cross walls was measured along the main walls and was squared from
these wails. While the total width of trenches was carefully outlined.
Getting your foundation layout square and to the correct dimensions is key to building a small
building. My classmates and I had to ensure that we had all the layout square and also that all of
our dimensions were correct. Our class learned two methods during various classes. The first
method is known as the "3:4:5 Triangle Method" and the second is called the "Diagonal
Method." Both are equally accurate as they use the power of the rules of trigonometry in order to
achieve squareness which is key to achieving a successful well-fitting project. Our class agreed
WHAT WE DID?
The "Diagonal Method" of layout for building a small building shown in the diagram below. To
do this method you only measure the opposing diagonal corners until you get them the same
distance apart. Once the diagonal lines are equal you will have a perfect square. This method will
List of
PROCEDURE FOR TABLE
Construction Project
List of Materials- Construction
½”ton
steel 3/4”
steel
2x4x 16 lumber
1x3x16 lumber
2” Concrete nail
2 ½” Concrete nail
2 inches screws
Binding wire
Cement
Sand
Gravel
Water
Bend the steels using the jig and a pipe to m Wooden Form Work
List of materials
5/8 construction ply
Lathe 1x3x16
2 ½ inch wire nail
3. Lay out and join the pieces together with wire nails.
4. Check the columns to ensure that they are vertical using a level
7. Pour concrete