Professional Documents
Culture Documents
Screed - SPECS
Screed - SPECS
B. Close areas to traffic during screed application and for appropriate time period after applica-
tion as recommended in writing by manufacturer.
1.7 COORDINATION
PART 2 - PRODUCTS
A. Cement: ASTM C 150, Type 1 or BS EN 197-1, ordinary Portland cement of gray color,
42.5 N.
1. Sand: Grading and fine limits according to approved design mix, but with 100% pass-
ing sieve size 4.76 mm sieve.
2. Aggregates for Fine Concrete Screeds: 10 mm maximum aggregate size.
C. Water: BS EN 1008: 2002 or BS 3148 except for bacteriological limits, potable and at a
temperature of not more than 21 ºC.
D. Acrylic-Bonding Agent: ASTM C 1059, Type II, non-redispersible, acrylic emulsion or sty-
rene butadiene.
2.2 REINFORCEMENT
B. Welded Steel Fabric Reinforcement (Metal Reinforcement): Welded steel fabric for rein-
forcement of concrete or screed as follows: