Professional Documents
Culture Documents
Emergency Pressure Relief Valve: Special Features and Advantages
Emergency Pressure Relief Valve: Special Features and Advantages
PROTEGO® ER/V
Pressure settings: • the set pressure is close to the opening pressure which
results in best possible pressure management of the system
DN 200 to DN 350: +5 mbar up to +40 mbar
+2 inch W.C. up to +16 inch W.C. • high flow capacity
DN 400 to DN 700: +5 mbar up to +25 mbar • the valve pallet is guided within the housing to protect
+2 inch W.C. up to +10 inch W.C. against harsh weather conditions
For higher pressure settings, see types ER/VH and ER/V-F.
• can be used in areas subject to explosion hazards
Function and Description • reinforced design
®
The ER/V type PROTEGO valve is a highly developed emer- • safely secured housing cover
gency pressure relief valve with high flow capacity. It is primarily
• best technology for API-tanks
used as a safety device for emergency pressure relief for storage
tanks, containers, silos, and process engineering equipment; it Design Types and Specifications
offers reliable protection against overpressure and prevents im-
permissible product vapor loss close to the set pressure. It is de- The valve pallet is weight-loaded. Higher pressures are
signed to relief particularly large amounts to prevent the vessel achieved with levers (see ER/VH) or with spring-loading
from rupturing in an emergency case. (see ER/V-F).
Pressure valve in basic design ER/V
The device will start to open as soon as the set pressure is
reached and only requires 10% overpressure to full lift. Con- Additional special devices available
tinuous investments into research and development have al- upon request
All rights and alterations reserved acc. ISO 16016 - Active data sheet at www.protego.de
262 KA / 5 / 0412 / GB
Table 3: Flange connection type
EN 1092-1, Form B1 or DIN 2501, Form C, PN 10 EN or DIN
other types upon request
ANSI 150 lbs RFSF ANSI
on
e ecti
l siz sure o nn
i na rial res ec
pe om ate et
p
l a ng e
Ty N M S F typ
— — — — —
ER/V – – – / –
— — —
.1 .2 r] — .] .3
—
Ta
b Ta
b ba W.C b
g[
m ch Ta
e ttin ng [in
S tti
Se
Order example
.
flow rate V [m³/h] 1429-L
The flow capacity chart has been determined with a calibrated and TÜV certified flow capacity test rig.
.
Volume flow V in [m³/h] and CFH refer to the standard reference conditions of air ISO 6358 (20°C, 1bar).
Conversion to other densities and temperatures refer to Vol. 1: “Technical Fundamentals”.
KA / 5 / 0412 / GB 263