Professional Documents
Culture Documents
HW 6
HW 6
HW 6
4.75 The cord passing over the two small pegs A and 4.84 Determine the distance d between A and B so that
B of the board is subjected to a tension of 100 N. the resultant couple moment has a magnitude of MR =
Determine the minimum tension P and the orientation 20 Nm.
θ of the cord passing over pegs C and D, so that the
resultant couple moment produced by the two cords is
20 Nm, clockwise.
4.105 Replace the loading system acting on the beam 4.109 Replace the loading by an equivalent resultant
by an equivalent resultant force and couple moment at force and couple moment at point O.
point O.
4.125 Replace the loading on the frame by a single 4.137 Replace the three forces acting on the plate by a
resultant force. Specify where its line of action wrench. Specify the magnitude of the force and couple
intersects a vertical line along member AB, measured moment for the wrench and the point P(x, y) where the
from A. wrench intersects the plate.
4.146 Replace the loading by an equivalent resultant 4.160 Replace the distributed loading with an
force and couple moment at point A. equivalent resultant force, and specify its location on
the beam measured from point A.
484
fi Of_d 38 it damiR d Perpendicular
distance
2 0.86605 t ois di
M TABX F
i k
0 이
0.866
0.54a 30.31d Nm
Magnitude
5 배 t O O 35
d 0.3421M Mai TA叭 五
i i k
0 0.866 이 0.5t 25.0dg 43.30d E Nm
TO O O
姿 jo 影 十
車 亨影 it as
2 5A
7J KN.hn
125
王下二 50010S600 250X54
T 500SM600
i
250 soo
e 4501 883.0127
1T
Magi 45021 883.012에 991N
E arctan 88
주일재 630
ccg
450
fein 세 싸어 5.00 60D T20 XEx5
d
300X2250153K
137 쭗 1.78M
F aint 200J 300E
Mag FTA12
4002 2002t3고 538 516
unit vector I 0.7428 it 0.3714J 0.5571T
도Mi 0.7428 Mi 300g
도My 0.3714mi30013기
도ME 0.5571Mt 200자400C5Y
f
瀟 뺺 I
I
Mag
Moment 0.6 0.9 1
3.96kN h
last
1.8
3뺰
t 1.2 1.8056810.6
0.9
ii as
160
W f E4 자60 KNN
I
一一
_if_ 해제에
t.in_ 해체에 8236
ring 핳쁭 쌰땷遐 지
竺