Professional Documents
Culture Documents
Cams - 2023 C20
Cams - 2023 C20
Cams - 2023 C20
C20-M–506
*
7660
BOARD DIPLOMA EXAMINATION, (C-20)
MAY/JUNE—2023
PART—A 3×10=30
www.manaresults.co.in
PART—B 8×5=40
*
Instructions : (1) Answer all questions.
(2) Each question carries eight marks.
(3) Answers should be comprehensive and criterion for
valuation is the content but not the length of the answer.
(OR)
(b) What are the types of numerical control modes? Explain each one
with a neat sketch.
12. (a) List out the statements used in APT. Write any four differences
between manual programming and computer aided part programming.
(OR)
13. (a) Draw neat sketch of an industrial robot and explain the function of
each component.
(OR)
14. (a) Explain the various types of flexibilities defined under FMS.
* (OR)
(b) What are the various modules of CIMS? Explain any two of them
with illustration.
15. (a) Explain SLS (Selective Laser Sintering) rapid prototyping technique
with a neat sketch.
(OR)
www.manaresults.co.in
PART—C 10×1=10
Instructions :
*
(1) Answer the following question.
(2) The question carries ten marks.
(3) Answer should be comprehensive and the criterion for
valuation is the content but not the length of the answer.
16. Write a CNC program using appropriate G and M codes to turn component
as shown in figure below. (Without using canned cycle)
*
/7660 3 AA23–PDF
www.manaresults.co.in