Professional Documents
Culture Documents
Ayush Garg Resume 2023 - R2
Ayush Garg Resume 2023 - R2
Research Interests:
● Steel Connections.
● Concrete Filled Steel Tubes.
● Analysis and Design of Steel and Composite Structures.
● Advanced Numerical Modelling for Steel Connections
● Structural Fire Engineering
Industrial Experience:
Manager Structures (Nov, 2021 – Jan, 2023)
DMR Hydro-Engineering & Infrastructures Ltd, Faridabad, Haryana
Projects
3) The project is very challenging and complicated, DMR scope in this project is very
limited but valuable. DMR is reviewing the design of civil structures as well as hydro-
mechanical components.
4) Reviewed powerhouse structure, bypass fall design, excavation drawings, many geo-
technical reports and much more till now.
1
CURRICULUM VITAE AYUSH GARG
1) This special economic zone project is located in katsina (Northern city of Nigeria).
2) In 20 days site visit, Cost Estimation of different structures including Roads, Drainage
Structures, Water treatment plant, sewage treatment plant,gate structure, culverts and
control building was found out.
3) Design of pump house and underground water tank was also done using software and
manual calculations.
Mandi Tunnel Project
1) DMR is the design consultant in this project.
2) Design and analysis of Control building, underground water tank, Shaft, PEB Buildings
was done by staad pro and Midas FEA software.
Teesta VI Project
2) Design and analysis of slope stability structures including pile wall, waler beams,
soil nails, rock anchor design and shotcrete.
2) Our scope is to design and analysis of Block 3 of this dam using Midas FEA software.
3) The complex geometry of this block make this project complicated and challenging.
4) Dynamic analysis was done using Time history data provided by IIT Roorkee.
1) This ongoing irrigation purpose project is located on river Tawi, Jammu district of UT
J&K. DMR is Department consultant as well as Civil structure designer.
2) Design and analysis of Barrage Piers was done using Midas FEA software and stability of
the same was found out by manual excel calculations.
3) U/S and D/S protections work was done by using different IS Codes.
4) Abutment and wing wall design and stability are in progress and yet to be approved by
IIT Roorkee.
2
CURRICULUM VITAE AYUSH GARG
2) Computed loads and material stresses to determine optimal design specifications for
foundations and superstructure.
3) Used engineering judgment to appraise different options and recommend most suitable
choice for issues. Drafted technical reports outlining requirements for new, remedial and
improvement projects.
1) Used CAD software to create models and simulations for use by manufacturing team.
Surveyed sites, collected measurements and assessed project conditions.
2) Directed surveyors, drafters and junior engineers through project stages to successful
completion. Prepared project proposals, specifications, cost estimates and schedules.
3) Supervising team members in preparation and implementation of drawings and
documents for projects. Determined strengths and properties of construction materials
stress analyses and analytical mechanics.
4) Cost Estimation of more than 20 steel structures including Module Mounting Structure;
Industry Buildings; crane girders and hangers.
5) Design of steel structures using modern software tools and manual calculations.
1) Design and analyze the mezzanine floors for heavy machines used in different fabric
cleaning process.
2) Design 2 steel mezzanine structures within the existing RCC Structures having an
overall load of 130 ton on both mezzanines.
1) Produced blueprints and structural diagrams for building projects with staad pro and
excel. Attended regular meetings with lead engineers to keep updated on project
priorities and progress.
2) Continuously developed engineering knowledge and skills by observing colleagues,
attending training and practice.
3
CURRICULUM VITAE AYUSH GARG
3) Design and analysis of many important RCC and Steel structures (including ITC Trichy
and ITC Kapurthala) using software as well as by manual calculations.
4) Analyze and Design hanger having a width of 100 m for ARMY, in Assam
1) Working as a proof check consultant in 1.15 MWp Grid Interactive Solar PV Power
Project at Aland Taluka, Kalaburagi District, Karnataka for M/s Ambizione
infrastructure Pvt. Ltd.
2) Design and analysis of a concrete industrial building for the textile firm based in Hapur,
Uttar Pradesh.
3) Design and Analysis of Pre Engineered Building for ASA group based in Noida.
4) Working as a design Engineer in the Chalawa Hydropower Project located in Kano state
of Nigeria.
Skills
Estimation and Design, Staad Pro, Midas FEA NX, Pipe Flow Expert, Managerial Aptitude,
Documentation, RCDC, MATLAB, MIDAS Civil.
Membership
● INCOLD member: International Commission on large dams.