Professional Documents
Culture Documents
Mat Cscec 12 Me HD 0072 04
Mat Cscec 12 Me HD 0072 04
3. Delivery :
Country of origin : UAE
Availability
Locally Manufactured Overseas
We certify that the above submitted items have been reviewed in detail and are correct and in strict conformity with the contract drawings and specifications except
as otherwise stated; also that the material sources indicated above have been reviewed in detail and that they will supply the submitted items in conformity with the
above and deliver same timely.
S-PRC-SS-02(F26) Rev 2
Submittal For Approval Of Materials
Date: 09 MAR. 2022
Request no: MAT-CSCEC-12-ME-HD-0072-03
Project No. & Title: E18066-0200S - The Central Business District of the New Administrative Capital of Egypt
3. Delivery :
Country of origin : UAE
Availability
Locally Manufactured Overseas
We certify that the above submitted items have been reviewed in detail and are correct and in strict conformity with the contract drawings and specifications except
as otherwise stated; also that the material sources indicated above have been reviewed in detail and that they will supply the submitted items in conformity with the
above and deliver same timely.
S-PRC-SS-02(F26) Rev 2
CENTRAL BUSINESS DISTRICT – NEW ADMINISTRATIVE CAPITAL
MAT-CSCEC-12-ME-HD-0072-03
1- As per your compliance all fans housing shall be heavy gauge steel hot dip galvanized,
otherwise will not be accepted (mentioned PPGI, PPGL sheet in your catalogue or in
compliance is not accepted).
2- As for EF-D01-BS1-02 which is serving UPS room, motor must be explosion proof, your
proposed fan PR -AC ATX 456T is polyethylene casing not accepted, reselect another model.
3- Comparison table showing IFC data in equipment schedule (unit no. , location, system served, fan
type, flow rate and external static pressure, quantity and remarks) and proposed model by supplier.
Noted.
Rev.3:- Noted.
4- Compliance statement should be stamped by supplier and CSCEC, as well mention your page
reference in case compliance. As for fans construction and accessories will be according MAT-
CSCEC-02-ME-HD-0024-03,
REV3. Still valid.
5- In computer selection per each fan, add pages for all accessories (vibration isolators, sound
attenuator, seismic restraints, extra material, -----etc.).
Rev3. Still valid, the contractor /supplier is requested to provide all specified accessories
otherwise will not be accepted, your mentioned accessories in your letter MGU-EGY-029-R1
are not matching with specified accessories you are obligated to provide all specified
accessories otherwise will not be accepted.
6- As per specs 233416-1.3-F, Overall efficiency shall be minimum 60 percent, some proposed fans
have overall efficiency less than 60 % such as EF-D01-MEP-03, EF-D01-BS1-04, EF-D01-GF-
01&2, follow specs.
Rev.3:- Efficiency less than 60 % can be accepted for low flow rate (500 l/s and less).
7- As per specs 233416-1.3-D, Noise level shall not exceed level allowed for place of installation.
Noise level for all ceiling mounted equipment shall not exceed NC35, some proposed fans have NC
higher than 35 such as EF-D01-MEP-02, EF-D01-MEP-04, EF-D01-GF-02, follow specs, and
indicate all fans that are located above reflected ceiling clearly in your submission.
Rev.3. Still valid, the contractor is responsible for achieve specified noise criteria, study by
specialist shall be submitted.
Rev.3.Noted.
Page 1 of 3
CENTRAL BUSINESS DISTRICT – NEW ADMINISTRATIVE CAPITAL
MAT-CSCEC-12-ME-HD-0072-03
Rev.3 Noted.
10- Approval of external static pressure for fans to be attached in computer selection per each fan. Still
valid.
Rev, 3 Noted.
11- Mentioned altitude in your selection is incorrect and also related air density, rectify.
Rev.3, Still valid, follow project altitude for basement, MEP and roof floors.
*Rev.2:- your reply is not accepted refer to material submittals reference (MAT-CSCEC-13-
ME-HD-0038-01& MAT-CSCEC-14-ME-HD-0029-01 ) from another manufacturer where fan
speed less than 1450 r. p.m. at low flow rates.
Rev. 3, as agreed till 1900 rpm can be accepted only for emergency fan (pressurization and
smoke).
14- Fans allocated for car park ventilation shall be submitted in separate submittal complete with
CFD report.
Rev.3, Still valid.
15- Where IFC equipment schedule mentioning that V.F.D , submit evidence in your computer
selection and related catalogue showing that selected models have motor suitable for V.F.D.
Rev3, Noted.
Page 2 of 3
PROJECT : THE CENTRAL BUSINESS DISTRICT OF NEW
ADMINISTRATIVE CAPITAL OF EGYPT—TOWER D01
Building Fans Only Ref.: SUB-D01-R1-April-2022
MANUFACTURER : MAICO GULF L.L.C.
BRAND : DYNAIR
URBAN COMMUNITIES
1. Compliance Statement
3. Technical Datasheets
7. COO Letter
8. Product Certificates
9. Wiring Diagram
www.dynair.it
COMPLIANCE STATEMENT
Fan Compliance Sheet
Date: 22/06/2021 Consultant: Dar
Project: Central Business District of the new administration Capital (C01&04) Contractor: China State Construction
1.2 SUMMARY
Fan Unit Schedule: Performance requirements and data are described in equipment
C Comply.
schedule(s) on the Drawings.
All fan bearings, where applicable, shall be of heavy duty type suitable for
D Comply.
continuous operation.
1.4 SUBMITTALS
Product Data including rated capacities of each unit, weights (shipping, installed,
and operating), furnished specialties, accessories, and the following: 1. Comply.
1. Certified fan performance curves with system operating conditions indicated. 2. Comply.
A 2. Certified fan sound power ratings. 3. Motor 3. Comply.
ratings and electrical characteristics plus motor and electrical accessories. 4. Comply.
4. Material gages and finishes, including color charts. 5. Dampers, 5. Not Applicable.
including housings, linkages, and operators.
Coordination Drawings, including floor plans and sections drawn accurately to scale.
Submit with Shop Drawings. Show fan room layout and relationships between
C components and adjacent structural and mechanical elements. Show support Under Contractor's scope.
locations, type of support,
and weight on each support. Indicate and certify field measurements.
Wiring diagrams detailing wiring for power and control systems and differentiating
D Comply. Please refer Submittal.
clearly between manufacturer‐installed and field‐installed wiring.
Field Test and Commissioning Reports: As specified in "Field Quality Control" and
E "Commissioning" Articles in Part 3 of this Section. Indicate and interpret test results Comply.
for compliance with performance requirements.
Maintenance data for fan units to include in the operation and maintenance manual
Please refer attached O&M
F specified in Division 1. 1. Include: Lists of parts and Comply.
Manual.
troubleshooting maintenance data.
Electrical Component Standard: Provide components that comply with NFPA 70 and
A Comply. As per IEC standard.
that are listed and labeled by UL where available or equivalent European standard.
Listing and Labeling: Provide electrically operated fixtures specified in this Section
that are
B Comply.
listed and labeled. 1. The Terms
"Listed" and "Labeled": As defined in NFPA 70, Article 100.
AMCA Compliance: Provide products that meet performance requirements and are Please refer attached AMCA
C Comply.
licensed to use the AMCA Seal. Certificates
NEMA Compliance: Motors and electrical accessories shall comply with NEMA
D Comply. As per IEC standard.
standards.
Lift and support units with the manufacturer's designated lifting or supporting Refer O&M Manual, attached in
B Comply.
points. submittal.
1.7 PROJECT CONDITIONS
A Field Measurements: Verify dimensions by field measurements. Verify clearances. Noted. Under Contractor's Scope.
Do not operate fans until ductwork is clean, filters are in place, bearings are
B Noted. Under Contractor's Scope.
lubricated, and fans have been commissioned.
1.8 COORDINATION AND SCHEDULING
Coordinate the size and location of concrete housekeeping pads. Cast anchor‐bolt
A inserts into pad. Concrete reinforcement and formwork requirements are specified Noted. Under Contractor's Scope.
in Section "Cast‐in‐Place Concrete."
Provide system warranty in which Manufacturer, Installer, and Contractor are jointly
B and severally liable and agree to repair or replace defective components of the Comply.
warranted item.
PART 2 ‐ PRODUCTS
2.1 TUBE AXIAL FANS
Vane Axial Fans are offered against Tube Axial Fans, due to Compliance requirement and Higher Efficiency.
Description: Fan wheel and housing, factory‐mounted motor with belt or direct
A Comply.
drive, an inlet cone section, and accessories.
B Housings: Galvanized steel with flanged inlet and outlet connections. Comply.
13. Comply with In‐build Guide Vanes for vane axial For 14, 15 and 16 = All axial fans
fans. are provided with counter flanges
13. Inlet Vanes: Adjustable; with peripheral control linkage operated from outside of 14. Applicable, for free intake only. with collar for easy duct
airstream, bronze sleeve bearings on each end of vane support, and provision for 15. Applicable, for free intake only. connection.
manual or automatic operation of same material as housing. 16. Applicable, for free discharge only.
14. Inlet Bell: Curved inlet for when fan is not attached to duct, of same material as 17. Under Contractor's Scope.
housing. 18. Not Applicable for Axial Fans.
15. Inlet Cone: Round‐to‐round transition of same material as housing.
16. Outlet Cone: Round‐to‐round transition, of same material as housing.
17. Stack Cap: Vertical discharge assembly with backdraft dampers, of same material
as housing.
18. Direct‐Driven Units: Encase motor in housing outside of airstream, factory wired
to disconnect switch located on outside of fan housing. Extend lubrication lines to
outside of casing and terminate with grease fittings.
Factory Finishes:
1. Sheet Metal Parts: Prime coat before final assembly.
2. Exterior Surfaces: Baked‐enamel finish coat after assembly. All Vane Axial fans are Hot Dip
F Comply.
3. Coatings: Hot‐dip galvanized. Galvanised Casing.
a. Apply to finished housings.
b. Apply to fan wheels.
2.2 VANE AXIAL FANS
Description: Vaneaxial fans consisting of fan wheel and housing, straightening vane
section, factory‐mounted motor, an inlet cone section, and accessories. Variable
features indicated in equipment schedule include belt driven or direct drive as
indicated, and variable
A Comply.
or adjustable pitch.
1. Variable‐Pitch Fans: Internally mounted pneumatic actuator, externally mounted
positive positioner, and mechanical‐blade‐pitch indicator for variable‐volume
operation.
Housings: Galvanized steel with inlet bell and diffuser sections. 1.
Inlet and Outlet Connections: Outer mounting frame and companion flanges; inlet
cone shall be welded to the fan raceway.
2. Guide Vane Section: Integral guide vanes downstream from the fan wheel
B Comply.
designed to straighten the airflow.
Belt Drives: Factory mounted, with final alignment and belt adjustment made after
installation.
1. Service Factor Based on Fan Motor Size: 1.2
2. Fan Shaft: Turned, ground, and polished steel designed to operate at no more
than 70 percent of first critical speed at top of fan's speed range.
3. Fan Pulleys: Cast iron with split, tapered bushing; dynamically balanced at factory.
4. Motor Pulleys: Adjustable pitch Select pulley so pitch adjustment is at the middle Belt and Drive Setup are Not
D of adjustment range at fan design conditions. Not Applicable. Applicable for Direct Driven Axial
5. Belts: Oil resistant, nonsparking, and nonstatic; matched sets for multiple belt Fans.
drives.
6. Belt Guards: Fabricate of steel for motors mounted on outside of fan cabinet.
7. Motor Mount: Adjustable base.
8. Shaft Bearings: Radial, self‐aligning bearings.
a. Ball‐Bearing Rating Life: ABMA 9, L10 of 100,000 hours.
b. Extend lubrication lines to outside of casing and terminate with grease fittings.
Accessories: 1. Comply (with Counter Flanges with Collar).
1. Companion Flanges: Rolled flanges of same material as housing. 2. Comply.
2. Inspection Door: Bolted door allowing limited access to internal parts of fan, of 3. Comply.
same material as housing. 4. Not Applicable for Axial Fans.
3. Propeller Access Section Door: Short duct section bolted to fan inlet and outlet 5. Comply.
allowing access to internal parts of fan for inspection and cleaning, of same material 6. Comply.
as housing. 7. Under Contractor's Scope.
4. Swingout Construction: Assembly allowing entire fan section to swing out from 8. Noted (Upon Request).
duct for cleaning and servicing, of same material as housing. 9. Noted (Upon Request).
5. Mounting Clips: Horizontal ceiling clips welded to fan housing, of same material as 10. Under Contractor's Scope.
housing. 11. Not Applicable for Direct Driven Fans.
6. Horizontal Support: Pair of supports bolted to fan housing, of same material as
housing.
E 7. Vertical Support: Short duct section with welded brackets bolted to fan housing,
of same material as housing.
8. Inlet Screen: Wire‐mesh screen on fans not connected to ductwork, of same
material as housing.
9. Outlet Screen: Wire‐mesh screen on fans not connected to ductwork, of same
material as housing.
10. Backdraft Dampers: Butterfly style, for mounting with flexible connection to the
discharge of fan or direct mounted to the discharge diffuser section, of same
material as housing.
(For parking ventilation axial fans: In case Motorized smoke damper/Motorized
damper provided as per design drawings, Backdraft damper to be cancelled).
11. Stall Alarm Probe: Sensing probe capable of detecting fan operation in stall and
signaling control devices.
12. Under Contractor's scope. For 16, 17 and 18 = All axial fans
13. Not Applicable for Direct Driven Fans. are provided with counter flanges
12. Flow Measurement Port: Pressure measurement taps installed in the inlet of fan 14. Not required, Since motor is TEFC type. with collar for easy duct
to detect and signal airflow readings to temperature‐control systems. Control 15. Applicable, for free intake only. connection.
devices and sequence of operation are specified in Section 230923.14 "Flow 16. Applicable, for free intake only.
Instruments" and Section 230993.11 "Sequence of Operations for HVAC DDC." 17. Applicable, for free intake only.
18. Applicable, for free discharge only.
13. Shaft Seal: Elastomeric seal and Teflon wear plate, suitable for up to 300 deg F 19. Under Contractor's Scope.
(148 deg C).
14. Motor Cover: Cover with side vents to dissipate motor heat, of same material as
housing.
15. Inlet Vanes: Adjustable; with peripheral control linkage operated from outside of
airstream, bronze sleeve bearings on each end of vane support, and provision for
manual or automatic operation, of same material as housing.
16. Inlet Bell: Curved inlet for when fan is not attached to duct, of same material as
housing.
19. Stack Cap: Vertical discharge assembly with backdraft dampers, of same material
as housing.
20. Direct‐Driven Units: Encase motor in housing outside of airstream, factory wired
to disconnect switch located on outside of fan housing. Extend lubrication lines to Not Applicabe.
outside of casing and terminate with grease fittings.
F. Factory Finishes:
1. Sheet Metal Parts: Prime coat before final assembly.
2. Exterior Surfaces: Baked‐enamel finish coat after assembly. All Vane Axial fans are Hot Dip
F Comply.
3. Coatings: Hot‐dip galvanized. Galvanised Casing.
a. Apply to finished housings.
b. Apply to fan wheels.
A. Description: Fans shall be axial flow, jet impulse type, especially designed for
A Comply.
ventilation of car parks, unidirectional, two speed, and silent operation.
Housing: Consist of inner and outer tube, motor flange and guide blade assembly.
Fan housing is to be manufactured from mild steel to ISO 3574, grade HR 14 or
B Comply.
equivalent. The housing assembly is to be hot dip galvanized in accordance with ISO
1461.
Motor: Squirrel type reversible single speed, 50 Hz rating, pad mounted, with
selflubricating ball bearings of L10 life, continuously air stream rated and complying Comply with Class H insulation
G Comply.
fully with IEC 60034‐1, Class F insulation. The motor shall be suitable for handling (Superior).
smoke laden air at 300 deg. C for 2 hours.
Finish: The complete fan is to be painted after degreasing, with one coat of mordant
wash followed by one coat of epoxy prime and one coat of epoxy thick layer and
I finish paint Polyurethane to give a total mean dry film thickness of 70‐180 microns. Comply.
Color to be agreed
by the Engineer.
The contractor shall perform CFD modelling for the design based on the actual
J approved equipment, layouts, and installation to confirm that the system Noted.
performance meet design intent and authority have jurisdiction.
2.4 MOTORS
Refer to Section "Common Motors Requirements for HVAC Equipment" for general
A Comply.
requirements for factory‐installed motors.
B Motor Construction: NEMA MG 1, general purpose, continuous duty, Design B. Comply. Comply with IEC Standard.
Fans used for smoke extract shall be UL listed and shall be suitable for high All Smoke Fans are APPLUS Certified.
B temperature application as per design requirements or equivalent European Comply. Refer attached certificates in
standard. submittal.
Noise level of fans shall not exceed noise level specified for location of installation.
C Comply.
The overall efficiency shall be minimum 60%.
PART 3 ‐ EXECUTION
3.1 EXAMINATION
Examine areas and conditions for compliance with requirements for installation
A tolerances and other conditions affecting performance of the fans. Do not proceed Under Contractor's scope.
with installation until unsatisfactory conditions have been corrected.
3.2 INSTALLATION
Suspend units from structure using threaded steel rods, vibration isolation springs
C and seismic restraints. Vibration‐control devices are specified in Section "Vibration Comply.
and Seismic Controls for HVAC Piping and Equipment."
D Install units with clearances for service and maintenance. Under Contractor's scope.
3.3 CONNECTIONS
3.5 ADJUSTING
A Adjust damper linkages for proper damper operation. Under Contractor's scope.
Since Fans are Direct Driven Axial
B Adjust belt tension. Not Applicable.
Type.
Proposed Motor bearing are
C Lubricate bearings. Not Applicable.
sealed for life.
3.6 CLEANING
After completing installation, inspect exposed finish. Remove burrs, dirt, and
A construction debris, and repair damaged finishes including chips, scratches, and Under Contractor's scope.
abrasions.
Clean fan interiors to remove foreign material and construction debris. Vacuum
B Under Contractor's scope.
clean fan wheel and cabinet.
3.7 COMMISSIONING
Final Checks before Startup: Perform the following operations and checks before
Comply as Noted. Under Contractor's scope.
startup, and report results in writing:
1. Verify that shipping, blocking, and bracing are removed. Comply as Noted. Under Contractor's scope.
2. Verify that unit is secure on mountings and supporting devices and that
connections for piping, ducts, and electrical components are complete. Verify that Comply as Noted. Under Contractor's scope.
proper thermal‐overload protection is installed in motors, starters, and disconnects.
A 3. Perform cleaning and adjusting specified in this Section. Comply as Noted. Under Contractor's scope.
4. Disconnect fan drive from motor, verify proper motor rotation direction, and
verify fan wheel free rotation and smooth bearings operation. Reconnect fan drive Comply as Noted. Under Contractor's scope.
system, align and adjust belts, and install belt guards.
5. Verify lubrication for bearings and other moving parts. Comply as Noted. Under Contractor's scope.
6. Verify that manual and automatic volume control and fire and smoke dampers in
Comply as Noted. Under Contractor's scope.
connected ductwork systems are in the fully open position.
Starting procedures for fans are as follows: Comply as Noted. Under Contractor's scope.
1. Energize motor; verify proper operation of motor, drive system, and fan wheel.
B Comply as Noted. Under Contractor's scope.
Adjust fan to indicated RPM.
2. Measure and record motor voltage and amperage. Comply as Noted. Under Contractor's scope.
Refer to Section "Testing, Adjusting, and Balancing for HVAC" for procedures for
C Comply as Noted. Under Contractor's scope.
airhandling‐system testing, adjusting, and balancing.
Replace or adjust fan and motor pulleys as required to achieve design conditions. Fix
D Comply as Noted. Under Contractor's scope.
in final position after balancing is achieved.
3.8 DEMONSTRATION
Train Employer's maintenance personnel to adjust, operate, and maintain axial fan
A Comply
units. Refer to Division 1.
Fan Compliance Sheet
Date: Consultant: Dar
Project: Central Business District of the new administration Capital (C01&04) Contractor: China State Construction
Drawings and general provisions of the Contract, including Conditions of Contract and
A Under Contractor's scope.
Division 1 Specification Sections, apply to this Section.
1.2 SUMMARY
1.4 SUBMITTALS
Product Data including rated capacities of each unit, weights (shipping, installed, and
operating), furnished specialties, accessories, and the following: 1. Comply.
1. Certified fan performance curves with system operating conditions indicated. 2. Comply.
A 2. Certified fan sound power ratings. 3. Comply.
3. Motor ratings and electrical characteristics plus motor and electrical accessories. 4. Comply.
4. Material gages and finishes, including color charts. 5. Under Contractor's Scope.
5. Dampers, including housings, linkages, and operators.
Coordination Drawings, including floor plans and sections drawn accurately to scale.
Submit with Shop Drawings. Show fan room layout and relationships between
C components and adjacent structural and mechanical elements. Show support Under Contractor's scope.
locations, type of support, and weight on each support. Indicate and certify field
measurements.
D Field quality-control test reports. Comply. Please refer submittal.
Operation and Maintenance Data: For centrifugal fans to include in emergency, Please refer provided submittal
E Comply.
operation, and maintenance manuals. for O&M Manual.
1.5 QUALITY ASSUARANCE
AMCA Compliance: Provide products that meet performance requirements and are
B Comply. Please refer Technical Datasheet.
licensed to use the AMCA Seal.
NEMA Compliance: Motors and electrical accessories shall comply with NEMA
C Comply. As per IEC standard.
standards.
If the Contractor believes there are conflicts or missing information in the project
documents, the Contractor shall promptly request clarification and instruction from
D the design team before the bids opening, otherwise the Contactor shall furnish and Under Contractor's scope.
handover the works at no additional cost to the Contract and according to Engineer
instructions.
1.6 DELIVERY, STORANGE AND HANDLING
Disassemble and reassemble units as required for movement to the final location
B Under Contractor's scope.
following manufacturer's written instructions.
Refer O&M Manual, attached in
C Lift and support units with the manufacturer's designated lifting or supporting points. Comply.
submittal.
1.7 COORDINATION AND SCHEDULING
A Coordinate size and location of structural-steel support members. Noted. Under Contractor's Scope.
Coordinate size and location of concrete bases. Cast anchor-bolt inserts into bases.
B Noted. Under Contractor's Scope.
Concrete, reinforcement, and formwork requirements are specified in Division 03.
Warranty should indicate the specific Part number and Serial Number (where
2 applicable) of the materials and elements which will be installed in the Project and Comply.
covered by the said warrantee in the final version.
Provide system warranty in which Manufacturer, Installer, and Contractor are jointly
3 and severally liable and agree to repair or replace defective components of the Comply.
warranted item.
PART 2 - PRODUCTS
2.1 CENTRIFUGAL FANS
Fans shall be rated in accordance with Air Movement and Control Association Inc.
AMCA standard procedures, and shall bear the manufacturers test certification. Fans
A shall be Class I, II or III as based on both operating pressures and maximum tip speed. Comply
Outlet velocities shown are maximum. Units shall be of manufacture as noted on
plans.
All blades shall be air foil, or backwardly inclined from the direction of rotation for non-
overloading power characteristic. Wheels shall be both statically and dynamically
B balanced after assembly, and accurately aligned before shipment. The Contractor shall Comply
check for alignment and correct any misalignment occurring during shipment. Blades
shall be continuously welded to hub plate and inlet rim.
Shafts shall be of SAE 1040 hot rolled steel, accurately turned ground and polished.
C Fans shall be sized so that the maximum speed for any given class is no more than 80% Comply
of the first speed.
Fan housing shall be of air tight construction with the side sheets fastened to the scroll
sheets either by a lock seam or a continuous weld. Fan outlet shall have a rolled,
sloping type cut-off to minimize air pulsation at the discharge velocity. On double
D width fans, a double sloping "Vee-type" cut-off shall be provided. Fan inlet cone shall Comply
be of one piece construction, spun and contoured to smoothly match the inlet rim of
the fan wheel inlet, and discharge duct collars shall be drilled or punched at regular
intervals or flanged to facilitate connection of duct work.
Bearings shall be precision anti-friction, pillow block, either ball or rolled type, and
shall be selected based on an average minimum life of 100,000 full-load hours.
E Comply
Extended oilers shall be provided where bearings are inaccessible due to fan
arrangement or ductwork.
The fans are to be driven with V-belt drive, sized at 1.5 times the motor kw and shall
be capable of varying the fan speed 10% higher or lower than at the rating point.
Sheaves shall be adjustable ratio type, they shall be sized to give the required fan
speed with motor sheave at the middle of its range of adjustment. Each drive over one
F kw shall have at least two (2) belts. Below one kw, drive may be single belt, sized at Comply
2.0 times the motor power output.
Belt guards with opening for RPM readings to be provided for all sheaves and belts.
Submit drive data for approval. Provide additional adjustable sheaves at no extra cost,
if required for balancing.
1. Secure vibration and seismic controls to concrete bases using anchor bolts cast in
Under Contractor's scope.
concrete base.
B Install ducts adjacent to fans to allow service and maintenance. Under Contractor's scope.
Install line-sized piping from scroll drain connection, with trap with seal equal to 1.5
C Under Contractor's scope.
times specified static pressure, to nearest floor drain.
Ground equipment according to Division 26 Section "Grounding and Bonding for
D Under Contractor's scope.
Electrical Systems."
Perform the following field tests and inspections and prepare test reports:
1. Verify that shipping, blocking, and bracing are removed.
2. Verify that unit is secure on mountings and supporting devices and that connections
to ducts and electrical components are complete. Verify that proper thermal-overload
protection is installed in motors, starters, and disconnect switches.
3. Verify that cleaning and adjusting are complete.
4. Disconnect fan drive from motor, verify proper motor rotation direction, and verify
fan wheel free rotation and smooth bearing operation. Reconnect fan drive system,
A align and adjust belts, and install belt guards. Under Contractor's scope.
5. Adjust belt tension.
6. Adjust damper linkages for proper damper operation.
7. Verify lubrication for bearings and other moving parts.
8. Verify that manual and automatic volume control and fire and smoke dampers in
connected ductwork systems are in fully open position.
9. Refer to Division 23 Section "Testing, Adjusting, and Balancing for HVAC" for
testing, adjusting, and balancing procedures.
10. Remove and replace malfunctioning units and retest as specified above.
Test and adjust controls and safeties. Replace damaged and malfunctioning controls
B Under Contractor's scope.
and equipment.
3.4 DEMONSTRATION
Engage a factory-authorized service representative to train Owner's maintenance
A personnel to adjust, operate, and maintain centrifugal fans. Refer to Division 01 Comply
Section "Demonstration and Training."
Fan Compliance Sheet
Date: Consultant: Dar
Project: Central Business District of the new administration Capital (C01&04) Contractor: China State Construction
Drawings and general provisions of the Contract, including Conditions of Contract and
A Under Contractor's scope.
Division 1 Specification Sections, apply to this Section.
1.2 SUMMARY
This Section includes the following:
1. Utility set fans.
2. Centrifugal roof ventilators.
A. Noted.
3. Axial roof ventilators.
A B. Technical Submittal has already
4. Upblast propeller roof exhaust fans.
been submitted seperately.
5. Centrifugal wall ventilators.
6. In-line ventilators.
7. In-line centrifugal fans.
Products furnished, but not installed, under this Section include roof curbs for roof-
B Noted.
mounted exhaust fans.
1.3 PERFORMANCE REQUIREMENTS
A Project Altitude: Base air ratings on actual site elevations. Comply.
Fan Unit Schedule: Performance requirements and data are described in equipment
C Comply.
schedule(s) on the Drawings.
Performance Criteria:
1. The fan schedule shows cubic feet per minute (CFM) and design static pressure.
2. Provide fans and motors capable of stable operation at design conditions and at ll0
percent pressure but not to exceed 185 Pa (3/4-inch) additional pressure. 1. Comply.
3. Lower than design pressure drop of approved individual components may allow use 2. Comply.
D
of a smaller fan motor and still provide the safety factor. When submitted as a 3. Comply.
deviation a smaller motor may be approved in the interest of energy conservation. 4. Comply.
4. Select fan operating point as follows:
a. Forward curved and axial fans: Right hand side of peak pressure point.
b. Airfoil, backward inclined or tubular: Near the peak of static efficiency.
Safety Criteria: Provide manufacturer's standard screen on fan inlet and discharge
E Comply.
exposed to operating and maintenance personnel.
All fan bearings, where applicable, shall be of heavy duty type suitable for continuous
F Comply.
operation.
1.4 SUBMITTALS
Product Data including rated capacities of each unit, weights (shipping, installed, and
operating), furnished specialties, accessories, and the following: 1. Comply.
1. Certified fan performance curves with system operating conditions indicated. 2. Comply.
A 2. Certified fan sound power ratings. 3. Comply.
3. Motor ratings and electrical characteristics plus motor and electrical accessories. 4. Comply.
4. Material gages and finishes, including color charts. 5. Under Contractor's Scope.
5. Dampers, including housings, linkages, and operators.
Electrical Component Standard: Provide components that comply with NFPA 70 and
A Comply. As per IEC standard.
that are listed and labeled by UL where available.
Listing and Labeling: Provide electrically operated fixtures specified in this Section that
B are listed and labeled. Comply. Please refer Technical Datasheet.
1. The Terms "Listed" and "Labeled": As defined in NFPA 70, Article 100.
AMCA Compliance: Provide products that meet performance requirements and are
C Comply.
licensed to use the AMCA Seal.
NEMA Compliance: Provide components required as part of fans that comply with
D Comply. As per IEC standard.
applicable NEMA standards.
E UL Standard: Provide power ventilators that comply with UL 705. Noted. Comply with AMCA certified fans.
Do not operate fans until ductwork is clean, filters are in place, bearings are
B Noted. Under Contractor's Scope.
lubricated, and fans have been commissioned.
1.7 COORDINATION AND SCHEDULING
Coordinate the size and location of concrete housekeeping pads. Cast anchor-bolt
A inserts into pad. Concrete reinforcement and formwork requirements are specified in Noted. Under Contractor's Scope.
Section "Cast-in-Place Concrete."
B Coordinate the size and location of structural steel support members. Noted. Under Contractor's Scope.
Coordinate the installation of roof curbs, equipment supports, and roof penetrations.
C Noted. Under Contractor's Scope.
Roof specialties are specified in Division 7 Sections.
1.8 EXTRA MATERIALS
Furnish extra materials described below that match products installed and that are
packaged with protective covering for storage and identified with labels describing
A Comply.
contents.
1. Belts: One set(s) for each belt-driven unit.
1.9 WARRANTY
Manufacturer's Warranty: Provide written warranty, signed by manufacturer agreeing
A to repair or replace components of the HVAC power ventilators that fail in materials or Comply.
workmanship within specified warranty period.
Provide system warranty in which Manufacturer, Installer, and Contractor are jointly
B and severally liable and agree to repair or replace defective components of the Comply.
warranted item.
Warranty shall include:
1. Defective materials and installation.
2. Failure to comply with requirements stated in technical specifications.
3. Structural failures including, but not limited to, excessive deflection.
4. Faulty operation of movable parts such as hardware.
5. Deterioration of metals, metal finishes, and other materials beyond normal
C Comply.
weathering and use.
6. Delamination of exterior or interior facing materials.
7. Making good and installation and finishing all items that are disturbed and that may
be required due to repair or replacement of defective items. Coordinate with
Employer, manufacturer, and installer of adjacent disturbed items to ensure that their
warranty is not cancelled due to the repair work.
General
1. Performance data for all fans and spare parts shall be determined in accordance
with the provisions of ASHRAE 51.
2. Sound pressure level ratings of ducted fans shall comply with AMCA 301 and shall
be the result of tests made in accordance with AMCA 300.
3. Sound pressure level ratings of non-ducted fans shall comply with AMCA 301 and
shall be the result of tests made in accordance with AMCA 300. Application of sound
A Comply.
pressure level ratings shall conform to AMCA 302. Unit construction shall conform to
applicable standards contained in AMCA 99 and to requirements specified.
4. Safety provisions for power transmission equipment and non-ducted inlets and
outlets shall include guards and screens, unless other provisions are required, and
shall be constructed in accordance with applicable provisions of ANSI B11.19.
Installation shall be such that fan vibration-isolation provisions are not negated.
5. Fan wheels shall be statically and dynamically balanced at the factory.
Bearings
1. Bearings shall be antifriction ball or roller type, unless otherwise specified, with
provisions for self-alignment and thrust-load requirements that may be imposed by
the service.
2. Bearings shall be constructed of vacuum degassed or processed steel alloys and
shall have a certified ABMA 9, L-10 minimum life expectancy rating of 200,000 hours.
Bearings shall have dusttight seals suitable for lubricant pressures encountered.
Housings shall be cast iron unless otherwise specified or approved.
3. Bearings shall be grease lubricated. Lubrication provisions shall preclude
overheating due to excess lubricant. Grease supply fittings shall be surface ball check
C type. Where necessary, manual or automatic grease pressure relief fittings shall be Comply.
provided. Bearing and seal construction permitting, relief fittings shall be located on
the side opposite the supply fitting. Relief fittings shall be visible from normal
maintenance locations. Lubrication provisions shall include extension tubes where
necessary.
4. Bearings shall be dowelled in place with AISI 18-8 corrosion-resistant steel spiral
wrapped or split pins, unless otherwise specified or approved. Taper pins are not
acceptable.
5. Factory sealed antifriction bearings which conform to above specified materials and
ABMA 9, L-10 life expectancy requirements shall be provided for fans driven by motors
with a power rating of smaller than 1/2 horsepower (375 watt)
Drives:
1. Fan drives shall be V-belt type.
2. V-belt drive application shall conform to the manufacturer's published
recommendations.
3. Horsepower (Wattage) rating of drive shall be based on maximum pitch diameter of
sheave.
4. Drives with motors up to and including 10 horsepower (7500 watt) shall be standard
belt section, variable sheave type, with a service factor of not less than 1.2.
5. Drives with motors over 10 horsepower (7500 watt) and up to and including 40
D horsepower (30 kilowatt of power) shall be standard section, fixed-sheave or variable- Comply.
sheave type, with a service factor of not less than 1.2.
6. Drives with motors over 40 horsepower (30 kilowatt of power) shall be fixed-
sheave, high-capacity, supertype, with a service factor of not less than 1.2.
7. Belt drives shall be located outboard of bearings. Drive and driven shafts shall be
aligned by the four-point method.
8. Belt tension shall be adjusted in accordance with the manufacturer's
recommendations.
9. Alignment and final belt tensioning shall be performed in the presence of the
Engineer.
Belts:
1. Belts shall be endless, of Dacron-reinforced elastomer construction, with cross
section to suit sheave grooves.
E Comply.
2. Belts shall be matched and measured on a belt-matching machine at the factory.
Selection by code numbers, sag numbers, or match numbers is not acceptable. Each
belt set shall be bound with wire and tagged with equipment identification.
2.2 UTILITY SET FANS
Description: Belt-driven centrifugal fans consisting of housing, wheel, fan shaft,
A Comply.
bearings, motor, drive assembly, and accessories.
Housings: Fabricated of steel with side sheets fastened with a deep lock seam or
B welded to scroll sheets. Comply.
1. Housings Discharge Arrangement: Adjustable to 8 standard positions.
Fan Wheels: Single width, single inlet, welded to cast-iron or cast-steel hub and spun-
steel inlet cone, with hub keyed to shaft.
C 1. Blade Materials: Steel. Comply.
2. Blade Type: Die formed, backward inclined or forward curved, as scheduled.
3. Spark-Resistant Construction: AMCA 99.
D Fan Shaft: Turned, ground, and polished steel keyed to wheel hub. Comply.
Shaft Bearings: Prelubricated and sealed, self-aligning, pillow-block-type ball bearings
E Comply.
with AFBMA 9, L-50 of 200,000 hours.
Belt Drives: Factory mounted, with final alignment and belt adjustment made after
installation.
1. Service Factor Based on Fan Motor: 1.2.
1. Comply
2. Motor Pulleys: Adjustable pitch. Select pulley so pitch adjustment is at the middle of
2. Comply with fixed pitch
F the adjustment range at fan design conditions.
3. Comply
3. Belts: Oil resistant, nonsparking, and nonstatic; matched sets for multiple belt
4. Not Applicable
drives.
4. Belt Guards: Fabricate of steel for motors mounted on the outside of the fan
cabinet.
Accessories: The following accessories are required as indicated:
1. Backdraft Dampers: Gravity actuated with counterweight and interlocking
aluminumblades and felt edges in steel frame installed on fan discharge.
1. Contractor scope
2. Access Doors: Gasketed doors with latch-type handles.
2. Contractor scope
3. Scroll Dampers: Single-blade damper installed at fan scroll top with adjustable
3. Not applicable
linkage.
G 4. Not applicable
4. Spark-Resistant Construction: AMCA 99 construction, as indicated.
5. Not applicable
5. Inlet Screens: Removable wire mesh.
6. Contractor scope
6. Drain Connections: DN20 (3/4-inch) threaded coupling drain connection installed at
7. Contractor scope
lowest point of housing.
7. Weather Hoods: Weather resistant with stamped vents over motor and drive
compartment.
2.3 CENTRIFUGAL ROOF VENTILATORS
Description: Belt-driven or direct-drive centrifugal fans, as indicated, consisting of
A housing, wheel, fan shaft, bearings, motor and disconnect switch, drive assembly, curb Not part of submittal.
base, and accessories.
Housing: Removable, spun-aluminum, dome top and outlet baffle; square, one-piece,
B Not part of submittal.
aluminum base with venturi inlet cone.
Housing: Removable, galvanized steel, mushroom-domed top; square, one-piece,
C Not part of submittal.
hinged, aluminum base with venturi inlet cone.
D Fan Wheels: Aluminum hub and wheel with backward-inclined blades. Not part of submittal.
Belt-Driven Drive Assembly: Resiliently mounted to the housing, with the following
features:
1. Fan Shaft: Turned, ground, and polished steel drive shaft keyed to wheel hub.
E 2. Shaft Bearings: Permanently lubricated, permanently sealed, self-aligning ball Not part of submittal.
bearings.
3. Pulleys: Cast-iron, adjustable-pitch motor pulley.
4. Fan and motor isolated from exhaust air stream.
Belt-Driven Drive Assembly: Resiliently mounted to the housing, with the following
features:
1. Fan Shaft: Turned, ground, and polished steel drive shaft keyed to wheel hub.
E Not Applicable Fans are direct driven
2. Shaft Bearings: Permanently lubricated, permanently sealed, self-aligning ball
bearings.
3. Pulleys: Cast-iron, adjustable-pitch motor pulley.
Description: In-line, belt-driven or direct-drive centrifugal fans, as indicated, consisting Refer fan proposed accessories
A of housing, wheel, outlet guide vanes, fan shaft, bearings, drive assembly, motor and Comply. section in submittal to check the
disconnect switch, mounting brackets, and accessories. accessories proposed by Dynair.
Sound Power Level Ratings: Comply with AMCA 301, "Methods for Calculating
Fan Sound Ratings From Laboratory Test Data." Test fans according to AMCA 300, Refer AMCA Certicate attached in
1 Comply.
"Reverberant Room Method for Sound Testing of Fans." Label fans with the AMCA the submittal.
Seal.
Fan Performance Ratings: Establish flow rate, pressure, power, air density, speed of
Refer AMCA Certicate attached in
2 rotation, and efficiency by factory tests and ratings according to AMCA 210, Comply.
the submittal.
"Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating."
All Smoke Fans are APPLUS
Fans used for smoke extract shall be UL listed and suitable for high smoke
Certified.
B temperature of 260 deg. C (500 deg. F) for a minimum of three hours continuous Comply.
Refer attached certificates in
operation
submittal.
Noise level of fans shall not exceed noise level specified for location of installation.
C Comply.
The overall efficiency shall be minimum 60%.
Fans utilized for kitchen extract shall be spark-resistant and suitable for kitchen
operation. Fans shall be UL and cUL listed for grease removal, tested under high
temperature exhaust of 190 deg. C (375 deg. F). Fans shall be tested in accordance
with relevant NFPA standard. Fan coating shall be as directed by the Engineer. Units
shall include the following:
1. Bolted access door.
D Not part of submittal.
2. Drain connection.
3. Aluminum grease trap.
4. Weatherhood.
5. Upblast discharge.
6. Windband discharge cap with gravity damper.
7. Outlet guard where fan discharge is accessible.
PART 3 - EXECUTION
3.1 EXAMINATION
Examine areas and conditions for compliance with requirements of installation
O&M Manual attached in
A tolerances and other conditions affecting performance of the power ventilators. Do Noted.
Submittal.
not proceed with installation until unsatisfactory conditions have been corrected.
3.2 INSTALLATION
O&M Manual attached in
A Install power ventilators according to manufacturer's written instructions. Noted.
Submittal.
Support units using the vibration-control devices indicated. Vibration-control devices
are specified in Section "Vibration and Seismic Controls for HVAC Piping and
Equipment."
1. Support utility set fans on concrete housekeeping bases or roof supports using
housed spring isolators. Secure units to anchor bolts installed in housekeeping base.
B 2. Secure roof-mounted fans to roof curbs with cadmium-plated hardware. Under Contractor's scope.
a. Installation of roof curbs is specified in Division 7 Sections.
3. Suspend units from structural steel support frame using threaded steel rods,
vibration isolation springs, and seismic restraints.
4. Ceiling Units: Suspend units from structure using threaded rods or metal straps, and
neoprene washers.
C Install units with clearances for service and maintenance. Under Contractor's scope.
Label units according to requirements specified in Section "Identification for HVAC
D Under Contractor's scope.
Piping and Equipment."
3.3 HOUSEKEEPING BASES
Construct concrete housekeeping pads as follows:
1. Coordinate size of housekeeping bases with actual unit sizes provided. Construct
base 100 mm larger, in both directions, than the overall dimensions of the supported
unit.
2. Form concrete pads with steel channels conforming to ASTM A 36/A 36M, size and
location as indicated. Miter and weld corner and provide cross bracing. Anchor or key
to floor slab.
A Under Contractor's scope.
3. Install reinforcing bars, tied to frame, and place anchor bolts and sleeves to
facilitate securing units.
4. Place concrete and allow to cure before installing units. Use portland cement
conforming to ASTM C 150/C 150M, 27-MPa compressive strength, and normalweight
aggregate.
5. Clean exposed steel form according to SSPC Surface Preparation Specifications SP 2
or SP 3 and apply 2 coats of rust-preventive metal primer and paint.
3.4 CONNECTIONS
Duct installation and connection requirements are specified in other Sections.
A Drawings indicate the general arrangement of ducts and duct accessories. Make final Under Contractor's scope.
duct connections with flexible connectors.
B Electrical: Conform to applicable requirements in Division 26 Sections. Under Contractor's scope.
Grounding: Ground equipment. Tighten electrical connectors and terminals, including
grounding connections, according to manufacturer's published torque-tightening
C Under Contractor's scope.
values. Where manufacturer's torque values are not indicated, use those specified in
UL 486A - 486B.
3.5 FIELD QUALITY CONTROL
A Adjust damper linkages for proper damper operation. Under Contractor's scope.
B Adjust belt tension. Under Contractor's scope.
C Lubricate bearings. Under Contractor's scope.
3.7 CLEANING
After completing installation, inspect exposed finish. Remove burrs, dirt, and
A construction debris, and repair damaged finishes including chips, scratches, and Under Contractor's scope.
abrasions.
Clean fan interiors to remove foreign material and construction debris. Vacuum clean
B Under Contractor's scope.
fan wheel and cabinet.
3.8 COMMISSIONING
Final Checks before Startup: Perform the following operations and checks before
startup, and report results in writing:
1. Verify that shipping, blocking, and bracing are removed.
2. Verify that unit is secure on mountings and supporting devices and that connections
for piping, ducts, and electrical components are complete. Verify that proper thermal-
overload protection is installed in motors, starters, and disconnects.
3. Perform cleaning and adjusting specified in this Section.
A 4. Disconnect fan drive from motor, verify proper motor rotation direction, and verify Under Contractor's scope.
fan wheel free rotation and smooth bearing operation. Reconnect fan drive system,
align and adjust belts, and install belt guards.
5. Lubricate bearings, pulleys, belts, and other moving parts with factory-
recommended lubricants.
6. Verify that manual and automatic volume control and fire and smoke dampers in
connected ductwork systems are in the fully open position.
7. Disable automatic temperature-control operators.
Starting procedures for fans are as follows:
1. Energize motor; verify proper operation of motor, drive system, and fan wheel.
B Under Contractor's scope.
Adjust fan to indicated RPM.
2. Measure and record motor voltage and amperage.
C Shut unit down and reconnect automatic temperature-control operators. Under Contractor's scope.
Refer to Section "Testing, Adjusting, and Balancing for HVAC" for procedures for
D Under Contractor's scope.
airhandling- system testing, adjusting, and balancing.
Replace or adjust fan and motor pulleys as required to achieve design conditions. Fix
E Under Contractor's scope.
in final position after balancing is achieved.
3.9 DEMONSTRATION
Train Employer's maintenance personnel to adjust, operate, and maintain power
A ventilator units. Refer to Division 1 Section "Demonstration and Training part of Comply
Closeout Procedures."
Fan Compliance Sheet
Date: 22-06-2021 Consultant: Dar
Project: Central Business District of the new administration Capital (C01&04) Contractor: China State Construction
Drawings and general provisions of the Contract, including Conditions of Contract and
A Comply.
Division 1 Specification Sections, apply to this Section.
1.2 SUMMARY
A. This Section includes basic requirements for factory-installed and field-installed motors.
1.3 SUBMITTALS
Product Data: Show nameplate data and ratings; characteristics; mounting arrangements;
A size and location of winding termination lugs, conduit entry, and grounding lug; and Comply.
coatings.
Field Test Reports: Indicate and interpret test results for compliance with performance
C Not Applicable.
requirements.
PART 2 - PRODUCTS
2.1 BASIC MOTOR REQUIREMENTS
A Basic requirements apply to mechanical equipment motors, unless otherwise indicated. Comply.
Service Factor: 1.15 according to NEMA MG1 or shall be duty type S1 - continuous running
duty to IEC 60034-1, unless otherwise indicated. Motors used for excessive intermittent
H Comply.
periodic operation shall be suitably designed for the expected number of starts. Motors’
dimensions shall comply with NEMA MG1 or IEC 60072 as applicable.
Capacity and Torque Characteristics: Rated for continuous duty and sufficient to start,
accelerate, and operate connected loads at designated speeds, in indicated environment,
I Comply.
with indicated operating sequence, and without exceeding nameplate ratings or
considering service factor.
Low Voltage Motors’ Enclosure: Totally enclosed, fan-cooled type (TEFC) to NEMA MG1 or
J IC 411 to IEC 60034-6 as applicable, unless otherwise indicated or recommended by Comply.
manufacturer and approved by the Engineer.
Medium Voltage Motors’ Enclosures: Totally enclosed, air to air cooled (TEAAC) to NEMA
MG1 or IC 611 to IEC 60034-6 as applicable or totally enclosed, water to air cooled
K (TEWAC) to NEMA MG1 or IC 817 to IEC 60034-6 as applicable. Enclosure type shall be as Comply.
recommended by manufacturer and approved by the Engineer, unless otherwise
indicated.
Degree of Protection (IP): Motors shall be IP55 to IEC 60034 for outdoor use and IP54 to
L Comply.
IEC 60034 for indoor motors as a minimum.
Temperature Rise: Shall comply with class F insulation and temperature rise class B or Shall
not exceed 80 deg. C based on 50 deg. C (122 deg. F) ambient temperature, unless
M otherwise indicated or recommended by manufacturer and approved by the Engineer for Comply.
specific applications such as: overhead cranes or submersible pumps, where temperature
rise not exceeding 105 deg. C may be used.
Motors that utilize a Variable Frequency Drive (VFD) shall be inverter duty to NEMA MG1
N or Class I to IEC 60034-18-41 and shall be classified as energy efficiency to NEMA MG1 or Comply.
high efficiency class IE2 to IEC 60034-30.
O Low Voltage Motors Terminal Boxes: Shall have the same motor’s degree of protection. Comply.
Medium Voltage Motors Terminal Boxes: Shall have the same motor’s degree of
protection and shall be designed for differential CT's and/or surge protection (surge
P Comply.
arrestor and surge capacitor). Enough space shall be provided below main terminal box for
cable connection.
Include built-in terminal blocks and built in thermistors PTC100 / RTD200 or PTC for
Q winding protection for all low voltage motors rated 50 HP and above and for all low Comply.
voltage VFD motors.
Include built-in terminal blocks and built in thermistors PTC100 / RTD200 for winding and
R Comply.
bearing protection for all medium voltage motors.
The contractor is responsible for coordination between the motor and motor controller
S Comply.
suppliers to ensure compatibility, proper starting and satisfactory operation.
Description: NEMA MG 1 or IEC 60034-30-1 (IE3) and IEC 60072, induction motor. Comply.
2. Energy-Efficient Design: Premium efficiency to NEMA MG1 or class IE3 to IEC 60034-30,
Comply.
IE2 for motors of less than 0.7 kw unless otherwise indicated.
3. Stator: Copper windings, unless otherwise indicated. Multispeed motors have separate
Comply.
winding for each speed.
A
5. Bearings: Double-shielded, prelubricated ball bearings suitable for radial and thrust
Comply.
loading.
6. Insulation: Unless otherwise indicated, Class F for motors with temperature rise 80 deg.
C and Class H for motors with temperature rise 105 deg. C as indicated in paragraph 2.1 M Comply.
above.
Motors Used with Reduced-Inrush Controllers: Match wiring connection requirements for
indicated controller, with required motor leads brought to motor terminal box to suit
control method. Maximum permissible starting current shall be 5 to 6.3 times the Full
B Comply.
Load Current
(FLC). (NEMA starting code F or G) for motors rated 15 HP and above. For motors rated
below 15HP, starting current shall be as per manufacturer’s recommendations.
1. Critical vibration frequencies are not within operating range of controller output. Comply.
Rugged-Duty Motors: Where indicated, motors are totally enclosed with 1.25 minimum
service factor to NEMA MG1, greased bearings, integral condensate drains, and capped
D Comply.
relief vents. Windings are insulated with nonhygroscopic material. External finish is
chemical-resistant paint over corrosion-resistant primer.
E Source Quality Control: Perform the following routine tests according to IEC: Comply.
2. No-load readings of current and speed at rated voltage and frequency. Comply.
5. Alignment. Comply.
Type: As indicated or selected by manufacturer from one of the following, to suit starting
Comply.
torque and other requirements of specific motor application.
B Shaded-Pole Motors: Do not use, unless motors are smaller than 0.037 kW (1/20 hp). Comply.
Bearings: Ball-bearing type for belt-connected motors and other motors with high radial
D forces on motor shaft. Sealed, prelubricated sleeve bearings for other single-phase Comply.
motors.
PART 3 - EXECUTION
3.1 ADJUSTING
A Use adjustable motor mounting bases for belt-driven motors. Not Applicable.
Install power feeders to motors in raceways. Locate raceways close to motor terminal box
D Not Applicable.
and use liquid tight flex for final connection to motor terminal box.
Motors located in classified areas shall be installed in accordance with IEC or NFPA
E Not Applicable.
recommendations for “Hazardous (classified) Locations”.
3.2 COMMISSIONING
Check operating motors for unusual conditions during normal operation. Coordinate with
A Comply.
the commissioning of the equipment for which the motor is a part.
B Take measurements and prepare a log of voltage, current, frequency, and power. Comply.
Static Air Static Motor Motor Motor Outlet Inlet Starting Type of Dynair Response
Wheel/ Air Volume Fan Absorbed Motor Starting Motor Motor Terminal Volt/ Motor VFD Fan Total
S.No. Mark / Tag No. Qty Model Fan Origin pressure Volume Pressure Size Service Motor PF Insulation Fan RPM Velocity db(A) @ Temp. Rating Current Protection as for Protection
Impeller Type (LPS) Power (kW) Origin Mode RPM Enclosure Box IP Phase/Hz Efficiency Compatible Efficiency
(Pa) (LPS) (Pa) (kW) Factor Class (m/s) 3m (Amps) IFC (MCPR/MCCB)
Under Contractor
1 EF‐D01‐BS2‐01 1 BOX‐T 315 Backward Curved UAE 750 500 750 500 0.549 0.75 China DOL 1.2 1400 0.74 F IP55 1785 4.6 61 IP55 415/3/50 ‐ IE3 YES 70.00% 11.78 MCPR
Scope
Under Contractor
2 EF‐D01‐GF‐01 2 BOX‐T 250 Backward Curved UAE 350 250 350 250 0.354 0.37 China DOL 1.2 1400 0.7 F IP55 1625 3.38 55 IP55 415/3/50 ‐ IE3 YES 57% 6.05 MCPR
Scope
Under Contractor
3 EF‐D01‐GF‐02 1 BOX‐T 250 Backward Curved UAE 280 300 280 300 0.164 0.37 China DOL 1.2 1400 0.7 F IP55 1702 2.7 56 IP55 415/3/50 ‐ IE3 YES 51.80% 6.05 MCPR
Scope
Under Contractor
4 SEF‐D01‐MEP‐01 1 BOX‐T‐HT 280 Backward Curved UAE 500 500 500 500 0.633 0.75 China DOL 1.2 1410 0.74 F IP55 2003 3.84 72 IP66 415/3/50 400 @ 2 Hrs IE3 YES 40.2 11.78 MCPR
Scope
Under Contractor
5 SEF‐D01‐RF‐01 1 BOX‐T‐HT 280 Backward Curved UAE 500 500 500 500 0.633 0.55 China DOL 1.2 1410 0.73 F IP55 2003 3.84 72 IP66 415/3/50 400 @ 2 Hrs IE3 YES 40.20% 11.21 MCPR
Scope
Under Contractor
6 SMF‐D01‐RF‐01 1 BOX‐T 315 Backward Curved UAE 850/425 500 850/566 500/222 0.604/0.18 0.8/0.28 China DOL 1 1410/940 NA F IP55 1794/1196 5.21/3.47 62/55 IP55 415/3/50 ‐ IE1 NA 72.70% NA MCPR
Scope
Under Contractor
7 SF‐D01‐MEP‐01 1 BOX‐T‐HT 280 Backward Curved UAE 480 300 480 300 0.345 0.55 China DOL 1.2 1440 0.73 F IP55 1615 3.68 67 IP66 415/3/50 400 @ 2 Hrs IE3 YES 42.80% 8.85 MCPR
Scope
Under Contractor
8 EF‐D01‐BS1‐06 6 VA‐HT‐1400‐523‐9‐9‐7‐29 Die Cast Aluminium UAE 27500 900 28184 945 44.8 54 China Star‐Delta 1.15 1440 0.87 H IP55 1440 17.93 95 IP66 415/3/50 300 @ 2 Hrs IE3 YES 71.40% 621.72 MCCB
Scope
Under Contractor
12 EF‐D01‐BS1‐04 1 BOX‐T 250 Backward Curved UAE 390 300 390 300 0.211 0.37 China DOL 1.2 1400 0.7 F IP55 1786 3.76 58 IP55 415/3/50 ‐ IE3 YES 57.10% 6.05 MCPR
Scope
Under Contractor
13 EF‐D01‐MEP‐02 1 BOX‐T 355 Backward Curved UAE 1985 442 1985 442 1.47 2.2 China DOL 1.2 1440 0.79 F IP55 1856 9.67 67 IP55 415/3/50 IE3 YES 67.20% 34.56 MCCB
Scope
Under Contractor
14 EF‐D01‐BS1‐01 4 CAB‐D 9/7 4P M Forward Curved UAE 160 250 186 339 0.295 0.772 NA NA NA 1449 NA F IP55 1449 3.06 49 IP55 230/1/50 ‐ NA YES NA NA MCPR
Scope
Under Contractor
15 EF‐D01‐BS1‐05 1 CAB‐D 9/7 4P M Forward Curved UAE 70 300 79 379 0.25 0.772 NA NA NA 1460 NA F IP55 1460 1.29 49 IP55 230/1/50 ‐ NA YES NA NA MCPR
Scope
Under Contractor
16 EF‐D01‐GF‐03 1 CAB‐D 9/7 4P M Forward Curved UAE 60 300 68 383 0.248 0.772 NA NA NA 1461 NA F IP55 1461 1.12 49 IP55 230/1/51 ‐ NA YES NA NA MCPR
Scope
Under Contractor
17 EF‐D01‐RF‐01 1 CAB‐D 7/7 4P M Forward Curved UAE 130 250 130 249 0.143 0.324 NA NA NA 1388 NA F IP55 1388 2.71 44 IP55 230/1/52 ‐ NA YES NA NA MCPR
Scope
Under Contractor
18 EF‐D01‐MEP‐01 1 VA‐900‐406‐12‐9‐7‐26 Vane Axial UAE 3360 400 3756 500 3.27 4 China DOL 1.2 1440 0.81 F IP55 1440 5.9 80 IP55 415/3/50 ‐ IE3 YES 59.70% 61.42 MCCB
Scope
Under Contractor
19 EF‐D01‐MEP‐03 1 BOX‐T 250 Backward Curved UAE 300 300 300 300 0.173 0.37 China DOL 1.2 1400 0.7 F IP55 1713 2.89 57 IP55 415/3/50 ‐ IE3 YES 53.00% 6.05 MCPR
Scope
Under Contractor
20 EF‐D01‐MEP‐04 1 BOX‐T 250 Backward Curved UAE 350 250 350 250 0.158 0.37 China DOL 1.2 1400 0.7 F IP55 1625 3.38 55 IP55 415/3/50 ‐ IE3 YES 56.90% 6.05 MCPR
Scope
Under Contractor
21 EF‐D01‐MEP‐05 1 VA‐630‐240‐12‐12‐9‐32 Vane Axial UAE 2170 280 2192 286 1.08 1.5 China DOL 1.2 1440 0.77 F IP55 1440 7.03 72 IP55 415/3/50 ‐ IE3 YES 63.80% 25.2 MCCB
Scope
Under Contractor
22 EF‐D01‐RF‐02 1 VA‐900‐406‐12‐9‐7‐27 Vane Axial UAE 4180 500 4143 491 3.57 4 China DOL 1.2 1440 0.81 F IP55 1440 6.51 80 IP55 415/3/50 ‐ IE3 YES 59.90% 61.42 MCCB
Scope
Under Contractor
23 SF‐D01‐BS1‐01 4 VA‐1250‐406‐12‐9‐7‐47 Vane Axial UAE 24750 700 25004 714 34.7 45 China Star‐Delta 1.2 1475 0.86 F IP55 1789 20.37 91 IP55 415/3/50 ‐ IE3 YES 69.30% 677.68 MCCB
Scope
Under Contractor
26 EF‐D01‐BS1‐02 1 PR‐AC ATX 456 T Backward Curved Italy 440 250 456 269 0.178 0.37 Italy DOL 1 910 0.7 F IP55 1000 2.87 38 IP55 400/3/50 ‐ IE2 YES 70.2 7.535 MCPR
Scope
As per the discussion held with consultant, below are the conditions which was agreed by the consultant, and we followed the same while doing the revised selections:‐
1. In order to meet the rpm criterion of less than 2000 and efficiency of greater than 60%, we have changed the type of some fans, which is from Axial Inline Fan to Centrifugal Inline Fan. (Accepted
by consultant)
2. In some selections, changed the ESP lower than the approved, but as per the CLC, to meet the efficiency Close to 60% or more. (Accepted by consultant)
3. For air flow less than 700 LPS, efficiency less than 60% is accepted by the consultant.
4. For all emergency fans, RPM greater than 2000 is accepted by the consultant.
5. Varition in proposed Airflow and ESP from the Required one, is accepted by the consultant.
Construction Settings
11.0 kW
Total Weight 134 kg 500 1785
ERP Information
ERP Compliance Exempt
Type -
Regulation -
Category of measure -
Selected Accessories
1 x Technopolymer terminal box-IP55
Lw 80 69 81 81 74 72 66 60 86 db
Lp @ 3m 59 49 60 61 54 51 46 40 66 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A B C D E F G H I J
Value [mm] 850 1200 900 405 405 70 70 725 775 100
Fan Class 1
ERP Information
ERP Compliance Exempt
Type -
Regulation -
Category of measure -
Selected Accessories
2 x Technopolymer terminal box-IP55
Lw 83 80 77 73 70 67 64 61 86 db
Lp @ 3m 63 60 56 52 50 47 44 41 66 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A B C D E F G H I J
Value [mm] 700 1000 700 325 325 70 70 600 600 100
Psta (Pa)
Static Pressure 300 Pa
60
Construction Settings 40
Total Weight 97 kg 20
0
Motor selection
SFP (W/l/s)
2
Electrical Supply 415/3/50 1
ERP Information
ERP Compliance Exempt
Type -
Regulation -
Category of measure -
Selected Accessories
1 x Technopolymer terminal box-IP55
Lw 85 78 77 73 72 69 65 61 87 db
Lp @ 3m 64 58 56 53 51 48 44 40 66 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A B C D E F G H I J
Value [mm] 700 1000 700 325 325 70 70 600 600 100
3600 40%
Fan Speed 2003 rpm
Safety Factor 15 %
Motor selection
5.50 kW
Electrical Supply 415/3/50 0 0.750 kW
0 500 1000 1500 2000 2500 3000
Motor Rating 0.75 kW
Q - Volume Flow (l/s)
Energy Class IE3
ERP Information
ERP Compliance Exempt
Type -
Regulation -
Category of measure -
Selected Accessories
1 x Die Cast aluminium terminal box-IP66
Lw 87 91 89 89 88 85 82 76 97 db
Lp @ 3m 66 71 68 69 68 64 62 55 76 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key L H W C D G I F E A B
Value [mm] 1050 800 910 361 361 700 550 1160 70 700 1060
3600 40%
Fan Speed 2003 rpm
Safety Factor 15 %
Motor selection
5.50 kW
Electrical Supply 415/3/50 0 0.750 kW
0 500 1000 1500 2000 2500 3000
Motor Rating 0.75 kW
Q - Volume Flow (l/s)
Energy Class IE3
ERP Information
ERP Compliance Exempt
Type -
Regulation -
Category of measure -
Selected Accessories
1 x Die Cast aluminium terminal box-IP66
Lw 87 91 89 89 88 85 82 76 97 db
Lp @ 3m 66 71 68 69 68 64 62 55 76 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key L H W C D G I F E A B
Value [mm] 1050 800 910 361 361 700 550 1160 70 700 1060
3600 40%
Fan Speed 1615 rpm
Safety Factor 15 %
2100
Construction Settings 500 20%
Total Weight 162 kg 1615
Motor selection
5.50 kW
Electrical Supply 415/3/50 0 0.550 kW
0 500 1000 1500 2000 2500 3000
Motor Rating 0.55 kW
Q - Volume Flow (l/s)
Energy Class IE3
ERP Information
ERP Compliance Exempt
Type -
Regulation -
Category of measure -
Selected Accessories
1 x Die Cast aluminium terminal box-IP66
Lw 82 89 82 86 83 79 77 69 93 db
Lp @ 3m 61 68 61 65 62 58 56 48 72 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key L H W C D G I F E A B
Value [mm] 1050 800 910 361 361 700 550 1160 70 700 1060
Psta (Pa)
Static Pressure 945 Pa
600
Total Pressure 1,136 Pa
Fan Speed 1440 rpm 3rd Duty Point 2nd Duty Point
1st Duty Point
0
Air Properties 1.19kg/m³/ 20°C/ 240m/ 50% RH 60
Pabs (kW)
60
Fan Energy Index (FEI) 1.22 29
40
Construction Settings 20
0
Form of Running B
SFP (W/l/s)
2
Casing length Long
1
Total Weight 999 kg 0
Finish Type Hot-dip galvanized 0 10000 20000 30000 40000 50000
Q - Volume Flow (l/s)
Motor selection
Electrical Supply 415/3/50 Sound Performance
Motor Rating 54 kW Hz 63 125 250 500 1k 2k 4k 8k Overall
Lw 112 111 112 114 111 107 102 96 120 dB
Energy Class IE3
Lw(A) 86 95 103 111 111 108 103 95 116 dB(A)
Full load current 86.35 A
LpA @ 3m 65 75 82 91 91 88 83 74 95 dB(A)
Enclosure/Class IP55 / H
Performance certified is for installation type D, Ducted inlet, Ducted outlet. Performance ratings do not include the effects of
Frame Size 225 S/M appurtenances (accessories). The sound power level ratings shown are in decibels, referred to 10⁻¹² watts, calculated per AMCA
International 301. The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values
Poles number 4 shown are for outlet Lwo and outlet LwoA sound power levels for Installation type D: Ducted inlet, Ducted outlet. Ratings
include the effects of duct end correction. LpA @ 3m – dBA levels are not licensed by AMCA International.
Motor Speed 1440 rpm
Certifications
Maico Gulf certifies that the DYNAIR model are licensed to bear the AMCA
Seal. The ratings shown are based on tests and procedures performed in
accordance with AMCA Publication 211 and AMCA Publication 311 and
comply with the requirements of the AMCA Certified Ratings Program.
Performance certified is for installation type D – Ducted inlet, Ducted outlet.
Performance ratings do not include the effects of appurtenances
(accessories).
Frequency 50 Hz 40 Hz 20 Hz
Lw 112 111 112 114 111 107 102 96 120 dB Lw 107 107 107 110 106 102 97 91 115 dB
LwA 86 95 103 111 111 108 103 95 116 dB(A) LwA 81 90 98 106 106 103 98 90 111 dB(A)
Lw 92 91 92 95 91 87 82 76 100 dB
LwA 66 75 83 91 91 88 83 75 96 dB(A)
LpA @ 3m 45 55 63 71 71 68 63 54 75 dB(A)
Lw 79 78 91 96 95 93 90 85 101 dB Lw 74 73 86 91 90 88 85 81 96 dB
Lw 59 58 71 76 75 73 70 66 81 dB
LwA 33 42 63 73 75 74 71 64 80 dB(A)
LpA @ 3m 12 21 42 53 55 54 50 44 59 dB(A)
Lp @ 3m 92 91 91 94 91 87 82 75 99 db
110 110
100 100
90 90
80 80
70 70
NC-70
Octave Band Sound Pressure Level dB
NC-65
60 60
Noise Criteria
NC-60
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A ØB ØC ØD E F N° Ø H
Value [mm] 1350 1400 1470 1530 850 150 20 16 1620
Psta (Pa)
Static Pressure 904 Pa
500
Total Pressure 1,152 Pa
400
Velocity Pressure 248 Pa
300
Outlet Velocity 20.42 m/s
Fan Speed 1440 rpm 3rd Duty Point 2nd Duty Point
1st Duty Point
0
Air Properties 1.19kg/m³/ 20°C/ 240m/ 50% RH 60
Pabs (kW)
60
Fan Energy Index (FEI) 1.1 49
40
Construction Settings 20
0
Form of Running B
SFP (W/l/s)
4
Casing length Long
2
Total Weight 627 kg 0
Finish Type Hot-dip galvanized 0 5000 10000 15000 20000 25000 30000 35000 40000
Q - Volume Flow (l/s)
Motor selection
Electrical Supply 415/3/50 Sound Performance
Motor Rating 54 kW Hz 63 125 250 500 1k 2k 4k 8k Overall
Lw 105 107 114 112 109 105 101 97 118 dB
Energy Class IE3
Lw(A) 79 91 105 108 109 106 102 96 114 dB(A)
Full load current 86.35 A
LpA @ 3m 58 70 84 88 89 86 81 75 93 dB(A)
Enclosure/Class IP55 / H
Performance certified is for installation type D, Ducted inlet, Ducted outlet. Performance ratings do not include the effects of
Frame Size 225 S/M appurtenances (accessories). The sound power level ratings shown are in decibels, referred to 10⁻¹² watts, calculated per AMCA
International 301. The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. Values
Poles number 4 shown are for inlet Lwi and inlet LwiA sound power levels for Installation type D: Ducted inlet, Ducted outlet. Ratings include
the effects of duct end correction. LpA @ 3m – dBA levels are not licensed by AMCA International.
Motor Speed 1440 rpm
Frequency 50 Hz 40 Hz 20 Hz
Lw 105 107 114 112 109 105 101 97 118 dB Lw 100 102 109 107 104 100 96 92 113 dB
LwA 79 91 105 108 109 106 102 96 114 dB(A) LwA 74 86 100 104 104 102 97 91 109 dB(A)
Lw 85 87 94 92 89 85 81 77 98 dB
LwA 59 71 85 88 89 87 82 76 94 dB(A)
LpA @ 3m 38 50 65 68 69 66 62 56 74 dB(A)
Lw 71 73 93 93 93 90 88 86 99 dB Lw 66 68 88 88 88 86 83 81 94 dB
Lw 51 53 73 73 73 71 68 66 79 dB
LwA 25 37 64 70 73 72 69 65 78 dB(A)
LpA @ 3m 4 16 44 49 52 51 49 45 57 dB(A)
Lp @ 3m 84 86 93 91 89 85 80 77 97 db
110 110
100 100
90 90
80 80
70 70
NC-70
Octave Band Sound Pressure Level dB
NC-65
60 60
Noise Criteria
NC-60
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A ØB ØC ØD E F N° Ø H
Value [mm] 1090 1250 1320 1367 730 150 20 16 1415
Psta (Pa)
Static Pressure 708 Pa 500
Fan Speed 1440 rpm 3rd Duty Point 2nd Duty Point
1st Duty Point
0
Air Properties 1.19kg/m³/ 20°C/ 240m/ 50% RH 40
30
Pabs (kW)
60
Construction Settings 40
44
Form of Running B 20
0
Casing length Long
SFP (W/l/s)
2
Total Weight 568 kg
1
Finish Type Hot-dip galvanized 0
0 5000 10000 15000 20000 25000 30000 35000
Motor selection Q - Volume Flow (l/s)
Electrical Supply 415/3/50
Certifications
Maico Gulf certifies that the DYNAIR model VA-HP are licensed to bear the
AMCA Seal. The ratings shown are based on tests and procedures
performed in accordance with AMCA Publication 211 and AMCA Publication
311 and comply with the requirements of the AMCA Certified Ratings
Program. Performance certified is for installation type D – Ducted inlet,
Ducted outlet. Performance ratings do not include the effects of
appurtenances (accessories).
Frequency 50 Hz 40 Hz 20 Hz
Lw 110 102 104 108 109 106 100 95 115 dB Lw 105 98 99 104 104 101 96 90 110 dB
LwA 84 86 96 105 109 107 101 94 112 dB(A) LwA 79 82 91 100 104 102 97 89 108 dB(A)
Lw 90 83 84 88 89 86 80 75 95 dB
LwA 64 67 76 85 89 87 81 74 92 dB(A)
LpA @ 3m 43 46 55 65 68 66 61 54 72 dB(A)
Lw 76 69 84 90 92 91 88 84 97 dB Lw 71 64 79 85 87 86 83 80 92 dB
Lw 56 49 64 70 72 71 68 65 77 dB
LwA 30 33 55 67 72 72 69 63 77 dB(A)
LpA @ 3m 9 12 35 46 51 52 48 43 56 dB(A)
Lp @ 3m 89 82 84 88 88 85 80 75 95 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A ØB ØC ØD E F N° Ø H
Value [mm] 1090 1250 1320 1367 730 150 20 16 1415
Psta (Pa)
Static Pressure 876 Pa 1000
Fan Speed 1440 rpm 3rd Duty Point 1st Duty Point
2nd Duty Point
0
Air Properties 1.19kg/m³/ 20°C/ 240m/ 50% RH 15
Pabs (kW)
60
Construction Settings 40 26
Form of Running B 20
0
Casing length Long
SFP (W/l/s)
10
Total Weight 289 kg
5
Finish Type Hot-dip galvanized 0
0 2000 4000 6000 8000 10000 12000 14000 16000
Motor selection Q - Volume Flow (l/s)
Electrical Supply 415/3/50
Certifications
Maico Gulf certifies that the DYNAIR model VA-HP are licensed to bear the
AMCA Seal. The ratings shown are based on tests and procedures
performed in accordance with AMCA Publication 211 and AMCA Publication
311 and comply with the requirements of the AMCA Certified Ratings
Program. Performance certified is for installation type D – Ducted inlet,
Ducted outlet. Performance ratings do not include the effects of
appurtenances (accessories).
Frequency 50 Hz 40 Hz 20 Hz
LwA 58 71 84 103 108 102 92 84 110 dB(A) LwA 53 66 80 98 103 97 87 79 105 dB(A)
Lw 64 67 73 86 88 81 71 65 91 dB
LwA 38 51 65 83 88 82 72 64 90 dB(A)
LpA @ 3m 17 30 44 63 68 61 51 43 70 dB(A)
Lw 50 53 72 87 91 86 78 74 94 dB Lw 45 48 67 83 86 81 73 69 89 dB
Lw 30 33 52 67 71 66 58 54 74 dB
LwA 4 17 44 64 71 67 59 53 73 dB(A)
Lp @ 3m 63 66 72 86 87 80 70 64 90 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A ØB ØC ØD E F N° Ø H
Value [mm] 840 1000 1070 1113 610 70 20 16 1170
Psta (Pa)
Static Pressure 300 Pa
200
Total Pressure 308 Pa
60
Construction Settings 40
Total Weight 96 kg 20
0
Motor selection
SFP (W/l/s)
2
Electrical Supply 415/3/50 1
ERP Information
ERP Compliance Exempt
Type -
Regulation -
Category of measure -
Selected Accessories
1 x Technopolymer terminal box-IP55
Lw 87 83 79 75 73 70 67 64 89 db
Lp @ 3m 66 62 59 55 52 49 46 43 69 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A B C D E F G H I J
Value [mm] 700 1000 700 325 325 70 70 600 600 100
Psta (Pa)
Static Pressure 442 Pa
400
Total Pressure 498 Pa
60
Construction Settings 40
Total Weight 171 kg 20
0
Motor selection
SFP (W/l/s)
2
Electrical Supply 415/3/50 1
ERP Information
ERP Compliance Exempt
Type -
Regulation -
Category of measure -
Selected Accessories
1 x Technopolymer terminal box-IP55
Lw 87 82 84 87 82 80 74 67 92 db
Lp @ 3m 67 61 63 66 61 59 54 46 72 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A B C D E F G H I J
Value [mm] 950 1250 1000 455 455 70 70 825 875 100
Psta (Pa)
Total Pressure 344 Pa
Motor Input Power 0.295 kW 3rd Duty Point 2nd Duty Point
1st Duty Point
0
Temperature Range -20 to 55⁰C 0.8
0.6
Pass (kW)
Safety Factor 10 %
0.4
Motor selection 0.2
0.0
Electrical Supply 230/1/50
10
Motor Rating 0.772 kW
SFP (W/l/s)
Enclosure/Class 55 / F 5
Poles number 4
0
Motor Speed 1449 rpm
Speed (rpm)
2000
Full Load Current 4.2 A
1000
ERP Information 0
0 100 200 300 400 500 600 700 800 900
ERP Compliance Exempt
Q - Volume Flow (l/s)
Type -
Breakout Noise
Hz 63 125 250 500 1k 2k 4k 8k Overall
Lwr 41 46 58 48 47 49 48 43 60 dB
LwrA 14 30 49 45 47 50 49 42 56 dB(A)
LprA @ 3m - 10 28 25 27 30 29 22 35 dB(A)
Certifications
Maico Gulf certifies that the DYNAIR model CAB-D are licensed to bear the
AMCA Seal. The ratings shown are based on tests and procedures
performed in accordance with AMCA Publication 211 and AMCA Publication
311 and comply with the requirements of the AMCA Certified Ratings
Program. Performance certified is for installation type B – Free inlet, Ducted
outlet. Performance ratings do not include the effects of appurtenances
(accessories).
Frequency 50 Hz 40 Hz 20 Hz
Lw 70 76 74 63 60 60 57 50 79 dB Lw 66 72 70 59 55 55 52 46 75 dB
Lw 51 57 55 44 40 40 37 31 60 dB
LwA 25 41 46 40 40 42 38 29 50 dB(A)
LpA @ 3m 4 20 26 20 20 21 18 9 29 dB(A)
Lw 41 46 58 48 47 49 48 43 60 dB Lw 36 42 53 44 43 45 44 39 55 dB
Lw 21 27 38 29 28 30 29 24 40 dB
LwA -5 11 29 26 28 31 30 23 36 dB(A)
Lw 70 76 74 63 60 60 57 50 79 db
Lp @ 3m 50 56 54 43 40 39 37 30 59 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Psta (Pa)
Total Pressure 380 Pa
Motor Input Power 0.250 kW 3rd Duty Point 2nd Duty Point
1st Duty Point
0
Temperature Range -20 to 55⁰C 0.8
0.6
Pass (kW)
Safety Factor 10 %
0.4
Motor selection 0.2
0.0
Electrical Supply 230/1/50
10
Motor Rating 0.772 kW
SFP (W/l/s)
Enclosure/Class 55 / F 5
Poles number 4
0
Motor Speed 1460 rpm
Speed (rpm)
2000
Full Load Current 4.2 A
1000
ERP Information 0
0 100 200 300 400 500 600 700 800 900
ERP Compliance Exempt
Q - Volume Flow (l/s)
Type -
Breakout Noise
Hz 63 125 250 500 1k 2k 4k 8k Overall
Lwr 42 48 59 47 45 47 46 41 60 dB
LwrA 16 32 50 43 45 48 47 40 55 dB(A)
LprA @ 3m - 11 30 23 25 28 27 20 34 dB(A)
Certifications
Maico Gulf certifies that the DYNAIR model CAB-D are licensed to bear the
AMCA Seal. The ratings shown are based on tests and procedures
performed in accordance with AMCA Publication 211 and AMCA Publication
311 and comply with the requirements of the AMCA Certified Ratings
Program. Performance certified is for installation type B – Free inlet, Ducted
outlet. Performance ratings do not include the effects of appurtenances
(accessories).
Frequency 50 Hz 40 Hz 20 Hz
Lw 72 78 76 61 58 58 55 48 81 dB Lw 67 73 71 57 53 53 50 43 76 dB
Lw 52 58 56 42 38 38 35 28 61 dB
LwA 26 42 47 38 38 39 36 27 50 dB(A)
LpA @ 3m 5 21 27 18 18 19 16 7 29 dB(A)
Lw 42 48 59 47 45 47 46 41 60 dB Lw 37 43 54 42 41 42 42 37 56 dB
Lw 22 28 39 27 25 27 26 22 41 dB
LwA -4 12 31 24 25 29 27 21 35 dB(A)
Lw 72 78 76 61 58 58 55 48 81 db
Lp @ 3m 51 57 55 41 38 37 35 28 60 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Psta (Pa)
Total Pressure 384 Pa
Motor Input Power 0.248 kW 3rd Duty Point 2nd Duty Point
1st Duty Point
0
Temperature Range -20 to 55⁰C 0.8
0.6
Pass (kW)
Safety Factor 10 %
0.4
Motor selection 0.2
0.0
Electrical Supply 230/1/50
10
Motor Rating 0.772 kW
SFP (W/l/s)
Enclosure/Class 55 / F 5
Poles number 4
0
Motor Speed 1461 rpm
Speed (rpm)
2000
Full Load Current 4.2 A
1000
ERP Information 0
0 100 200 300 400 500 600 700 800 900
ERP Compliance Exempt
Q - Volume Flow (l/s)
Type -
Breakout Noise
Hz 63 125 250 500 1k 2k 4k 8k Overall
Lwr 42 48 59 46 45 47 46 41 60 dB
LwrA 16 32 51 43 45 48 47 40 55 dB(A)
LprA @ 3m - 11 30 23 25 28 27 20 34 dB(A)
Certifications
Maico Gulf certifies that the DYNAIR model CAB-D are licensed to bear the
AMCA Seal. The ratings shown are based on tests and procedures
performed in accordance with AMCA Publication 211 and AMCA Publication
311 and comply with the requirements of the AMCA Certified Ratings
Program. Performance certified is for installation type B – Free inlet, Ducted
outlet. Performance ratings do not include the effects of appurtenances
(accessories).
Frequency 50 Hz 40 Hz 20 Hz
Lw 72 78 76 61 58 58 55 48 81 dB Lw 67 73 71 57 53 53 50 43 76 dB
Lw 52 58 56 41 38 38 35 28 61 dB
LwA 26 42 48 38 38 39 36 27 50 dB(A)
LpA @ 3m 5 21 27 18 18 19 16 7 29 dB(A)
Lw 42 48 59 46 45 47 46 41 60 dB Lw 37 43 54 42 40 42 41 36 56 dB
Lw 22 28 39 27 25 27 26 21 41 dB
LwA -4 12 31 23 25 28 27 20 35 dB(A)
Lw 72 78 76 61 58 58 55 48 81 db
Lp @ 3m 51 57 55 41 37 37 34 27 60 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Psta (Pa)
Total Pressure 253 Pa
Motor Input Power 0.143 kW 3rd Duty Point 2nd Duty Point1st Duty Point
0
Temperature Range -20 to 55⁰C 0.4
0.3
Pass (kW)
Safety Factor 10 %
0.2
Motor selection 0.1
0.0
Electrical Supply 230/1/50
8
Motor Rating 0.324 kW
SFP (W/l/s)
6
Enclosure/Class 55 / F 4
Poles number 4 2
0
Motor Speed 1388 rpm
Speed (rpm)
2000
Full Load Current 1.6 A
1000
ERP Information 0
0 100 200 300 400 500
ERP Compliance Exempt
Q - Volume Flow (l/s)
Type -
Breakout Noise
Hz 63 125 250 500 1k 2k 4k 8k Overall
Lwr 40 42 52 44 46 43 42 36 55 dB
LwrA 13 26 44 41 46 44 43 35 51 dB(A)
LprA @ 3m - 5 23 21 26 24 22 14 30 dB(A)
Certifications
Maico Gulf certifies that the DYNAIR model CAB-D are licensed to bear the
AMCA Seal. The ratings shown are based on tests and procedures
performed in accordance with AMCA Publication 211 and AMCA Publication
311 and comply with the requirements of the AMCA Certified Ratings
Program. Performance certified is for installation type B – Free inlet, Ducted
outlet. Performance ratings do not include the effects of appurtenances
(accessories).
Frequency 50 Hz 40 Hz 20 Hz
Lw 69 71 69 59 59 53 50 42 75 dB Lw 65 67 64 55 54 49 46 38 71 dB
Lw 50 52 49 39 39 34 31 23 56 dB
LwA 24 36 41 36 39 35 32 22 45 dB(A)
LpA @ 3m 3 15 20 16 19 15 11 1 25 dB(A)
Lw 40 42 52 44 46 43 42 36 55 dB Lw 35 37 48 40 42 39 38 32 51 dB
Lw 20 22 33 25 27 24 23 17 35 dB
LwA -6 6 24 22 27 25 24 16 32 dB(A)
Lw 69 71 69 59 59 53 50 42 75 db
Lp @ 3m 49 51 48 38 38 33 30 22 54 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Psta (Pa)
Static Pressure 500 Pa
500
Total Pressure 520 Pa
400
Velocity Pressure 20.7 Pa
300
Outlet Velocity 5.90 m/s
Fan Speed 1440 rpm 3rd Duty Point 2nd Duty Point
1st Duty Point
0
Air Properties 1.19kg/m³/ 20°C/ 240m/ 50% RH 6
Pabs (kW)
60
Construction Settings 40
26
Form of Running B 20
0
Casing length Long
SFP (W/l/s)
5
Total Weight 151 kg
Certifications
Maico Gulf certifies that the DYNAIR model VA are licensed to bear the
AMCA Seal. The ratings shown are based on tests and procedures
performed in accordance with AMCA Publication 211 and AMCA Publication
311 and comply with the requirements of the AMCA Certified Ratings
Program. Performance certified is for installation type D – Ducted inlet,
Ducted outlet. Performance ratings do not include the effects of
appurtenances (accessories).
Frequency 50 Hz 40 Hz 20 Hz
Lw 75 77 81 79 76 72 66 59 86 dB
LwA 49 61 73 76 76 73 67 58 81 dB(A)
LpA @ 3m 28 40 52 56 56 52 47 37 61 dB(A)
Lw 61 63 80 81 79 77 73 68 86 dB Lw 56 58 76 76 74 72 68 63 81 dB
Lw 41 43 61 61 59 57 53 48 66 dB
LwA 15 27 52 57 59 58 54 47 64 dB(A)
LpA @ 3m -5 6 31 37 39 38 34 26 43 dB(A)
Lw 95 97 101 99 96 92 86 79 106 db
Lp @ 3m 75 76 81 79 76 71 66 58 85 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A ØB ØC ØD E F N° Ø
Value [mm] 770 900 970 1013 565 70 16 16
Key ØA ØB C ØD Kg ØA ØB C ØF Kg
Value [mm] 900 970 16 16 4.2 900 970 16 16 4.2
Psta (Pa)
Static Pressure 300 Pa
60
Construction Settings 40
Total Weight 97 kg 20
0
Motor selection
SFP (W/l/s)
2
Electrical Supply 415/3/50 1
ERP Information
ERP Compliance Exempt
Type
Regulation -
Category of measure -
Selected Accessories
1 x Technopolymer terminal box-IP55
Lw 85 81 78 74 72 69 66 64 87 db
Lp @ 3m 64 60 57 54 52 48 46 44 67 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A B C D E F G H I J
Value [mm] 700 1000 700 325 325 70 70 600 600 100
Psta (Pa)
Static Pressure 250 Pa
150
Total Pressure 257 Pa
60
Construction Settings 40
Total Weight 96 kg 20
0
Motor selection
SFP (W/l/s)
1.0
Electrical Supply 415/3/50 0.5
ERP Information
ERP Compliance Exempt
Type
Regulation -
Category of measure -
Selected Accessories
1 x Technopolymer terminal box-IP55
Lw 83 80 77 73 70 67 64 61 86 db
Lp @ 3m 63 60 56 52 50 47 44 41 66 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A B C D E F G H I J
Value [mm] 700 1000 700 325 325 70 70 600 600 100
Psta (Pa)
Static Pressure 286 Pa
300
Total Pressure 315 Pa
Fan Speed 1440 rpm 3rd Duty Point 1st Duty Point
2nd Duty Point
0
Air Properties 1.19kg/m³/ 20°C/ 240m/ 50% RH 2.0
1.5
Pabs (kW)
60
Construction Settings 40 32
Form of Running B 20
0
Casing length Long
SFP (W/l/s)
4
Total Weight 72 kg
2
Finish Type Hot-dip galvanized 0
0 1000 2000 3000 4000 5000
Motor selection Q - Volume Flow (l/s)
Electrical Supply 415/3/50
Certifications
Maico Gulf certifies that the DYNAIR model VA are licensed to bear the
AMCA Seal. The ratings shown are based on tests and procedures
performed in accordance with AMCA Publication 211 and AMCA Publication
311 and comply with the requirements of the AMCA Certified Ratings
Program. Performance certified is for installation type D – Ducted inlet,
Ducted outlet. Performance ratings do not include the effects of
appurtenances (accessories).
Frequency 50 Hz 40 Hz 20 Hz
Lw 87 85 92 91 88 84 77 69 96 dB Lw 82 80 87 86 83 79 72 65 92 dB
Lw 67 65 72 71 68 64 57 50 77 dB
LwA 40 49 63 68 68 65 58 48 73 dB(A)
LpA @ 3m 20 28 43 47 48 44 38 28 52 dB(A)
Lw 54 52 72 73 73 70 66 60 79 dB Lw 49 47 68 68 68 65 61 55 74 dB
Lw 34 32 53 53 53 50 46 40 59 dB
LwA 8 16 44 50 53 51 47 39 57 dB(A)
Lw 87 85 92 91 88 84 77 69 96 db
Lp @ 3m 66 64 71 70 68 63 57 49 76 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A ØB ØC ØD E F N° Ø H
Value [mm] 725 630 690 733 420 75 12 12 787
Key ØA ØB C ØD Kg ØA ØB C ØF Kg
Value [mm] 630 690 12 12 2.9 630 690 12 12 2.9
Psta (Pa)
Static Pressure 491 Pa
500
Total Pressure 516 Pa
400
Velocity Pressure 25.2 Pa
300
Outlet Velocity 6.51 m/s
Fan Speed 1440 rpm 3rd Duty Point 2nd Duty Point
1st Duty Point
0
Air Properties 1.19kg/m³/ 20°C/ 240m/ 50% RH 6
Pabs (kW)
Construction Settings 80
Tot. Eff. (%)
60
Form of Running B 40
27
Casing length Long 20
0
Total Weight 151 kg
SFP (W/l/s)
5
Finish Type Hot-dip galvanized
Motor selection 0
0 1000 2000 3000 4000 5000 6000 7000 8000
Electrical Supply 415/3/50
Q - Volume Flow (l/s)
Motor Rating 4 kW
Certifications
Maico Gulf certifies that the DYNAIR model VA are licensed to bear the
AMCA Seal. The ratings shown are based on tests and procedures
performed in accordance with AMCA Publication 211 and AMCA Publication
311 and comply with the requirements of the AMCA Certified Ratings
Program. Performance certified is for installation type D – Ducted inlet,
Ducted outlet. Performance ratings do not include the effects of
appurtenances (accessories).
Frequency 50 Hz 40 Hz 20 Hz
Lw 75 76 80 79 76 72 66 59 85 dB
LwA 48 60 72 76 76 73 67 58 81 dB(A)
LpA @ 3m 28 39 51 56 56 53 47 37 60 dB(A)
Lw 61 62 79 81 79 77 74 68 86 dB Lw 56 57 75 76 74 72 69 63 81 dB
Lw 41 42 59 61 59 57 54 48 66 dB
LwA 15 26 51 57 59 58 55 47 64 dB(A)
LpA @ 3m -6 5 30 37 39 38 34 26 44 dB(A)
Lw 95 96 100 99 96 92 86 79 105 db
Lp @ 3m 74 75 80 79 76 71 66 58 84 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A ØB ØC ØD E F N° Ø
Value [mm] 770 900 970 1013 565 70 16 16
Key ØA ØB C ØD Kg ØA ØB C ØF Kg
Value [mm] 900 970 16 16 4.2 900 970 16 16 4.2
Psta (Pa)
Static Pressure 714 Pa 500
60
Construction Settings
47
40
Form of Running B 20
0
Casing length Long
SFP (W/l/s)
2
Total Weight 593 kg
1
Finish Type Hot-dip galvanized 0
0 5000 10000 15000 20000 25000 30000 35000 40000
Motor selection Q - Volume Flow (l/s)
Electrical Supply 415/3/50
Certifications
Maico Gulf certifies that the DYNAIR model VA are licensed to bear the
AMCA Seal. The ratings shown are based on tests and procedures
performed in accordance with AMCA Publication 211 and AMCA Publication
311 and comply with the requirements of the AMCA Certified Ratings
Program. Performance certified is for installation type D – Ducted inlet,
Ducted outlet. Performance ratings do not include the effects of
appurtenances (accessories).
Frequency 50 Hz 40 Hz 20 Hz
Lw 111 103 104 108 107 104 100 96 115 dB Lw 106 99 100 103 103 100 95 91 110 dB
LwA 85 87 96 104 107 106 101 95 111 dB(A) LwA 80 83 91 99 103 101 96 90 107 dB(A)
Lw 91 84 85 88 88 85 80 76 95 dB
LwA 65 67 76 84 88 86 81 75 92 dB(A)
LpA @ 3m 44 47 55 64 67 65 61 54 71 dB(A)
Lw 77 70 84 89 91 90 87 85 96 dB Lw 72 65 79 84 86 85 83 80 91 dB
Lw 57 50 64 69 71 70 67 65 76 dB
LwA 31 34 55 66 71 71 68 64 76 dB(A)
LpA @ 3m 10 13 35 45 50 50 48 44 55 dB(A)
Lp @ 3m 90 83 84 87 87 84 80 75 95 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A ØB ØC ØD E F N° Ø H
Value [mm] 1090 1250 1320 1367 730 150 20 16 1415
Key ØA ØB C ØD Kg ØA ØB C ØF Kg
Value [mm] 1250 1320 20 16 6.5 1250 1320 20 16 6.5
Motor selection
5.50 kW
1400
ERP Information
ERP Compliance Exempt
Type -
Regulation -
Category of measure -
Selected Accessories
1 x Technopolymer terminal box-IP55
Lw 81 75 81 82 77 73 68 65 87 db
Lp @ 3m 60 54 61 61 57 52 48 44 67 db
100 100
90 90
80 80
70 70
NC-70
NC-65
Octave Band Sound Pressure Level dB
60 60
NC-60
Noise Criteria
NC-55
50 50
NC-50
NC-45
40 40
NC-40
NC-35
30 30
NC-30
NC-25
20 20
NC-20
NC-15
10 10
0 0
63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz
Octave Band Mid-Frequency - Hz
Key A B C D E F G H I J
Value [mm] 850 1200 900 405 405 70 70 725 775 100
Psta (Pa)
Total Pressure 273 Pa
150
Velocity Pressure 4.89 Pa
60
Discharge LG-270 40
Motor Position D 20
0
Motor selection
SFP (W/l/s)
0.5
Electrical Supply 400/3/50
0.0
Motor Rating 0.37 kW
0 200 400 600 800 1000 1200 1400
Enclosure/Class 55 / F Q - Volume Flow (l/s)
Performances refers to Maico Italia measures and may vary according to the installation type.
Poles number 6
Motor Speed 910 rpm Sound Performance
Full Load Current 1.37 A Hz 63 125 250 500 1k 2k 4k 8k Overall
Lw 58 63 58 56 55 50 42 34 66 dB
ERP Information Lw(A) 32 47 49 53 55 51 43 33 59 dB(A)
ERP Compliance Exempt LpA @ 3m 11 26 29 32 34 31 22 12 38 dB(A)
Type Sounds spectra refers to Maico Italia measures performed in our laboratories according to 123. The values provided are just
indicative of the situation and Maico Italia declines every responsibility in case different levels measured by our customers as
Regulation - the installation types and the evironmental variables may increase/decrease these values.
Category of measure -
Key B C D E F G H I kg L M N O ØA
Value [mm] 630 550 40 265 730 324 870 370 46 170 150 405 170 355
Frequency 50 Hz 40 Hz 20 Hz
Motor Input Power 0.178 kW 0.091 kW 0.011 kW
Lw 58 63 58 56 55 50 42 34 66 dB Lw 53 58 53 51 50 45 37 29 61 dB
Lw 38 43 38 36 35 30 22 14 46 dB
LwA 12 27 30 33 35 31 23 13 39 dB(A)
LpA @ 3m -9 6 9 12 15 11 3 -8 19 dB(A)
B- All mentioned pressure losses for duct accessories (dampers, air outlets, air louvers, ----
etc.) shall be according to approved material submittal (manufacturer & model),
contractor’s responsibility.
2- Any deviations between duct routing in calculations and installations on site will be the
sole contractor’s responsibility, any changes on site must be studied to ensure that fan
external static pressure is safe.
3- Approved external pressure for EF-D01-MEP-02, as follows
A- Noise criteria should not exceed specified values (contractor’s responsibility), noise
calculations by specialist to be submitted for approval.
B- Sound attenuator shall be considered.
C- All mentioned pressure losses for duct accessories (dampers, air outlets, air louvers, ----
etc.) shall be according to approved material submittal (manufacturer & model),
contractor’s responsibility.
2- Any deviations between duct routing in calculations and installations on site will be the
sole contractor’s responsibility, any changes on site must be studied to ensure that fan
external static pressure is safe.
3- Approved external pressure for EPF-D01-MEP-01, as follows
A- Noise criteria should not exceed specified values (contractor’s responsibility), noise
calculations by specialist to be submitted for approval.
B- Sound attenuator shall be considered.
C- Shop drawing was not submitted for approval.
D- All mentioned pressure losses for duct accessories (dampers, air outlets, air louvers, ----
etc.) shall be according to approved material submittal (manufacturer & model),
contractor’s responsibility.
2- Any deviations between duct routing in calculations and installations on site will be the
sole contractor’s responsibility, any changes on site must be studied to ensure that fan
external static pressure is safe.
3- Approved external pressure for EPF-D01-RF-01, as follows
A- Noise criteria should not exceed specified values (contractor’s responsibility), noise
calculations by specialist to be submitted for approval.
B- Sound attenuator shall be considered.
C- Motorized fire smoke damper will be used instead of motorized smoke damper.
D- Shop drawing was not submitted for approval at roof.
E- All mentioned pressure losses for duct accessories (dampers, air outlets, air louvers, ----
etc.) shall be according to approved material submittal (manufacturer & model),
contractor’s responsibility.
2- Any deviations between duct routing in calculations and installations on site will be the
sole contractor’s responsibility, any changes on site must be studied to ensure that fan
external static pressure is safe.
3- Approved external pressure for SEF-D01-RF-01, as follows
A- Noise criteria should not exceed specified values (contractor’s responsibility), noise
calculations by specialist to be submitted for approval.
B- Sound attenuator shall be considered.
C- Motorized fire smoke damper will be used instead of motorized smoke damper.
D- Shop drawing was not submitted for approval at roof.
E- All mentioned pressure losses for duct accessories (dampers, air outlets, air louvers, ----
etc.) shall be according to approved material submittal (manufacturer & model),
contractor’s responsibility.
2- Any deviations between duct routing in calculations and installations on site will be the
sole contractor’s responsibility, any changes on site must be studied to ensure that fan
external static pressure is safe.
3- Approved external pressure for SMF-D01-RF-01, as follows
A- Noise criteria should not exceed specified values (contractor’s responsibility), noise
calculations by specialist to be submitted for approval.
B- Although as per IFC schedule, max. air flow for SR-11 is 781,while on plan flow rate is
900 l/s ,it can be accepted as shown in (SCR-CSCEC-12-D01-ME-RF-0133-00).
C- Sound attenuator shall be considered.
D- Shop drawing was not submitted for approval at roof.
E- All mentioned pressure losses for duct accessories (dampers, air outlets, air louvers, ----
etc.) shall be according to approved material submittal (manufacturer & model),
contractor’s responsibility.
2- Any deviations between duct routing in calculations and installations on site will be the
sole contractor’s responsibility, any changes on site must be studied to ensure that fan
external static pressure is safe.
3- Approved external pressure for SPF-D01-RF-01, as follows
A- Noise criteria should not exceed specified values (contractor’s responsibility), noise
calculations by specialist to be submitted for approval.
B- Shop drawing was not submitted for approval at roof.
C- All mentioned pressure losses for duct accessories (dampers, air outlets, air louvers, ----
etc.) shall be according to approved material submittal (manufacturer & model),
contractor’s responsibility.
2- Any deviations between duct routing in calculations and installations on site will be the
sole contractor’s responsibility, any changes on site must be studied to ensure that fan
external static pressure is safe.
3- Approved external pressure for SPF-D01-RF-02, as follows
Please note that for the above-mentioned project the details of the fan accessoried are mentioned below:
Please note that for the above-mentioned project the details of the motor for the project are mentioned below:
Service
Sl. No. Fan Type Motor Type Motor Brand Origin
Factor
1.2 1-speed ELK/Dynair Turkey/China
1 VA-HP
1.0 2-speed Cantoni Italy
VA-HT 1.15 1-speed DYNAIR China
2
(F300) 1.0 2-speed DYNAIR China
1.2 1-speed ELK/Dynair Turkey/China
3 Box-T
1.0 2-speed Cantoni Italy
1.2 1-speed ELK/Dynair Turkey/China
4 Box-T HT
1.0 2-speed Cantoni Italy
5 Jet Fans 1.0 2-speed DYNAIR China
CC-ATX/
6 1.0 1-speed RAEL/CEMP Italy
PR-AC ATX
Centrifugal Fans
Product Line Catalog ID
Box-D Direct Drive Double Inlet Box Fan BOXD - Version 01 February, 2013
Size Model Name Size Model Name Size Model Name
11.14 Box D 10/10 A6M - 50 Hz 11.14 Box D 10/10 A6M - 60 Hz 11.14 Box D 10/10 B4M - 50 Hz
11.14 Box D 10/10 B4M - 60 Hz 11.14 Box D 10/8 A6M - 50 Hz 11.14 Box D 10/8 A6M - 60 Hz
11.14 Box D 10/8 B4M - 50 Hz 11.14 Box D 10/8 B4M - 60 Hz 13.11 Box D 12/12 A6M - 50 Hz
13.11 Box D 12/12 A6M - 60 Hz 13.11 Box D 12/12 A6T - 50 Hz 13.11 Box D 12/12 A6T - 60 Hz
13.11 Box D 12/9 A6M - 50 Hz 13.11 Box D 12/9 A6M - 60 Hz 13.11 Box D 12/9 A6T - 50 Hz
13.11 Box D 12/9 A6T - 60 Hz 3.82 Box D 3/4 B4M - 50 Hz 3.82 Box D 3/4 B4M - 60 Hz
5.24 Box D 3/8 B4M - 50 Hz 5.24 Box D 3/8 B4M - 60 Hz 7.87 Box D 7/7 A6M - 50 Hz
7.87 Box D 7/7 A6M - 60 Hz 7.87 Box D 7/7 B4M - 50 Hz 7.87 Box D 7/7 B4M - 60 Hz
9.96 Box D 9/7 A6M - 50 Hz 9.96 Box D 9/7 A6M - 60 Hz 9.96 Box D 9/7 B4M - 50 Hz
9.96 Box D 9/7 B4M - 60 Hz 9.96 Box D 9/9 A6M - 50 Hz 9.96 Box D 9/9 A6M - 60 Hz
9.96 Box D 9/9 B4M - 50 Hz 9.96 Box D 9/9 B4M - 60 Hz
Please verify current certification status in the AMCA International Directory of Licensed Products located at
www.amca.org.
Granted This 18th day of March, 2013.
Lisa R. Ullrich
Certified Ratings Program Manager
AIR MOVEMENT AND CONTROL ASSOCIATION
INTERNATIONAL, INC.
Page 1 of 1
Appendix to the License Agreement To Use
The AMCA Certified Ratings Program Seal
Appendix No: 13
In accordance with the License Agreement issued on March 18, 2009 by Air Movement and Control Association
International, Inc., Maico Gulf LLC, is hereby authorized to use the AMCA Certified Ratings Seal on the specific air
movement and control devices listed below. Such use shall in all respects be governed by and subject to the
provisions of said License Agreement.
Centrifugal Fans
Product Line Catalog ID
TWD Twin Direct Drive Fan TWD-01-13 July, 2013
Size Model Name Size Model Name Size Model Name
11.14 TWD 10/10 A6M-50Hz 11.14 TWD 10/10 A6M-60Hz 11.14 TWD 10/10 B4M-50Hz
11.14 TWD 10/10 B4M-60Hz 11.14 TWD 10/8 A6M-50Hz 11.14 TWD 10/8 A6M-60Hz
11.14 TWD 10/8 B4M-50Hz 11.14 TWD 10/8 B4M-60Hz 13.07 TWD 12/12 A6M-50Hz
13.07 TWD 12/12 A6M-60Hz 13.07 TWD 12/12 A6T-50Hz 13.07 TWD 12/12 A6T-60Hz
13.07 TWD 12/9 A6M-50Hz 13.07 TWD 12/9 A6M-60Hz 13.07 TWD 12/9 A6T-50Hz
13.07 TWD 12/9 A6T-60Hz 5.236 TWD 3/8 B4M-50Hz 5.236 TWD 3/8 B4M-60Hz
7.8 TWD 7/7 A6M-50Hz 7.8 TWD 7/7 A6M-60Hz 7.8 TWD 7/7 B4M-50Hz
7.8 TWD 7/7 B4M-60Hz 9.96 TWD 9/7 A6M-50Hz 9.96 TWD 9/7 A6M-60Hz
9.96 TWD 9/7 B4M-50Hz 9.96 TWD 9/7 B4M-60Hz 9.96 TWD 9/9 A6M-50Hz
9.96 TWD 9/9 A6M-60Hz 9.96 TWD 9/9 B4M-50Hz 9.96 TWD 9/9 B4M-60Hz
*License to Bear the AMCA Seal for Sound and Air Performance
Please verify current certification status in the AMCA International Directory of Licensed Products located at
www.amca.org.
Granted This 2nd day of July, 2013.
Lisa R. Ullrich
Certified Ratings Program Manager
AIR MOVEMENT AND CONTROL ASSOCIATION
INTERNATIONAL, INC.
Page 1 of 1
Appendix to the License Agreement To Use
The AMCA Certified Ratings Program Seal
Appendix No: 12
In accordance with the License Agreement issued on March 18, 2009 by Air Movement and Control Association
International, Inc., Maico Gulf LLC, is hereby authorized to use the AMCA Certified Ratings Seal on the specific air
movement and control devices listed below. Such use shall in all respects be governed by and subject to the
provisions of said License Agreement.
Centrifugal Fans
Product Line Catalog ID
TWD 3/4 B4M Twin Direct Drive Fan TWD-01-13 July, 2013
Size Model Name Size Model Name Size Model Name
Please verify current certification status in the AMCA International Directory of Licensed Products located at
www.amca.org.
Granted This 2nd day of July, 2013.
Lisa R. Ullrich
Certified Ratings Program Manager
AIR MOVEMENT AND CONTROL ASSOCIATION
INTERNATIONAL, INC.
Page 1 of 1
Appendix to the License Agreement To Use
The AMCA Certified Ratings Program Seal
Appendix No: 17
In accordance with the License Agreement issued on March 18, 2009 by Air Movement and Control Association
International, Inc., Maico Gulf LLC, is hereby authorized to use the AMCA Certified Ratings Seal on the specific air
movement and control devices listed below. Such use shall in all respects be governed by and subject to the
provisions of said License Agreement.
Centrifugal Fans
Product Line Catalog ID
Box-T BOX-T-01-07 December, 2017
Size Model Name Size Model Name Size Model Name
*License to Bear the AMCA Seal for FEG Sound & Air Performance and FEG where indicated.
Only models shown in bold and indicated with * are licensed for FEG.
Please verify current certification status in the AMCA International Directory of Licensed Products located at
www.amca.org.
Granted This 12th day of December, 2017.
Nazme Mohsina
Associate Director of Certification
AIR MOVEMENT AND CONTROL ASSOCIATION
INTERNATIONAL, INC.
This license appendix may not be reproduced, except in full, without the written approval of AMCA International, Inc. Page 1 of 1
Appendix to the License Agreement To Use The AMCA
Certified Ratings Program Seal
Appendix No. : 25
In accordance with the License Agreement issued on March 18, 2009 by Air Movement and Control Association International, Inc.,
Maico Gulf LLC is hereby authorized to use the AMCA Certified Ratings Seal on the specific air movement and control devices
listed below. Such use shall in all respects be governed by and subject to the provisions of said License Agreement.
Centrifugal Fans
* License to Bear The AMCA Seal For Sound and Air Performance.
Please verify current certification status in the AMCA International Directory of Licensed Products located at www.amca.org.
Granted on December 30, 2020
Unit of Measure: mm
This license appendix may not be reproduced, except in full, without the written approval of AMCA International, Inc.
Appendix to the License Agreement To Use The AMCA
Certified Ratings Program Seal
Appendix No. : 32
In accordance with the License Agreement issued on March 18, 2009 by Air Movement and Control Association International, Inc.,
Maico Gulf LLC is hereby authorized to use the AMCA Certified Ratings Seal on the specific air movement and control devices
listed below. Such use shall in all respects be governed by and subject to the provisions of said License Agreement.
Axial Fans
* License to Bear The AMCA Seal For FEG Sound & Air Performance.
Please verify current certification status in the AMCA International Directory of Licensed Products located at www.amca.org.
Granted on December 07, 2021
Unit of Measure: mm
This license appendix may not be reproduced, except in full, without the written approval of AMCA International, Inc.
LGAI Technological Center, S.A. (APPLUS)
Campus UAB - Ronda de la Font del Carme s/n
08193 Bellaterra (Barcelona)
T +34 93 567 20 00
www.appluslaboratories.com
SAA
FIRE SAFETY CERTIFICATION
PRODUCT APPROVAL APF-1831
No.
LGAI TECHNOLOGICAL CENTER S.A. (APPLUS), according to the requirements of the SPC-102 Ed. 5, certifies the
performances stated in the technical annex following the reference standard for:
EN 12101-3:2015
Standard Reference "Smoke and heat control systems. Part 3: specification
for powered smoke and heat control ventilators (fans)."
Product Details and Please check at the technical annex file and the range
Test Report report nº 20/21630-1494-1.
This document is not valid without its technical annex, whose number coincides with the number of certificate.
Page 1 / 3
LGAI TECHNOLOGICAL CENTER, S.A. CIF: A-63207492
LGAI Technological Center, S.A. (APPLUS)
Campus UAB - Ronda de la Font del Carme s/n
08193 Bellaterra (Barcelona)
T +34 93 567 20 00
www.appluslaboratories.com
SAA
FIRE SAFETY CERTIFICATION
PRODUCT APPROVAL APF-1455
No.
LGAI TECHNOLOGICAL CENTER S.A. (APPLUS), according to the requirements of the SPC-102 Ed. 5, certifies the
performances stated in the technical annex following the reference standard for:
EN 12101-3:2015
Standard Reference "Smoke and heat control systems. Part 3: specification
for powered smoke and heat control ventilators (fans)."
Product Details and Please check at the technical annex file and the range
Test Report report nº 17/14444-1490.
This document is not valid without its technical annex, whose number coincides with the number of certificate.
Page 1 / 2
LGAI TECHNOLOGICAL CENTER, S.A. CIF: A-63207492
WIRING DIAGRAM
PRODUCT
CATALOGUES
BOX-T
Belt Driven Double Inlet Box Fans
General Description
Direct driven centrifugal cabinet fans with special acoustic lining for improved sound radiation control
from 175 to 6,000 CMH airflow range.
The low noise level is due to their plenum, lined with acoustic material that allows a remarkable reduc-
tion of noise level, inevitably generated by the fan.
Their main characteristic is the low noise level which makes them ideal for urban environments (apart-
ments, houses, bars, restaurants, gymnasiums, offices) and industrial sites where the noise is a prob-
lem.
The low noise level is due to their plenum, lined with acoustic material, that allows a remarkable reduc-
tion of noise level, inevitably generated by the fan.
The blower consists of a double inlet double width forward curved centrifugal fan with built-in motor.
Construction
• Profile less cabinet is manufactured in PPGI sheet with removable access panel to allow easy access
to fan and motor.
• The blower is fitted using suitable support feet and is completely isolated from the casing by anti- vi
bration mounts and gaskets.
• Acoustic lining in self-extinguishing techno-polymer.
• Double inlet blower forward curved with direct drive built-in asynchronous motor, single-phase or
three-phase, particularly suitable for speed regulation (using the suitable speed regulators shown in
this catalogue).
• Flanged inlet and outlet for easy duct work.
• Asynchronous three-phase motors according to international standards IEC 60034, IEC 60072, EMC
2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F. Suitable for S1 service (continuous working
at constant load).
Accessories
• Weatherproof protection cover.
• Support feet.
• Outlet terminal with guard. sez.
INSPECTION
Dx-A1 Dx-A1b Dx-A2 Dx-A3
DX
INSPECTION
Sx-A1 Sx-A1b Sx-A2 Sx-A3
SX
185
Dimensions BOX-T
All dimensions in mm. 2. Weight with Fan, Std. motor as per below motor frame size & Std. drive set these dimensions are without any accessories 3. Any Non-standard sizes
with different accessories. weight please consult with your local representative. 4. Dynair reserve the right, while leaving the essential characteristics the same ,to modify the data,
photograph and anything else shown in the above without prior warning.
sez.
7
BOX-T 15-15 to 18-18
207
Dimensions BOX-T
All dimensions in mm. 2. Weight with Fan, Std. motor as per below motor frame size & Std. drive set these dimensions are without any accessories 3. Any Non-standard sizes
with different accessories. weight please consult with your local representative. 4. Dynair reserve the right, while leaving the essential characteristics the same ,to modify the data,
photograph and anything else shown in the above without prior warning.
sez.
208
Accessories BOX-T
Type A B C D
7
12/12 577 617 584 585
15/15 677 817 645 755
18/18 817 1017 775 955
3 FILTERING SECTION
500 987 1117 965 1055
560 1110 1270 1075 1205
630 1230 1420 1205 1355
Dimensions in mm
209
BOX-T HT
High Temperature Centrifugal Fan F400 (Certified according to EN 12101-3)
DESCRIPTION
Cabinet centrifugal fan with separate motor cabin is designed for fire resistance (outside
the fire zone), car park exhaust fan or other applications where the drive system must
be outside the air stream. The construction of BOX-T HT are of pentapost design and
have strong three-way aluminum joints to form a rigid framework, pre-painted galvanized
sheet steel panel. High performance centrifugal backward/forward curved impeller manu-
factured in steel sheet. Tested in accordance to standard EN 12101-3:2015 and complies
with the performance criteria for 400C/ 2hour and certified by Applus.
CONSTRUCTION
• Box-T HT frame is with or without extruded aluminum profile and panels in PPGI sheet.
• Double inlet centrifugal fan with forward / backward curved blades, driven by trapezoidal belts and
fixed pitch pulleys.
• Belt coupling is protected by a guard in galvanized sheet steel.
• Asynchronous three-phase motors outside the air steam according to international standards IEC
60034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F. Suitable for S1
service (continuous working at constant load).
Application
• Lift lobby/lift well ventilation
• Staircase pressurization
• Car park ventilation
• Duct smoke extraction
ACCESSORIES
• Vibration Isolators
F400/120
68
Dimensions BOX-T HT
MODEL L H W C D G I F E A B
7-7 850 650 670 228 259 470 405 920 70 550 820
8-8 850 650 670 256 287 470 405 920 70 550 820
9-7 900 700 740 262 232 540 450 990 70 600 890
9-9 900 700 740 262 298 540 450 990 70 600 890
10-8 950 745 820 289 265 615 495 1070 70 650 970
10-10 950 745 820 289 331 615 495 1070 70 650 970
12-9 1050 800 910 341 309 700 550 1160 70 700 1060
12-12 1050 800 910 341 395 700 550 1160 70 700 1060
15-11 1250 935 1120 404 373 910 685 1370 70 900 1270
15-15 1250 935 1120 404 471 910 685 1370 70 900 1270
18-13 1350 1020 1245 478 430 1040 770 1495 70 1000 1395
18-18 1350 1020 1245 478 557 1040 770 1495 70 1000 1395
200 850 650 670 256 256 470 405 920 70 550 820
225 900 700 740 288 288 540 450 990 70 600 890
250 950 745 820 322 322 615 495 1070 70 650 970
280 1050 800 910 361 361 700 550 1160 70 700 1060
315 1150 870 1010 404 404 800 615 1260 70 800 1160
355 1250 935 1120 453 453 910 685 1370 70 900 1270
400 1350 1020 1245 507 507 1040 770 1495 70 1000 1395
450 1450 1120 1380 569 569 1180 870 1630 70 1050 1530
500 1550 1240 1580 638 638 1345 1000 1830 70 1150 1730
560 1650 1350 1750 715 715 1520 1070 2000 70 1250 1900
630 1850 1475 1950 801 801 1715 1195 2200 70 1300 2100
710 2050 1650 2170 898 898 1940 1400 2420 70 1350 2320
800 2250 1850 2420 1007 1007 2190 1535 2670 70 1550 2570
900 2500 1995 2690 1130 1130 2460 1715 2940 70 1800 2840
1000 2650 2155 3010 1267 1267 2775 1875 3260 70 1850 3160
Notes:
* All dimensions in mm.
* For the performance curves, contact the sales team and check in Blowdyn 2.0
69
VA-HP
High Performance Ducted Vane Axial Fans
Technical introduction
VA-HP
High Performance Ducted Vane Axial Fans
DESCRIPTION
The vane axial fans of VA-HP series are used for ducted/ non ducted installation requiring large air
flow with relatively low pressure drop, general ventilation and extraction, cooling and refrigeration in
industrial, naval, commercial, civil, energy fields, electromechanical cooling, environmental control
-crop storage, petrochemical process ventilation, This series has the advantage of being smaller in di-
mension and easier to install. The series consist of different sizes with impeller diameter from 400 to
1250 mm. VA-HP fans can be fitted with motor of different polarity depending required performances.
Suitable for conveying clean air with temperature from -10ºC to 70ºC.
CONSTRUCTION
• Long Casing & Guide vanes in sheet steel, with fixing flanges manufactured according to UNI
ISO 6580-EUROVENT standard.
• Protected against atmospheric agent by HDG (Hot Dip Galvanizing) fully adjustable high
per in Die Cast Aluminium, x-ray
formance, all impeller are statically
and dynamically balanced according ISO1940 and AMCA 204-G2.5 Standard.
• Variable pitch angle in still position with setting means, Impeller directly coupled to the motor
, all fans after assembly are trim-balanced to ISO1940 and
AMCA 204 -G2.5 standard.
MOTOR
Asynchronous three phase Motor according to international standard IEC 600034, IEC 60072, EMC
2004/108/CE LVD 2006/95/CE Marked IP 55,IE 2 (only single speed motors) CL F.
UPON REQUEST
• Performances differing from standard
• Casing protection by epoxy paint and stainless steel
• Multi-stage versions for higher pressure development
• IE3 Motors (only single speed motors)
• Backdraft Damper
DIMENSIONS VA- HP
TYPE A ØB ØC ØD E F N Ø
VA-HP 400 450 400 450 502 290 50 8 12
VA-HP 450 450 450 500 553 315 50 8 12
VA-HP 500 575 500 560 603 355 53 8 12
VA-HP 560 575 560 620 663 380 50 8 12
VA-HP 630 725 630 690 733 420 75 12 12
VA-HP 710 600 710 770 813 437 75 16 12
VA-HP 800 650 800 860 903 485 70 16 12
VA-HP 900 770 900 970 1013 565 70 16 16
VA-HP 1000 840 1000 1070 1113 610 70 16 16
VA-HP 1120 840 1120 1190 1233 675 150 20 16
VA-HP 1250 1090 1250 1320 1367 730 150 20 16
Dimensions in mm
3
VA-HT
Duct Vane Axial Fan F400
Technical introduction
VA-HT
Duct Vane Axial Fan F300 - (certified according to EN 12101-03)
DESCRIPTION
The vane axial fans of VA-HT series are used for ducted/ non ducted installation requiring large air
flow with relatively low pressure drop, general ventilation and extraction, cooling and refrigeration in
industrial, naval, commercial, civil, energy fields, electromechanical cooling, environmental control
-crop storage, petrochemical process ventilation, This series has the advantage of being smaller in di-
mension and easier to install. The series consist of different sizes with impeller diameter from 400 to
1250 mm. VA-HT fans can be fitted with motor of different polarity depending required performances.
Suitable for conveying clean air with temperature from -10ºC to 70ºC in (S1) continuous service and
400 ºC for 2 hrs in (S2) emergency service.
CONSTRUCTION
• Long Casing & Guide vanes in sheet steel, with fixing flanges manufactured according to UNI
ISO 6580-EUROVENT standard.
• Protected against atmospheric agent by HDG (Hot Dip Galvanizing) fully adjustable high
per in Die Cast Aluminium, x-ray
formance, all impeller are statically
and dynamically balanced according ISO1940 and AMCA 204-G2.5 Standard.
• Variable pitch angle in still position with setting means, Impeller directly coupled to the motor
, all fans after assembly are trim-balanced to ISO1940 and
F300/120 AMCA 204 -G2.5 standard.
UPON REQUEST
• Performances differing from standard
• Casing protection by epoxy paint and stainless steel
• Multi-stage versions for higher pressure development
• IE3 Motors (only single speed motors)
• Backdraft Damper
DIMENSIONS VA- HT
TYPE A ØB ØC ØD E F N Ø
VA-HT 400 450 400 450 502 290 50 8 12
VA-HT 450 450 450 500 553 315 50 8 12
VA-HT 500 575 500 560 603 355 53 8 12
VA-HT 560 575 560 620 663 380 50 8 12
VA-HT 630 725 630 690 733 420 75 12 12
VA-HT 710 600 710 770 813 437 75 16 12
VA-HT 800 650 800 860 903 485 70 16 12
VA-HT 900 770 900 970 1013 565 70 16 16
VA-HT 1000 840 1000 1070 1113 610 70 16 16
VA-HT 1120 840 1120 1190 1233 675 150 20 16
VA-HT 1250 1090 1250 1320 1367 730 150 20 16
Dimensions in mm
3
PR-AC ATX
Ventilatori centrifughi in materiale plastico
Centrifugal fans in plastic material
Rotazione
Rotation
RD
Forma/Form 0 45° 90° 135° 270° 315°
Rotazione
Rotation
LG N.B.: Orientamento standard LG270°
Standard discharge angles LG 270°
105
PRESTAZIONI Performance PR-AC ATX
Le prestazioni aerauliche sono rilevate in conformità alla norma EN ISO 5801/AMCA 210 Air performances measured according to EN ISO 5801 / AMCA 210 standard
con densità dell’aria standard avente peso specifico 1,2 Kg/m³. with air density with 1.2 kg/m³ specific weight.
Alimentazione 400V/3Ph/50Hz. Power supply 400V/3Ph/50Hz.
Lp: Livello di pressione sonora rilevato in condizioni di campo libero, propagazione sferica, Lp: Sound pressure level measured in free field conditions, propagation spherical,
categoria di misura D a norma EN ISO 13349, nel punto di massimo rendimento, measurement category D in accordance with EN ISO 13349, at the point of maximum
alla distanza di 1,5 metri irradiato e si presenta solo per fini comparativi. efficiency, at a distance of 1,5 meters (for comparative purposes only).
Lw: Livello di potenza sonora ottenuto secondo norma ISO 3746. Tolleranza +/- 3 dB(A). Lw: Sound power level obtained in accordance with EN ISO 3746. Tolerance +/- 3 dB(A).
Ht Ht
[kgf/m²] [Pa] Htot
70 700
PR-AC ATX 200
60 600
202
Tipo Modello Pm In
Cod. U P IP/CL Mot. 510
Type Model (kW) (A) (Gr) 50
7PA2106 PR-AC ATX 202 T 2 0,18 0,64 55/F 63 430
42
Limiti d’impiego - Operational limit 34 350
Tipo Modello Q max Pt min C max S Pd² 280
Type Model (m³/h) (mm H2O) (m/s) (m²) (kgm²) 26
PR-AC ATX 202 920 11 12,72 0,0200096 0,0132 220
20
Livelli sonori - Sound levels / dB(A) 170
15
[Hz] 63 125 250 500 1000 2000 4000 8000 TOT 125
PR-AC 202 T Lw 77,3 79,3 77,3 78,3 74,3 69,3 61,3 53,3 85 10
PR-AC 202 T Lp 63 65 63 64 60 55 47 39 70 85
125 160 210 270 350 450 580 750 1000
Q [m³/h]
0.03 0.04 0.06 0.08 0.11 0.15 0.21 0.28
Q [m³/s]
Ht Ht
[kgf/m²] [Pa] Htot
120 1200
PR-AC ATX 250 252
100 1000
Tipo Modello Pm In
Cod. U P IP/CL Mot. 820
Type Model (kW) (A) (Gr) 80
7PA2632 PR-AC ATX 252 T 2 0,37 0,97 55/F 71 660
7PA2633 PR-AC ATX 254 T 4 0,12 0,47 55/F 63
60
520
46
Limiti d’impiego - Operational limit 390
34
Tipo Modello Q max Pt min C max S Pd² 280 254
Type Model (m³/h) (mm H2O) (m/s) (m²) (kgm²) 24
PR-AC ATX 252 2050 21 18,14 0,0314 0,032 190
15
PR-AC ATX 254 980 5 8,69 0,0314 0,032 115
8.5
Livelli sonori - Sound levels / dB(A) 60
[Hz] 63 125 250 500 1000 2000 4000 8000 TOT 3.8
125 175 250 350 500 700 1050 1600 2500
PR-AC 252 T Lw 84,2 86,2 84,2 85,2 81,2 76,2 68,2 60,2 92
Q [m³/h]
PR-AC 252 T Lp 70 72 70 71 67 62 54 46 77
0.04 0.07 0.1 0.14 0.21 0.3 0.43 0.6
PR-AC 254 T Lw 69,3 71,3 72,3 67,3 66,3 61,3 53,3 45,3 77
Q [m³/s]
PR-AC 254 T Lp 55 57 58 53 52 47 39 31 62
Ht Ht
[kgf/m²] [Pa] Htot
160 1600
PR-AC ATX 280 282
130 1300
Tipo Modello Pm In
Cod. U P IP/CL Mot. 1050
Type Model (kW) (A) (Gr) 105
7PA2894 PR-AC ATX 282 T 2 0,75 1,73 55/F 80 840
80
7PA2895 PR-AC ATX 284 T 4 0,18 0,68 55/F 63
650
60
Limiti d’impiego - Operational limit 480
44
Tipo Modello Q max Pt min C max S Pd²
Type Model (m³/h) (mm H2O) (m/s) (m²) (kgm²) 340
30 284
PR-AC ATX 282 2740 22 19,00 0,04 0,069 220
19
PR-AC ATX 284 1280 5 8,887 0,04 0,069
130
10
Livelli sonori - Sound levels / dB(A)
60
[Hz] 63 125 250 500 1000 2000 4000 8000 TOT 4.2
225 325 475 675 925 1325 2000 3000
PR-AC 282 T Lw 88 90 88 89 85 80 72 64 95
Q [m³/h]
PR-AC 282 T Lp 73 75 73 74 70 65 57 49 81
0.07 0.11 0.17 0.25 0.37 0.53 0.76
PR-AC 284 T Lw 73 75 76 71 70 65 57 49 81
Q [m³/s]
PR-AC 284 T Lp 58 60 61 56 55 50 42 34 66
106
PRESTAZIONI Performance PR-AC ATX
Le prestazioni aerauliche sono rilevate in conformità alla norma EN ISO 5801/AMCA 210 Air performances measured according to EN ISO 5801 / AMCA 210 standard
con densità dell’aria standard avente peso specifico 1,2 Kg/m³. with air density with 1.2 kg/m³ specific weight.
Alimentazione 400V/3Ph/50Hz. Power supply 400V/3Ph/50Hz.
Lp: Livello di pressione sonora rilevato in condizioni di campo libero, propagazione sferica, Lp: Sound pressure level measured in free field conditions, propagation spherical,
categoria di misura D a norma EN ISO 13349, nel punto di massimo rendimento, measurement category D in accordance with EN ISO 13349, at the point of maximum
alla distanza di 1,5 metri irradiato e si presenta solo per fini comparativi. efficiency, at a distance of 1,5 meters (for comparative purposes only).
Lw: Livello di potenza sonora ottenuto secondo norma ISO 3746. Tolleranza +/- 3 dB(A). Lw: Sound power level obtained in accordance with EN ISO 3746. Tolerance +/- 3 dB(A).
Ht Ht
[kgf/m²] [Pa] Htot
200 2000
PR-AC ATX 310 312
165 1600
Tipo Modello Pm In
Cod. U P IP/CL Mot.
Type Model (kW) (A) (Gr) 130 1250
7PA3230 PR-AC ATX 312 T 2 1,50 3,34 55/F 90S
100 980
7PA3231 PR-AC ATX 314 T 4 0,25 0,89 55/F 71
7PA3232 PR-AC ATX 316 T 6 0,18 0,69 55/F 71 75 740
50 530
Limiti d’impiego - Operational limit
360 314
Tipo Modello Q max Pt min C max S Pd² 32
Type Model (m³/h) (mm H2O) (m/s) (m²) (kgm²)
220
19 316
PR-AC ATX 312 4180 35 23,72 0,0490625 0,106
115
PR-AC ATX 314 1980 8 11,20 0,0490625 0,106 9.5
PR-AC ATX 316 1256 3 7,113 0,0490625 0,106 44
3.2
100 175 275 425 650 975 1550 2650 4500
Livelli sonori - Sound levels / dB(A)
Q [m³/h]
[Hz] 63 125 250 500 1000 2000 4000 8000 TOT
0.05 0.1 0.15 0.25 0.4 0.6 0.9 1.3
PR-AC 312 T Lw 90,7 92,7 90,7 91,7 87,7 82,7 74,7 66,7 98
Q [m³/s]
PR-AC 312 T Lp 76 78 76 77 73 68 60 52 84
PR-AC 314 T Lw 75,7 77,7 78,7 73,7 72,7 67,7 59,7 51,7 83
PR-AC 314 T Lp 61 63 64 59 58 53 45 37 69
PR-AC 316 T Lw 65,2 70,2 65,2 63,2 62,2 57,2 49,2 41,2 73
PR-AC 316 T Lp 51 56 51 49 48 43 35 27 59
Ht Ht
[kgf/m²] [Pa] Htot
250 2500
PR-AC ATX 350 352
200 2000
Tipo Modello Pm In
Cod. U P IP/CL Mot. 1600
Type Model (kW) (A) (Gr) 160
7PA3629 PR-AC ATX 352 T 2 2,20 4,90 55/F 90L 1250
125
7PA3630 PR-AC ATX 354 T 4 0,37 1,22 55/F 71
95 950
7PA3631 PR-AC ATX 356 T 6 0,18 0,69 55/F 71
65 690
Limiti d’impiego - Operational limit 354
470
Tipo Modello Q max Pt min C max S Pd² 42
Type Model (m³/h) (mm H2O) (m/s) (m²) (kgm²) 290
24 356
PR-AC ATX 352 5610 41 25,14 0,062 0,182
155
PR-AC ATX 354 2690 9 12,07 0,062 0,182 12
PR-AC ATX 356 1670 4 7,491 0,062 0,182 60
4
Livelli sonori - Sound levels / dB(A)
250 400 600 900 1400 2300 3700 6000
Q [m³/h]
[Hz] 63 125 250 500 1000 2000 4000 8000 TOT
PR-AC 352 T Lw 92,2 94,2 92,2 93,2 89,2 84,2 76,2 68,2 100 0.1 0.2 0.3 0.5 0.7 1 1.45
Q [m³/s]
PR-AC 352 T Lp 78 80 78 79 75 70 62 54 85
PR-AC 354 T Lw 77,2 79,2 80,2 75,2 74,2 69,2 61,2 53,2 85
PR-AC 354 T Lp 63 65 66 61 60 55 47 39 70
PR-AC 356 T Lw 66,7 71,7 66,7 64,7 63,7 58,7 50,7 42,7 75
PR-AC 356 T Lp 52 57 52 50 49 44 36 28 60
107
PRESTAZIONI Performance PR-AC ATX
Le prestazioni aerauliche sono rilevate in conformità alla norma EN ISO 5801/AMCA 210 Air performances measured according to EN ISO 5801 / AMCA 210 standard
con densità dell’aria standard avente peso specifico 1,2 Kg/m³. with air density with 1.2 kg/m³ specific weight.
Alimentazione 400V/3Ph/50Hz. Power supply 400V/3Ph/50Hz.
Lp: Livello di pressione sonora rilevato in condizioni di campo libero, propagazione sferica, Lp: Sound pressure level measured in free field conditions, propagation spherical,
categoria di misura D a norma EN ISO 13349, nel punto di massimo rendimento, measurement category D in accordance with EN ISO 13349, at the point of maximum
alla distanza di 1,5 metri irradiato e si presenta solo per fini comparativi. efficiency, at a distance of 1,5 meters (for comparative purposes only).
Lw: Livello di potenza sonora ottenuto secondo norma ISO 3746. Tolleranza +/- 3 dB(A). Lw: Sound power level obtained in accordance with EN ISO 3746. Tolerance +/- 3 dB(A).
Ht Ht
[kgf/m²] [Pa] Htot
70 700
PR-AC ATX 400 590 404
Tipo Modello Pm In
55
Cod. U P IP/CL Mot. 490
Type Model (kW) (A) (Gr)
44
7PA4101 PR-AC ATX 404 T 4 0,55 1,75 55/F 80 400
7PA4102 PR-AC ATX 406 T 6 0,25 0,89 55/F 71 34 320
Ht Ht
[kgf/m²] [Pa] Htot
90 900
PR-AC ATX 450 760
454
75
Tipo Modello Pm In
Cod. U P IP/CL Mot. 630
Type Model (kW) (A) (Gr) 60
7PA4605 PR-AC ATX 454 T 4 1,10 2,80 55/F 90S 510
48
7PA4606 PR-AC ATX 456 T 6 0,37 1,37 55/F 80
410
38
Limiti d’impiego - Operational limit 456
320
28
Tipo Modello Q max Pt min C max S Pd² 240
Type Model (m³/h) (mm H2O) (m/s) (m²) (kgm²)
20
PR-AC ATX 454 5430 15 15,24 0,099 0,515 170
PR-AC ATX 456 3520 6 9,88 0,099 0,515 13
110
Livelli sonori - Sound levels / dB(A) 8
65
[Hz] 63 125 250 500 1000 2000 4000 8000 TOT
400 550 800 1150 1750 2650 4000 6000
PR-AC 454 T Lw 81,6 83,6 84,6 79,6 78,6 73,6 65,6 57,6 89
Q [m³/h]
PR-AC 454 T Lp 67 69 70 65 64 59 51 43 75
0.1 0.2 0.3 0.4 0.6 0.8 1.1 1.5
PR-AC 456 T Lw 72,3 77,3 72,3 70,3 69,3 64,3 56,3 48,3 80
Q [m³/s]
PR-AC 456 T Lp 58 63 58 56 55 50 42 34 66
108
PRESTAZIONI Performance PR-AC ATX
Le prestazioni aerauliche sono rilevate in conformità alla norma EN ISO 5801/AMCA 210 Air performances measured according to EN ISO 5801 / AMCA 210 standard
con densità dell’aria standard avente peso specifico 1,2 Kg/m³. with air density with 1.2 kg/m³ specific weight.
Alimentazione 400V/3Ph/50Hz. Power supply 400V/3Ph/50Hz.
Lp: Livello di pressione sonora rilevato in condizioni di campo libero, propagazione sferica, Lp: Sound pressure level measured in free field conditions, propagation spherical,
categoria di misura D a norma EN ISO 13349, nel punto di massimo rendimento, measurement category D in accordance with EN ISO 13349, at the point of maximum
alla distanza di 1,5 metri irradiato e si presenta solo per fini comparativi. efficiency, at a distance of 1,5 meters (for comparative purposes only).
Lw: Livello di potenza sonora ottenuto secondo norma ISO 3746. Tolleranza +/- 3 dB(A). Lw: Sound power level obtained in accordance with EN ISO 3746. Tolerance +/- 3 dB(A).
Ht Ht
[kgf/m²] [Pa] Htot
100 1000
PR-AC ATX 500 870
504
85
Tipo Modello Pm In
Cod. U P IP/CL Mot. 750
Type Model (kW) (A) (Gr)
70
7PA5066 PR-AC ATX 504 T 4 2,20 5,07 55/F 100L 640
7PA5067 PR-AC ATX 506 T 6 0,55 2,23 55/F 80 55 530
Limiti d’impiego - Operational limit 44 430
Tipo Modello Q max Pt min C max S Pd² 506
Type Model (m³/h) (mm H2O) (m/s) (m²) (kgm²) 34 340
109
DIMENSIONI Dimensions PR-AC ATX
C E L C E L B F G
I
D
D
A
A
H
D
P P N
Q Q R
TIPO / TYPE A B C D E F G H I L N P Q R kg
20 140 180 35 160 160 138 55 250 150 195 200 100 140 235 17
25 173 228 35 200 185 170 55 310 190 220 255 100 140 290 24
28 208 255 40 225 195 190 70 350 210 240 280 120 190 316 33
31 240 280 40 250 200 210 70 410 230 290 320 150 230 355 45
35 260 312 40 280 237 230 55 445 270 290 355 150 230 390 51
40 290 356 40 315 252 264 55 495 295 240 325 170 250 365 47
45 324 400 40 355 287 395 55 550 330 290 370 170 250 410 61
50 360 460 50 400 355 355 80 630 395 300 289 197 636 325 77
56 410 490 50 450 365 380 80 710 410 340 289 237 696 325 120
63 445 610 50 500 415 420 80 800 505 420 337 237 741 373 131
Dimensioni in mm / Dimensions in mm
Pesi indicativi / Indicative weights
110
ACCESSORI Accessories PR-AC ATX
NB: accessori non contemplati nel Certificato di Esame del Tipo. Contattare il servizio tecnico-commerciale per esigenze costruttive diverse.
NB: accessories not included in the Type Examination Certificate. Please contact us for any different construction requirments.
GIUNTO ANTIVIBRANTE IN PVC PER BOCCA ASPIRANTE E PREMENTE - INLET AND OUTLET ANTIVIBRATION JOINT IN PVC
MODELLO
B Cod. ØA B
TYPE
5SU3020 20 160 160
5SU3025 25 200 160
5SU3028 28 225 160
5SU3030 31 250 160
5SU3036 35 280 160
5SU3040 40 315 160
ØA
ØA
5SU3045 45 355 160
5SU3054 50 400 160
5SU3056 56 450 160
5SU3063 63 500 160
Dimensioni in mm / Dimensions in mm
ØA
ØC
ØA
RETE DI PROTEZIONE IN ACCIAIO INOX - INLET PROTECTION GUARD ACCORDING TO UNI 10615
MODELLO
Cod. ØA
TYPE
5RE2002 20 160
5RE2552 25 200
5RE2802 28 225
5RE2029 31 250
5RE2502 35 280
A
5RE4004 40 315
5RE4504 45 355
5RE5008 50 400
5RE5600 56 450
°
90
5RE6300 63 500
Dimensioni in mm / Dimensions in mm
111
MGU-CAB-D, MAR -2020
CAB-D
Direct driven double inlet box fans
Technical introduction
CAB-D
Direct driven double inlet box fans
General Description
The fan of the CAB-D series are particularly designed for air extraction, supply or
filtration. Their main characteristic is the low noise level which makes them ideal for urban
environments (apartments, houses, bard restaurants, gymnasiums, offices) and industrial
sites where radiated noise is a problem. The low noise level is due to their plenum lined with
acoustic material, that allows a remarkable reduction of noise level, inevitably generated
by the fan. The blower consists of a double inlet forward curve centrifugal fan with built-in
IP55 , Class - F motor.
Construction
• Profile less cabinet is manufactured in PPGL sheet with removable access panel to allow
easy access to fan and motor.
• The blower is fitted using suitable support feet and is completely isolated from the
casing by anti-vibration mounts and gaskets.
• Acoustic lining in self-extinguishing techno-polymer
• DIDW, forward curved, with direct drive built-in external rotor motor , IP55 , Class - F
particularly suitable for speed regulation (using the suitable speed regulators shown in this
catalogue).
• Motors are thermally protected ( Internal )for model CAB-D 12/9 6P M and CAB-D 12/12
6P M and thermally protected ( External ) for rest of the models.
• Flanged Inlet and outlet for easy ease of duct work
3
Dimensions CAB-D
Tested in accordance with AMCA standard 210 and 300 at air temperature 15°C - Barometric pressure 760 mm Hg - Air specific weight 1.22 Kg/m³
Discharge angles
4
Performance CAB-D
Tested in accordance with AMCA standard 210 and 300 at air temperature 15°C - Barometric pressure 760 mm Hg - Air specific weight 1.22 Kg/m³
CAB-D 7/7 4P M
350
300
CAB-D 7/7 4P M
250
Air Flow Pressure IP/CL Operating Temp
150
W A RPM uF
100
324 1.6 1400 5 230V/1Ph/50Hz
50
0
0 500 1000 1500 2000
Q - Volume Flow (m³/h)
CAB-D 7/7 6P M
160
140
120
CAB-D 7/7 6P M
100 Air Flow Pressure IP/CL Operating Temp
80
60
40 W A RPM uF
129 0.65 900 2.5 230V/1Ph/50Hz
20
0
0 200 400 600 800 1000 1200 1400
Q - Volume Flow (m³/h)
5
Performance CAB-D
Tested in accordance with AMCA standard 210 and 300 at air temperature 15°C - Barometric pressure 760 mm Hg - Air specific weight 1.22 Kg/m³
CAB-D 9/7 4P M
500
400
CAB-D 9/7 4P M
Air Flow Pressure IP/CL Operating Temp
200
Rated Power Max. Current Nominal Speed Capacitor Power Supply
W A RPM uF
772 4.2 1400 12.5 230V/1Ph/50Hz
100
0
0 500 1000 1500 2000 2500 3000 3500
Q - Volume Flow (m³/h)
CAB-D 9/9 4P M
600
500
CAB-D 9/9 4P M
400
Air Flow Pressure IP/CL Operating Temp
300
200
Rated Power Max. Current Nominal Speed Capacitor Power Supply
W A RPM uF
763 4.6 1400 12.5 230V/1Ph/50Hz
100
0
0 500 1000 1500 2000 2500 3000 3500
Q - Volume Flow (m³/h)
6
Performance CAB-D
Tested in accordance with AMCA standard 210 and 300 at air temperature 15°C - Barometric pressure 760 mm Hg - Air specific weight 1.22 Kg/m³
cAB-D 10/8 4P M
700
600
CAB-D 10/8 4P M
500
Air Flow Pressure IP/CL Operating Temp
400
3400 650 55/F -20/55
Psta (Pa)
300
W A RPM uF
200
1130 5.2 1400 16 230V/1Ph/50Hz
100
0
0 500 1000 1500 2000 2500 3000 3500 4000
Q - Volume Flow (m³/h)
CAB-D 10/8 6P M
350
300
250
CAB-D 10/8 6P M
Air Flow Pressure IP/CL Operating Temp
150
50
0
0 500 1000 1500 2000 2500 3000
Q - Volume Flow (m³/h)
7
Performance CAB-D
Tested in accordance with AMCA standard 210 and 300 at air temperature 15°C - Barometric pressure 760 mm Hg - Air specific weight 1.22 Kg/m³
CAB-D 10-10 4P M
700
600
CAB-D 10/10 4P M
500
Air Flow Pressure IP/CL Operating Temp
300
W A RPM uF
200
1520 6.9 1400 25 230V/1Ph/50Hz
100
0
0 1000 2000 3000 4000 5000 6000
CAB-D 10/10 6P M
350
300
250
CAB-D 10/10 6P M
Air Flow Pressure IP/CL Operating Temp
150
50
0
0 500 1000 1500 2000 2500 3000 3500 4000
Q - Volume Flow (m³/h)
8
Performance CAB-D
Tested in accordance with AMCA standard 210 and 300 at air temperature 15°C - Barometric pressure 760 mm Hg - Air specific weight 1.22 Kg/m³
1100
CAB-D 12/9 4P T
1000
900
CAB-D 12/9 4P T
800
Air Flow Pressure IP/CL Operating Temp
500
W A RPM
300 4340 9.7 1400 400V/3Ph/50Hz
200
100
0
0 1000 2000 3000 4000 5000 6000 7000 8000 9000
Q - Volume Flow (m³/h)
CAB-D 12/9 6P M
500
400
CAB-D 12/9 6P M
Air Flow Pressure IP/CL Operating Temp
300
m3/h Pa Min/Max (°C)
5400 456 55/F -20/55
Psta (Pa)
200
W A RPM uF
100 1400 6.39 900 25 230V/1Ph/50Hz
0
0 1000 2000 3000 4000 5000 6000
Q - Volume Flow (m³/h)
9
Performance CAB-D
Tested in accordance with AMCA standard 210 and 300 at air temperature 15°C - Barometric pressure 760 mm Hg - Air specific weight 1.22 Kg/m³
CAB-D 12/12 6P M
600
500
CAB-D 12/12 6P M
Air Flow Pressure IP/CL Operating Temp
400
m3/h Pa Min/Max (°C)
5650 500 55/F -20/55
Psta (Pa)
300
100
0
0 1000 2000 3000 4000 5000 6000 7000
Q - Volume Flow (m³/h)
CAB-D 12/12 6P T
600
500
CAB-D 12/12 6P T
400
Air Flow Pressure IP/CL Operating Temp
300
200
Rated Power Max. Current Nominal Speed Power Supply
W A RPM
1790 4.6 900 400V/3Ph/50Hz
100
0
0 1000 2000 3000 4000 5000 6000 7000 8000
Q - Volume Flow (m³/h)
10
Maico Factories
Features and technical data can vary without prior notice without modifying the main functional parameters of the products. All trademarks mentioned are
the property of Maico. All rights reserved.
OPERATION &
MAINTENANCE MANUAL
Axial Fan
Operation
&
Maintenance
Manual
(CC,CC-HP,CC-HT,TA-HP,TA-HT)
3
Axial Fan
1. INTRODUCTION
The Axial fans are used to handle flow of clean or slightly dusty air (unless otherwise stated), adhering to the
operating conditions shown in the technical catalogues and in the technical data sheet, it can also be used ,more
complex system, machines or plants. All fans can also manufactured in special versions, which must be previ-
ously agreed with the manufacturer. The dynair short/long cased Axial fans range is produced in a range of sizes
400mm to 1600mm diameter.
Casings are manufactured from various material such as per galvanized steel or hot deep galvanized steel. Impel-
lers are selected to meet the specific performance and are available in a variety of materials to ensure suitability
for the application.
2. general INFORMATON
Special attention should be paid to the section following word ‘WARNING’ as if not complied with, can cause
injuries to people and / or damage to the fan.
NOTE : Store this manual for future reference, we reserve the right to improve and make changes to the manual,
product and accessories without any obligation to update previous production and manuals.
NOTE : Qualified person regarded staffs that have a specific technical knowledge in aerodynamic and electric
system components should handle the fan maintenance
WARNING: The manufacturer cannot know the type of installation and therefore supplies the Guard (for inlet and
outlet) on customer request, who is responsible to assessing the system safe conditions. Should other type of
guard be required, the final installer or whoever acts on his behalf, must carry out a risk assessment specifically
related to the type of installation required and therefore insert the suitable safety systems according to the type
of application. In order to ensure full compliance with Machine Directive 2006142/EC these systems must be well
built, in order to avoid any risk of injury and must be fixed securely by requiring special tool to remove them.
4 4
Axial Fan
The provision of safety net changes the aeraulic efficiency of the fans: all losses of load, including those generated
by safety nets or by other accessories, must be assessed at the design stage according to the speed, the air den-
sity, the temperature and all other issues which contribute to change their impact in the system.
Both final user and installer must take in account other type of risk, more specifically those caused by foreign
bodies entering the fan, or by mixtures different from those allowed. It is also necessary to take into account other
risks during the routine and unscheduled maintenance operations, which must be carried out safely by discon-
necting or isolating the motor power supply with suitable safety devices and with other precautions specified in
more details in the following sections, which list the safety warnings and maintenance sections.
WARNING: Fitting safety nets does not fully avoid foreign bodies from entering the fan. If hazardous bodies or
particles should get mixed up with the treated air, the user must carry out a full risk assessment able to identify
their possible dimensions. If the diameter of the standard safety net is not enough to ensure the minimum safety
requirements the user must take all the precautionary measures required to avoid any residual risk.
WARNING: Periodically check the efficiency of the guard should they become faulty or too worn which could
negatively affect their operation, they must be replaced. After the installation, all the main technical features of the
fan must be checked (that the guards have not been removed and/or damaged and/or changed) and if necessary
a global risk assessment for the fan in relation to its application.
5
Axial Fan
• Carry out a routine maintenance plan to avoid structural subsidence and mechanical faults over time
• When cleaning the impeller, even with the power supply disconnected, the impeller could still move by inertia
or by natural or forced air currents coming from the other equipment connected to the same system, therefore a
serious risk of shearing and/or pinching. For this reason, the impeller must be mechanically locked. It is strictly
forbidden:
- To work on the fan whilst in operation.
- To remove the guards when the fan is operating.
- To work on the fan without disconnecting the power supply.
NOISE: The fan noise levels are stated in dB (A) and are shown in the technical data sheet (enclosed).
WARNING: The user may detect different values from those shown according to the fan operating environment.
It is always recommended to isolate the fan from the ground and from the ducting with anti-vibration mountings
couplings and when necessary provide effective sound proofing system in order to protect the staff health.
The user and the employer must comply with current legislation in terms of assuring daily protection from exces-
sive noise to all operators (as required by current European and National standards) and if needed to require as
mandatory the use of personal Protective equipment (ear defender etc.) according to the overall sound pressure
level identified in a single working area and to the daily levels operators are exposed to.
The material inlet and outlet openings are protected by the installer or by a grille which avoids people from coming
into contact with moving parts or by another device. In any case, for all maintenance operations and after making
the machine safe it is compulsory for the operator to use the personal protective equipment. It is forbidden to
stop the fan before the fluid inside has reached the fan temperature lower than 60°C to avoid excessive heat from
damaging the motor or the monopoly. Should it be impossible to reach this temperature, external cooling systems
must be provided. When the fan is not working if its internal temperature increases the user must use all means
available to reduce the temperature to values lower than 60°C before starting up the fan. Before starting up the
fan, make sure all guards are correctly installed, The inspection door must be removed only with special tools and
only when the fan has been stopped. The maintenance operations must be carried out in totally safe conditions by
disconnecting the fan from the motive power. The manufacturer shall not be responsible for damages to things or
injuries to people caused by missing safety devices if at the time of ordering, the customer does not specifically
require them.
6
Axial Fan
WARNING: When handling objects over long distances and over uneven ground, the impeller must be locked
in position to avoid vibrations from damaging the bearing races. When handling the fans in particularly adverse
environments, such as when travelling on a ship or on uneven grounds, or when lifting the fans with a crane to
reach elevated installation sites, all warranties supplied will become void for drive parts and more specifically, for
bearing and mountings, if they are not suitably protected. If in doubt ask the manufacturer. The transport position
specified by the manufacturer for the fans or its single components must be complied with.
4.2 ACCEPTANCE
All fans are tested balanced and inspected before shipping. The fan is identified from the data printed on the
identification label affixed to the fan itself. The fan is supplied with legally required warranty. The warranty start
from delivery date and cover all faults caused by poor workmanship or construction faults when the goods are
received, damages are noticed, they must be immediately reported to the haulier and to the manufacturer: the
manufacturer shall not be held responsible for damages caused during transport. Damaged fans should not be
used or repaired, as this would make all warranties void. Check that the fan matches with the order (design,
rotation, power and polarity of the motor installed, accessories, etc.); no non conforming returns will be accepted
after installation has taken place.
WARNING: The range of fans is completed with all safety devices in compliance with current standards, available
on request (see technical data sheet), The manufacturer shall not be responsible for damages to things and inju-
ries to people caused by missing safety devices, nor shall it be responsible for any damages caused by misuse
and/or failure to adhere to the instructions described in this manual.
4.3 STORAGE
4.3.1 Short Term Storage
As soon as the fan is received at the site the complete fan unit and/ or different parts of the fans should be placed
in a well ventilated and dry preferably under shed.
Avoid the fan from being subject to knocks, which could damage it.
Before putting the fan in to service the bearing assembly should be cleaned thoroughly With MTO fresh grease
and it should be put into bearing housing in the correct amount.
Do not store fans near machines which generate Vibrations, to avoid the bearings from being subject to the
same type of stresses. Special care must be taken when handling large impellers or shafts, if they are received
disassembled for transport reasons, to avoid balancing problems. The manufacturer shall not be responsible for
damages to drive parts caused by prolonged fan inactivity.
7
Axial Fan
Axial fan features an axial air flow in a cross flow configuration. Their performance is suitable for medium and
high air flow and for medium or high pressures. The performance of each fan is shown in the technical cata-
logues. The range of axial fans includes standard versions, suitable to handle clean or slightly dusty air with a tem-
perature between -20°C and +50°C or special versions. Such features are described in the technical catalogues
and in the enclosed technical data sheet, which must be consulted to identify the suitability of the fan to handle
the fluid treated by the plant where the fan will be installed. Based on their construction they can essentially be
divided in two types:
(A) Ducted axial fan: consisting of an impeller and a motor mounted in a cylindrical casing, the fan is driven
directly from the motor (direct coupling) or by means of pulleys and belts (indirect coupling)
(B) Wall-mounted axial fan: with directly coupled impeller and motor mounted on a panel or ring.
For further information, please refer the technical catalogues.
• CC-AL Ducted Axial Fan W/ Aluminum Impeller (Hot Dipped Galvanized) with Feet Support(HDG) and Ext
Terminal Box - Dynair
• ta/CC-HP High Performance Ducted Axial Fan ( Hot Dipped Galvanized) with Feet Support(HDG) and Ext
Terminal Box - Dynair
• ta/CC-HT Ducted Axial Fan rated at 300°C/2hrs. (Hot Dipped Galvanized) with Feet Support(HDG) and Ext
Terminal Box - Dynair
8
Axial Fan
In both axial and centrifugal fans, inlet & outlet ducts should be independently supported and never supported
by the fan flanges. Flexible duct connections are recommended. These connection will also minimized the noise
and reduce the vibration
The independent mounting of stack and duct to the fan flanges will assure that the fan will not be subjected to any
external forces which may twist or deform fan housing. This also will ensure that the impeller will not strike the
housing or cause misalignment of the sheaves and bearing.
Its recommended that the access door to be placed in duct work just ahead of the fan inlet and just behind for easy
of inspection and maintenance. Access door in duct system should never be open with the fan running, to avoid
possible equipment and damage personal injury.
No turns in duct should be closer to than two and one half fan diameter away from the inlet and outlet of the
fan. Walls and flat surface also should not be closer than one fan diameter from the inlet side.
Branch entries into the main duct should be spaced such that they do not enter directly opposite each other. A
maximum of 45 degree angle between main branch and entering branch should be used as a guideline. Avoid
sudden changes in duct size, Use a 14 degree included angle, or less, in reducing a duct to a fan, and not more
than 30 degrees included angle to the discharge. Elbow turns should be kept to a centerline radius of at least one
and one-half diameters of the duct.
INSTALLATION GUIDELINES
Fig.2
9
Axial Fan
Fig.2
Installation Method
Fig.3
10
Axial Fan
Point-A
Point-D
Point-C
Fig.4
Fig.5
Fig.6
11
Axial Fan
Electrical connections for the fan motor must be connected by a qualified electrician, confining to the National
Electrical code and local codes and practices. When making electrical connections, the motor must be connected
following electrical characteristics as indicated by the motor nameplate, and adhere to the wiring diagram on the
motor nameplate or in the motor terminal box.
Motors may fail immediately if improperly connected. It is also recommended that an overload device to protect
the motor to be install between the current supply and the motor. Recommended tolerances for overload devices
should be plus 10 % of the motor Full load amperage rating, including the allowance for the motor service factor.
NOTE: It is common for motors to draw several times full load amperage during startup, for approximate fifteen
seconds. Larger sized fans may require twenty seconds or longer.
Note : We advise to check the motor data to ensure the connection details.
Fig.7 Fig.8
To starter
To starter Control circuit
Control circuit
TI T2
T1 T2
U1 V1 W1
To starter
Control circuit L1 L2 L3
To starter
Control circuit L1 L2 L3
Fig.9 Fig.10
(Three Phase Up to & including 3 Kw) (Three Phase - 4kw and Above)
12
Axial Fan
MOTOR TERMINALS
Fig.11
Fig.13
13
Axial Fan
A complete inspection should be made of all duct work and the fan interior. Make sure there is no foreign mate-
rial, which can be drawn into or blown through the fan or ductwork. Appropriate protective measures and safety
practices should be observed when entering or working within these areas. There measures may include the use
of goggles, respirators, or other personal protective devises.
Before putting any fan into initial operation the manufacturer’s instruction must be followed. Complete the follow-
ing checklist to make sure that the fan is ready to run.
♦ Make sure the foundation or mounting arrangement and the duct connections are adequately designed in
accordance with recognized acceptable engineering practices and with the fan manufacturer’s recommenda-
tions.
♦ Ensure power and drive component such as motor starter, variable frequency drive are properly matched and
connected to the fan.
♦ Check the fan assembly and bearings for proper grounding to prevent static electricity discharge.
♦ Spin impeller to see whether it rotates freely and is not grossly out of balance. Inspect impeller for correct
rotation for the fan design.
Switch on the electrical supply and allow the fan to reach full speed.
Then check carefully for :-
• Excessive vibration
• Unusual noise
• Proper amperage and voltage values
If any problem is indicated, SWITCH OFF IMMEDIATELY. Lock out the electrical supply, secure the fan impeller if
there is a potential for wind milling (impeller turning due to a draft through the system).
Check carefully for the cause of the trouble and correct as necessary.
The fan may now be put into operation but during the first 8 hrs of running, it should be periodically observed and
checked for excessive vibration and noise. Checks should be made on motor input current, motor and bearing
temperature to ensure that they do not exceed manufacturer’s recommendation limits. After 8 hrs of operation,
the fan should be shut down to check the following items:-
14
Axial Fan
WARNING: Do not touch the terminals during and immediately after the measurement as the terminals are live.
Note the impeller direction of rotation shown by the arrow (if provided) located on the impeller blades or on the
fan itself. The installer must interface the machine with the required start-up/stop controls, emergency stop, reset
after an emergency stop button complying with current standards (EN 60204-1, EN 1037, EN 1088, and EN 953).
WARNING: The fan frame must be earthed; furthermore, it must be verified that all its components have a same
potential. The installer must connect the fan to the earthen circuit and check the potential is effectively the same
on all its components before starting the machine.
(1) Check that the direction of rotation matches with the direction shown by the arrow.
(2) Check the input current does not exceed the current shown on the product identification label and motor
nameplate.
(3) To have reliable information, allow a reasonable period of stabilizing time. In the delta/triangle connection,
the reading must be carried out upstream of the change-over switch; if this is not possible, detect the live
current on any of the six wires at the terminal box and multiply this value by 1,73.
(4) Avoid consecutive start-ups of the motor as this would cause continuous overloads, and overheat the elec
trical parts.
(5) Before start-up, allow enough time to cool down.
(6) Check the bearing temperature after the first hour of operation, as these are the most critical. If necessary,
stop the fan and restart it only after reaching the ambient temperature.
(7) Then check that the temperature is lower than the previously measured temperature. By means of a vibrome
ter check that the vibrations are not excessive by referring to the following paragraph. After few hours of
operation, check that the vibrations have not slackened the tightness of nuts.
9. ROUTINE MAINTENANCE
Periodic inspection of all the fan parts is the key to good maintenance and trouble free fan operation. Frequency
of inspection must be determine by the user and its dependent upon the severity of the application. Prepare
maintenance schedule and make sure it is strictly adhere too.
NEVER SERVICE OR ADJUST ROTATING EQUIPMENT WHILE IT IS IN OPERATION. LOCK OUT THE POWER
SOURCE BEFORE PERFORMING MAINTENANCE.
Maintenance should always be performed by experienced and trained personnel. Do not attempt any maintenance
on a fan unless the electrical supply has been locked out or tagged out and the impeller has been secured.
15
Axial Fan
♦ Under normal circumstances, handling clean air, the system should require cleaning only about a year. How
ever, the fan and system should be checked at regular intervals to detect any unusual accumulation.
♦ The fan impeller should be specially checked for build-up of material or dirt which may cause an imbalance
with resulting undue wear on bearings and belt drives. A regular maintenance program should be established
as needed to prevent material build-up.
♦ Periodic inspection of the rotating assembly must be made to detect any indication of weakening of the rotor
because of corrosion, erosion, or metal fatigue.
16
Axial Fan
17
Axial Fan
Fig.14
Three-phase motors have fewer components that may malfunction than other motor types. Therefore, 3Ø motors
usually operate for many years without any problems. If a 3Ø motor is the problem, the motor is serviced or
replaced. Servicing usually requires that the motor be sent to a motor repair shop for rewinding. If the motor is
less than 1 HP and more than 5 years old, it should be replaced. If the motor is more than 1 HP, but less than 5
HP, it may be serviced or replaced. If the motor is more than 5 HP, it is usually serviced.
18
Axial Fan
See Figure 14. To troubleshoot a three-phase motor apply the following procedure:
1. Using a voltmeter measure the voltage at the motor terminals. If the voltage is present and at the correct level
on all three phases, the motor must be checked. If the volt-age is not present on all three phases, the incoming
power supply must be checked.
2. If voltage is present but the motor is not operating, turn the handle of the safety switch or combination starter
OFF. Lock out and tag the starting mechanism per company policy.
4. Alter the load is disconnected, turn power ON to try restarting the motor. If the motor starts, check the load.
5. If the motor does not start, turn it OFF and lock out the power.
6. With an ohmmeter, check the motor windings for any opens or shorts. Take a resistance reading of the Tl-T4
coil. This coil must have a resistance reading. If the reading is zero, the coil is shorted. If the reading is infinity, the
coil is opened. Since the coil winding is made of wire only, the resistance is low. However, there is resistance on
a good coil winding. The larger the motor, the smaller the resistance reading.
After the resistance of one coil has been found, the basic electrical laws of series and parallel circuits are applied.
When measuring the resistance of two coils in series, the total resistance is twice the resistance of one coil. When
measuring the resistance of two coils in parallel, the total resistance is one half the resistance of one coil.
Note: While ordering for fan spares please mention Dynair Reference number and fan type from the name plate
of existing fan.
19
Operation
&
Maintenance
Manual
CODE-00000000 BOX-FAN-OMM-NOV19
2
BOX-FAN
index
General........................................................................... 4
Installation ....................................................................8
Startup ......................................................................... 10
Shut Down..................................................................... 13
Troubleshooting ........................................................... 14
3
BOX-FAN
General
General Safety Guidelines
This equipment is a relatively complicated apparatus. During installation, operation maintenance or service,
individuals may be exposed to certain components or conditions including, but not limited to: refrigerants,
materials under pressure, rotating components, and both high and low voltage. Each of these items has the
potential, if misused or handled improperly, to cause bodily injury or death. It is the obligation and respon-
sibility of operating/service personnel to identify and recognize these inherent hazards, protect themselves,
and proceed safely in completing their tasks. Failure to comply with any of these requirements could result
in serious damage to the equipment and the property in which it is situated, as well as severe personal
injury or death to themselves and people at the site. This document is intended for use by owner-authorized
operating/service personnel. It is expected that these individuals possess independent training that will
enable them to perform their assigned tasks properly and safely. It is essential that, prior to performing any
task on this equipment, this individual shall have read and understood this document and any referenced
materials. This individual shall also be familiar with and comply with all applicable governmental standards
and regulations pertaining to the task in question.
WARNING - External wiring, unless specified as an optional connection in the manufacturer’s product
line, is not to be connected inside the control cabinet. Devices such as relays, switches, transducers
and controls and any external wiring must not be installed inside the fan. All wiring must be in
accordance with dynair published specifications and must be performed only by a qualified
electrician. Dynair will NOT be responsible for damage / problems resulting from improper
connections to the controls or application of improper control signals. Failure to follow this warning
will void the manufacturer’s warranty and cause serious damage to property or personal injury.
Safety Consideration
The equipment covered by this manual is designed for safe and reliable operation when installed
and operated within its design specification limits. To avoid personal injury or damage to equipment
or property while installing or operating this equipment, it is essential that qualified, experienced
personnel perform these functions using good judgment and safe practices. See the following cau-
tionary statements.
WARNING - Check that the unit assembly and component weights can be safely supported by rigging
and lifting equipment.
WARNING - All assemblies must be adequately secured during lifting and rigging by temporary
supports and restraints until equipment is permanently fastened and set in its final location.
WARNING - All unit temporary and permanent supports must be capable of safely supporting the
equipment’s weight and any additional live or dead loads that may be encountered. All supports must
be designed to meet applicable local codes and ordinances.
WARNING - All fastening devices must be designed to mechanically lock the assembly in place
without the capability of loosening or breaking away due to system operation and, vibration, impact
or seismic events.
DANGER - ELECTRICAL SHOCK HAZARDS. All power must be disconnected prior to installation and
serving this equipment. More than one source of power may be present. Disconnect all power
sources to avoid electrocution or shock injuries.
4
BOX-FAN
DANGER - MOVING PARTS HAZARDS. Motor and Blower must be disconnected prior to opening
access panels. Motors can start automatically, disconnect all power and control circuits prior to
servicing to avoid serious crushing or dismemberment injuries.
DANGER - HOT PARTS HAZARDS. Electric Resistance heating elements must be disconnected prior to
servicing. Electric Heaters may start automatically, disconnect all power and control circuits prior to
servicing to avoid burns.
CAUTION - Secure all dampers when servicing damper, actuator or linkages. Dampers may activate
automatically, disconnect control circuits or pneumatic control systems to avoid injury.
CAUTION - Protect adjacent flammable materials when brazing, Use flame and heat protection barriers
where needed. Have fire extinguisher available and ready for immediate use
RISK ASSESSMENT
Mechanical failure such as Dam- Reguler checks for wear and tear &
4 Service age impeller, imbalance sheaves Likely High A tightening Unlikely High Y
and motor assembly etc
5
Shipping, handling, storage
Shipping
Units are normally shipped Ex-Works. They are inspected prior to dispatch for goods condition and
carefully loaded in containers with no crating/boxing. Hence, in case of transit damage, the forwarder must
be informed immediately.
All claims must be directed to the forwarding / insurance agents and MAICO (DYNAIR) takes no
responsibility. When units are shipped FOB port, they are either containerized or crated and delivered FOB
to for- warders. Immediately upon receipt on site, inspection should be made and any damages must be
reported by telex or email to MAICO (DYNAIR) as well as to the forwarding/insuring agents within 24 hrs
of receipt.
Caution
Serious bodily damage or material damage may be caused by falling loads. Observe the safety
instructions of the transporting vehicles. Do not stop under an airborne load!
Handling
The dynair Box fans are fully assembled, or in separately assembled sections depending on the unit size
and application.
The equipment must be rigged as it was shipped from the factory. Do not remove shipping skid or
protective cover until equipment is ready for final placement, as damage to equipment can result.
Units without base rails must be lifted with slings. Place slings at ends and joints of fan to prevent damage
to equipment. Spreader bars must be used to prevent damage to equipment. Avoid twisting or uneven
lifting of equipment.
If transporting units with forklift, forks must extend the full width of unit to prevent damage to bottom of
unit. Always take special care when handling the blower module. All fans are dynamically balanced. Rough
handling may cause bearing misalignment and/or shaft damage.
Storage
To transfer equipment from truck to storage site, refer to Handling (above).
Do not stack unit modules or accessories during storage. Stacking can cause damage or deformation.
If equipment is to be stored for more than two weeks prior to installation, observe the following precautions:
1. Choose a dry storage site that is reasonably level and sturdy to prevent undue stress or permanent
damage to the equipment structure or components. Do not store equipment on vibrating surface.
2. Damage to stationary bearings can occur. Set equipment off ground if in moisture prone areas.
3. Cover entire equipment with protective tarp or moisture proof cover. Extend cover under equipment
if stored on ground. Secure cover with adequate tie downs or store indoors. Be sure that all piping con
nections have protective shipping caps installed.
4. Monthly - remove cover from unit, open fan access panel, remove belt ties and rotate fan and motor
slowly by hand to redistribute the bearing grease and prevent bearing corrosion.
6
BOX-FAN
ATTENTION
Only use suitable and approved slinging devices (ropes, chains, lifting belts) for unloading and
transporting the units and fasten them to the crane lugs or transportation loops.
Unloading by Means of Crane lugs (Fig.1)
Fasten slinging device to crane lugs. If the angle of inclination between the slinging device and load is less
than 45°, then a lifting harness is to be used.
Fig-1
7
BOX-FAN
INSTALLATION
This equipment must be installed in strict accordance with any applicable local, state, and national codes
including but not limited to building, electrical, and mechanical codes. On single wall equipment, lay rigid
temporary protection, such as plywood, inside of equipment to protect insulation during installation.
Suspended Units When the equipment is to be suspended from a ceiling, a base rail, angle iron, or channel
must support the equipment.
The Dynair product line is not designed to be suspended from the top of the equipment. Before hanging the
equipment, all field assembly must be completed.
NOTE - Hanger rods must be located so that they do not interfere with access panels
Suspending Using Field Supplied Supports All field supplied structural supports must be designed to
support entire unit weight including all appurtenances, motor, drives, and all live or dead loads. All supports
must be designed to meet applicable local codes and ordinances. Each module must be supported with an
angle iron or channel. The angle iron or channel must cover the width and length of the equipment base and
must be designed to mechanically lock the unit to the field supports (see FIG-1 on page 6).
Ceiling suspended arrangement for model BOX-T HT - 7/7 till 18/18 & Box-T HT 200 till 450
Fig-2
8
BOX-FAN
CONTRACTOR SCOPE
I-BEAM
CHECKER PLATE
BOX-T (H.T)- 1000 WITH I-BEAM STRUCTURE CHECKER PLATE PLATFORM FOR INSPECTION/ MAINTENANCE
Internal Isolation
Equipment may be supplied with internal spring isolation. If so, removal of shipping hold-downs is required
before equipment start-up (see FIG 2)
External Isolation
Install vibration isolators (see FIG 3) in accordance with the job specifications and the instructions of the
isolator manufacturer base. Base rails are required for external isolation. If the coil module is also isolated,
the piping must be isolated or have a flexible connection to prevent coil header damage due to equipment
movement. All piping, wiring, ductwork and external connections must be isolated.
Service Clearance
Access to at least one side of the equipment is required for routine service, maintenance and repair.
Consideration should be given to fan shaft, coil, filter removal, motor, fan, bearings, and damper linkage
access. Clearance must meet or exceed applicable local and national codes.
Electrical Installation
1. The Electrical service to the fan must be compatible to the rated voltage on the motor nameplate, and
be in accordance with local codes.
2. The Fan segments metal casing must be connected to the buildings electrical ground on isolated units.
5. Thermal motor protection is external to the unit. Thermal protection and a disconnect switch are
provided by others.
9
BOX-FAN
STARTUP
First Time Motor Start Up
Check to see that all power to the equipment is off. Be sure that the motor shaft is disconnected from the
load, and will not cause fan rotation.
1. Make sure that the mechanical installation is secure. All bolts and nuts are tightened etc.
2. Ensure that all construction debris is removed from inside of equipment.
3. Check lubrication of fan, motor bearings and damper linkage (If available)
a) Note that all bearings are shipped completely full of grease for corrosion protection. Bearings may run
warm temporarily on startup until excess grease has discharged.
b) Check tightness of bearing setscrews or locking collars. Also, check tightness of setscrews on fan
wheel and sheave.
c) Hand operate all damper linkage, to check freedom of movement.
4. If equipment has been in storage or idle for some time, check winding insulation integrity with megger.
5. Inspect all electrical connections for proper terminations, clearance, mechanical strength and electrical
continuity.
6. Be sure that all shipping materials, braces, and construction debris are out of equipment.
7. Manually rotate motor shaft to ensure that it rotates freely.
8. Replace all panels that were removed during installation.
9. Momentarily apply power and check direction of rotation of motor shaft.
10. If motor rotation is wrong, be sure power is off and change the motor lead connections, verify rota
tion before you continue.
11. Start motor and ensure operation is smooth without excessive vibration or noise. If so, run the motor
for 1 hour with no load connected.
12. After 1 hour of operation, disconnect power and connect the load to the motor
10
BOX-FAN
• Make sure the foundation or mounting arrangement and the duct connections are adequately designed
in accordance with recognized acceptable engineering practices and with the fan manufacturer’s
recommendations.
• Ensure power and drive component such as motor starter, variable frequency drive are properly matched
and connected to the fan.
• Check the fan assembly and bearings for proper grounding to prevent static electricity discharge.
• Spin impeller to see whether it rotates freely and is not grossly out of balance. Inspect impeller for correct
rotation for the fan design.
Switch on the electrical supply and allow the fan to reach full speed.
If any problem is indicated, SWITCH OFF IMMEDIATELY. Lock out the electrical supply, secure the fan
impeller if there is a potential for wind milling (impeller turning due to a draft through the system).
Check carefully for the cause of the trouble and correct as necessary.
The fan may now be put into operation but during the first 8 hrs of running, it should be periodically
observed and checked for excessive vibration and noise. Checks should be made on motor input current,
motor and bearing temperature to ensure that they do not exceed manufacturer’s recommendation limits.
After 8 hrs of operation, the fan should be shut down to check the following items:-
WARNING: Do not touch the terminals during and immediately after the measurement as the termi-
nals are live.
Note the impeller direction of rotation shown by the arrow (if provided) located on the impeller
blades or on the fan itself. The installer must interface the machine with the required start-up/stop
controls, emergency stop, reset after an emergency stop button complying with current standards
(EN 60204-1, EN 1037, EN 1088, and EN 953).
WARNING: The fan frame must be earthed; furthermore, it must be verified that all its components
have a same potential. The installer must connect the fan to the earthen circuit and check the potential
is effectively the same on all its components before starting the machine.
11
BOX-FAN
Periodic Maintenance
General
The following checklist is provided as an abbreviated guide to periodic maintenance. Detailed procedural
information is given after this checklist.
After 48 Hours of Operation
Belts will achieve their permanent stretch and will require re-adjustment, make sure not to over-tighten.
Weekly
Observe unit weekly for any changes in running condition and unusual noise.
Every Month
Check air filters. Clean or replace if clogged or dirty.
Re-lubricate fan bearings if operating conditions include high speeds, moist or dirty air, or high
temperatures.
Every Year
• Inspect the units casing for corrosion. If damage is found, clean and paint the surface with a rust resis
tant primer.
• Clean the fan wheel and fan shaft. Remove rust (if any) with an emery cloth and apply a coat of heavy
duty rust inhibitor.
• Check damper linkages, set screws and blade adjustment. Clean, but do not lubricate, the nylon damper
rod bushings.
• Clean damper operators
• Inspect the control and power box wiring for secure connections and insulation.
12
BOX-FAN
• Rotate the fan wheel and check for obstructions in the fan housing. The wheel should not rub on the fan
housing. Adjust the wheel to center if necessary and tighten wheel setscrews to the proper torque
• Check condition of gasketing and insulation around unit, door and dampers. Repair or replace as
necessary.
• Examine flex connections for cracks or leaks. Repair or replace damaged material
Changes to the unit must only be carried out by qualified personnel. After carrying out changes (e. g.
installation of spare parts) a new assessment of conformity must be carried out in accordance with the
health and safety requirements by a qualified person with the relevant documentation before the unit is
switched back on. Spare parts must meet the specific requirements. It is preferable to use identical
original components. If inappropriate changes are made to the unit by third parties, the Maico declaration
of conformity ceases to apply.
SHUT DOWN
If standstill is for a longer period, put the rotor intermittently into operation in line with the manufacturer’s
instructions to maintain self-purification of the rotor.
Shut Down
CAUTION
Observe general safety instructions on page 4!
If the system is to be shut down for a longer period the instructions for the individual components must be
observed. Additionally it is compulsory to observe the individual component manufacturer’s information
(request if necessary)!
Disassembly, Disposal
CAUTION
Observe general safety instructions on page 4!
Only an authorized company is allowed to disassemble the unit after the service life has expired. Please
observe the safety regulations for every component as well as the component manufacturer’s instructions
to avoid any damage to persons or property.
All components and resources (e.g. oils, refrigerant, brine, and batteries) must be disposed of in line with
local regulations. All metal and plastic parts should be separated and sent for recycling.
13
BOX-FAN
Troubleshooting
Fan or motor sheave not properly tightened onto shaft Re-tightened the sheaves
Misalign sheaves Re-align the sheaves Check fan & motor sheave alignment & belt tension
Belt hitting Belt Guard Increase the belt tension
Belts are not tensioned enough and are too loose Correct belt tension
Belts too tight Change to right type
Drive Belts wrong cross section Replace belts
Arrangements
Belts worn Clean belts
Belts oily or dirty Tighten the fasteners
Belt guard is not properly fastened Tighten the fasteners
Motor, motor base or fan not securely anchored or Secured Check for leaky bearings, clean
Short belt life Belts & bearing, adjust tension & realign.
14
15
Installation
&
Operation
Maintenance
Manual
JET -FAN
INSTALLATION ......................................................................................................................... 3
START-UP / COMMISSIONING...................................................................................................4
ROUTINE MAINTENANCE......................................................................................................... 5
3
JET FANS
1. GENERAL INFORMATION
INTRODUCTION
The fully integrated JET FANS developed by DYNAIR includes three ventilation elements, some CO (carbon mon-
oxide) detection sensors, a control panel and a CFD analysis: these are the essential requirements to design the
most suitable ventilation system for a specific car
.
The system is based on placing a set of axial impulse fans JET FANS all along the parking area, which operates in
a similar way to a ducted system: when installed on the ceiling, they move the air from top layers to bottom layers
towards the exhaust areas; by effectively creating a continuous air flow, the fans are able to thoroughly cleanse
the air at the bottom and the top layers of the car park, avoiding the creation of areas where air gets trapped.
The fan assembly is manufactured and aligned specifically to fulfill the requirement of the installation for which
it was designed. No deviation from the original requirement should be implemented without referring to manu-
facturer.
2.1TRANSPORT
All fans are packaged in cardboard boxes or fixed on pallets to easy their transport. The manufacturer shall be
responsible till the time of loading. Transport must be carried out in total safety, the haulier is responsible for
suitability of securing the load. The fan should be moved by equipment, as prescribed by directive 89/391/EEC
and later directives. Manual handling from the ground is specified by directive 89/391/EEC and later directives. A
weight of up to 20 Kg is generally accepted when lifted below the shoulder but above the ground level.
4
JET FANS
WARNING: When handling objects over long distances and uneven ground, the impeller must be
locked in position to avoid vibrations from damaging the bearing races.
When handling the fans particularly in adverse environment such as when travelling on a ship or on uneven
grounds or when lifting the fans with a crane to reach elevated installation sites, all warranties supplied will
become void for drive parts and more specifically for bearings and mountings, if they are not suitably protected.
Ask the manufacturer for any clarification. The transport position specified by the manufacturer for the fans or its
single components must be as per manufacturer instructions.
2.2 ACCEPTANCE
All fans are tested, balanced and inspected before shipping. The fan is identified from the data printed on the
identification label affixed to the fan itself.
The fan is supplied with legally required warranty. (The warranty starts from delivery date and covers all faults
caused by poor workmanship or construction faults) as per MGU warranty terms.
If, when the goods are received, damages are noticed, they must be immediately reported to the haulier and to the
manufacturer. The manufacturer shall not be held responsible for damages caused during transport. Damaged
fans should not be used or repaired, as this would make all warranties void. Check that the fan matches with the
order (design, rotation, power and polarity of the motor installed, accessories, etc.). No non-conforming returns
will be accepted after installation has taken place.
WARNING: All range of fans are installed with all safety devices in compliance with current stan
dards, available on request (see technical data sheet). The manufacturer shall not be responsible
for damages to things and injuries to people caused by missing safety devices, nor shall it be respon
sible for any damages caused by misuse and/or failure to adhere to the instructions described
in this manual.
2.3 STORAGE
Short Term Storage
As soon as the fan is received at site, the complete fan unit and/or different parts of the fans should be placed in
a well ventilated and dry area, preferably under a shed.
Avoid the fan from being subject to knocks, which could damage it.
5
JET FANS
Do not store fans near machines which generate vibrations, to avoid the bearings from being subject
to the same type of stresses. Special care must be taken while handling large impellers or shafts,
when they are received disassembled for transport reasons, to avoid balancing problems. The manu
facturer shall not be responsible for damages to drive parts caused by prolonged fan inactivity.
3. INSTALLATION
3.1 INSTALLATION
Use lifting equipment’s suitable for the fan weight and size.
Use tie rods of suitable length and of the right quantity and latch them in the slots provided on the fan frames. If
necessary, use the motor lifting eye bolt in order to avoid the load imbalance if the motor weight is significant. It
is strictly forbidden to lift the whole fan using only the motor latching points.
Do not lift the fan from shaft, motor or impeller. The machine is normally shipped preassembled, fixed on a pallet
and protected from being damaged. Only use the latching points provided for lifting the fan by evenly spreading
the load. Avoid uncontrolled rotations. The weight of each fan is shown in the enclosed technical data sheet.
Check the impeller has not been knocked or deformed during transport. It is securely fixed to the
rotation shaft, and is able to freely turn around its axis and that no foreign body is interfering with
the impeller operation.
The user must provide a suitable support surface for the dimensions and weight of the fan and well levelled to
avoid deformations which could damage the frame of the fan.
It is recommended to connect the fan by means of couplings that could able to reduce vibrations
generated by the fan. Securely fix the fan by inserting screws with suitable diameter and ensure all
screws are tightened, in all the fixing holes provided.
WARNING: When access to entrances (moving parts) is not ducted or protected with other means, a
safety net must befitted in compliance with standard EN ISO 12499 and later standards (accessory
supplied on request).
6
JET FANS
In order to ensure the correct operation of the fan, it is recommended to make sure certain distances are main-
tained, such as 1.5 times the impeller diameter as the distance from a wall for free mouth inlets, 2.5 times the
impeller diameter as distance from the bend from the fan bell mouth. The same apply for the inlet and outlet ducts;
please note that it is advisable that the bend have a minimum internal bend radius equal to the pipe diameter.
WARNING: Do not remove the guards; removing any of the guard even when the machine has
stopped can lead to dangerous conditions.
WARNING: Adhere to the minimum installation distance; when performing maintenance operation,
confined spaces cause hazards and problems.
The following guidelines should be adhered to when carrying out the installation:
• The surface selected to support the fan static, dynamic load and inherent frequency must be level and steady.
When the inherent fan frequency coincides with the natural frequency of the mounting, both frequencies act
alongside each other, leading to a condition of resonance: the amplitude of oscillation will increasingly grow to
infinity, and structure subjected to ever growing deformations. In this case, the fan mounting must be changed
in order to change its natural frequency of resonance. Sometimes, a resonance is generated only in transistors,
i.e. when starting or stopping machinery. Resonance must be avoided whenever possible. For industrial, high
speed fans, using reinforced concrete slabs is recommended.
• Vibration reduction component must be inserted between the fan and its interfaces i.e Floor and pipe (suitably
sized vibration mountings and anti vibration couplings). The mountings should not be fully squeezed and
should be able to support a basic frame instead of the single fan components. When selecting the mount-
ings, it is recommended to contact the manufacturer. In most cases the fans are supplied preassembled by
ensuring, the condition of the bearings, the level of the fan and, generally speaking, all components be for
installation. If the fan should be shipped disassembled for transport reasons, the manufacturer must enclose
suitable instructions to correctly assemble it; the assembling operation must be carried out by qualified per-
son. The design and execution of the connection between the fan and the power mains must be carried out by
an experienced electrician. Beyond 5.5kW, a star delta, inverter or other type of gradual start up must be fitted.
It is recommended to fit a choker valve to reduce start up power input. (The fans can have very long start-up
times and power input peaks equal to the electric motor nameplate amperage ; the whole electrical system
must be sized in relation to the corresponding duration and start-up power inputs).
7
JET FANS
Warning: Electrical connection must be carried out by qualified person staff. Check that the power voltage
values printed on the motor nameplate match with the data on the power line it is connected to. To connect the
motor, refer to the electrical diagram included in the connection box. The user must electrically connect the fan to
earth: a correct earth of the motor and the controlled machine avoids tensions and eddy currents in the bearing. It
is recommended that motor controlled by means of an electrical frequency inverter are fitted with PTC protection
thermistors against motor over temperatures. Using electrical frequency converters can increase vibrations and
noise levels.
WARNING: In case a fan is installed away from the control panel and/or location, a service multiple switches
must be provided near the fan itself (accessory supplied on request). In fact, routine maintenance operations
may require the fan guards to be removed. Given the high risk associated to this condition, in compliance with
Standard EN ISO 12499 relating to fan mechanical safety, another switch must be fitted near the fan to allow
maintenance engineers to directly control the power supply connected to the fan. Select the safety system and
the power cables (voltage reduction during the start-up stage must be less than 3%) according to the technical
features printed on nameplate.
In the event of fire, the range of fumes and heat extractor fans must be fitted with an automatic and separately
activated safety electrical system. Make the connection according to the diagram shown on the nameplate or
contained in the terminal box. Tightened the nuts fitted on the terminals, cables end power cables to the torque
value (Nm) according to the table below.
Do not insert washer or Nuts between motor cable ends and input cable end.
WARNING: It is compulsory for the installer to connect the fan to the electrical power supply and to install it in the
environment where it will be used in compliance with current standards (IEC 60364).
Thermal cut outs: check the type of cut out installed before carrying out the connection; for thermistors, a special
release relay is required.
WARNING: To use thermal cut outs, take the required measures in order to avoid hazards associated with a sud-
den re-start. Any anti condensation resistors (heaters) must be supplied by separate power lines. They cannot be
powered with the motor in operation. Do not connect the motor in case of doubts on how to interpret the connec-
tion diagram or, if the connection diagram is missing, contact the manufacturer. All motors used are full voltage
direct start type or delta-triangle start type for powers higher than 5.5kW. In any case, the connection diagram
provided with the motor is the diagram to be followed, which is inside the motor connection box.
8
JET FANS
MOTOR TERMINALS
• All the impellers installed on the fans are balanced in compliance with standard ISO 14694 “Industrial fans
Specification for the balance quality and vibration level” and with the standard ISO 1940-1.
• The fan vibration level is then tested, still in compliance with standard ISO 1940-1.
• The in situ vibration level check must be carried out in compliance with standard ISO 14694, according to the
respective fan category and within the limits.
9
JET FANS
4. START-UP / COMMISSIONING
A complete inspection should be made of all installation and the fan interior. Make sure there is no foreign ma-
terial, which can be drawn into or blown through the fan. Appropriate protective measures and safety practices
should be observed when entering or working within these areas. There measures may include the use of gog-
gles, respirators or other personal protective devices. Before putting any fan into initial operation the manufac-
turer’s instruction must be followed. Complete the following checklist to make sure that the fan is ready to run.
Switch on the electrical supply and allow the fan to reach full speed.
Check carefully for :-
• Excessive vibration
• Unusual noise
• Proper amperage and voltage values
If any problem is indicated, SWITCH OFF IMMEDIATELY. Lock out the electrical supply, secure the fan impeller
if there is a potential for wind milling (impeller turning due to a draft through the system). Check carefully for the
cause of the trouble and correct as necessary.
The fan may now be put into operation but during the first 8 hrs of running, it should be periodically observed and
checked for excessive vibration and noise. Checks should be make of motor input current and motor & bearing
temperature to ensure that they do not exceed manufacturer’s recommendation. After 8 hrs of operation, the fan
should be shut down to check the following items:-
WARNING: Do not touch the terminals during and immediately after the measurement as the terminals are live.
Note the impeller direction of rotation shown by the arrow (if provided) located on the impeller blades or on the
fan itself. The installer must interface the machine with the required start-up/stop controls, emergency stop, reset
after an emergency stop b complying with current standards (EN 60204-1, EN 1037, EN 1088, and EN 953).
WARNING: The fan frame must be earthed; furthermore, it must be verified that all its components have a same
potential. The installer must connect the fan to the earthen circuit and check the potential is effectively the same
on all its components before starting the machine.
10
4.1 OPERATIONS TO CARRY OUT BEFORE START-UP:
• Check the tightness of all nuts and bolts (with special attention to the locking screws of the impeller on the
shaft, motor and mountings) and the alignment.
• Check that the fan blade turns freely by turning it manually.
• Check that any shutter or flow regulators are in open position for axial fans, closed for centrifugal fans. Start-
up stage, this operation avoids dangerous motor overload.
• Check the lubrication of moving parts.
• Check the insulation resistance between winding and earth. This must be with winding at 25 ˚C higher than
10 MΩ. Lower value normally indicated that the there is a condensation in the winding. In such cases, ask a
specialised company to dry it.
WARNING: Do not touch the terminals during and immediately after the measurement as the terminals are live.
Note the impeller direction of rotation shown by the arrow (if provided) located on the impeller blades or on the
fan itself.
The installer must interface the machine with the required start-up/stop controls, emergency stop,
reset after an emergency stop by complying with current standards (EN 60204-1, EN 1037, EN
1088, and EN 953).
WARNING: The fan frame must be earthed; furthermore, it must be verified that all its components have a same
potential.
The installer must connect the fan to the earthen circuit and check the potential is effectively the same on all its
components before starting the machine.
• Check the input current does not exceed the current shown on the product identification label and motor
name plate.
• To have reliable information, allow a reasonable period of stabilizing time. In the delta/triangle connection, the
reading must be carried out upstream of the change-over switch; if this is not possible, detect the live current
on any of the six wires at the terminal box and multiply this value by 1,73. Avoid consecutive start-ups of
the motor as this would cause continuous overloads, and overheat the electrical parts. Before start-up, allow
enough time to cool down.
• Check the bearing temperature after the first hour of operation, as these are the most critical. If necessary,
stop the fan and restarts it only after reaching the ambient temperature. Then check that the temperature is
lower than the previously measured temperature.
• By means of a vibrometer check that the vibrations arc not excessive by referring to the following paragraph.
After a few hours of operation, check that the vibrations have not slackened the tightness of the nuts.
11
5. ROUTINE MAINTENANCE
Periodic inspection of all the fan parts is the key to good maintenance and trouble free fan operation. Frequency
of inspection must be determine by the user and its depend upon the severity of the application. Prepare mainte-
nance schedule and make sure it is strictly adhere too.
Maintenance operations of fans are relatively simple, but they still require routine operations aimed to maintain
their efficiency of all their components and to avoid the damages which would negatively affect their good working
order and people safety. The interval of maintenance operations depends on the fan effective operating conditions.
In ideal and continuous operating conditions, it is advisable to do a maintenance once after the first 100 hours of
operation, then every 3000hours for directly coupled fans.
When removing any dust from inside the machine or cleaning the filter make sure not to disperse it in the sur-
rounding environment.
NEVER SERVICE OR ADJUST ROTATING EQUIPMENT WHILE IT IS IN OPERATION. LOCK OUT THE POWER
SOURCE BEFORE PERFORMING MAINTENANCE.
• Maintenance should always be performed by experienced and trained personnel. Do not attempt any mainte
nance on a fan unless the electrical supply has been locked out or tagged out and the impeller has been se
cured.
• Under normal circumstances, handling clean air, the system should require cleaning only once in a Year. How
ever, the fan and system should be checked at regular intervals to detect any unusual accumulation.
• The fan impeller should be specially checked for build-up of material or dirt which may cause an Imbalance
with resulting undue wear on bearings and belt drives. A regular maintenance program should be established
as needed to prevent material build-up.
• Periodic inspection of the rotating assembly must be made to detect any indication of weakening of the rotor
because of corrosion, erosion, or metal fatigue.
5.1 Impeller:
It is recommended to constantly check that the impeller is clean. If layers of material, dust, greasy substances
etc. should build up on the impeller, they would cause it to get unbalanced and would lead to damages to drive
parts and/or to the electric motor.
5.2 Motor:
The motor must always be kept in clean conditions so that it does not have any traces of dust, dirt or other im-
purities. Periodically check that it works without vibration or abnormal noises, that the ventilation circuit inlet (if
present) is not obstructed, leading to potential overheating of the windings.
12
5.3 Bearings (Motor Bearings):
The motors we use are fitted with life lubricated watertight bearings, which do not require lubrication. Their life
varies according to the actual operating conditions (number of start-ups etc.) and the operating ambient condi-
tions (temperature, presence of dust etc.). Our fans are sized in order to give at least 20,000 hours of operation
(according to the model) for continuous operation, in ideal environment and conditions.
During the cleaning stages, the user must select suitable products to the type of system and to the safety data-
sheet of the conveyed product.
Before starting the fan, make sure no metal foreign bodies are left inside the fan body. Repeat the required oper-
ations before and after start-up.
and the adjacent wall, between the shaft passage and seal have not decreased or changed in any way.
• The screw could have come loose and fan realignment may be required.
• The fan may go deformed and some components or the whole fan may need replacing.
Carry out maintenance operations only with the machine switched off. As for maintenance operations, the user
must ensure that the tools and equipment used are of a suitable class for the environment. If the machine main-
tenance requires some hot processes, thoroughly clean it before starting the work.
5.5 UNSCHEDULED MAINTENANCE
Fan special application some time required specific unscheduled maintenance operations. Such as replace the
impeller or motor. Unscheduled maintenance operation must be carried out only by qualified staff, which must
follow specific instruction provided by manufacturer, according to the type of fan or operation. After carrying out
any type of unscheduled maintenance operation, the start-up procedures described in startup section must be
repeated.
For any operation to be carried out on the machine (maintenance and cleaning), the operators must wear the
required personal protective equipment (PPE).
Safety goggles/safety glasses: indispensable when using powered tools and equipment like drilling Machine to
protect you from flying debris
13
6. OPERATING PROBLEMS / TROUBLE SHOOTING
Bear in mind that if and an aeraulic system is not working, there may be more than one cause. All causes must
be identified and systematically removed.
14
JET FANS
7. RECOMMENDED SPARES
The following spare parts are recommended to be kept as a stand by for two year normal operating condition.
• Impeller
• Motor
• Bolted wearing strips
• Scroll liners
• Hardware
Note: While Ordering for fan spares please mention Dynair Reference number and fan type from the name plate
of existing fan.
15