Sertifikat & MSDS
Dhenolic Resin BoardTEST REPORT: SO9CHMO01188-THY-CORRO1 .
con corms taestmnorraccrereans (a
Client's Ret: OCBC 601173 Email: Jianhua. IN@tuv-sud-psb.sg_
Note: Tie cpr is tan stp to TOV S00 PB “Tors and Condens Governing Tecra! Sanoes. eee
squire mete
‘SUBJECT
eins
rants anaeereseor detain sis ata
SUIENT
Wholesome (S) Pte Lic
SET am
Enterprise Hub
Sez tle
Attn: Mr Wilfred Tan
DESCRIPTION OF SAMPLE
‘Six pieces of the sample labeled as follows were received on 13 Mar 2008 and 23 mar 2008,
1. RESISTOP High Pressure Laminates
Chemical Resistant
Dust Grey (805)
DATE OF ANALYSIS
25 Mar 2008-02 Apr 2008
METHOD OF TEST
Chemical Resistance Test
The sample was analysed according to the mettiod provided by the client- NEMA LD3-2000:
= Five'drops of each chemical reagent was applied onto the sample surface.
= The sample was then kept at room temperature for 24 hours,
= After rinsing with water, the sample surface was evaluated by visual observation for any change.
otal 36 chemical reagents were tested (see Table 1).
| appease
2 1 MAR 2015
£4 aoceg
PSB TEST.
trata: Prone 5605 18 Regonl Hest once:
‘Tovs0o Pepe ts Fox seerreasr ‘TOVS00 ata Pace ei
Tearyseven la hana essesg Sst et ove SOLD
tot SeoraPek one wentuudot 9g Inoranan Seppe 1223
Sess 121 ng ware oe Page toa