Professional Documents
Culture Documents
HDB 850
HDB 850
HDB 850
4. Troubleshooting ----------------------------------------------------------------------------------------------------12
5. Specifications -------------------------------------------------------------------------------------------------------13
1. Read these instructions. 3.MENU Show the main menu on the screen or jump back to previous menu
1
2. Keep these instructions. 5 from sub-menu
4.MUTE Enable or disable the audio output
3. Heed all warnings.
5.0-9 Select channels or enter programming
4. Follow all instructions.
6.EXIT Exit from the current menu and stop adjusting settings
5. Clean only with a dry cloth. 7.OK Confirm the selected item in the menu screen or show the channel list
6. Do not block any of the ventilation openings. Install in accordance with the manufacturer's 14 8.CH+/CH-(▲)(▼) Channel change or move cursor up or down
11
instructions. 13 9.VOL+/VOL-(▶)(◀) Volume Control or move cursor left or right
Control and Functions
Unit Operation
12. Unplug this apparatus during lightning storms or when unused for long periods of time. 25 29
19. Stop playback or recording
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has 28 27
20. Fast forward
been damaged in any way.
12 21. Fast backward
22. Switch to next Item
This symbol indicates that dangerous voltage instituting a risk of electric shock is 23. Switch to previous Item
present within this device. 24.REC LIST Hot key for PVR file list
25.GOTO To locate a position to play in multimedia playback
26.SCH.LIST To display the schedule plan
Troubleshooting
Troubleshooting
This symbol indicates that there are important operation and maintenance instructions 27.ASPECT Switch between different screen aspects(4:3 and 16:9)
in the documentation accompanying this device. 28.A-B To start A-B looping playback during video playback: Press this button
once to mark Point A. Press again to mark Point B. Points A to B will
be looped until PLAY or STOP is pressed.
NOTE:
29.FORMAT Switch between the different resolutions
! To prevent damage which may result in fire or hazards, do not expose the device to rain or liquids.
! Do not place objects containing liquids, such as vases on the device. If drinks and liquids have been
spilled on the device, unplug the device from AC power immediately and contact the TEAC
Customer Hotline for assistance.
! Servicing of this device should be conducted by qualified and certified TEAC service personnel.
Specifications
Specifications
! The manufacturer will not be held responsible for any damage caused by modifications done on the
device without authorisation from the manufacturer's authorised service agent.
1.2 Accessories
1.Remote Control 4.Quick start guide
2.AAA batteries for remote control x2 5.Contact card with serial number
3.User manual 6.AV cables
2 3
TV Aerial
Television
4 3 1 2
KEY FUNCTION
Amplifier
1. Turn on/off receiver
2. Channel change(Up/Down)
3. USB port Connect a compatible USB memory device for
Control and Functions
Unit Operation
! Fully compliant with DVB-T standard
! Green Power(Standby<0.5W or <1W) supported
! 1080p/1080i/720p/570p/480p/576i/480i YPbPr/RGB component output supported
! HDMI 1.3 transmitter output interface with embedded or external HDCP key
! Resolution up to 1080p@60Hz
! PVR function supported,recording TV and playback media files with external storage devices (USB
stick / USB HDD)
! Supporting pictures with JPEG,BMP,PNG
Troubleshooting
Troubleshooting
1 2 6 5 7 ! Supporting music files with WMA、MP3、AAC (.wma, .mp3, m4a)
! Supporting movie files with MPEG1/MPEG2/H.264/VC-1/Motion JPEG
(.flv/.rm/.rmvb/.avi/.mpg/.dat/.vob/.mov/.mkv/.mjpeg/.ts/.trp)
CONNECTOR FUNCTION ! Capable of playing picture and music at the same time
1.RF IN Connect to terrestrial antenna
2.RF OUT RF signal loop out
3.VIDEO Connect to the TV’s CVBS port
4.AUDIO R/L Connect to the TV’s audio port
Specifications
Specifications
5.Y/Pb/Pr Connect to TV's Y/Pr/Pb ports
6.HDMI Connect to TV’s HDMI port
7.COAXIAL Connect to the TV for digital audio output
4 5
Unit Operation
a. In 'Channel No.', press Left or Right to chose a channel, or Auto, 4:3 Full, 4:3 Letter Box, 4:3 Pan&Scan, 16:9 Wide Screen, 16:9
Pan&Scan, 16:9 PillarBox;
b. In Frequency, enter the frequency value directly and in Bandwidth,
press Left or Right to set a desired bandwidth to scan for a channel Press Left and Right to chose and press OK to confirm.
When a channel is selected, if there is enough signal, it will be
indicated in the Quality bar. Then press OK to confirm search. 3.4.2 Resolution
Press Left and Right to chose and press OK to choose the following
options: 480i(NTSC), 480p(NTSC), 576i, 576p, 720p, 1080i, 1080P
3.3 Program
Press MENU, then press Right/Left to chose 'Program', press OK to
Troubleshooting
Troubleshooting
enter this menu to edit channels, press EXIT to quit; 3.4.3 TV Format
In this menu, press Up and Down to chose Program Edit, EPG, Sort, Press Left and Right to chose and press OK to confirm following options:
LCN items as desired. PAL, NTSC.
Specifications
! Lock(Yellow key): lock one or more channels to password access 3.5.1 Time Offset
only; ! Time offset can be set to Auto or Manual. Press Left and Right to
! Delete(Blue key): Delete one or more channels; chose and press OK to confirm your choice.
! Fav(Fav key): Mark one or more channels as favourite channels; ! When Auto is chosen, Country Region needs to be confirmed, press
! Rename(Recall key): rename a channel; Left and Right to chose and press OK to confirm the option.
! When Manual is chosen, Time Zone needs to be confirmed, press Left and Right to chose and
press OK to confirm the option.
! 3.3.2 EPG
EPG allows channel and programme list navigation, as well as other
6 7
Unit Operation
3.6.5 Audio Description
3.8 USB
Press Left/Right keys to adjust the volume level.
In this menu, user can activate or set up multimedia, photo configure,
Note: movie configure, PVR configure.
Audio description refers to an additional narration track for the blind and visually impaired consumers Press Up and Down to select an item, press OK to enter its operation
of visual media. It consists of a narrator talking through the presentation, describing what is happening or setup.
on the screen during the natural pauses in the audio, and sometimes during dialogue if deemed
necessary. This function only can be activated when a programme contains an additional narration The unit will only support a USB
Troubleshooting
Troubleshooting
track. device with a FAT32 file system. It will not support NTFS file
system.
3.7 System
3.8.1 Multimedia
Use this menu to set up Program Block, Restore Factory Default,
There are four functions to choose before playback:
Information, Software Update functions. Press Up and down to select a
item, press OK to enter a item's setup or operation. Music, Photo, Movie, PVR (playback recorded programmes).
Press Left and Right to chose and press OK to activate a function.
3.7.1 Block Program !Music
Specifications
Specifications
Blocked channels trigger a password prompt. The channel is viewable Press Up and Down to chose a music file. Press OK to play, press
only after the correct password is keyed in. Recall to return.
Default password is 000000. ! Photo
Press Left and Right to chose and press OK to confirm Programme Press Up and Down to chose a Photo file to preview. Press OK to play,
parental control level: press Recall to return.
Block off, P and above, C and above, G and above, PG and above, M Press the Play key to view all pictures in a slide show, press Recall to return to thumbnail view.
and above, MA15 and above,AV15 and above, R and above, Block All ! Movie
etc. Press Up and Down to chose a movie file, press the Red key to preview, press OK to full screen, press
Recall to return.
8 9
Unit Operation
cancel.
3.8.4 PVR Configure ! If the unit is on Standby mode, the scheduled recording will still
In this menu, there are two items to setup or display USB memory proceed without the need to switch on the TV. You are also able to switch on the TV midway
device's information: recording and proceed to view the program that is being recorded.
Record Device: Set up record USB memory device and timeshift size;
Format: Format USB memory device; 3.11 Scheduled Recording
Press Up and Down to chose a item, and press OK to enter the item.
You can book programs for recording when a USB deice is connected to the USB socket on the front
! Record Device panel.
Troubleshooting
Troubleshooting
Disk: Press Left and Right to chose a USB memory device's disk. Enter EPG by pressing the EPG key. Select the program you wish to record using the LEFT/RIGHT
Timeshift Size: Press Left and Right to configure time shift memory keys and the UP/DOWN keys to highlight the program.
size(0.5/1/1.5/2.0/2.5/3.0/3.5/4.0GB). Press the OK key to book the highlighted program for recording. A schedule window will appear that
! Format allows you to adjust the recording parameters as follows:
Format: Press Left and Right to chose a USB memory device's disk to be formatted. Channel type: Select the recording for TV or Radio.
File System: Press Left and Right to chose a file system(NTSC/FAT32) to be formatted. Channel Number: Specify the channel by number.
After setting the format configuration, select Format and press OK to confirm and start the format Name: This displays the name of the channel selected above, can only be changed by selecting
operation. Press OK to continue, press Exit to cancel. another channel number.
NOTE: Start Date: Select the starting date of the recording in DD/MM/YYYY format.
Specifications
Specifications
! Formatting will erase all data on the hard disk. Please back up all valuable data before formatting a disk. TEAC does not Start Time: Set the start time for the recording in HH:MM
take any responsibility for loss of data.
! To obtain maximum performance for PVR functions, a USB 2.0 device is required. Please use a dedicated USB device for End Time: Set the end time of the recording HH:MM
PVR functions. Do not edit recorded files on a PC. Before using the USB device for the first time, please format it. All data will Repeat: You can select how often you would like the recording to occur:
be lost when formatting, please ensure that all valuable data is not within the USB device.
Once/Daily/Weekly
NOTE:
! TEAC cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and TEAC holds no Mode: You can select RECORD to make the unit record according to your previous settings or select
responsibility for any loss of data that may occur when connected to this unit. View to change to another channel at the specified times.
! With large amounts of data, it may take longer for the system to read the contents of a USB device.
! Some USB devices and external hard drives may not be properly recognized.
Use the UP/DOWN/RIGHT/LEFT keys to navigate through the schedule window and adjust the
! Even when they are in a supported format, some files may not play or display depending on the content. parameters, use the Numeric buttons to enter figures such as dates and times.
10 11
Specifications
terrestrial channel or video signal. AV cable. Standby Voltage/Hi-Pot I/p to O/p:3KV(1 min)
The RCU is not working. Out of battery Change the battery Temperature Rise <75 on winding&core;<50 on casting At 264Vac@50Hz
RCU is aimed at wrong direction Aim the RCU at the unit, and remove Safety Standard Designed to meet MEPS
obstacles between the front panel
and RCU
Note: If you still cannot resolve the problem with above reference, please contact TEAC Support Hotline 1300 553
315.
12 13
14