Professional Documents
Culture Documents
16A2093-C0006 - Reve EQUIPMENT AND PIPELINE NUMBERING
16A2093-C0006 - Reve EQUIPMENT AND PIPELINE NUMBERING
P.O.Box 4 (Jaakonkatu 3)
FIN-01621 Vantaa
Finland
Domicile Vantaa, Finland
Technical project instruction Business ID. 1071411-1
Tel. +358 9 894 71
Fax +358 9 878 1818
Date 10.01.2005
7.11.2005 Rev.E
Ref. No 16A2093-C0006
Page 1 (+11)
Oy Metsä-Botnia Ab Contact Rauno Ylösmäki
Project Orion Direct dial +358 9 8947 2258
Direct fax +358 9 878 1831
E-mail 16a2093@poyry.fi
C6 EQUIPMENT- AND PIPELINE NUMBERING
Distribution MB/1
JPH/MIT MAJ SL RY RJK ATA Files
CONTENT 1 General
2 Position number
3 Pipeline number
1
GENERAL
2
POSITION NUMBER
Example: 122K206
│ │ │ Running number
│ │ └───────
│ │ Equipment group character
│ └───────────────
│ Department number
└──────
DEPARTMENT NUMBER
A = instruments
B = agitators
C = conveyors, transport equipment
D = drives, gears
E = electrical equipment
F = process air-conditioning equipment, gas and combustion
gas handling equipment
G = ventilation and heating system equipment (HVAC)
H = hydraulic- and lubrication equipment
L = cranes, hoisting equipment, lifts
3 (11)
RUNNING NUMBER
Examples:
- Department number
- Pump equipment group character P
- Running number
Example: 122P006
│││
│ │ │ Running number
│ │ └───────
│ │ Pump equipment group character P
│ └─────────
│ Department number
└──────
Example:
- Department number
- Tank/agitator equipment group character T/B
- Running number
Example: 126T006
│││
│ │ │ Running number
│ │ └───────
│ │ Tank equipment group character T
│ └──────────
│ Department number
└──────
126T006
126B011
- Department number
- HVAC equipment group character G
- Running number
Example: 120G006
│ │ │ Running number
│ │ └───────
│ │ HVAC equipment group character G
│ └───────
│ Department number
└──────
On mill blocks (10, 20, 30, 40, 70 or 80) number series 500-999 are left
unused when process equipment are numbered. Number series 500-
6 (11)
999 are reserved only for electrical equipment and control circuits (for
example lighting feeds, emergency and telecommunication equipment).
Example: 121V0006
│ │ │ Running number
│ │ └───────
│ │ Valve and fitting equipment group number V
│ └──────────────
│ Department number
└──────
In addition to the valve and fitting position number in the flow diagram
shalI be marked:
3
PIPELINE NUMBER
Example: 1210006
│ │
│ │ Running number
│ └───────
│ Department number
└──────
Example: 1210006-PBB-400-4H1A
│ │ │ │ Pipe class
│ │ │ └─────
│ │ │ Nominal pipe size
│ │ └──────────
│ │ Flow substance code
│ └──────────
│ Pipeline number
└────────
All headers and their branches shall have own line numbers. However,
short secondary branches need not to be numbered separately.
8 (11)
Also pump suction side nozzle shall have an own line number if it’s pipe
class is not the same as the pipe class of the pump pressure side.
Borderline shall be marked in the flow sheet at the place where the
department number changes in the pipeline number.
Example
The example above shows only the principle how to create line
numbers for headers and branch pipes using department and running
number.
At the left side of the picture the header and the branch pipe are
situated at the same department and the department numbers are the
same for the header and the branch pipes.
At the right side of the picture the starting point of the header is in a
different department than the branch pipe. The border line at the
branching point and the change of the department number in the
pipeline numbers are shown.
The flow substance code shall be taken from the list of flow substances
S17.