Professional Documents
Culture Documents
ZX-3 ALL-204 Distribution of ZX-3 DR ZX (PALM VERSION) Servi
ZX-3 ALL-204 Distribution of ZX-3 DR ZX (PALM VERSION) Servi
Page 1 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
SUBJECT LX ALL-211
OUTLINE
This explains how to download and install the Dr. ZX (Palm version) software that is compatible
with ZX-3 and ZW models (wheel loader).
Please download this service software from Global e-Service/e-Cabinet.
To search for the service software in e-Cabinet, specify the Identifier No. SY00010423/Language
(English).
The software that is downloaded from e-Cabinet contains MIC-DataViewer (Ver2.5.0.4).
Download instructions on how to use the MIC-DataViewer from the Global e-Service/MIC download
site.
This software is also compatible with models older than ZX-1.
Thoroughly read the safety section in the service manual before starting the work to ensure safe operation.
Welding work, if any, should only be done by qualified welders.
DESCRIPTION
DWN
CHKD
SA/GI: ZX-3 ALL-009 WHITE APPD
CONFIDENTIAL
Page 2 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
APPLICABLE SERIAL NUMBERS LX ALL-211
㪱㪯㪄㪊㩷㪚㫉㪸㫎㫃㪼㫉㩷㪪㪿㫆㫍㪼㫃 㪱㪯㪄㪊㩷㪚㫉㪸㫎㫃㪼㫉㩷㪪㪿㫆㫍㪼㫃
㩿㪛㫆㫄㪼㫊㫋㫀㪺㩷㫊㪸㫃㪼㫊㪄㫄㪸㪺㪿㫀㫅㪼㩷㫆㫉㩷㪡㫆㪿㫅㩷㪛㪼㪼㫉㪼㩷㫊㪸㫃㪼㫊㪄㫄㪸㪺㪿㫀㫅㪼㪀 㩿㪜㫌㫉㫆㫇㪼㩷㫊㪸㫃㪼㫊㪄㫄㪸㪺㪿㫀㫅㪼㪀
㪧㫉㫆㪻㫌㪺㫋㩷㫅㪸㫄㪼 㪤㫆㪻㪼㫃㩷㪺㫆㪻㪼 㪩㪼㫄㪸㫉㫂㫊 㪧㫉㫆㪻㫌㪺㫋㩷㫅㪸㫄㪼 㪤㫆㪻㪼㫃㩷㪺㫆㪻㪼 㪩㪼㫄㪸㫉㫂㫊
㪱㪯㪉㪋㪇㪄㪊 㪱㪯㪉㪌㪇㪣㪚㪄㪊
㪈㪭㪈 㪙㪝㪤
㪱㪯㪉㪋㪇㪣㪚㪄㪊 㪱㪯㪉㪌㪇㪣㪚㪥㪄㪊
㪱㪯㪉㪌㪇㪟㪄㪊 㪱㪯㪉㪏㪇㪣㪚㪄㪊
㪈㪭㪉 㪙㪝㪢
㪱㪯㪉㪌㪇㪣㪚㪟㪄㪊 㪱㪯㪉㪏㪇㪣㪚㪥㪄㪊
㪱㪯㪉㪌㪇㪢㪄㪊 㪱㪯㪊㪌㪇㪣㪚㪄㪊
㪈㪭㪊 㪙㪝㪧
㪱㪯㪉㪌㪇㪣㪚㪢㪄㪊 㪱㪯㪊㪌㪇㪣㪚㪥㪄㪊
㪱㪯㪉㪎㪇㪄㪊 㪱㪯㪋㪌㪇㪄㪊
㪈㪭㪋 㪈㪡㪈
㪱㪯㪉㪎㪇㪣㪚㪄㪊 㪱㪯㪋㪌㪇㪣㪚㪄㪊
㪱㪯㪋㪎㪇㪟㪄㪊
㪱㪯㪋㪎㪇㪣㪚㪟㪄㪊
㪱㪯㪉㪏㪇㪣㪚㪟㪄㪊 䋱㪭㪘 㪈㪡㪉
㪱㪯㪋㪎㪇㪩㪄㪊
㪱㪯㪋㪎㪇㪣㪚㪩㪄㪊
㪱㪯㪊㪊㪇㪄㪊
㪈㪭㪎 㪱㪯㪌㪇㪇㪣㪚㪄㪊 㪈㪡㪌
㪱㪯㪊㪊㪇㪣㪚㪄㪊
㪱㪯㪊㪌㪇㪟㪄㪊 㪱㪯㪌㪉㪇㪣㪚㪟㪄㪊
㪈㪭㪏 㪈㪡㪍
㪱㪯㪊㪌㪇㪣㪚㪟㪄㪊 㪱㪯㪌㪉㪇㪣㪚㪩㪄㪊
㪱㪯㪊㪌㪇㪢㪄㪊
㪈㪭㪐 㪱㪯㪍㪌㪇㪣㪚㪄㪊 㪈㪡㪎
㪱㪯㪊㪌㪇㪣㪚㪢㪄㪊
㪱㪯㪋㪌㪇㪄㪊 㪱㪯㪍㪎㪇㪣㪚㪟㪄㪊
㪈㪡㪈 㪈㪡㪏
㪱㪯㪋㪌㪇㪣㪚㪄㪊 㪱㪯㪍㪎㪇㪣㪚㪩㪄㪊
㪱㪯㪋㪎㪇㪟㪄㪊
㪱㪯㪋㪎㪇㪣㪚㪟㪄㪊 㪱㪯㪏㪌㪇㪄㪊
㪈㪡㪉 㪈㪡㪙
㪱㪯㪋㪎㪇㪩㪄㪊 㪱㪯㪏㪌㪇㪣㪚㪄㪊
㪱㪯㪋㪎㪇㪣㪚㪩㪄㪊
㪱㪯㪏㪎㪇㪟㪄㪊
㪥㫆㫉㫋㪿㩷㪘㫄㪼㫉㫀㪺㪸 㪱㪯㪏㪎㪇㪣㪚㪟㪄㪊
㪱㪯㪋㪌㪇㪣㪚㪄㪊 㪈㪡㪊 㪈㪡㪚
㪟㫀㫋㪸㪺㪿㫀㩷㫄㫆㪻㪼㫃 㪱㪯㪏㪎㪇㪩㪄㪊
㪱㪯㪏㪎㪇㪣㪚㪩㪄㪊
㪡㪛㪋㪌㪇㪛㪣㪚 㪈㪡㪋 㪡㪛㩷㫄㫆㪻㪼㫃
㪱㪯㪌㪇㪇㪣㪚㪄㪊 㪈㪡㪌
㪱㪯㪌㪉㪇㪣㪚㪟㪄㪊
㪈㪡㪍
㪱㪯㪌㪉㪇㪣㪚㪩㪄㪊
㪱㪯㪍㪌㪇㪣㪚㪄㪊 㪈㪡㪎
㪱㪯㪍㪎㪇㪣㪚㪟㪄㪊
㪈㪡㪏
㪱㪯㪍㪎㪇㪣㪚㪩㪄㪊
㪥㫆㫉㫋㪿㩷㪘㫄㪼㫉㫀㪺㪸
㪱㪯㪍㪌㪇㪣㪚㪄㪊 㪈㪡㪐
㪟㫀㫋㪸㪺㪿㫀㩷㫄㫆㪻㪼
㪡㪛㪍㪌㪇㪛㪣㪚 㪈㪡㪘 㪡㪛㩷㫄㫆㪻㪼㫃
㪱㪯㪏㪌㪇㪄㪊
㪈㪡㪙
㪱㪯㪏㪌㪇㪣㪚㪄㪊
㪱㪯㪏㪎㪇㪟㪄㪊
㪱㪯㪏㪎㪇㪣㪚㪟㪄㪊
㪈㪡㪚
㪱㪯㪏㪎㪇㪩㪄㪊
㪱㪯㪏㪎㪇㪣㪚㪩㪄㪊
㪥㫆㫉㫋㪿㩷㪘㫄㪼㫉㫀㪺㪸
㪱㪯㪏㪌㪇㪣㪚㪄㪊 㪈㪡㪛
㪟㫀㫋㪸㪺㪿㫀㩷㫄㫆㪻㪼㫃
㪡㪛㪏㪌㪇㪛㪣㪚 㪈㪡㪜 㪡㪛㩷㫄㫆㪻㪼㫃
㪡㪛㪉㪋㪇㪛㪣㪚 㪡㪛㩷㫄㫆㪻㪼㫃
㪡㪛㪉㪎㪇㪛㪣㪚 㪡㪛㩷㫄㫆㪻㪼㫃
㪡㪛㪊㪌㪇㪛 㪡㪛㩷㫄㫆㪻㪼㫃
㪱㪮㩷㪮㪿㪼㪼㫃㩷㪣㫆㪸㪻㪼㫉 㪱㪮㩷㪮㪿㪼㪼㫃㩷㪣㫆㪸㪻㪼㫉
㩿㪛㫆㫄㪼㫊㫋㫀㪺㩷㫊㪸㫃㪼㫊㪄㫄㪸㪺㪿㫀㫅㪼㩷㫆㫉㩷㪾㪼㫅㪼㫉㪸㫃㩷㫆㫍㪼㫉㫊㪼㪸㫊㪄㫊㪸㫃㪼㫊㩷㫄㪸㪺㪿㫀㫅㪼㪀 㩿㪜㫌㫉㫆㫇㪼㩷㫊㪸㫃㪼㫊㪄㫄㪸㪺㪿㫀㫅㪼㪀
㪧㫉㫆㪻㫌㪺㫋㩷㫅㪸㫄㪼 㪤㫆㪻㪼㫃㩷㪺㫆㪻㪼 㪩㪼㫄㪸㫉㫂㫊 㪧㫉㫆㪻㫌㪺㫋㩷㫅㪸㫄㪼 㪤㫆㪻㪼㫃㩷㪺㫆㪻㪼 㪩㪼㫄㪸㫉㫂㫊
㪱㪮㪉㪉㪇 㪋㪞㪙 㪱㪮㪉㪉㪇 㪋㪞㪝
㪱㪮㪉㪌㪇 㪋㪞㪚 㪱㪮㪉㪌㪇 㪋㪞㪞
㪱㪮㪊㪈㪇 㪋㪟㪘 㪱㪮㪊㪈㪇 㪋㪟㪝
CONFIDENTIAL
Page 3 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
LX ALL-211
1 PRE-INSTALLATION PREPARATION
1-1. For the installation task, the administrative rights need to be released. Make sure to release the rights in advance.
1-3. If you don't have a "Palm Desktop" or "CLIE Palm Desktop" shortcut icon on the desktop window of the PC, install
the software onto the PC by using either the CD-ROM that comes with the Palm or CLIE. Then proceed to 1-4.
1-4. If the current Dr. ZX service software version is already installed onto the Palm or CLIE and PC, start from 1- 1
below.
1-5. If the current Dr. ZX service software version is installed onto the PC only, start from 1- 2 .
1-6. If you are installing Dr. ZX for the first time, start from 2. Installation method.
CONFIDENTIAL
Page 4 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
LX ALL-211
1-6. If you are installing Dr. ZX for the first time, start from 2. Installation method.
1 The Palm onto which the current Dr. ZX service software application has been installed
If the downloaded Dr. data is still found on the Palm, hot sync and after backing up the data, carry out the proce-
dure as shown below.
If you don't hot sync, the downloaded data will also be deleted.
· If the current Dr. ZX service software version has been installed onto the Palm, delete it and then, reinstall the
new Dr. ZX service software.
· Deletion procedure
a. Tap around the circle.
c. The following window will be displayed. Choose the Dr. ZX related applications and tap "Delete."
* The applications to be deleted are those that begin with Dr. , EPVC , HMS and PZX .
(However, don't delete the security-related applications that begin with Dr, EPVC, HMS or PZX (see caution
below).)
Page 5 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
LX ALL-211
d. Once all the applications have been deleted, tap "Done" and return to
the Palm menu window.
· If the Dr. ZX icon is no longer found on the Palm menu window, it means that the installation preparation has been
completed.
Page 6 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
LX ALL-211
2 If the existing Dr. ZX service software has already been installed onto the PC, carry out the following.
2 -1. Right-click the lower left hand side of the PC (start) to refer to Explorer ~ Program files.
If "C:¥Program Files¥HitachiMonitoringSystem¥HMS_Conduit" exists, carry out the following.
Page 7 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
LX ALL-211
2 -2. Right-click the lower left hand side of the PC (start) to refer to the Explorer ~ Program files.
If "C:¥Program Files¥MachineInformationCenter¥Palm" is found, implement the following, delete
the program and proceed to 2. Installation method.
b. The next task depends on what support information version you have. Click "Click here for support information"
circled in red to confirm the version.
CONFIDENTIAL
Page 8 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
LX ALL-211
c. Confirm the support information version. If this version is 2.05.0001, carry out the following (1) and (2) and
proceed to "d."
For all other versions, proceed to "d."
(1) Double-click "DataBackUp1.exe" in the installer folder that was downloaded from the server.
CONFIDENTIAL
Page 9 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
LX ALL-211
* Double-click "DataBackUp1.exe" to display the following window. If the window closes, it means that the action
has been completed.
d. Click "Change/Remove."
CONFIDENTIAL
Page 10 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
LX ALL-211
e. The InstallShield Wizard will start up. Choose "Remove" and click "Next."
Page 11 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
LX ALL-211
2 -3. If there is no item, "Machine Information Center for Dealer" in the "Add/Remove" window, run all files that
are either titled "uninstall.exe" or begin with "un" as "un*****.exe" in the
"C:¥Program Files¥MachineInformationCener¥Palm¥Installer" folder, and manually delete the
folders as shown below.
C:¥Program Files¥MachineInformationCenter¥Palm
(Right-click the folder (Palm) to delete. Delete all the folders.)
CONFIDENTIAL
Page 12 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
LX ALL-211
2 INSTALLATION METHOD
1 Double-click "Autorun.exe" in the downloaded installer folder. The following window will be displayed. Choose the
language for the installer menu.
3 The following dialog will be displayed. Select the language of the application to be installed and click "OK."
CONFIDENTIAL
Page 13 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
4 Installation preparation will begin. FILING LOCATION
ZX-3 ALL-204
LX ALL-211
Page 14 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
LX ALL-211
9 The following dialog will be displayed. Caution: In the event the dialog is not displayed in 9 and
instead, the following window is displayed, click "Exit."
Then, dialog 9 will be displayed.
Page 15 of 15
SERVICE BULLETIN CODE
DESCRIPTION 3 2006 053
FILING LOCATION
ZX-3 ALL-204
LX ALL-211
13 Click "Exit" and finish the Installer.
15 When the following dialog is displayed, enter the "office code," "name number" and "remarks" successively as
shown in the example and press "Register." (This completes the task.)